Loading...
Site Monitoring
For Business-Critical Continuity™ 
Liebert® ISWEBRT3™ 
User Manual
TABLE OF CONTENTS
1.0 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
1.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.2 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.2.1 Liebert IS-WEBRT3 Card Web Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.2.2 Liebert Web Card Provides Shutdown Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2.0 WHAT’S INCLUDED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
3.0 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
4.0 USING DESKPRO-NET UTILITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
4.1 Launch the Liebert IS-WEBRT3 Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
4.2 Configure the Liebert IS-WEBRT3 Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
4.3 Advanced Liebert Web Card UPS Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4.3.1 Enable DeskPro Net Password or Management Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4.3.2 Download Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4.3.3 Refresh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
5.0 UPS WEB MANAGEMENT BY LIEBERT IS-WEBRT3 CARD . . . . . . . . . . . . . . . . . . . . . . . . .7
5.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
5.2 Liebert IS-WEBRT3 Card UPS Web Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
5.2.1 Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5.2.2 Basic Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5.2.3 Current Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
5.2.4 Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5.2.5 Meter/Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5.3 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
5.3.1 UPS Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
5.3.2 UPS On/Off Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
5.3.3 Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
5.3.4 SNMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
5.3.5 WEB/Telnet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
5.3.6 System Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
5.3.7 Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5.4 Log Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5.4.1 Event Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5.4.2 Data Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
5.4.3 Save Data Log. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
5.5 Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
5.5.1 About . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
i
6.0 TELNET—REMOTE MONITORING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
6.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
6.2 Telnet Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
FIGURES
Figure 1 Liebert IS-WEBRT3 card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Figure 2 Liebert IS-WEBRT3 installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Figure 3 Installation steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Figure 4 Liebert DeskPro-Net Utility main window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Figure 5 Network settings window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Figure 6 Advanced setting of Liebert IS-WEBRT3 card UPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Figure 7 Update Liebert IS-WEBRT3 card firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Figure 8 Input Liebert IS-WEBRT3 card UPS IP address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Figure 9 Liebert IS-WEBRT3 card UPS login dialog. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Figure 10 System status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Figure 11 Basic information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Figure 12 Current status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Figure 13 Remote control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Figure 14 Meter/Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Figure 15 UPS configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Figure 16 UPS On/Off schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Figure 17 Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Figure 18 SNMP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Figure 19 E-mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Figure 20 WEB/Telnet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Figure 21 System time setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Figure 22 Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Figure 23 Event log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Figure 24 Date log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Figure 25 Save data log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Figure 26 Help screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Figure 27 Telnet startup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Figure 28 Telnet connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Figure 29 Liebert IS-WEBRT3 card Telnet window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
ii
Introduction
1.0INTRODUCTION
1.1Features
The Liebert IS-WEBRT3 card is a new generation SNMP (Simple Network Management Protocol) UPS monitoring product. The card permits remote control of the UPS and enables reporting its current status.
The Liebert IS-WEBRT3 card is simple and easy to install: insert the card into a compatible UPS, install the Liebert DeskPro-Net™ software on the included CD on a Windows® operating system and configure the IP address. All other configuration may be done with a Web browser.
The Liebert IS-WEBRT3 card also provides shutdown, using Liebert MultiLink™, for different operating systems. It can be configured to send a shutdown command for such events as utility power failure and low battery.
1.1.1Features
•Provides SNMP MIB to monitor and control UPS
•Auto-senses 10M/100M fast Ethernet
•Manages and configures via Telnet, Web browser or NMS
•Supports TCP/IP, UDP, SNMP, Telnet, SNTP, PPP, HTTP, SMTP protocol
•Sends both SNMP traps and e-mails for event notification
•Automatically e-mails a daily UPS history
•Matches with shutdown software to protect computer’s file saving and shut down safely
1.2Applications
1.2.1Liebert IS-WEBRT3 Card Web Interface
The system administrator can use a Web browser to check the status of all UPSs where a Liebert IS-WEBRT3 has been installed. The administrator can access a UPS by entering its IP address in the browser. When utility power surges, sags or fails, the Liebert IS-WEBRT3 can, if so configured, also send the trap information to the system manager to take proper action.
1.2.2Liebert Web Card Provides Shutdown Utilities
A computer on the network with the Liebert IS-WEBRT3 card and DeskPro-Net Utility installed can locate all Liebert IS-WEBRT3 cards on the network. Liebert MultiLink can be set up to close open files and perform a graceful system shutdown when a UPS with a Liebert IS-WEBRT3 card experiences an input power failure or low battery.
Liebert MultiLink
Liebert MultiLink software is available at multilink.liebert.com
User manuals for Liebert MultiLink are available at the Liebert Web site: multilink.liebert.com
1
What’s Included
2.0WHAT’S INCLUDED
•Liebert IS-WEBRT3 card
•Liebert Web Card CD, including:
•DeskPro-Net Utility: Configure Liebert Web Card UPS IP address, update firmware
•Liebert IS-WEBRT3 card user manual, SL-52665
•Liebert IS-WEBRT3 card MIB
Figure 1 Liebert IS-WEBRT3 card
2
Installation
3.0INSTALLATION
Before using the Liebert Web Card, the hardware and software configuration is necessary.
1.Install the Liebert IS-WEBRT3 card in the Liebert IntelliSlot® bay on the UPS. The bay may be protected with a plastic cover.
2.Attach an RJ-45 Ethernet cable, CAT5 or better, to the card and to your network.
3.Install Liebert DeskPro-Net Utility on your computer.
a.Insert the included DeskPro-Net Utility CD in the monitoring computer.
b.Follow the prompts to install the software.
After complete installation, DeskPro-Net Utility will appear in Start>Programs.
Figure 2 Liebert IS-WEBRT3 installation
Insert the Liebert |
|
IS-WEBRT3 card |
Connect a network |
|
cable to the Liebert |
|
IS-WEBRT3 card |
Figure 3 Installation steps
Connect the Liebert IS -WEBRT3
Card, UPS and Network
Set up the Liebert IS -WEBRT3
Card’s IP Address Using
DeskPro-Net Utility
Use a Web Browser to Connect to
Liebert IS-WEBRT3 Card
by its IP Address
Use Telnet to Configure the Liebert
IS-WEBRT3 Card UPS Settings
Use DeskPro-Net Utility to Connect
to Liebert IS -WEBRT3 Card
3
Using DeskPro-Net Utility
4.0USING DESKPRO-NET UTILITY
DeskPro-Net Utility’s main window is shown in Figure 4. The left side of the window shows the main functions. The list at right shows the Liebert IS-WEBRT3 cards found on the network.
Figure 4 Liebert DeskPro-Net Utility main window
Search for Liebert IS-WEBRT3 cards 
on network
4.1Launch the Liebert IS-WEBRT3 Card
1.Start DeskPro-Net Utility by clicking on Start>Programs>DeskPro-Net Utility.
2.Click Launch Device or double-click a Liebert IS-WEBRT3 card in the table to launch it.
3.Logon to the card by entering the Account (Login Name) and Password (Login Password) set earlier. If an account and password have not been set, click Apply to login.
4.2Configure the Liebert IS-WEBRT3 Card
1.Select the Liebert IS-WEBRT3 card from the right side of the screen and click Configure; the window in Figure 5 opens.
2.If using a static IP address, set the card’s IP address, subnet mask and gateway. See your network administrator for the settings.
3.After making the settings, open a Web browser, such as Microsoft’s Internet Explorer®.
4.Enter the card’s IP address to connect to the card’s Web interface.
Figure 5 Network settings window
Check either button if 
allowing the system to 
set the card’s IP address
If using a static IP address,
click this button and enter the settings below
The Liebert IS-WEBRT3 card can be used with DHCP or BOOTTP, permitting the system to assign an IP address, Subnet Mask and Gateway.
4
Using DeskPro-Net Utility
4.3Advanced Liebert Web Card UPS Setting
DeskPro-Net Utility provides two security functions:
•DeskPro Net Password
•Management Protocol
4.3.1Enable DeskPro Net Password or Management Protocol
To enable the password function:
1.Start DeskPro-Net Utility by clicking on Start>Programs>DeskPro-Net Utility.
2.Click the Configure function and select the Advanced tab.
3.Enter a password in the first box and enter it a second time as confirmation in the box below.
NOTE
After setting a password, write it down and keep it accessible: Without the password, it will not be possible to give any commands to the Liebert IS-WEBRT3 card using DeskPro-Net Utility software
To enable the Management Protocol function:
1.Start DeskPro-Net Utility by clicking on Start>Programs>DeskPro-Net Utility.
2.Click the Configure function and select the Advanced tab.
3.Check the boxes to enable the HTTP and Telnet function and enter port numbers.
The Liebert IS-WEBRT3 card UPS provides HTTP(WEB) and Telnet to reference any related parameter setting for the manager. Concerning security, the manager could use any advanced port setting with the above two methods. Followings are the descriptions:
1.At advanced setting, two functions were set as activated by using port number 80 and 23.
2.If the boxes are unchecked, the functions will not be available.
3.When set to the other port value, the full IP address must be entered in order to login to the website or Telnet.
For example,
•If “81” is set as the HTTP port number, then http://192.168.0.177:81 must be typed as the Web address to connect to Liebert IS-WEBRT3 card UPS’s interface.
•If “24” is set as the Telnet port number, then 192.168.0.177 24 must be typed at Telnet to proceed to the Telnet screen of Liebert IS-WEBRT3 card.
Figure 6 Advanced setting of Liebert IS-WEBRT3 card UPS
5
Loading...