LG 47LB5800 User Manual [es]
OWNER’S MANUAL
LED TV*
*LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and retain it
for future reference.
39LB5800
42LB5800
47LB5800
55LB5800
60LB5800
*MFL68027712*
32LB570B
32LB580B
www.lg.com
P/NO : MFL68027712 (1405-REV02)
IMPORTANT SAFETY INSTRUCTIONS
Short-circuit
Breaker
Power Supply
Short-circuit
Breaker
Power Supply
WARNING/CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
2
IMPORTANT SAFETY INSTRUCTIONS
Always comply with the following precautions to avoid dangerous situations and ensure peak
performance of your product.
Read these instructions.
WARNING/CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK DO
NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of
uninsulated dangerous voltage within the
product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
ENGLISH
ENG
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
y
Clean only with a dry cloth.
y
Do not block any ventilation openings. Install in
y
accordance with the manufacturer’s instructions.
WARNING/CAUTION
- TO REDUCE THE RISK OF FIRE AND ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
WARNING
If you ignore the warning message, you may be
seriously injured or there is a possibility of accident
or death.
CAUTION
If you ignore the caution message, you may be
slightly injured or the product may be damaged.
NOTE
The note helps you understand and use the
product safely. Please read the note carefully
before using the product.
Do not install near any heat sources such
y
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized
y
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet (Can differ by
country).
IMPORTANT SAFETY INSTRUCTIONS
Short-circuit
Breaker
Power Supply
Short-circuit
Breaker
Power Supply
Short-circuit
Breaker
Power Supply
3
Do not press strongly upon the panel with a hand
y
or a sharp object such as a nail, pencil or pen, or
make a scratch on it.
Protect the power cord from being walked on
y
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
Only use attachments/accessories specified by
y
the manufacturer.
Use only with a cart, stand, tripod, bracket, or
y
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
Unplug this apparatus during lightning storms or
y
when unused for long periods of time.
Refer all servicing to qualified service personnel.
y
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
Keep the packing anti-moisture material or vinyl
y
packing out of the reach of children. Anti-moisture
material is harmful if swallowed. If swallowed
by mistake, force the patient to vomit and visit
the nearest hospital. Additionally, vinyl packing
can cause suffocation. Keep it out of the reach of
children.
CAUTION concerning the Power Cord
y
(Can differ by country):
It is recommended that appliances be placed
upon a dedicated circuit; that is, a single outlet
circuit which powers only that appliance and
has no additional outlets or branch circuits.
Check the specification page of this owner’s
manual to be certain. Do not connect too many
appliances to the same AC power outlet as
this could result in fire or electric shock. Do not
overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire
insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically
examine the cord of your appliance, and if its
appearance indicates damage or deterioration,
unplug it, discontinue use of the appliance, and
have the cord replaced with an exact replacement
part by an authorized service. Protect the power
cord from physical or mechanical abuse, such
as being twisted, kinked, pinched, closed in a
door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord
exits the appliance. Do not move the TV with the
power cord plugged in. Do not use a damaged
or loose power cord. Be sure do grasp the plug
when unplugging the power cord. Do not pull on
the power cord to unplug the TV.
- To reduce the risk of fire or electrical
Warning
y
shock, do not expose this product to rain,
moisture or other liquids. Do not touch the TV
with wet hands. Do not install this product near
flammable objects such as gasoline or candles, or
expose the TV to direct air conditioning.
ENGENGLISH
Do not stick metal objects or any other
y
conductive material into the power cord. Do
not touch the end of the power cord while it is
plugged in.
IMPORTANT SAFETY INSTRUCTIONS
4
y
y
y
ENGLISH
ENG
y
y
Do not expose to dripping or splashing and do
not place objects filled with liquids, such as
vases, cups, etc. on or over the apparatus (e.g. on
shelves above the unit).
Grounding
(Except for devices which are not grounded.)
Ensure that you connect the earth ground wire to
prevent possible electric shock (i.e. a TV with a
three-prong grounded AC plug must be connected
to a three-prong grounded AC outlet). If grounding
methods are not possible, have a qualified
electrician install a separate circuit breaker. Do not
try to ground the unit by connecting it to telephone
wires, lightening rods, or gas pipes.
Short-circuit
Breaker
Power Supply
As long as this unit is connected to the AC wall
outlet, it is not disconnected from the AC power
source even if the unit is turned off.
Do not attempt to modify this product in any way
without written authorization from LG Electronics.
Unauthorized modification could void the user’s
authority to operate this product.
Outdoor Antenna Grounding
(Can differ by country):
If an outdoor antenna is installed, follow the
precautions below. An outdoor antenna system
should not be located in the vicinity of overhead
power lines or other electric light or power circuits,
or where it can come in contact with such power
lines or circuits as death or serious injury can occur.
Be sure the antenna system is grounded so as to
provide some protection against voltage surges
and built-up static charges. Section 810 of the
National Electrical Code (NEC) in the U.S.A. provides
information with respect to proper grounding of the
mast and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna discharge
unit, connection to grounding electrodes and
requirements for the grounding electrode.
Antenna grounding according to the National
Electrical Code, ANSI/NFPA 70
Antenna Lead in Wire
Ground Clamp
Electric Service
Equipment
Ground Clamp
Cleaning
y
NEC: National Electrical Code
Antenna Discharge Unit
(NEC Section 810-20)
Grounding Conductor
(NEC Section 810-21)
Power Service Grounding
Electrode System
(NEC Art 250, Part H)
When cleaning, unplug the power cord and wipe
gently with a soft cloth to prevent scratching. Do
not spray water or other liquids directly on the TV
as electric shock may occur. Do not clean with
chemicals such as alcohol, thinners or benzine.
Moving
y
Make sure the product is turned off, unplugged and
all cables have been removed. It may take 2 or more
people to carry larger TVs. Do not press or put stress
on the front panel of the TV.
Ventilation
y
Install your TV where there is proper ventilation. Do
not install in a confined space such as a bookcase.
Do not cover the product with cloth or other materials
while plugged. Do not install in excessively dusty
places.
If you smell smoke or other odors coming from the
y
TV, unplug the power cord and contact an authorized
service center.
Keep the product away from direct sunlight.
y
Never touch this apparatus or antenna during a
y
thunder or lightning storm.
When mounting a TV on the wall, make sure not to
y
install the TV by hanging the power and signal cables
on the back of the TV.
Do not allow an impact shock or any objects to fall
y
into the product, and do not drop anything onto the
screen.
Disconnecting the Main Power
y
The power outlet used with this device must remain
easily accessible.
Store the accessories (battery, etc.) in a safe location
y
out of the reach of children.
This apparatus use batteries. In your community
y
there might be regulations that require you to dispose
of these batteries properly due to environmental
considerations. Please contact your local authorities
for disposal or recycling information.
Do not dispose of batteries in a fire.
y
Do not short circuit, disassemble or allow the
y
batteries to overheat.
Dot Defect
y
The Plasma or LCD panel is a high technology
product with resolution of two million to six million
pixels. In a very few cases, you could see fine dots
on the screen while you’re viewing the TV. Those
dots are deactivated pixels and do not affect the
performance and reliability of the TV.
Generated Sound
y
Cracking noise
watching or turning off the TV is generated by plastic
thermal contraction due to temperature and humidity.
This noise is common for products where thermal
deformation is required.
Electrical circuit humming/panel buzzing
noise is generated from a high-speed switching
circuit, which supplies a large amount of current
to operate a product. It varies depending upon the
product. This generated sound does not affect the
performance and reliability of the product.
Take care not to touch the ventilation openings.
y
When watching the TV for a long period, the
ventilation openings may become hot. This does
not affect the performance of the product or cause
defects in the product.
Do not install this product on a wall if it could be
y
exposed to oil or oil mist. This may damage the
product and cause it to fall.
If the TV feels cold to the touch, there may be a small
y
“flicker” when it is turned on. This is normal, there
is nothing wrong with TV. Some minute dot defects
may be visible on the screen, appearing as tiny red,
green, or blue spots. However, they have no adverse
effect on the TV’s performance. Avoid touching the
LCD screen or holding your finger(s) against it for
long periods of time. Doing so may produce some
temporary distortion effects on the screen.
A cracking noise that occurs when
A low level
IMPORTANT SAFETY INSTRUCTIONS
5
ENGENGLISH
Preventing “Image burn” or “Burn-in” on
your TV screen
If a fixed image displays on the TV screen for a long
y
period of time, it will be imprinted and become a
permanent disfigurement on the screen. This is “image
burn” or “burn-in” and not covered by the warranty.
If the aspect ratio of the TV is set to 4:3 for a long period
y
of time, image burn may occur on the letterboxed area
of the screen.
Avoid displaying a fixed image on the TV screen for a
y
long period of time (2 or more hours for LCD, 1 or more
hours for the Plasma TV) to prevent image burn.
LICENSES / OPEN SOURCE SOFTWARE NOTICE
6
LICENSES
Supported licenses may differ by model. For more information about licenses, visit
www.lg.com
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in
ENGLISH
ENG
this product, please visit
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of media, shipping and handling) upon email request
to ‘opensource@lge.com’. This offer is valid for three (3) years from the date on which you purchased
the product.
NOTE
Image shown may differ from your TV.
y
Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
y
The available menus and options may differ from the input source or product model that you are
y
using.
New features may be added to this TV in the future.
y
http://opensource.lge.com
.
.
ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
7
Remote Control,
Batteries (AAA)
(For 32LB570B,
32LB580B)
Stand Screws
4 EA, M4 x L20
Tag On
Tag On Cable Holder
Owner’s Manual
(For 39/42/47/55
/60LB5800) (For 42LB5800)
Stand Screws
4 EA, M4 x L14
Power Cord Stand Base
Wall Mount Spacer
2 EA
Stand Holder
2 EA
ENGENGLISH
ASSEMBLING AND PREPARING
8
CAUTION
Do not use any unapproved items to ensure the safety and product life span.
y
Any damages or injuries by using unapproved items are not covered by the warranty.
y
In case of some model, the thin film on screen is a part of TV, So don’t take it off.
y
NOTE
The items supplied with your product may vary depending upon the model.
y
Product specifications or contents of this manual may be changed without prior notice due to
y
upgrade of product functions.
For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm
y
thick and 18 mm width.
Use an extension cable that supports USB 2.0 if the USB cable or USB FLASH DRIVE does not
y
fit into your TV’s USB port.
B
A
18 mm
ENGLISH
ENG
B
A
*A 10 mm
*B
Optional Extras
Optional extras can be changed or modified for quality improvement without any notification.
Contact your dealer for buying these items. These devices only work with certain models.
The model name or design may be changed manufacturer’s circumstances or policies.
AN-MR500
Magic Remote
Tag On AN-WF500
AN-VC5**
Video Call Camera
Wi-Fi/Bluetooth DONGLE
LG Audio Device
Parts and buttons
Power Indicator
Screen
Speakers
ASSEMBLING AND PREPARING
9
Remote control Sensor
Joystick button is located
y
below the screen of TV.
NOTE
You can set the Power indicator Light to on or off by selecting
y
(Depending upon model)
Joystick Button
NOTE
OPTION
ENGENGLISH
in the main menus.
ASSEMBLING AND PREPARING
10
Using the joystick button
You can operate the TV by pressing the button or moving the joystick left, right, up, or down.
Basic functions
Power On
Power Off
Volume Control
Channels Control
When the TV is turned off, place your finger on the joystick button and
press it once and release it.
When the TV is turned on, place your finger on the joystick button and
press it once for a few seconds and release it.
(However, if the Menu button is on the screen, pressing and holding the
joystick button will let you exit the Menu.)
If you place your finger over the joystick button and move it left or right,
you can adjust the volume level you want.
If you place your finger over the joystick button and move it up or down,
you can scrolls through the saved channels you want.
NOTE
When your finger over the joystick button and push it to the up, down, left, or right, be careful
y
not to press the joystick button. If you press the joystick button first, you can not adjust the
volume level and saved chennels.
ENGLISH
ENG
Adjusting the menu
When the TV is turned on, press the joystick button one time.
You can adjust the Menu items ( , , , ) moving the joystick button up, down, left, or right.
TV Off
Settings
Close
Input List
Turns the power off.
Accesses the main menu.
Clears on-screen displays and returns to TV viewing.
Changes the input source.
Lifting and moving the TV
When moving or lifting the TV, read the following
to prevent the TV from being scratched or
damaged and for safe transportation regardless
of its type and size.
CAUTION
Avoid touching the screen at all times, as
y
this may result in damage to the screen.
Do not place the product on the floor with
y
its front facing down without padding.
Failure to do so may result in damage to
the screen.
It is recommended to move the TV in the
y
box or packing material that the TV originally
came in.
Before moving or lifting the TV, disconnect
y
the power cord and all cables.
When holding the TV, the screen should
y
face away from you to avoid damage.
Hold the top and bottom of the TV frame
y
firmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.
ASSEMBLING AND PREPARING
Use at least two people to move a large TV.
y
When transporting the TV by hand, hold the
y
TV as shown in the following illustration.
When handling the TV, be careful not to
y
damage the protruding joystick button.
When transporting the TV, do not expose
y
the TV to jolts or excessive vibration.
When transporting the TV, keep the TV
y
upright; never turn the TV on its side or tilt
towards the left or right.
11
ENGENGLISH
ASSEMBLING AND PREPARING
12
Setting up the TV
You can mount your TV to a wall or attach
the stand if you wish to place the TV on an
entertainment center or other furniture.
Attaching the stand
If you are not mounting the TV to a wall, use the
following instructions to attach the stand.
CAUTION
When attaching the stand to the TV
y
set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
1
ENGLISH
ENG
B stand base
1
A stand base
2
(For 32LB570B,
32LB580B)
4 EA
M4 x L20
(For 39/42/47/55
60LB5800)
4 EA
M4 x L14
Mounting on a table
Lift and tilt the TV into its upright position on
1
a table.
- Leave a 10 cm (minimum) space from the
wall for proper ventilation.
2
10 cm
Connect the power cord to a wall outlet.
2
10 cm
10 cm
10 cm
CAUTION
Do not place the TV near or on sources
y
of heat, as this may result in fire or other
damage.
ASSEMBLING AND PREPARING
13
Securing the TV to a wall (optional)
(Depending upon model)
Insert and tighten the eye-bolts, or TV
1
brackets and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
Mount the wall brackets with the bolts
2
to the wall.
Match the location of the wall bracket and
the eye-bolts on the rear of the TV.
Connect the eye-bolts and wall brackets
3
tightly with a sturdy rope or cable.
Make sure to keep the rope parallel to the
flat surface.
CAUTION
Make sure that children do not climb on
y
or hang on the TV.
NOTE
Use a platform or cabinet that is strong
y
and large enough to support the TV
securely.
Brackets, bolts, and ropes, are optional.
y
You can obtain additional accessories
from your local dealer.
Mounting on a wall
An optional wall mount can be used with your
LG Television. Consult with your local dealer for
a wall mount that supports the VESA standard
used by your TV model. Carefully attach the wall
mount bracket at the rear of the TV. Install the
wall mount bracket on a solid wall perpendicular
to the floor. If you are attaching the TV to other
building materials, please contact qualified
personnel to install the wall mount. Detailed
instructions will be included with the wall mount.
We recommend that you use an LG brand wall
mount. When you do not use LG’s wall mount
bracket, please use a wall mount bracket where
the device is adequately secured to the wall with
enough space to allow connectivity to external
devices.
10 cm
10 cm
Make sure to use screws and wall mounts that
meet the VESA standard. Standard dimensions
for the wall mount kits are described in the
following table.
Model 32LB570B
VESA (A x B)
A
B
Standard screw M6 M6
Number of screws 4 4
Wall mount
bracket (optional)
Model 60LB5800
VESA (A x B)
A
B
Standard screw M6
Number of screws 4
Wall mount
bracket (optional)
32LB580B
39LB5800
200 x 200 400 x 400
LSW240B
MSW240
400 x 400
LSW440B
10 cm
10 cm
42LB5800
47LB5800
55LB5800
LSW440B
MSW240
ENGENGLISH
ASSEMBLING AND PREPARING
14
y
y
y
y
ENGLISH
ENG
CAUTION
Disconnect the power first, and then
move or install the TV. Otherwise electric
shock may occur.
If you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury.
Use an authorized LG wall mount and
contact the local dealer or qualified
personnel.
Do not over tighten the screws as this
may cause damage to the TV and void
your warranty.
Use the screws and wall mounts that
meet the VESA standard. Any damages
or injuries by misuse or using an improper
accessory are not covered by the
warranty.
NOTE
Use the screws that are listed on the VESA
y
standard screw specifications.
The wall mount kit includes an installation
y
manual and necessary parts.
The wall mount bracket is optional. You can
y
obtain additional accessories from your local
dealer.
The length of screws may differ depending
y
upon the wall mount. Make sure to use the
proper length.
For more information, refer to the manual
y
supplied with the wall mount.
When attaching a wall mounting bracket to
y
the TV, insert the wall mount inner spacers
into the TV wall mount holes to adjust the
vertical angle of the TV.
(For 42LB5800)
Wall Mount
Spacers
MAKING CONNECTIONS
ANTENNA
IN
15
MAKING CONNECTIONS
You can connect various external devices to the TV. Supported external devices are: HD receivers,
DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external
devices. For more information on external device’s connection, refer to the manual provided with each
device.
NOTE
If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal
y
input cable to the TV through a DVD recorder or VCR. For more information of recording, refer
to the manual provided with the connected device.
The external device connections shown may differ slightly from illustrations in this manual.
y
Connect external devices to the TV regardless of the order of the TV port.
y
If you connect a gaming device to the TV, use the cable supplied with the gaming device.
y
Refer to the external equipment’s manual for operating instructions.
y
Connecting to an antenna or cable
Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations
may differ from the actual items. And a RF cable is optional.
VHF Antenna
UHF Antenna
ENGENGLISH
ANTENNA
IN
Coaxial (75Ω)
(*Not Provided)
Antenna
Terminal
CAUTION
Make sure not to bend the copper wire of
y
the RF cable.
Copper wire
Complete all connections between
y
devices, and then connect the power cord
to the power outlet to prevent damage to
your TV.
or
CABLE
IN
Coaxial (75Ω)
(*Not Provided)
NOTE
To improve the picture quality in a poor
y
signal area, please purchase a signal
amplifier and install properly.
Use a signal splitter to use 2 TVs or more.
y
If the antenna is not installed properly,
y
contact your dealer for assistance.
DTV Audio Supported Codec: MPEG,
y
Dolby digital, AAC, HE-AAC
Wall Jack
Loading...