LG BP440N User guide

OWNER’S MANUAL

Network 3D

Blu-ray Disc™ /

DVD Player

Please read this manual carefully before operating your set and retain it for future reference.

BP440 / BP440N

www.lg.com

P/NO : MFL68142801_1.0

1 GettingStarted

2 Getting Started

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning flash with arrowhead symbol within an equilateral triangle

is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s

enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING: Do not install this equipment in a confined space such as a book case or similar unit.

CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings shall be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer’s instruction has been adhered to.

Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon a dedicated circuit;

That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and

the point where the cord exits the appliance. To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible.

		Getting Started 3
	This device is equipped with a portable battery or	Disposal of waste batteries/accumulators
	accumulator.	1. When this crossed-out wheeled
	Safety way to remove the battery or the
		bin symbol is attached to batteries/
	battery from the equipment: Remove the	accumulators of Your product it means
	old battery or battery pack, follow the steps	they are covered by European Directive
	in reverse order than the assembly. To prevent	2006/66/EC.
	contamination of the environment and bring on	2. This symbol may be combined with
	possible threat to human and animal health, the
		chemical symbols for mercury(Hg),
	old battery or the battery put it in the appropriate
		cadmium(Cd) or lead(Pb) if the
	container at designated collection points. Do
		battery Contains more that 0.0005%
	not dispose of batteries or battery together with
		of mercury, 0.002% of cadmium or
	other waste. It is recommended that you use
		0.004% of lead.
	local, free reimbursement systems batteries and
		3. All batteries/accumulators should be
	accumulators. The battery shall not be exposed to
		disposed separately from the municipal
	excessive heat such as sunshine, fire or the like.
		waste stream via designated collection
	CAUTION: The apparatus shall not be exposed to
		facilities appointed by the government
	water (dripping or splashing) and no objects filled
		or the local authorities.
	with liquids, such as vases, shall be placed on the
		4. The correct disposal of Your old
	apparatus.
		batteries/ accumulators will help
	Disposal of your old appliance
		to prevent potential negative
	1. When this crossed-out wheeled bin	consequences for the environment,
	symbol is attached to a product it	animal and human health.
	means the product is covered by the	5. For more detailed information
	European Directive 2002/96/EC.
		about disposal of Your old batteries/
	2. All electrical and electronic products	accumulators, please contact Your
	shall be disposed of separately	city offi ce, waste disposal service or
	from the municipal waste stream	the shop where You purchased the
	via designated collection facilities	product.
	appointed by the government or the
	local authorities.

3.The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.

4.For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.

1 GettingStarted

1 GettingStarted

4 Getting Started

	LG Electronics hereby declares	Notes on Copyrights
	that this/these product(s) is/are	yy Because AACS (Advanced Access Content
	in compliance with the essential
		System) is approved as content protection
	requirements and other relevant provisions of
		system for Blu-ray Disc format, similar to use of
	Directive 2004/108/EC, 2006/95/EC, 2009/125/EC
		CSS (Content Scramble System) for DVD format,
	and 2011/65/EU.
		certain restrictions are imposed on playback,
	Contact office for compliance of this product:
		analog signal output, etc., of AACS protected
	LG Electronics Inc.	contents. The operation of this product and
	EU Representative, Krijgsman 1,	restrictions on this product may vary depending
	1186 DM Amstelveen, The Netherlands	on your time of purchase as those restrictions
	yy Please note that this is NOT a Customer Service	may be adopted and/or changed by AACS after
	contact point. For Customer Service Information,	the production of this product.
	see Warranty Card or contact the dealer that you	yy Furthermore, BD-ROM Mark and BD+ are
	purchased this product.	additionally used as content protection systems
		for Blu-ray Disc format, which imposes certain
		restrictions including playback restrictions for
		BD-ROM Mark and/or BD+ protected contents.
		To obtain additional information on AACS, BD-
		ROM Mark, BD+, or this product, please contact
		an authorized Customer Service Center.
		yy Many BD-ROM/DVD discs are encoded with
		copy protection. Because of this, you should only
		connect your player directly to your TV, not to a
		VCR. Connecting to a VCR results in a distorted
		picture from copy-protected discs.
		yy This product incorporates copyright protection
		technology that is protected by U.S. patents
		and other intellectual property rights. Use of
		this copyright protection technology must be
		authorized by Rovi Corporation, and is intended
		for home and other limited viewing uses only
		unless otherwise authorized by Rovi Corporation.
		Reverse engineering or disassembly is prohibited.
		yy Under the U.S. Copyright laws and Copyright
		laws of other countries, unauthorized recording,
		use, display, distribution, or revision of television
		programs, videotapes, BD-ROM discs, DVDs, CDs
		and other materials may subject you to civil and/
		or criminal liability.

Getting Started	5

Important Notice for TV color system

The color system of this player differs according to currently playing discs.

For example, when the player plays the disc recorded in the NTSC color system, the image is output as an NTSC signal.

Only the multi system color TV can receive all signals output from the player.

yy If you have a PAL color system TV, you will see just distorted images when using discs or video contents recorded in NTSC.

yy The multi system color TV changes the color system automatically according to input signals. In case that the color system is not changed automatically, turn it off and then on to see normal images on screen.

yy Even if the disc recorded in NTSC color system are well displayed on your TV, these may not be recorded correctly on your recorder.

>>Caution

yy Watching a 3D content for a long period time may cause dizziness or tiredness.

yy It is not recommended to watch a movie in 3D mode for infirm, child and pregnant woman.

yy If you are experiencing headache, tiredness or dizziness while viewing contents in 3D, it is strongly recommended to stop the playback and rest until you feel normal.

1 GettingStarted

6 Table of Contents

	Table of Contents			4	Operating
			28		Home Menu Display
			28		–  Using [HOME] menu
	1	Getting Started	28		–  Using the SmartShare
			29		Playing the Linked Devices
	2	Safety Information	29		–  Playing a Disc
			29		–  Playing Blu-ray 3D disc
	8	Introduction
			30		–  Playing a file on disc/USB device
	8	–  Playable Discs and symbols used in
			31		–  Playing a file on Android device
		this manual
			32		–  Playing a file on a network server
	9	–  About the “7” Symbol Display
			33		Using Home Network Server for PC
	9	–  Regional Code
			33		–  About SmartShare PC Software
	9	–  System Select
					(DLNA)
	10	Remote Control
			33		–  Downloading SmartShare PC
	11	Front Panel
					Software (DLNA)
	11	Rear Panel
			33		–  Installing SmartShare PC Software
	2	Connecting			(DLNA)
			34		–  Sharing files and folders
			34		–  System requirements
	12 Connecting to Your TV
			35		General Playback
	13	–  What is SIMPLINK?
			35		–  Basic operations for video and audio
	13	–  Resolution Setting
					content
	14 Connecting to an Amplifier
			35		–  Basic operations for photo content
	15	–  Connecting to an Amplifier via HDMI
			35		–  Using the disc menu
		Output
			36		–  Resume playback
	15	–  Connecting to an Amplifier via Digital
			36		–  Last Scene Memory
		Audio Output
			37		On-Screen Display
	16 Connecting to your Home Network
			37		–  To control video playback
	16	–  Wired network connection
			38		–  To control photo view
	16	–  Wired Network Setup
			39		Advanced Playback
	3	System Setting	39		–  Repeat playback
			39		–  Repeating a specific portion
			39		–  Playing from selected time
	19	Initial Setup
			40		–  Selecting a subtitle language
	20	Settings
			40		–  Hearing a different audio
	20 –  Adjust the Setup Settings
			40		–  Watching from a different angle
	20	–  [NETWORK] Menu
			40		–  Changing the TV Aspect Ratio
	21	–  [DISPLAY] Menu
			41		–  Changing subtitle Code Page
	23	–  [LANGUAGE] Menu
			41		–  Changing the Picture Mode
	23	–  [AUDIO] Menu
			42		–  Viewing content information
	25	–  [LOCK] Menu
			42		–  Changing content list view
	26	–  [OTHERS] Menu
			42		–  Selecting a subtitle file
			43		–  Listening to music during slide show
			43		–  Playing file encoded in 3D
			44		Advanced Features
			44		–  Enjoying BD-Live™

					Table of Contents 7
	44	–  LG AV Remote	6		Appendix
	44	–  Private Sound Mode
			51		Controlling a TV with the Supplied
	45	Using the Premium
					Remote Control
	45	Using the LG Smart World
			51		–  Setting up the remote to control your
	46	–  Signing in
					TV
	46	–  Searching online content
			52		Network Software Update
	47 Using the My Apps Menu
			52		–  Network update notification
	5	Troubleshooting	52		–  Software update
			54		Additional Information
	48	Troubleshooting	54		–  File requirement
			55		–  AVCHD (Advanced Video Codec High
	48	–  General
					Definition)
	49	–  Network
			56		–  About DLNA
	50	–  Picture
			56		–  Certain system requirements
	50	–  Customer support
			56		–  Compatibility notes
	50 –  Open source software notice
			57		Audio Output Specifications
			59		Area Code List
			60		Language Code List
			61		Trademarks and Licenses
			63		Specifications
			64		Maintenance
			64		–  Handling the Unit
			64		–  Notes on Discs
			65		Important Information Relating to
					Network Services

1

2

3

4

5

6

Some of the content in this manual may differ from your player depending on the software of the player or your service provider.

1 GettingStarted

8 Getting Started

Introduction

Playable Discs and symbols used in this manual

	Media/Term	Logo		Symbol	Description
					yy Discs such as movies that can be purchased or
				e	rented.
					yy “Blu-ray 3D” discs and “Blu-ray 3D ONLY” discs.
	Blu-ray				yy BD-R/RE discs that are recorded in BDAV format.
				y	yy BD-R/RE discs that contain Movie, Music or
				u	Photo files.
				i	yy ISO 9660+JOLIET, UDF and UDF Bridge format
					yy Discs such as movies that can be purchased or
				r	rented.
					yy Movie mode and finalized only
	DVD-ROM				yy Supports the dual layer disc also
	DVD-R
				o	Finalized AVCHD format
	DVD-RW
	DVD+R
				y	yy DVD±R/RW discs that contain Movie, Music or
	DVD+RW
				u	Photo files.
					yy ISO 9660+JOLIET, UDF and UDF Bridge format
				i
	DVD-RW (VR)			r	VR mode and finalized only
	Audio CD			t	Audio CD
				y	yy CD-R/RW discs that contain Movie, Music or
	CD-R/RW			u	Photo files.
				i	yy ISO 9660+JOLIET, UDF and UDF Bridge format
	Note	–		,	Indicates special notes and operating features.
	Caution	–		>	Indicates cautions for preventing possible
					damages from abuse.

Getting Started	9

,,Note

yy Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be played on the unit.

yy Depending on the recording software & the finalization, some recorded discs (CD-R/RW, DVD±R/RW, BD-R/RE) may not be playable.

yy BD-R/RE, DVD±R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD Recorder may not play if the disc is damaged or dirty, or if there is dirt or condensation on the player’s lens.

yy If you record a disc using a personal computer, even if it is recorded in a compatible format, there are cases in which it may not play because of the settings of the application software used to create the disc. (Check with the software publisher for more detailed information.)

yy This player requires discs and recordings to meet certain technical standards in order to achieve optimal playback quality.

yy Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain pre-existing conditions to ensure compatible playback.

yy Customers should note that permission is required in order to download MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner.

yy You have to set the disc format option to [Mastered] in order to make the discs compatible with the LG players when formatting rewritable discs. When setting

the option to Live System, you cannot use it on LG player. (Mastered/Live File System : Disc format system for windows Vista)

About the “7” Symbol Display

“7” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specific media.

Regional Code

This unit has a regional code printed on the rear of the unit. This unit can play only BD-ROM or DVD discs labelled same as the rear of the unit or “ALL”.

System Select

Open the disc tray using the B(OPEN/CLOSE) button and then, press and hold M(PAUSE) for more than five seconds to change the color system (PAL /NTSC /AUTO).

1 GettingStarted

1 GettingStarted

10 Getting Started

Remote Control

• • • • • • A• • •

•

1(POWER): Switches the player ON or OFF.

B(OPEN/CLOSE): Opens and closes the disc tray.

0-9 numerical buttons: Selects numbered options in a menu.

CLEAR: Removes a number when setting the password or network connection.

REPEAT (h): Repeats a desired section or sequence.

• • • • • • B• • •

•

c/v(SCAN): Searches backward or forward.

C/V(SKIP): Goes to the next or previous chapter / track / file.

Z(STOP): Stops playback. d(PLAY): Starts playback. M(PAUSE): Pauses playback.

• • • • • • C• • •

•

HOME (b): Displays or exits the [Home].

• • • • • • D• • •

•

Colored (R, G, Y, B) buttons: Use to navigate BD-ROM menus. They are also used as shortcut buttons for specific menus.

TV Control Buttons: See page 51.

Battery Installation

Remove the battery cover on the rear of the remote control, and insert a R03 (size AAA) battery with 4and 5matched correctly.

TITLE/POPUP: Displays the DVD title menu or BD-ROM’s pop-up menu, if available.

INFO/MENU (m): Displays or exits On-Screen Display.

Direction buttons (W/S/ A/D): Selects an option in the menu.

ENTER (b): Acknowledges menu selection.

BACK (1): Exits the menu or returns to the previous screen.

?: This button is not available.

DISC MENU: Accesses menu on a disc.

Getting Started 11

Front Panel

1 GettingStarted

A Disc Tray	E N(PLAY / PAUSE)
B Display Window	F Z(STOP)
C Remote Sensor	G 1/!(POWER)
D B(OPEN / CLOSE)	H USB Port

Rear Panel

A AC power cord				C HDMI OUT
B LAN port				D DIGITAL AUDIO OUT (COAXIAL)

12 Connecting

Connecting to Your TV

If you have a HDMI TV or monitor, you can connect it to this player using a HDMI cable (Type A, High Speed HDMI™ Cable). Connect the HDMI jack on the player to the HDMI jack on a HDMI compatible TV or monitor.

2

Rear of the unit

<![if ! IE]>

<![endif]>Connecting

HDMI cable

TV

Set the TV’s source to HDMI (Refer to TV’s Owner’s manual).

,,Note

Please refer to the manuals of your TV, Stereo System or other devices as necessary to make the best connections.

Additional Information for HDMI

yy When you connect a HDMI or DVI compatible device make sure of the following:

-- Try switching off the HDMI/DVI device and this player. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this player.

-- The connected device’s video input is set correctly for this unit.

-- The connected device is compatible with 720x576p, 1280x720p, 1920x1080i or 1920x1080p video input.

yy Not all HDCP-compatible HDMI or DVI devices will work with this player.

-- The picture will not be displayed properly with non-HDCP device.

,,Note

yy If a connected HDMI device does not accept the audio output of the player, the HDMI device’s audio sound may be distorted or may not output.

yy When you use HDMI connection, you can change the resolution for the HDMI output. (Refer to “Resolution Setting” on page 13)

yy Select the type of video output from the HDMI OUT jack using [HDMI Color Setting] option on the [Settings] menu (see page 22).

yy Changing the resolution when the connection has already been established may result in malfunctions. To solve the problem, turn off the player and then turn it on again.

yy When the HDMI connection with HDCP is not verified, TV screen is changed to black screen. In this case, check the HDMI

connection, or disconnect the HDMI cable.

yy If there are noises or lines on the screen, please check the HDMI cable (length is generally limited to 4.5 m).

Connecting 13

What is SIMPLINK?

Some functions of this unit are controlled by the TV’s remote control when this unit and LG TV’s with SIMPLINK are connected through HDMI connection.

Controllable functions by LG TV’s remote control; Play, Pause, Scan, Skip, Stop, Power Off, etc.

Refer to the TV owner’s manual for the details of SIMPLINK function.

LG TV’s with SIMPLINK function has the logo as shown above.

,,Note

Depending on the disc type or playing status, some SIMPLINK operation may differ from your purpose or not work.

Resolution Setting

The player provides several output resolutions for HDMI OUT jack. You can change the resolution using [Settings] menu.

1.Press HOME (b).

2.Use A/Dto select the [Settings] and press ENTER (b). The [Settings] menu appears.

3.Use W/Sto select [DISPLAY] option then press Dto move to the second level.

4.Use W/Sto select the [Resolution] option then press ENTER (b) to move to the third level.

5.Use W/Sto select the desired resolution then press ENTER (b) to confirm your selection.

2

<![if ! IE]>

<![endif]>Connecting

2

<![if ! IE]>

<![endif]>Connecting

14 Connecting

,,Note

yy If your TV does not accept the resolution you have set on the player, you can set resolution to 576p as follows:

1.Press Bto open the disc tray.

2.Press Z(STOP) for more than 5 seconds.

yy If you select a resolution manually and then connect the HDMI jack to TV and your TV does not accept it, the resolution setting is set to [Auto].

yy If you select a resolution that your TV does not accept, the warning message will appear. After resolution change,

if you cannot see the screen, please wait 20 seconds and the resolution will automatically revert back to the previous resolution.

yy The 1080p video output frame rate may be automatically set to either 24 Hz or 50 Hz depending both on the capability and preference of the connected TV and

based on the native video frame rate of the content on the BD-ROM disc.

Connecting to an

Amplifier

Make one of the following connections, depending on the capabilities of your existing equipment.

yy HDMI Audio connection (page 15) yy Digital Audio connection (page 15)

Since many factors affect the type of audio output, see “Audio Output Specifications” for details (page 57).

About Digital Multi-channel sound

A digital multi-channel connection provides the best sound quality. For this, you need a multichannel Audio/Video Receiver that supports one or more of the audio formats supported by your player. Check the logos on the front of the Audio/ Video receiver and the manual. (PCM Stereo, PCM Multi-Ch, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS and/or DTS-HD)

Connecting 15

Connecting to an Amplifier via HDMI Output

Connect the player’s HDMI OUT jack to the corresponding in jack on your amplifier using a HDMI cable.

Connecting to an Amplifier via Digital Audio Output

Connect the player’s COAXIAL OUT jack to the corresponding in jack on your amplifier using an optional digital audio cable.

Rear of the unit	Rear of the unit

Coaxial cable

HDMI cable

Receiver/Amplifier

Receiver/Amplifier

HDMI cable

You will need to activate the player’s digital output. (See “[AUDIO] Menu” on page 23.)

TV

2

<![if ! IE]>

<![endif]>Connecting

Connect the amplifier’s HDMI output jack to HDMI input jack on your TV using a HDMI cable if your amplifier has HDMI output jack. (Refer to amplifier’s owner’s manual)

You will need to activate the player’s digital output. (See “[AUDIO] Menu” on page 23)

2

<![if ! IE]>

<![endif]>Connecting

16 Connecting

Connecting to your	service
Home Network
	Broadband
This player can be connected to a local area
network (LAN) via the LAN port on the rear panel.
By connecting the unit to a broadband home
network, you have access to services such as
software updates, BD-Live interactivity and on-line
content services.	Router

Wired network connection

Using a wired network provides the best performance, because the attached devices connect directly to the network and are not subject to radio frequency interference.

Please refer to the documentation for your network device for further instructions.

Connect the player’s LAN port to the corresponding port on your Modem or Router using a commercially available LAN or Ethernet cable.

,,Note

yy When plugging or unplugging the LAN cable, hold the plug portion of the cable. When unplugging, do not pull on the LAN cable but unplug while pressing down on the lock.

yy Do not connect a modular phone cable to the LAN port.

yy Since there are various connection configurations, please follow the specifications of your telecommunication carrier or internet service provider.

yy If you want to access content from DLNA servers, this player must be connected to the same local area network with them via a router.

DLNA certified servers

Rear of the unit

Wired Network Setup

If there is a DHCP server on the local area network (LAN) via wired connection, this player will automatically be allocated an IP address. After making the physical connection, a small number of home networks may require the player’s network setting to be adjusted. Adjust the [NETWORK] setting as follow.

	yy To set your PC as a DLNA server, install the	Preparation
	SmartShare PC Software on your PC. (page	Before setting the wired network, you need to
	33)
		connect the broadband internet to your home
		network.

Connecting 17

1. Select [Connection Setting] option in the	Advanced Setting
[Settings] menu then press ENTER (b).	If you want to set the network settings manually,
	use W/Sto select [Advanced Setting] on the
	[Network Setting] menu and press ENTER (b).
	1. Use W/S/A/Dto select the IP mode
	between [Dynamic] and [Static].
	Normally, select [Dynamic] to allocate an IP
	address automatically.

2.Read the preparations for the network settings and then press ENTER (b) while [Start] is highlighted.

Network will automatically be connected to the unit.

,,Note

If there is no DHCP server on the network and you want to set the IP address manually, select [Static] then set [IP Address], [Subnet Mask], [Gateway] and [DNS Server] using W/S/A/Dand numerical buttons. If you make a mistake while entering a number, press CLEAR to clear the highlighted part.

2.Select [Next] and press ENTER (b) to apply network settings.

Network connection status is displayed on the screen.

3.Press ENTER (b) while [OK] is highlighted to finish the wired network settings.

2

<![if ! IE]>

<![endif]>Connecting

2

<![if ! IE]>

<![endif]>Connecting

18 Connecting

	Notes on Network Connection	yy You must use a Router to use xDSL service.A
	yy Many network connection problems during	DSL modem is required to use DSL service and
		a cable modem is required to use cable modem
	set up can often be fixed by re-setting the
		service. Depending on the access method of and
	router or modem. After connecting the player
		subscriber agreement with your ISP, you may not
	to the home network, quickly power off and/
		be able to use the internet connection feature
	or disconnect the power cable of the home
		contained in this player or you may be limited
	network router or cable modem. Then power on
		to the number of devices you can connect at
	and/or connect the power cable again.
		the same time. (If your ISP limits subscription to
	yy Depending on the internet service provider (ISP),
		one device, this player may not be allowed to
	the number of devices that can receive internet	connect when a PC is already connected.)
	service may be limited by the applicable terms	yy The use of a “Router” may not be allowed or its
	of service. For details, contact your ISP.
		usage may be limited depending on the policies
	yy Our company is not responsible for any
		and restrictions of your ISP. For details, contact
	malfunction of the player and/or the internet	your ISP directly.
	connection feature due to communication
	errors/malfunctions associated with your
	broadband internet connection, or other
	connected equipment.
	yy The features of BD-ROM discs made available
	through the Internet Connection feature are not
	created or provided by our company, and our
	company is not responsible for their functionality
	or continued availability. Some disc related
	material available by the Internet Connection
	may not be compatible with this player. If you
	have questions about such content, please
	contact the producer of the disc.
	yy Some internet contents may require a higher
	bandwidth connection.
	yy Even if the player is properly connected and
	configured, some internet contents may not
	operate properly because of internet congestion,
	the quality or bandwidth of your internet service,
	or problems at the provider of the content.
	yy Some internet connection operations may not
	be possible due to certain restrictions set by the
	Internet service provider (ISP) supplying your
	broadband Internet connection.
	yy Any fees charged by an ISP including, without
	limitation, connection charges are your
	responsibility.
	yy A 10 Base-T or 100 Base-TX LAN port is required
	for wired connection to this player. If your
	internet service does not allow for such a
	connection, you will not be able to connect the
	player.

System Setting 19

Initial Setup	previous steps.
	4. Check all the settings that you have set in the

When you turn on the unit for the first time, the initial setup wizard appears on the screen. Set the display language and network settings on the initial setup wizard.

1.Press 1(POWER).

The initial setup wizard appears on the screen.

2.	Use W/S/A/Dto select a display language	Press ENTER (b) while [Finish] is highlighted
	and press ENTER (b).	to finish the initial setup settings. If there is any
		settings to be changed, use W/S/A/Dto
		select 1and press ENTER (b).
		5. Displays private sound mode guide. Press ENTER
		(b).
3.	Read and prepare the preparations for the
	network settings and then press ENTER (b)
	while [Start] is highlighted.

If wired network is connected, the network connection setting will automatically be finished.

For details on network settings, refer to “Connecting to your Home Network” on page 16.

3

<![if ! IE]>

<![endif]>Setting System

3

<![if ! IE]>

<![endif]>Setting System

20 System Setting

Settings

Adjust the Setup Settings

You can change the settings of the player in the [Settings] menu.

1. Press HOME (b).

2.Use A/Dto select the [Settings] and press ENTER (b). The [Settings] menu appears.

3.Use W/Sto select the first setup option, and press ENTER (b) to move to the second level.

4.Use W/Sto select a second setup option, and press ENTER (b) to move to the third level.

[NETWORK] Menu

The [NETWORK] settings are needed to use the software update, BD-Live and on-line content services.

Connection Setting

If your home network environment is ready to connect the player, the player needs to be set the wired network connection for network

communication. (See “Connecting to your Home Network” on page 16.)

Connection Status

If you want to check tshe network status on this player, select the [Connection Status] options and press ENTER (b) to check whether a connection to the network and the internet have been established.

BD-LIVE connection

You can restrict Internet access when BD-Live functions are used.

[Permitted]

Internet access is permitted for all BD-Live contents.

[Partially permitted]

Internet access is permitted only for BDLive contents which have content owner certificates. Internet access and AACS Online

functions are prohibited for all BD-Live contents without a certificate.

[Prohibited]

Internet access is prohibited for all BD-Live contents.

5.Use W/Sto select a desired setting, and press ENTER (b) to confirm your selection.