MFL6765 |
|
8574 |
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SEC. |
|
|
|
PRINTING DEGREE |
LGMODEL |
BUYER |
PAGE |
REMARK |
|
|
WORK |
BRAND |
MODEL |
P/NO. |
EXTERIER |
INTERIER |
||||||
|
|
01 |
LG |
F1069FDF |
MFL67658574 |
1 |
1 |
FH069FDF |
LGEAU |
85 |
FH069FDF.ASSREAP |
|
|
|
|
|
|
F1069FD4F |
|
|
|
FH069FD4F |
|
|
FH069FD4F.ASSREAP |
|
|
|
|
|
|
|
|
|
|
FH069FD6F.ASSREAP |
||
|
|
|
|
|
F1069FD6F |
|
|
|
FH069FD6F |
|
|
|
|
|
|
|
|
|
|
|
|
|
FH069FD7F.ASSREAP |
||
|
|
|
|
|
F1069FD7F |
|
|
|
FH069FD7F |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
RELEASING THIS DRAWING WITHOUT PERMISSION LG Electronics SHOULD BE ACCUSED ACCORDING TO THE LAWS AND COMPANY RULES.
LG .
<BACK> |
<FRONT> |
<![endif]>210
P/NO.
148 |
148 |
|
|
<<>>
1.: 80g
1)G/S(LG) BRAND(FIG1) : * - 1 : LG RED PANTONE #207
-2 : LG GRAY PANTONE #430 * - 1 : BLACK
2)OEM BRAND(FIG2) : * - 1 : BLACK * - 1 : BLACK
3.FILM .
4.( ) .
5..
:, LG(63)-A-5501-34.
<<NOTES >>
1.Material : Vellum paper
2.Print work
1)G/S(LG) BRAND(FIG1) : * Cover - First color : LG Red Pantone #207
-Second color : LG GRAY PANTONE #430 * Inside - First color : Black
2)OEM BRAND(FIG2) : * Cover - First color : Black * Inside - First color : Black
3.Printing, text size and line are based on LG design film.
4.Size will Follow the standard.
5.Before product controlled by criteria sample.
|
|
|
|
|
|
|
|
|
|
|
|
6. Standard of supervision for hazardous material |
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
: The part should not contain prohibited substances(Pb,Cd,Hg,Cr+6,PBB,PBDE) |
DR COMPLETED |
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
and details should comply with LG standard of LG(63)-A-5501-34. |
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DR |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SCALE 1 |
|
|
|
ILLUSTRATOR |
: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TRIG. |
|
UNIT |
mm |
1 |
T |
MANUAL,OWNER’S |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
MODELING DESIGNED |
REVIEWED |
CHECKED |
APPROVED |
I |
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
T |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
L |
GIANT-C PRO (W)-PJT |
1/1 |
||||||
1 |
FH069* → F1069* |
EAGH800702 |
17/08/28 |
|
|
5 |
|
|
|
|
|
17.07.11 |
|
17.07.11 |
17.07.11 |
|
E |
||||||
2 |
|
|
|
|
|
6 |
|
|
|
|
|
LG |
( ) |
|
RELATED DWG. |
|
|
MFL67658574 |
|||||
3 |
|
|
|
|
|
7 |
|
|
|
|
|
|
|
DWG. |
|||||||||
4 |
|
|
|
|
|
8 |
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
LG Electronics Inc. |
|
|
|
|
No. |
||||||||
REV. NO. |
REVISION DESCRIPTION |
REF. NO. |
DATE |
PREPARED APPROVED REV. NO. |
REVISION DESCRIPTION |
REF. NO. |
DATE |
PREPARED APPROVED |
|
|
|
|
|||||||||||
|
|
|
/ / |
|
|
|
|
|
/ / |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OWNER’S MANUAL
COMMERCIAL WASHER
Before beginning installation, read these instructions carefully.
This will simplify installation and ensure that the washer is installed correctly and safely. Leave these instructions near the
washer after installation for future reference.
MODEL F1069FDF/F1069FD4F/F1069FD6F/F1069FD7F
www.lg.com
MFL67658574 |
Copyright © 2017 LG Electronics Inc. All Rights Reserved |
2 PRODUCT FEATURES
PRODUCT FEATURES
DIRECT DRIVE SYSTEM
The advanced brushless DC motor drives the drum directly without using a belt and pulley.
TILTED DRUM AND EXTRA LARGE DOOR OPENING
The tilted drum and extra large opening make it possible to load and unload clothing more easily.
ULTRA CAPACITY
The larger drum enables more tumbling action and greater centrifugal force, but also less tangling and wrinkling of the laundry. Heavier loads, such as king size comforters, blankets, and curtains can be washed.
SEE-THROUGH DOOR AND BIG DOOR
You can see the laundry throughout the cycle.
MAGNETIC DOOR PLUNGER
Safely and conveniently secure the door slightly ajar with the magnetic door plunger. This will promote air circulation and allow the interior of the machine to dry. To use this feature, after the load has been removed, do not close the door completely. When the magnetic door plunger comes into contact with the metal washer cabinet, it will secure the door slightly open allowing the interior of the washer to dry.
STAINLESS STEEL DRUM
Stainless steel drum offers extreme durability.
TUB CLEAN
Regular cleaning of the tub on a monthly basis using TUB CLEAN can help keep the tub clean and fresh.
IMPORTANT SAFETY INSTRUCTIONS 3
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
Warning
For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death.
Your Safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word DANGER, WARNING or CAUTION. These words mean:
DANGER
You will be killed or seriously injured if you don’t immediately follow instructions.
Warning
You can be killed or seriously injured if you don’t follow instructions.
CAUTION
You may be slightly injured or cause damage to the product if you do not follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
4 IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
Warning
For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack
of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
Children of less than 3 years should be kept away unless continuously supervised.
IMPORTANT SAFETY INSTRUCTIONS 5
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
Warning
For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death.
BASIC SAFETY PRECAUTIONS
Warning
To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following.
•Read all instructions before using the washer.
•Do not wash articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry cleaning solvents, or other flammable or explosive substances, as they give off vapors that could ignite or explode.
•Do not add gasoline, dry cleaning solvents, or other flammable or explosive substances to the wash water.
These substances give off vapors that could ignite or explode.
•Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using the washing machine, turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.
•Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used near children.
•Before the washer is removed from service or discarded, remove the door to prevent children from hiding inside.
•Do not install or store the washer where it will be exposed to the weather.
•Do not tamper with the controls.
•Do not repair or replace any part of the washer or attempt any servicing unless specifically recommended in the user-maintenance instructions or published user-repair instructions that you understand and have the skills to carry out.
•See Installation Instructions for grounding requirements.
•ALWAYS follow the fabric care instructions supplied by the garment manufacturer.
•Do not place items exposed to cooking oil in your washer. Items contaminated with cooking oils may contribute to a chemical reaction that could cause a load to catch fire.
•Do not use fabric softeners or products to eliminate static unless recommended by the manufacturer of the fabric softener or product.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
•Do not use an adapter or extension cord.
•Do not remove ground prong.
•If you don’t have the proper outlet, consult an electrician.
Warning
Improper connection of the equipment-grounding conductor can result in risk of electric shock. Consult a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance - if it does not fit the outlet, have a proper outlet installed by a qualified electrician.
6 IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
Warning
For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death.
SAFETY INSTRUCTIONS FOR INSTALLATION
Warning
To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following.
•Refer to INSTALLATION INSTRUCTIONS for detailed grounding procedures. Installation instructions are packed in the washer for installer's reference. If the washer is moved to a new location, have it checked and reinstalled by a qualified service person. Failure to follow this warning can cause serious injury, fire, electric shock or death.
•Do not, under any circumstances cut or remove the third (ground) prong from the power cord. Failure to follow this warning can cause serious injury, fire, electric shock or death.
•For personal safety, this appliance must be properly grounded. Failure to follow this warning can cause serious injury, fire, electric shock or death.
•The power cord of this appliance is equipped with a 3-prong (grounding) plug which fits a standard 3-prong (grounding) wall outlet to minimize the possibillty of electric shock hazard from this appliance.
•This washer must be plugged into a 220-240 V~, 50 Hz grounded outlet. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
•Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.
Failure to follow this warning can cause serious injury, fire, electric shock, or death.
•Where a standard 2-prong wall outlet is encountered, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.
Failure to follow this warning can cause serious injury, fire, electric shock, or death.
•Do not install on carpet. Install the washer on a solid floor. Failure to follow this warning can cause serious leak damage.
•Do not remove the ground prong. Do not use an adapter or extension cord. Plug into a grounded 3 prong outlet. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
•The washer should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate. This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.
•Never unplug your washer by pulling on the power cord. Always grip the plug firmly and pull straight out from the outlet. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
•Repair or replace all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end. Failure to follow this warning can cause serious injury, fire, electric shock,or death.
•When installing or moving the washer, be careful not to pinch, crush, or damage the power cord.
Failure to follow this warning can cause serious injury, fire, electric shock, or death.
•The washer must be installed and electrically grounded by a qualified service person in accordance with local codes, to prevent shock hazard and assure stability during operation.
•The washer is heavy. Two or more people are needed to install and move the appliance. Failure to do so can result in back or other injury
•Store and install the washer where it will not be exposed to temperatures below freezing or
exposed to outdoor weather conditions. Failure to follow this warning can cause serious leak damage.
•Do not install the washer in humid spaces to reduce the risk of electric shock. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
•To reduce the risk of injury to persons, adhere to all industry recommended safety procedures including the use of long sleeved gloves and safety glasses.
Failure to follow all of the safety warnings in this manual could result in property damage, injury to persons or death.
•Keep the area underneath and around your appliances free of combustible materials such as lint, paper, rags, chemicals, etc. Failure to do so can result in fire.
IMPORTANT SAFETY INSTRUCTIONS 7
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
Warning
For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death.
SAFETY INSTRUCTIONS FOR USE, CARE, CLEANING, AND DISPOSAL
Warning
To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions, including the following:
•Unplug the washer before cleaning to avoid the risk of electric shock.
•Never use harsh chemicals, abrasive cleaners, or solvents to clean the washer. They will damage the finish.
•Do not put oily or greasy rags or clothing on top of the washer. These substances give off vapors that could ignite the materials.
•Do not wash items that are soiled with vegetable or cooking oil. These items may contain some oil after laundering.
Due to the remaining oil, the fabric may smoke or catch fire by itself.
•Disconnect this appliance from the power supply before attempting any user maintenance.
Turning the controls to the OFF position does not disconnect this appliance from the power supply.
Failure to follow this warning can cause serious injury, fire, electric shock, or death.
•Do not combine laundry products for use in 1 load unless specified on the label. Do not mix chlorine bleach with ammonia or acids such as vinegar.
Follow package directions when using laundry products. Incorrect usage can produce poisonous gasresulting in serious injury or death.
•Do not reach into the washer while parts are moving. Before loading, unloading, or adding items, push the START/PAUSE button and allow the drum to coast to a complete stop before reaching inside.
Failure to follow this warning can cause serious injury, fire, electric shock, or death.
•This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use
of the appliance by a person responsible for their safety.
•Children should be supervised to ensure that they do not play with the appliance.
•Do not allow children to play on or in the
washer.
Close supervision of children is necessary when the washer is used near children. As children grow, teach them the proper, safe use of all appliances.
Failure to comply with these warnings could result in serious personal injuries.
•Destroy the carton, plastic bag, and other packing materials after the washer is unpacked.
Children might use them for play.
Cartons covered with rugs, bedspreads or plastic sheets can become airtight chambers. Failure to comply with these warnings could result in serious personal injuries.
•Keep laundry products out of children's reach.
To prevent injury to persons, observe all warnings on product labels. Failure to comply with these warnings could result in serious personal injuries.
8 IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
Warning
For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death.
SAFETY INSTRUCTIONS FOR USE, CARE, CLEANING, AND DISPOSAL
Warning
To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions, including the following:
•Remove the door to the washing compartment to avoid the danger of children or small animals getting trapped inside before your washer is removed from service or discarded. Failure to do so can result injury or death.
•Before the washer is removed from service or discarded, remove the washer door to prevent accidental entrapment.
Failure to comply with these warnings could result in serious personal injuries.
•Unplug the washer before replacing external fuse. Failure to follow this warning can cause serious injury, fire, electric shock or death.
•If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
•The new hose-sets supplied with the appliance are to be used and that old hose-sets should not be reused.
TABLE OF CONTENTS 9
TABLE OF CONTENTS
2 |
PRODUCT FEATURES |
40 |
- 11-4. Vend type setup - card type or coin |
||
|
|
|
|
type setup |
|
3 |
|
41 |
|||
IMPORTANT SAFETY INSTRUCTIONS |
- 11-5. Pre-wash setup |
||||
5 |
BASIC SAFETY PRECAUTIONS |
42 |
- 11-6. Twin spray setup |
||
43 |
- 12. How to enter the |
||||
5 |
GROUNDING INSTRUCTIONS |
||||
44 |
- 12-1. Pause function setup |
||||
6 |
SAFETY INSTRUCTIONS FOR INSTALLATION |
||||
45 |
- 13. How to enter the special price day |
||||
7 |
SAFETY INSTRUCTIONS FOR USE, |
||||
46 |
- 13-1. How to change to Sunday |
||||
|
CARE, CLEANING, AND DISPOSAL |
||||
|
47 |
- 14. Special price beginning time setup |
|||
10 |
|
||||
Parts And Accessories |
48 |
- 15. Special price ending time setup |
|||
10 |
Parts |
49 |
- 16. Prewash time setup |
||
50 |
- 17. Washing time setup |
||||
10 |
Accessories |
||||
51 |
- 18. Rinsing time per cycle |
||||
11 |
|
||||
Control panel features |
52 |
- 19. Rinsing time setup |
|||
|
|
53 |
- 20. Top spin speed – final spin time |
||
11 |
Coin type |
||||
|
|
depends on RPM |
|||
11 |
Card type / OPL type |
54 |
- 21. Value of coin 1 |
||
13 |
INSTALLATION INSTRUCTIONS |
55 |
- 22. Value of coin 2 |
||
56 |
- 23. Penny increment pricing offset |
||||
13 |
Checking and choosing the proper location |
57 |
- 24. How to change the water level |
||
14 |
Unpacking and removing shipping bolts |
58 |
- 25. Beep volume |
||
14 |
Installing Hole cap |
59 |
- 26. Time to keep the coin (Use only for |
||
15 |
Connecting the water lines |
60 |
coin type) |
||
16 |
Connecting the drain line |
- 27. How to set drop count |
|||
16 |
Connecting the auto dosing |
61 |
- 28. How to set shut down time after UE |
||
17 |
Leveling the washing machine |
62 |
- 29. How to set rinse spin enable |
||
18 |
PREPARATION |
63 |
- 30. How to set drop count for rinse spin |
||
64 |
- 31. How to set auto dosing |
||||
18 |
Precautions for fabric care before wash cycle |
65 |
- 32. How to enter the |
||
19 |
Fabric care labels |
66 |
- 33. How to set custom program |
||
19 |
Sorting laundry |
67 |
PROGRAMMING MODE – TEST MODE |
||
20 |
Recommended detergent |
67 |
- 1. |
||
20 |
About the dispenser |
68 |
- 2. Factory reset - |
||
21 |
Loading the dispenser |
69 |
- 3. Time setup |
||
22 |
OPERATING YOUR Washer |
70 |
- 4. Courtesy cycle |
||
71 |
- 5. Cycle Kill |
||||
|
|
||||
23 |
PROGRAMMING MODE |
72 |
- 6. Password - |
||
73 |
- 7. Tub clean - |
||||
24 |
|
||||
Structure of Programming mode |
74 |
PROGRAMMING MODE – COLLECT MODE |
|||
25 |
– Card/Coin type |
75 |
Collect Mode Data lists |
||
Structure of Programming mode – OPL type |
|
76 |
MAINTENANCE |
||
26 |
PROGRAMMING MODE –SETUP MODE |
|
|||
76 |
- Care after wash |
||||
26 |
- 1. How to change regular price. |
||||
27 |
- 2. How to change regular delicates price. |
76 |
- Storing the Washer |
||
28 |
- 3. How to change regular warm & cold |
76 |
- Cleaning the Dispenser |
||
|
price |
77 |
- Cleaning the water inlet filters |
||
29 |
- 4. How to change regular hot price |
78 |
- Cleaning the drain pump filter |
||
30 |
- 5. How to change special price |
79 |
- Cleaning the door seal |
||
31 |
- 6. How to change special delicates price |
79 |
- Clean the drum, TUB CLEAN |
||
32 |
- 7. How to change special warm & cold price |
81 |
ERROR MODE |
||
33 |
- 8. How to change special hot price |
||||
|
|
|
|||
34 |
- 9. How to change add super wash price |
82 |
Power Fail Recovery |
||
35 |
- 10. How to change add super wash type |
||||
|
|
|
|||
36 |
- 11. How to enter the |
82 |
Default washer Settings |
||
37 |
- 11-1. Special price day setup |
|
|
|
|
|
|
|
|||
38 |
- 11-2. Non-stop rinse setup |
83 |
SPECIFICATIONS |
||
39 |
- 11-3. Add Super Wash setup |
|
|
|
|
|
|
|
10 Parts And Accessories
Parts And Accessories
Parts
Detergent dispenser (for single
model)
Door Magnet Door
Plunger (see page 2)
Detergent
dispenser drawer (for stack model)
|
Water |
Control |
inlets |
panel |
|
Door seal |
Shipping |
|
bolts |
Tub |
|
Leveling feet
Drain pump filter cover Drain pump filter Drain hose
Power cord
Drain hose
Accessories
(-)
(+)
Hot and Cold |
Non-skid pads |
Caps (4) |
Harness |
||
Water Hoses |
|
(for covering |
(for connecting |
||
|
|
shipping bolt holes) |
auto dosing) |
||
|
|
|
|
|
|
Wrench |
Hole cap (4) |
Tie Strap |
Elbow Bracket |
OPL sheet |
(for removing |
(for securing |
(for securing drain hose) |
(for securing |
(only for OPL type) |
shipping bolts and |
auto dosing |
|
drain hose) |
|
adjusting leveling feet) |
hole) |
|
|
|
Control panel features 11
Control panel features
Coin type - Side by side (F1069FD4F)
5 |
1 |
2 |
|
|
|
4 |
3 |
Coin type - Stack (F1069FDF)
5 |
1 |
2 |
|
|
|
4 |
3 |
Card / OPL Type (F1069FD6F, F1069FD7F)
5 |
1 |
2 |
4 |
3 |
1. |
Display LED |
4. |
Start/Pause button |
2. |
Cycle button |
5. |
Status LED |
3. |
Optional function button |
|
|
12 Control panel features
Status LED |
Display LED |
Cycle button |
Display LED
The display shows the vend price and remaining time and programming options. Error
codes are also displayed here.
Cycle button
Press the CYCLE button to select the desired cycle based on laundry types and conditions.
Hot
Use for hot washing for heavy fabrics, such as white clothes, table linens, and heavily soiled clothes.
Warm
Use for warm washing for heavy fabrics, such as jeans, corduroys, or work clothes.
Cold
Use for cold washing for sturdy fabrics, such as casual work.
Delicates
Use for cold washing for synthetic fabrics, such as washable knit fabric and no-iron finishes.
Start/Pause button Optional function button
Optional function button
Add Super Wash: Wash time or rinse cycle can be added when additional coin is inserted or a valid cash card is entered.
Custom PGM: Customized cycle program can be used. Only available in OPL type.
Start/Pause button
The Start/Pause LED flashes when the full vend price has been satisfied and the cycle has been chosen.
Status LED
LED |
Description |
LED flashes whenever the
Washing cycle is in operation.
LED flashes whenever the
Rinsing cycle is in operation.
LED flashes whenever the
Spinning cycle is in operation.
LED flashes whenever the door lock is activated.
INSTALLATION INSTRUCTIONS 13
INSTALLATION INSTRUCTIONS
Checking and choosing the proper location
Install the washing machine on a solid floor that is strong and rigid enough to support the weight of the washing machine, even when fully loaded, without flexing or bouncing. If the floor has too much flex, you may need to reinforce it to make it more rigid. If the floor is not solid, it may cause severe vibration and noise.
1Clean the floor before installation.
-Make sure to select solid and smooth ground.
2Two or more people are needed for moving and unpacking the washing machine.
3Allow for sufficient space between the walls and the washing machine for installation.
Space requirements
You must allow sufficient space for water lines, the drain line, and airflow.
NOTE
•Be sure to allow for wall, door, or floor moldings that may increase the required clearances.
Installing on a floor
221/4” |
(570mm) |
|
|
|
|
303/16” |
|
|
|
|
|
|
|
4” |
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
(767mm) |
|
|
(100mm) |
||||||
|
|
|
|
525/8” |
|
|
|
|
|
|
|
|
|
|
|
(1337mm) |
|
|
|
|
|
3811/16” |
|
|
(983mm) |
|
|
1” |
27” |
1” |
(25mm) |
(686mm) |
(25mm) |
NOTE
•The floor must be strong and rigid enough to support the weight of the washer, when fully loaded, without flexing or bouncing. If your floor has too much flex, you may need to reinforce it to make it more rigid.
A floor that is adequate for a top-loading washer may not be rigid enough for a front loading washer, due to the difference in the spin speed and direction. If the floor is not solid, your washer may vibrate and you may hear and feel the vibration throughout your house.
•Before installing the washer, make sure the floor is clean, dry and free of dust, dirt, water and oils so the washer feet can not slide easily. Leveling feet that can move or slide on the floor can contribute to excess vibration and noise due to poor contact with the floor.
14 INSTALLATION INSTRUCTIONS
Unpacking and removing shipping bolts
When removing the washer from the carton base, be sure to remove the foam drum support in the middle of the carton base.
If you must lay the washer down to remove the base packaging materials, always lay it carefully on its side.
DO NOT lay the washer on its front or back.
Carton Base Foam Tub Support
1Remove the bottom two shipping bolts with the wrench (included) to fully loosen all four shipping bolts by turning them counterclockwise and then pulling them out.
Retainer |
Shipping |
bolt |
NOTE
•Save the bolt assemblies for future use. To prevent damage to internal components, DO NOT transport the washer without reinstalling the shipping bolts.
•Failure to remove shipping bolts and retainers may cause severe vibration and noise, which can lead to permanent damage to the washer. The cord is secured to the back of the washer with a shipping bolt to help prevent operation with shipping bolts in place.
Installing Hole cap
1 Take the hole cap out from manual bag.
Hole cap
2Locate the four hole caps included in the accessory pack and install them in the shipping bolt holes.
Cap
2Insert the hole cap (4 pieces) into hose connect in back of the machine.
NOTE
•In case of using auto dosing feature, inserting hole cap is unnecessary.
INSTALLATION INSTRUCTIONS 15
Connecting the water lines
1Check the rubber seals on both sides of the hose.
-Insert a rubber seal into the threaded fittings on each hose to prevent leaking.
Rubber seal |
Rubber seal |
Water hose (To faucet)
Water hose
(To water inlet on the washing machine)
2Connect the water supply hoses to the HOT and COLD water faucets tightly by hand and then tighten another 2/3 turn with pliers.
-Connect the blue hose to a cold water faucet and the red hose to a hot water faucet.
WARNING
•Do not overtighten. Damage to the coupling can result.
3After connecting inlet hose to water faucets, turn on the water faucets to flush out foreign substances (dirt, sand or sawdust) in the water lines. Let water drain into a bucket, and check the water temperature.
4Connect the hoses to the water inlets tightly by hand and then tighten another 2/3 turn with pliers.
-Connect the blue hose to the cold water inlet and the red hose to the hot water inlet.
Cold water |
Hot water |
|
inlet |
||
inlet |
||
|
WARNING
•Do not overtighten the hoses.
Overtightening can damage the valves resulting in leaking and property damage.
5Check for leaks by turning on the faucets.
-If water leaks, check steps 1 to 4 again.
NOTE
•For your safety, and for extended product life, use only authorized components. The manufacturer is not responsible for product malfunction or accidents caused by the use of separately purchased unauthorized parts.
•Use new hoses when you install the washing machine. Do not reuse old hoses. Use only the inlet hoses provided with the washer. LG does not recommend the use of aftermarket hoses.
•Periodically check the hoses for cracks, leaks and wear, and replace the hoses every 5 years.
•Do not stretch the water hoses intentionally, and make sure that they are not crushed by other objects.
•Water supply pressure must be between
1,0 kgf/cm² and 8,0 kgf/cm² (0,1~0,8 MPa). If the water supply pressure is more than 8,0 kgf/cm², a pressure reducing valve must be installed.
•To provide optimum washing performance the hot water temperature should be set at 120-135°F (48-57°C) and the cold at 60°F (15°C).
16 INSTALLATION INSTRUCTIONS
Connecting the drain line
Secure the drain hose in place to prevent moving and leaking.
NOTE
•The drain hose should be properly secured.
Failure to properly secure the drain hose can result in flooding and malfunction.
•Total height of the hose end should not exceed 39,4 inches (100,0 cm) from the bottom of the washer.
•The drain must be installed in accordance with any applicable local codes and regulations.
•Make sure that the water lines are not stretched, pinched, crushed, or kinked.
Using a standpipe
1Clip the end of the hose into the elbow bracket.
-Connect the elbow bracket within 4 inches (10 cm) from the end of the drain hose.
If the drain hose is extended more than 4 inches (10 cm) beyond the end of the elbow bracket, mold or microorganisms could spread to the inside of the washer.
No more than 4 inches (10 cm)
Elbow Bracket
2Insert the end of the drain hose into the standpipe.
Elbow Bracket
Drain Hose
Using a laundry tub
1Clip the end of the hose into the elbow bracket.
-Connect the elbow bracket within 4 inches (10 cm) from the end of the drain hose.
If the drain hose is extended more than 4 inches (10 cm) beyond the end of the elbow bracket, mold, or microorganisms could spread to the inside of the washer.
No more than 4 inches (10 cm)
Elbow Bracket
2 Hang the end of the drain hose over the side of the laundry tub.
Laundry Tub
max. 39.4” |
max. 39.4” |
(1.0 m) |
|
|
(1.0 m) |
Drain Hose
Tie Strap
3Use a tie strap to secure the drain hose in place.
Connecting the auto dosing
1Unscrew the 2 screws on the protective cover and remove the cover.
2Connect the auto dosing harness from Accessory parts.
NOTE
3Use a tie strap to secure the drain hose in place.
•The voltage of the auto dosing machine should be the same as the washer's voltage.
|
|
|
|
|
|
INSTALLATION INSTRUCTIONS 17 |
||
|
|
|
|
|
|
|
|
|
Leveling the washing machine |
4 Check the washing machine’s level again. |
|||||||
|
|
|
|
|
|
- Push or rock the top edges of the washing |
||
The washer tub of your new washing machine |
|
machine gently to make sure that the |
||||||
spins at very high speeds. To minimize vibration, |
|
washing machine does not rock. |
||||||
noise, and unwanted movement, the floor must |
|
- If the washing machine rocks, repeat steps |
||||||
be perfectly level and solid. |
|
1 to 3. |
||||||
1 Check the washing machine’s level. |
|
WARNING |
||||||
- Check the precise level by rocking the top |
• Using the washing machine without level- |
|||||||
edges of the washing machine or placing |
||||||||
a level on the washing machine. The slope |
|
ing, it may result in malfunction caused |
||||||
beneath the washing machine must not |
|
by the production of excess vibration and |
||||||
exceed 1°, and all four leveling feet must |
|
noise. |
||||||
rest firmly on the floor. |
• Use the leveling feet only when you level |
|||||||
|
|
|
|
|
|
the washing machine. If you raise the level- |
||
|
|
|
|
|
|
ing feet unnecessarily, it may cause abnor- |
||
|
|
|
|
|
|
mal vibration of the washing machine. |
||
|
|
|
|
|
|
|||
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Using non-skid pads (optional) |
|
|
|
|
|
|
|
|
|
|
|
1°
2Turn the lower leveling feet clockwise to level the washing machine.
-Turning the lower leveling feet clockwise raises the washing machine.
Raise
3Turn the locknuts counterclockwise and tighten them when the washing machine is level.
Tighten all 4 lock nuts securely using
the wrench.
If you install the washing machine on a slippery surface, it may move because of excessive vibration. Incorrect leveling may cause malfunction through noise and vibration. In the event of this, lay the non-skid pads under the leveling feet and adjust the level.
1Clean the floor to attach the non-skid pads.
-Use a dry rag to remove and clean foreign objects or moisture. If moisture remains, the non-skid pads may slip.
2Adjust the level after placing the washing machine in the installation area.
3Place the adhesive side of the non-skid pad on the floor.
-It is most effective to install the non-skid pads under the front legs. If it is hard to place the pads under the front legs, place them under the back legs.
This side up
Adhesive
side
Remove
backing
4Check the washing machine’s level again.
-Push or rock the top edges of the washing machine gently to make sure that the washing machine does not rock. If the washing machine rocks, level the washing machine again.
18 PREPARATION
PREPARATION
Precautions for fabric care before wash cycle
Read and observe the following to prevent shrinkage or damage to clothes.
υu Check all pockets to make sure that they are empty.
-Items such as clips, matches, pens, coins, and keys can damage both your washer and your clothes.
υu Close zippers, hooks, and drawstrings to prevent these items from snagging or tangling on other clothes.
υu Pretreat heavily stained areas before washing.
-Doing so will produce clean, stain-free results.
υu Combine large and small items in a load. Load large items first.
υu Large items should not be more than half of the total washload.
υu The washer can be fully loaded, but the drum should not be tightly packed with items.
- The door of the washer should close easily.
υu Do not wash single items, except for bulky items such as blankets. Make sure to wash laundry in similar types of loads.
-Washing a single small item may result in the tub becoming unbalanced, vibrating, making a noise.
υu Do not wash waterproof clothes.
-This may cause abnormal vibration or may cause the load to bounce, which could damage the tub.
υu Check if there are any other foreign objects in the door seal and take extra care that clothes do not get caught there.
-Foreign objects in the door seal may stain clothes, and water may leak if clothes get caught in the door seal.
υu Wash underwear or small, light items in a laundry net.
-Small, light items may get caught in the door seal, and a brassiere hook may damage other items or the tub.
υu Brush heavy soil, dust, or hair off fabrics before washing.
-Laundry may not wash clean if there is dirt or sand on the fabrics, or they may be damaged due to particles rubbing against sheer fabrics.
υu Wash blankets individually.
-Washing more than one blanket together may produce unclean results due to tangling or an unbalanced load.
υu Always separate fabrics according to their colors and wash them separately to prevent colors from running.
-Fabrics may damage or become stained due to fabric dyes running or due to foreign objects transferring from one fabric to another.
PREPARATION 19
Fabric care labels
Most articles of clothing feature fabric care labels that include instructions for proper care.
Category |
Label |
Directions |
|
|
Hand Wash |
|
|
Machine Wash, |
|
|
Normal Cycle |
|
|
Use Permanent Press/ |
|
|
Wrinkle Resistant |
|
|
washing machine |
|
|
setting (which has a |
|
|
cool down or |
|
|
cold spray before the |
|
|
reduced spin) |
Washing |
|
Use Gentle/Delicate |
|
washing machine |
|
|
|
|
|
|
setting (slow agitation |
|
|
and/ or reduced wash |
|
|
time). |
|
|
Do Not Wash |
|
|
Do Not Wring |
|
|
Hot |
Water |
|
Warm |
Temperature |
|
|
|
|
|
|
|
Cold/Cool |
|
|
Any Bleach (When |
|
|
Needed) |
|
|
Only Non-Chlorine |
Bleach |
|
Bleach |
|
(When Needed) |
|
symbols |
|
|
|
|
Do Not Bleach |
Sorting laundry
It is recommended that you sort laundry into similar loads that are washable in the same cycle.
Refer to the following chart for sorting clothes
Colors |
Whites / Lights / Darks |
|
|
|
|
Soil |
Heavy / Normal / Light |
|
|
|
|
Fabric |
Delicates / Easy Care / Sturdy |
|
Cottons |
||
|
||
|
|
|
Lint |
Lint Producers / Lint Collectors |
|
|
|
20 PREPARATION
Recommended detergent
Use HE (High-Efficiency) detergent for frontloading washing machines. HE detergents dissolve more efficiently and produce
fewer suds to ensure efficient washing and rinsing. Use the correct amount of detergent as indicated on the label of the detergent packaging.
NOTE
•Use HE detergents, since using a regular detergent will produce excessive suds.
•HE detergents produce fewer suds, dissolve more efficiently to improve washing and rinsing performance, and help to keep the interior of your washer clean.
•Use less detergent for soft water.
•Wipe up any spills immediately, as liquids could damage the finish and the control panel of the washing machine.
•Using too much detergent can cause a build-up in the tub resulting in
unsatisfactory performance and machine malfunction.
•If you use a detergent that does not dissolve easily or a detergent with high viscosity, it will leave a residue on the tub, which may not rinse properly.
About the dispenser
The automatic dispenser consists of three compartments which hold:
•Liquid chlorine bleach.
•Liquid fabric softener.
•Liquid and powdered detergent and colorsafe bleach for main wash.
All laundry products can be added at once in their respective dispenser compartments.
They will be dispensed at the appropriate time for the most effective cleaning.
After adding the laundry products to the dispenser, close the dispenser cover.
To add detergent, bleach, and fabric softener to the automatic dispenser:
1.Open the dispenser cover.
2.Load the laundry products into the appropriate compartments.
3.Slowly close the dispenser cover to avoid early dispensing of the laundry products.
NOTE
•It is normal for a small amount of water to remain in the dispenser compartments at the end of the cycle.
PREPARATION 21
Loading the dispenser
Main Wash Detergent Compartment
This compartment holds laundry detergent for the main wash cycle, which is added to the load at the beginning of the cycle. Use HE (High-Efficiency) detergent with your washing machine.
Follow the detergent manufacturer's instructions with respect to the amount of detergent to use, and never use more than the recommended amount. Using too much detergent can result in detergent buildup in clothing and the washer. Either powdered or liquid detergent may be used.
NOTE
•Liquid or powdered color-safe bleach may be added to the main wash compartment with detergent of the same type.
-Single model -
|
Main Wash |
|
Detergent |
|
Compartment |
Liquid Chlorine |
Liquid Fabric |
Bleach Compartment |
Softener Compartment |
- Stack model -
Main Wash Detergent
Compartment
Liquid Bleach Compartment
This compartment holds liquid chlorine bleach, which will be dispensed automatically at the proper time during the wash cycle.
NOTE
•Do not add powdered or liquid color-safe bleach to this compartment.
•Always follow the manufacturer’s recommendations when adding bleach. Do not exceed the maximum fill line. Using too much bleach can damage fabrics.
•Never pour undiluted liquid chlorine bleach directly onto the load or into the drum. Fabric damage can occur.
Fabric Softener Compartment
This compartment holds liquid fabric softener, which will be automatically dispensed during
rinse cycle.
NOTE
•Always follow the manufacturer’s recommendations when adding fabric softener. Do not exceed the maximum fill line. Using too much fabric softener may result in stained clothes.
•Dilute concentrated fabric softeners with warm water. Do not exceed the maximum fill line.
•Never pour fabric softener directly onto the load or into the drum.
•Do not add the fabric softener sheets to this compartment.
•Do not add ‘fabric sheet softener’ into the dispenser draw as it is likely to cause water to leak out. If ‘fabric sheet softener’ has been added, please pull out the dispenser draw and remove.
Liquid Chlorine |
Liquid Fabric |
Bleach Compartment |
Softener Compartment |
22 OPERATING YOUR Washer
OPERATING YOUR Washer
1.Ready mode
1)Coin / Card type
–The cycle LEDs are lit at the same time, when the prices of cycles are equal.
2)OPL type
–The cycle LEDs flash at the same time, and displays PUSH.
NOTE
•Price setting varies by country
•Set your country from mode (Refer How to enter the )
•After EEPT, reset your country (Default country is EUK)
2. Insert card/coin (not for OPL type)
Insert a cash card that has a sufficient balance. The card balance should be more than the programmed vend price for a selected cycle.
NOTE
•When the card balance is not enough, machine displays the card balance for 5
seconds and then displays message repetitively
•Insert a sufficient amount of change that is more than the programmed vend price for the selected cycle.
NOTE
•The machine will not start until sufficient coins are inserted.
3. Select the cycle
Press the desired button and press the Start button. The display LED will show the remaining time and the selected cycle starts.
•Select cycles designed for different types of fabric and soil levels.
CYCLE |
Fabric type |
Wash/Rinse |
|
Temp. |
|||
|
|
||
|
|
|
|
Hot |
Cotton, linen, towels, |
Hot / Cold |
|
shirts, sheets |
|||
|
|
||
|
|
|
|
Warm |
Cotton, mixed loads, |
|
|
work clothes, jeans, |
Warm / Cold |
||
|
shirts |
|
|
|
|
|
|
|
Cotton, dress shirts, |
|
|
Cold |
pants, wrinkle-free |
|
|
clothing, cotton/ |
Cold / Cold |
||
|
poly blend clothing, |
|
|
|
tablecloths |
|
|
Delicates |
Dress shirts, blouses, |
|
|
nylons, sheer or lacey |
Cold / Cold |
||
|
garments |
|
4. Add Super Wash
Wash time or rinse cycle can be added when additional coin is inserted or a valid cash card is entered.
5. Custom PGM
Customized cycle program can be used. Only available in OPL type.
6. Change course
You cannot change the cycle while the machine is running.
7. Cycle finish
The machine stops and LED display shows with beeper sound.
Do not work any button and stop the washer (When the washer is operating) or (when a cycle is in progress)
WARNING
•To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS before operating this appliance.
PROGRAMMING MODE 23
PROGRAMMING MODE
:You can check machine information or change setting on Program setup, collect information data, Diagnostic test.
There are two methods that you can enter programming mode.
How to enter Programming mode |
How to use button |
||||
You can enter programming mode only for Idle |
You can change Washer vend price, cycle time |
||||
state and pause state. |
|
and Cycle parameters, etc. |
|||
- Card Type |
|
Press Button |
Description |
||
1) |
Insert service card. |
|
|
Moves to upper level or |
|
2) |
Display will show |
. |
Hot |
||
|
|
|
Comes back to Idle State |
||
- Coin Type |
|
|
|||
|
|
Moves through modes in the |
|||
1) |
Dissemble upper coin box key. |
Warm |
|||
2) |
Take out the coin drop from the coin box. |
|
same level (+) |
||
3) |
Turn on/off the toggle switch at the back of |
Cold |
Moves through modes in the |
||
|
the coin box. |
|
|||
|
|
same level (-) |
|||
4) |
Display will show |
. |
|
||
Start |
Enters the selected mode |
||||
- All Types |
|
||||
|
|
|
1)Push the Hot & Cold button at the same time.
2)Push the Warm button 3 times.
3)Push the Start button.
4)Display will show .
Coin Box Key |
|
||
Coin Vault |
|
Insert Debit Card |
|
Openings close |
|
||
|
|
||
|
|
|
|
|
|
|
|
- coin type - |
- card type - |
- OPL type - |
NOTE
• If you turn on the power without connecting meter case for the first time, the machine display
.
• When the machine is shipped from the factory, it is set in the coin type. You can change Card/ Coin type by button. (For more information refer to SETUP mode.)
• The machine will displayPUSH for OPL type
•Price setting varies by country
•Set your country frommode (Refer How to enter the )
•After EEPT, reset your country (Default country is EUK)
24 PROGRAMMING MODE
Structure of Programming mode – Card / Coin type
Algorithm flow chart shows how to control the programming mode.
Before program set, check the structure of the programming mode.
1.Turn on/off toggle switch or insert service card, for entering setup mode (or follow OPL type instructions).
2.Press Hot button to move to the upper level.
3.Press Warm (+) or Cold (-) button if you want to be at the same level.
4.Press Start button to enter the details of Setup or Diagnostic Tests.
is to set price value, time value, vend type, etc.
consists of line test, reset, free cycle, and kill cycle. is to collect the usage data.
NOTE
•Do not use , .
•It is used only in inspecting the machine.
•Price setting varies by country
•Set your country from mode (Refer How to enter the )
•After EEPT, reset your country (Default country is EUK)
PROGRAMMING MODE 25
Structure of Programming mode – OPL type
Algorithm flow chart shows how to control the programming mode.
Before program set, check the structure of the programming mode.
The method of entering setup mode.
1)Push the Hot & Cold button at the same time.
2)Push the Warm button 3 times.
3)Push the Start button.
4)Display will show .
is to set price value, time value, vend type, etc.
consists of line test, reset, free cycle, and kill cycle. is to collect the usage data.
NOTE
•Do not use , .
•It is used only in inspecting the machine.