How it Works
LG
Loading...
NB2030A
User Guide [pt]
12 pgs441.21 Kb0
User Manual
18 pgs2.15 Mb0
User Manual
16 pgs1.82 Mb0
User Manual [es]
16 pgs1.78 Mb0

LG NB2030A User Manual

Download
Please read this manual carefully before operating your set and retain it for future reference.
ENGLISH
OWNER’S MANUAL
Sound Bar
NB2030A
www.lg.com
1 Getting Started
Getting Started
2
Safety Information
1
Getting Started
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands
after handling.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects lled with liquids, such as vases, should be placed on the apparatus.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sucient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
WARNING: Do not install this equipment in a conned space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings shall be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a built­in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instruction has been adhered to.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit;
That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specication page of this owner’s manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or re. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. To disconnect power from the mains, pull out the mains cord plug. hen installing the product, ensure that the plug is easily accessible.
Getting Started
This device is equipped with a portable battery or accumulator.
Safety way to remove the battery or the battery from the equipment: Remove the
old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points. Do not dispose of batteries or battery together with other waste. It is recommended that you use local, free reimbursement systems batteries and accumulators. The battery shall not be exposed to excessive heat such as sunshine, re or the like.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power­supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
3
1
Getting Started
Getting Started
4
FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
1
(1) This device may not cause harmful interference,
Getting Started
and (2) This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
yReorient or relocate the receiving antenna.
yIncrease the separation between the equipment
and receiver.
yConnect the equipment into an outlet on a
circuit dierent from that to which the receiver is connected.
yConsult the dealer or an experienced radio/TV
technician for help.
CAUTION : Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
FCC WARNING: This equipment may generate or use radio frequency energy. changes or modications to this equipment may cause harmful interference unless the modications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modication is made.
Table of Contents
1
2
3
4
5
Table of Contents
5
1 Getting Started
2 Safety Information 6 Accessories 6 Introduction 6 – Symbols Used in this Manual 7 Remote control 8 Top panel 8 Rear panel 9 Installing the sound bar 9 Installing the cover foot
2 Connecting
10 Mounting the main unit on a wall 11 Optional Equipment Connection 11 – OPTICAL In connection
3 Operating
12 Operations 12 – DRC (Dynamic Range Control) 12 – AV Sync 12 – AUTO POWER DOWN 12 – AUTO POWER On/Off 12 – Turn off the sound temporarily 13 – LG Sound Sync 14 Controlling a TV with the Supplied
Remote Control
4 Troubleshooting
15 Troubleshooting
5 Appendix
16 Trademarks and Licenses 16 Maintenance 16 – Handling the Unit 17 Specifications
Getting Started
6
Accessories
Please check and identify the supplied accessories.
1
Getting Started
Remote control (1) Batteries (1)
Wall Mount Bracket Installation Template (1)
Optical cable (1) Cover foot (2)
Wall mount bracket (2)
Introduction
Symbols Used in this Manual
Note
,
Indicates special notes and operating features.
Caution
>
Indicates cautions for preventing possible damages from abuse.
Cable ties for arranging cables(2)
Getting Started
Remote control
Battery Installation
Remove the battery cover on the rear of the Remote Control, and insert battery with matched correctly.
and
• • • • • • • • • • a • • • • • • • • •
(Power): Switches the unit ON or OFF.
1
DRC (ON/ OFF) : Sets the DRC.
• • • • • • • • • • b • • • • • • • • •
: Mutes the sound.
VOL -/+ : Adjusts speaker volume.
AV SYNC -/+ : Synchronizes the audio and video.
Note
,
yWhen the volume reaches the highest/
lowest level and you push VOL+/- on the remote control again, red LED on the unit turns on for 2 seconds to signal on what the volume level is.
yWhen the unit turns on, volume of the unit
will rise gradually to the volume level set at the unit turned o.
• • • • • • • • • • c • • • • • • • • •
TV Control buttons: See page 14.
AUTO POWER (ON/OFF) : This function
automatically powers the unit ON/OFF.
7
1
Getting Started
Getting Started
8
Top panel
1
Getting Started
A 1 B
(Standby/On)
– / + (Volume)
Adjusts speaker volume.
Rear panel
Software Download Connector - Only for
A
service.
OPTICAL IN (TV)
B
Getting Started
9
Installing the sound bar
You can hear the sound by using optical cable connect the unit to the other device : TV, Blu-ray disc player, DVD player, etc.
Place the unit in front of the TV and connect it to the device. (Refer to page11)
Installing the cover foot
You can extend the height of the unit.
1. Turn the unit upside down.
2. Peel off a sticker attached to the cover foot.
Then place it on the existing foot of the unit.
3. Press the cover foot with adequate force to get it firmly fixed.
1
Getting Started
Getting Started
10
Mounting the main unit on a wall
1
You can mount the main unit on a wall.
Getting Started
Prepare screws and brackets.
Unit
2. When you mount it on a wall (concrete), use the wall plugs (Not supplied). You should drill holes. A guide sheet (Wall Mount Bracket Installation Template) is supplied to drill. Use the sheet to check the point to drill.
Wall Mount Bracket Installation Template
Wall Mount Bracket Installation Template
1. Match the TV’s BOTTOM EDGE of Wall Mount Bracket Installation Template with the bottom of TV and attach to the position.
Wall mount bracket
TV
Note
,
Screws and Wall Plugs are not supplied for mounting the unit. We recommend the Hilti (HUD-1 6 x 30) for the mounting.
2 Connecting
Connecting
3. Remove the Wall Mount Bracket Installation Template.
4. Fix the brackets with screws (not supplied) as shown in the illustration below.
5. Hang the main unit onto the bracket as shown below.
Note
,
Detach the unit from the bracket as shown below.
Optional Equipment Connection
OPTICAL In connection
Connect an optical output of external devices to the OPTICAL IN connector.
11
2
Connecting
To the digital optical output jack of external device
Caution
>
yDo not hang onto the installed unit and
avoid any impact to the unit.
ySecure the unit rmly to the wall so that it
does not fall o. If the unit falls o, it may result in an injury or damage to the product.
yWhen the unit is installed on a wall, please
make sure that a child does not pull any of connecting cables, as it may cause it to fall.
yDo not install this unit upside down. It can
damage the parts of this unit or be the cause of personal injury.
3 Operating
Operating
12
Operations
DRC (Dynamic Range Control)
Makes the sound clear when the volume is turned down (Dolby Digital only). Set to DRC by pressing DRC ON. To cancel DRC, press DRC OFF.
AV Sync
When receiving audio signals from TV, sound and images may not match. In that case, this function can adjust the delay time.
3
Use AV SYNC -/+ to scroll up and down through
Operating
the delay amount, which you can set between 0 and 300 ms.
Note
,
When the AV SYNC reaches the highest/lowest level and you push AV SYNC -/+ on remote control again, red LED on the unit turns on for 2 seconds to signal what the AV SYNC level is.
AUTO POWER On/Off
This function automatically turns on the unit when you turn on the external device (T V, DVD player, Blu-ray player etc.) connected to the unit by optical cable. Turn on this function by pressing AUTO POWER ON. To cancel it, press AUTO POWER OFF.
Note
,
If you don’t connect external device to the unit by optical cable or there is no digital input, the unit is turned o after 1 minutes when you turn on this function.
It is not available to turn on the unit by AUTO POWER function if you turn o it directly.
Turn off the sound temporarily
Press to mute your unit.
You can mute your unit, for example, to answer the telephone. To cancel it, press MUTE control or change the volume level.
again on the remote
AUTO POWER DOWN
This unit turns o automatically to save power consumption if no signal is transmitted to the unit for about 25 minutes.
But the unit can turn on automatically based on the [AUTO POWER] function you've set.
Note
,
Red LED on the unit blinks at intervals of 2 seconds to signal that the unit is in mute mode.
Operating
LG Sound Sync
You can control some functions of this unit by your TV's remote control with LG Sound Sync. It is compatible with the LG TV that is supported LG Sound Sync. Make sure of the LG Sound Sync logo on your TV.
Controllable function by LG TV's remote control : Volume up/down, mute.
Refer to the TV's instruction manual for the details of LG Sound Sync.
Make one of the following connections, depending on the capabilities of your equipment.
Note
,
You can also use the remote control of this unit while using LG Sound Sync. If you use TV's remote control again, the unit synchronizes with the TV.
When the connections failed, make sure of the condition of the TV and power of it.
Make sure of the condition of this unit and the connection in the cases below when using LG Sound Sync.
Turned o the unit.
Disconnecting the optical digital audio cable.
13
With wired connection
1. Connect your LG TV to the unit by using an optical digital cable.
Optical digital cable
3
Operating
2. Set up LG Sound Sync (Optical) on the TV. Refer to the TV's instruction manual.
3. Turn on the unit.
4. Select OPTICAL function.
When you finish the connection, show a
message on your TV.
Operating
14
Controlling a TV with the Supplied Remote Control
You can control your TV using the buttons below. (LG TV only.)
3
Operating
Button Operation
MUTE
INPUT
(TV POWER) Turn the TV on or o.
1
VOL +/–
PR/CH
w/s
Note
,
yDepending on the TV being connected, you
may not be able to control your TV using some of the buttons.
yThe remote control of the unit performs
basic operation of your TV. Please use the TV’s remote control to enjoy advanced operation of your TV.
Turn the TV’s volume on or o
Switch the TV’s input source between the TV and other input sources.
Adjust the volume of the TV.
Scan up or down through memorized channels.
4 Troubleshooting
Troubleshooting
Troubleshooting
PROBLEM CORRECTION
Plug in the power cord.
No Power
Check the condition by operating other electronic devices.
15
No sound
The remote
control does
not work properly.
The AUTO
POWER
function does
not work.
When you sense that outputted
sound of the
unit is low.
Check the OPTICAL IN connection.
The remote control is too far from the unit.
Operate the remote control within about 23 ft (7m).
There is an obstacle in the path of the remote control and the unit.
Remove the obstacle.
The battery in the remote control is exhausted.
Replace the batteries with new one.
Depending on the connected device by the optical cable, this function may not operate.
Check the details below and adjust the unit according to them.
ySwitch [ON] state of DRC function to [OFF] by using remote controller.
yWith the sound bar connected with TV, change the AUDIO DIGITAL OUT setting on TV
Setup Menu from [PCM] to [AUTO] or [BITSTREAM].
yWith the sound bar connected with Player, change the AUDIO DIGITAL OUT setting on
Player Setup Menu from [PCM] to [PRIMARY PASS-THROUGH] or [BITSTREAM].
yChange Audio DRC setting on Player setup menu to [OFF] state.
4
Troubleshooting
5 Appendix
Appendix
16
Trademarks and Licenses
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS 2.0 Channel is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
This product is manufactured under licence
5
Appendix
from Sontia Logic Limited and contains software which is protected under international copyright laws ©Sontia Logic Limited. All rights reserved. Sontia® and the Sontia wave logo are registered trademarks of Sontia Logic Limited.
Maintenance
Handling the Unit
When shipping the unit
Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory.
Keeping the exterior surfaces clean
yDo not use volatile liquids such as insecticide
spray near the unit.
yWiping with strong pressure may damage the
surface.
yDo not leave rubber or plastic products in
contact with the unit for a long period of time.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit.
Appendix
Specifications
General
Power requirements AC 120 V, 60 Hz
Power consumption 11 W
Dimensions (W x H x D)
Net Weight (Approx.) 2.6 kg (5.7 lbs)
Operating temperature 41 °F to 95 °F (5 °C to 35 °C)
Operating humidity 5 % to 90 %
Inputs
DIGITAL IN (OPTICAL IN) 3 V (p-p), Optical jack x 1
Amplier
Stereo mode 20 W + 20 W (6 Ω at 1 kHz)
Designs and specications are subject to change without prior notice.
899.2 mm x 58.4 mm x 83.8 mm (35.4 inches x 2.3 inches x 3.3 inches)
17
5
Appendix
LG Customer Information Center
1-800-243-0000 USA, Consumer 1-888-865-3026 USA, Commercial
Register your product Online!
www.lg.com
Printed in China
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use