LG 42LB561V, 55LB561V, 47LB561V, 50LB561V User Manual [en,it]

OWNER’S MANUAL

LED TV*

* LG LED TV applies LCD screen with LED backlights.

Please read this manual carefully before operating your set and retain it for future reference.

LB55**

LB56**

LB62**

*MFL68003807*

P/NO : MFL68003807 (1402-REV00)	www.lg.com
Printed in Korea

A-2 TABLE OF CONTENTS

TABLE OF CONTENTS

A-3 SETTING UP THE TV

A-3 Attaching the stand

A-4 MAKING CONNECTIONS

A-4 Antenna connection

A-4 Satellite dish connection

A-5 Euro Scart connection

A-6 Other connections

LANGUAGE LIST

English

Italiano

B-1 SPECIFICATIONS

B-6 REGULATORY

COMMON

LANGUAGE

COMMON

SETTING UP THE TV A-3

SETTING UP THE TV

(Only LB56**-ZT / ZQ, LB62**-ZE)

Image shown may differ from your TV.

Attaching the stand	1

A Stand Base

(Only LB55**, LB56**-ZE / ZC, LB62**-ZA / ZB)

B Stand Base

1

A Stand Base

B Stand Base

2

2

	M4 x L14
	(Only 32LB55**,
	32LB56**-ZE / ZC,
4EA	32LB62**-ZA / ZB)
	M4 x L20

	M4 x L14
	(Only 32LB56**-ZT / ZQ,
4EA	32LB62**-ZE)
	M4 x L20

CAUTION

yyWhen attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

A-4 MAKING CONNECTIONS

MAKING CONNECTIONS

This section on MAKING CONNECTIONS mainly uses diagrams for the 47LB561V models.

Antenna connection

Wall Antenna	ANTENNA /
Socket

*Not Provided

English

Connect the TV to a wall antenna socket with an RF cable (75 Ω).

NOTE

yyUse a signal splitter to use more than 2 TVs.

yyIf the image quality is poor, install a signal amplifier properly to improve the image quality.

yyIf the image quality is poor with an antenna connected, try to realign the antenna in the correct direction.

yyAn antenna cable and converter are not supplied.

yySupported DTV Audio: MPEG, Dolby Digital, Dolby Digital Plus, HE-AAC

Italiano

Collegare il televisore all’antenna centralizzata con

un

(75 Ω).

NOTA

yyUtilizzare uno sdoppiatore del segnale per più di 2 televisori.

yySe la qualità dell’immagine è scarsa, installare correttamente un amplificatore del segnale per migliorarla.

yySe la qualità dell’immagine è scarsa con un’antenna collegata, provare a riallineare l’antenna nella direzione corretta.

yyIl cavo e il convertitore dell’antenna non sono in dotazione.

yyAudio DTV supportato: MPEG, Dolby Digital, Dolby Digital Plus, HE-AAC

Satellite dish connection

(Only satellite models)

Satellite	13/18V
Dish	700mA Max
	LNB
	Satellite IN

*Not Provided

English

Connect the TV to a satellite dish to a satellite socket with a satellite RF cable (75 Ω).

Italiano

Collegare la TV a un’antenna satellitare e a una presa satellitare con un cavo RF satellitare (75 Ω).

MAKING CONNECTIONS A-5

Euro Scart connection		Italiano

*Not Provided

English

Transmits the video and audio signals from an external device to the TV set. Connect the external device and the TV set with the euro scart cable as shown.

	Output
	Type	AV1
Current		(TV Out1)
input mode
Digital TV		Digital TV
Analogue TV, AV
Component		Analogue TV
HDMI

1 TV Out : Outputs Analogue TV or Digital TV signals.

NOTE

yyAny Euro scart cable used must be signal shielded.

yyWhen watching digital TV in 3D imaging mode, only 2D out signals can be output through the SCART cable. (Only 3D models)

Consente la trasmissione dei segnali audio e video da un dispositivo esterno al televisore.

Collegare il dispositivo esterno e il televisore con il cavo Euro Scart come mostrato nell’illustrazione di seguito.

	Tipo di uscita
	Modalità	AV1
		(Uscita TV1)
	di ingresso
	corrente
	TV digitale	TV digitale
	TV analogica, AV
	Component	TV analogica
	HDMI

1 Uscita TV : uscite segnali TV analogica o TV digitale.

NOTA

yyI cavi Euro Scart devono essere schermati.

yyQuando si guarda il TV digitale in modalità immagini 3D, solo i segnali di uscita 2D possono passare attraverso il cavo SCART. (Solo modelli 3D)

A-6 MAKING CONNECTIONS

Other connections

(Only LAN PORT models)

IN

OPTICAL

DIGITAL

AUDIO OUT

OPTICALAUDIO IN

13/18V

700mA Max
LNB	ANTENNA /
Satellite IN	CABLE IN

HDMI

DVD/ Blu-Ray / HD Cable Box / HD STB / PC

(Only Satellite models)

		YELLOW	GREEN
			BLUE
			RED
		WHITE	WHITE
		RED	RED
<![if ! IE]> <![endif]>YELLOW	<![if ! IE]> <![endif]>WHITE	<![if ! IE]> <![endif]>RED	<![if ! IE]> <![endif]>RED	<![if ! IE]> <![endif]>WHITE	<![if ! IE]> <![endif]>RED	<![if ! IE]> <![endif]>BLUE	<![if ! IE]> <![endif]>GREEN
	(MONO)		AUDIO		VIDEO

Digital Audio System

DVD/ Blu-Ray / HD Cable Box / VCR

DVD/ Blu-Ray / HD Cable Box

MAKING CONNECTIONS A-7

	<![if ! IE]> <![endif]>USBIN
HDMI 2 port position	<![if ! IE]> <![endif]>IN2(MHL)
varies by model.
Only LB56**, LB62** series	<![if ! IE]> <![endif]>OUT
	<![if ! IE]> <![endif]>H/P

PCMCIA card

USB / HDD

Mobile phone

Headphone

English

Connect your TV to external devices. For the best

picture and audio quality, connect the external device and the TV with the HDMI cable as shown. Some separate cable is not provided.

Italiano

Collegare il TV ai dispositivi esterni. Per una migliore qualità audio e delle immagini, collegare il dispositivo esterno e il TV utilizzando il cavo HDMI come indicato di seguito.Alcuni cavi separati non sono forniti con il prodotto.

A-8 MAKING CONNECTIONS

English

Italiano

Connect various external devices to the TV and switch input modes to select an external device.

For more information of external device’s connection, refer to the manual provided with each device. Available external devices are:

HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.

	NOTE
yy
	device connection may differ from
	.

yyConnect external devices to the TV regardless of the order of the TV port.

yyIf you record a TV programme on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information of recording, refer to the manual provided with the connected device.

yyRefer to the external equipment’s manual for operating instructions.

yyIf you connect a gaming device to the TV, use the cable supplied with the gaming device.

yyIn PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear.

yyIn PC mode, some resolution settings may not work properly depending on the graphics card.

Collegare diversi dispositivi esterni al televisore e modificare la modalità di ingresso per selezionare un dispositivo esterno. Per ulteriori informazioni

sul collegamento di un dispositivo esterno, consultare il manuale fornito in dotazione con ciascun dispositivo.

È possibile collegare i seguenti dispositivi esterni: ricevitori HD, lettori DVD, VCR, sistemi audio, periferiche di archiviazione USB, PC, console per videogiochi e altri dispositivi esterni.

	NOTA
yy		del dispositivo esterno può
	variare in base al modello.

yyCollegare i dispositivi esterni al televisore a prescindere dall’ordine della porta del televisore.

yySe si registra un programma TV su un registratore DVD o VCR, accertarsi di collegare il cavo di ingresso del segnale al televisore attraverso un registratore DVD o VCR. Per ulteriori informazioni sulla registrazione, consultare il manuale fornito in dotazione con il dispositivo collegato.

yyConsultare il manuale dell’apparecchiatura esterna per le istruzioni operative.

yySe si collega una console per videogiochi alla TV, utilizzare il cavo fornito con il dispositivo.

yyIn modalità PC, possono essere presenti interferenze relative alla risoluzione, schemi verticali, contrasto o luminosità. In caso

di interferenze, modificare la modalità PC impostando un’altra risoluzione o modificando la frequenza di aggiornamento oppure regolare luminosità e contrasto sul menu IMMAGINE finché non si ottiene un’immagine nitida.

yyA seconda della scheda grafica utilizzata, alcune impostazioni di risoluzione potrebbero non essere adatte alla modalità PC.

OWNER’S MANUAL

LED TV*

* LG LED TV applies LCD screen with LED backlights.

Please read this manual carefully before operating your set and retain it for future reference.

www.lg.com

<![if ! IE]>

<![endif]>ENGLISH

2LICENSES / OPEN SOURCE SOFTWARE NOTICE

LICENSES

Supported licenses may differ by model. For more information about licenses, visit www.lg.com.

Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that has passed rigorous testing to verify that it plays DivX video. Visit divx.com

for more information and software tools to convert your files into DivX videos.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies.

To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.

“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”

“DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.”

“Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274”

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to [e-mail].

This offer is valid for three (3) years from the date on which you purchased the product.

SAFETY INSTRUCTIONS	3

SAFETY INSTRUCTIONS

Please read these safety precautions carefully before using the product.

WARNING

yyDo not place the TV and/or remote control in the following environments: --A location exposed to direct sunlight

--An area with high humidity such as a bathroom

--Near any heat source such as stoves and other devices that produce heat

--Near kitchen counters or humidifiers where they can easily be exposed to steam or oil

--An area exposed to rain or wind --Near containers of water such as vases

Otherwise, this may result in fire, electric shock, malfunction or product deformation.

yyDo not place the product where it might be exposed to dust. This may cause a fire hazard.

yyMains Plug is the TV connecting/disconnecting device to AC mains electric supply.This plug must remain readily attached and operable when TV is in use.

yyDo not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off.

You may be electrocuted due to excess moisture.

yyMake sure to connect Mains cable to compliant AC mains socket with Grounded earth pin. (Except for devices which are not grounded on earth.) Otherwise possibility you may be electrocuted or injured.

yyInsert power cable plug completely into wall socket otherwise if not secured completely into socket, fire ignition may break out.

yyEnsure the power cord does not come into contact with hot objects such as a heater. This may cause a fire or an electric shock hazard.

yyDo not place a heavy object, or the product itself, on power cables. Otherwise, this may result in fire or electric shock.

yyBend antenna cable between inside and outside building to prevent rain from flowing in. This may cause water damaged inside the Product and could give an electric shock.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

4SAFETY INSTRUCTIONS

yyWhen mounting TV onto wall make sure to neatly install and isolate cabling from rear of TV as to not create possibility of electric shock /fire hazard.

yyDo not plug too many electrical devices into a single multiple electrical outlet. Otherwise, this may result in fire due to over-heating.

yyDo not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product.

yyKeep the anti-moisture packing material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

yyDo not let your children climb or cling onto the TV.

Otherwise, the TV may fall over, which may cause serious injury.

yyDispose of used batteries carefully to ensure that a small child does not consume them. Please seek DoctorMedical Attention immediately if child consumes batteries.

yyDo not insert any metal objects/conductors (like a metal chopstick/cutlery/screwdriver) between power cable plug and input Wall Socket while it is connected to the input terminal on the wall. Additionally, do not touch the power cable right after plugging into the wall input terminal. You may be electrocuted.

(Depending on model)

yyDo not put or store inflammable substances near the product.

There is a danger of combustion/explosion or fire due to careless handling of the inflammable substances.

yyDo not drop metallic objects such as coins, hair pins, chopsticks or wire into the product, or inflammable objects such as paper and matches. Children must pay particular attention.

Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the power cord and contact the service centre.

yyDo not spray water on the product or scrub with an inflammable substance (thinner or benzene). Fire or electric shock accident can occur.

yyDo not allow any impact, shock or any objects to fall into the unit, and do not drop anything onto the screen.

You may be injured or the product can be damaged.

SAFETY INSTRUCTIONS	5

yyNever touch this product or antenna during a thunder or lighting storm. You may be electrocuted.

yyNever touch the wall outlet when there is leakage of gas, open the windows and ventilate.

It may cause a fire or a burn by a spark.

yyDo not disassemble, repair or modify the product at your own discretion. Fire or electric shock accident can occur.

Contact the service centre for check, calibration or repair.

yyIf any of the following occur, unplug the product immediately and contact your local service centre.

--The product has been impacted by shock --The product has been damaged --Foreign objects have entered the product

--The product produced smoke or a strange smell This may result in fire or electric shock.

yyUnplug the TV from AC mains wall socket if you do not intend to use the TV for a long period of time.

Accumulated dust can cause fire hazard and insulation deterioration can cause electric leakage/shock/fire.

yyApparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

yyDo not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall.

CAUTION

yyInstall the product where no radio wave occurs.

yyThere should be enough distance between an outside antenna and power lines to keep the former from touching the latter even when the antenna falls.

This may cause an electric shock.

yyDo not install the product on places such as unstable shelves or inclined surfaces. Also avoid places where there is vibration or where the product cannot be fully supported. Otherwise, the product may fall or flip over, which may cause injury or damage to the product.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

6SAFETY INSTRUCTIONS

yyIf you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury.

yyIf you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop.

yyOnly use the attachments / accessories specified by the manufacturer.

yyWhen installing the antenna, consult with a qualified service technician. If not installed by a qualified technician, this may create a fire hazard or an electric shock hazard.

yyWe recommend that you maintain a distance of at least 2 to 7 times the diagonal screen size when watching TV.

If you watch TV for a long period of time, this may cause blurred vision.

yyOnly use the specified type of battery.

This could cause damage to the remote control.

yyDo not mix new batteries with old batteries.

This may cause the batteries to overheat and leak.

yyBatteries should not be exposed to excessive heat. For example, keep away from direct Sunlight , open fireplace and electric heaters .

yyDo not place non-rechargeable batteries in charging device.

yyMake sure there are no objects between the remote control and its sensor.

yySignal from Remote Control can be interrupted due to external/internal lighting eg Sunlight, fluorescent lighting.

If this occurs turn off lighting or darken viewing area.

yyWhen connecting external devices such as video game consoles, make sure the connecting cables are long enough.

Otherwise, the product may fall over, which may cause injury or damage the product.

yyDo not turn the product On/Off by plugging-in or unplugging the power plug to the wall outlet. (Do not use the power plug for switch.)

It may cause mechanical failure or could give an electric shock.

SAFETY INSTRUCTIONS	7

yyPlease follow the installation instructions below to prevent the product from overheating. --The distance between the product and the wall should be more than 10 cm.

--Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a cupboard).

--Do not install the product on a carpet or cushion.

--Make sure the air vent is not blocked by a tablecloth or curtain. Otherwise, this may result in fire.

yyTake care not to touch the ventilation openings when watching the TV for long periods as the ventilation openings may become hot. This does not affect the operation or performance of the product.

yyPeriodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.

yyPrevent dust collecting on the power plug pins or outlet. This may cause a fire hazard.

yyProtect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

yyDo not press strongly upon the panel with a hand or sharp object such as nail, pencil or pen, or make a scratch on it, as it may cause damage to screen.

yyAvoid touching the screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary or permanent distortion/damage to screen.

yyWhen cleaning the product and its components, unplug the power first and wipe it with a soft cloth. Applying excessive force may cause scratches or discolouration. Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the product and its panel.

Otherwise, this may result in fire, electric shock or product damage (deformation, corrosion or breakage).

yyAs long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by SWITCH.

yyWhen unplugging the cable, grab the plug and unplug it, by pulling at the plug. Don’t pull at the cord to unplug the power cord from the power board, as this could be hazardous.

yyWhen moving the product, make sure you turn the power off first. Then, unplug the power cables, antenna cables and all connecting cables.

The TV set or power cord may be damaged, which may create a fire hazard or cause electric shock.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

8SAFETY INSTRUCTIONS

yyWhen moving or unpacking the product, work in pairs because the product is heavy. Otherwise, this may result in injury.

yyContact the service centre once a year to clean the internal parts of the product. Accumulated dust can cause mechanical failure.

yyRefer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

yyIf the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with product.

yyThe panel is a high technology display product with resolution of two million to six million pixels. You may see tiny black dots and/or brightly coloured dots (red, blue or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and does not affect the performance and reliability of the product.

This phenomenon also occurs in third-party products and is not subject to exchange or refund.

yyYou may find different brightness and color of the panel depending on your viewing position(left/right/top/down).

This phenomenon occurs due to the characteristic of the panel. It is not related with the product performance, and it is not malfunction.

yyDisplaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video game) for a prolonged time may cause damage to the screen, resulting in retention of the image, which is known as image sticking. The warranty does not cover the product for image sticking.

Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours for LCD, 1 or more hours for Plasma).

Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders of the panel. This phenomenon also occurs in third-party products and is not subject to exchange or refund.

yyGenerated Sound

“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to tempera-ture and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a highspeed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product.

This generated sound does not affect the performance and reliability of the product.

SAFETY INSTRUCTIONS	9

Viewing 3D Imaging (Only 3D models)

WARNING

Viewing Environment

yyViewing Time

--When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain.

Those that have a photosensitive seizure or chronic illness

yySome users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular pattern from 3D contents.

yyDo not watch 3D videos if you feel nausea, are pregnant and/ or have a chronic illness such as epilepsy, cardiac disorder, or blood pressure disease, etc.

yy3D Contents are not recommended to those who suffer from stereo blindness or stereo anomaly. Double images or discomfort in viewing may be experienced.

yyIf you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism, you may have trouble sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than the average adult.

yyIf your eyesight varies between your right and left eye, revise your eyesight prior to watching 3D contents.

Symptoms which require discontinuation or refraining from watching 3D contents

yyDo not watch 3D contents when you feel fatigue from lack of sleep, overwork or drinking.

yyWhen these symptoms are experienced, stop using/watching 3D contents and get enough rest until the symptom subsides.

--Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain, dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue.

<![if ! IE]>

<![endif]>ENGLISH

10 SAFETY INSTRUCTIONS

<![if ! IE]>

<![endif]>ENGLISH

CAUTION

Viewing Environment

yyViewing Distance

-Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you feel discomfort in viewing 3D contents, move further away from the TV.

Viewing Age

yyInfants/Children

--Usage/ Viewing 3D contents for children under the age of 6 are prohibited.

--Children under the age of 10 may overreact and become overly excited because their vision is in development (for example: trying to touch the screen or trying to jump into it. Special monitoring and extra attention is required for children watching 3D contents.

--Children have greater binocular disparity of 3D presentations than adults because the distance between the eyes is shorter than one of adults. Therefore they will perceive more stereoscopic depth compared to adults for the same 3D image.

yyTeenagers

--Teenagers under the age of 19 may react with sensitivity due to stimulation from light in 3D contents. Advise them to refrain from watching 3D contens for a long time when they are tired.

yyElderly

--The elderly may perceive less 3D effect compared to the youth. Do not sit closer to the TV than the recommended distance.

Cautions when using the 3D glasses

yyMake sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly. yyDo not use 3D glasses instead of your normal glasses, sunglasses or protective goggles. yyUsing modified 3D glasses may cause eye strain or image distortion.

yyDo not keep your 3D glasses in extremely high or low temperatures. It will cause deformation.

yyThe 3D glasses are fragile and are easily scratched. Always use a soft, clean piece of cloth when wiping the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with chemicals.

ASSEMBLING AND PREPARING 11

NOTE

yyImage shown may differ from your TV.

yyYour TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.

yyThe available menus and options may differ from the input source or product model that you are using. yyNew features may be added to this TV in the future.

yyThe TV can be placed in standby mode in order to reduce the power consumption. And the TV should be turned off if it will not be watched for some time, as this will reduce energy consumption.

yyThe energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.

CAUTION

yyDo not use any unapproved items to ensure the safety and product life span.

yyAny damages or injuries by using unapproved items are not covered by the warranty. yySome models have a thin film attached on to the screen and this must not be removed.

NOTE

yyThe items supplied with your product may vary depending on the model.

yyProduct specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.

yyFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s USB port.

B	B	<
		*A = 10 mm
		<
A	A	*B = 18 mm

<![if ! IE]>

<![endif]>ENGLISH

12 ASSEMBLING AND PREPARING

<![if ! IE]>

<![endif]>ENGLISH

Remote control,					Owner’s manual		Power Cord
batteries (AAA)

Stand Base		Stand Base		Stand Screws
(Only LB55**, LB56**-ZE / ZC,		(Only LB56**-ZT / ZQ, LB62**-ZE)		4EA, M4 x L14
LB62**-ZA / ZB)				(Only 42/49LB55**,
				39/42/47/50/55/60LB56**,
				42/49/55LB62**)

Stand Screws		Wall Mount Spacers		Cable Managements
4EA, M4 x L20		2EA		2EA
(Only 32LB55**, 32LB56**,		(Only 42LB55**, 42LB56**,
32LB62**)		42LB62**)

Cable holder		Cinema 3D Glasses
(Depending on model)		The number of 3D glasses may
		differ depending on the model or
		country.
		(Only LB62**)

ASSEMBLING AND PREPARING 13

Separate purchase

Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items.

These devices only work with certain models.

LG Audio Device		AG-F***		AG-F***DP
		Cinema 3D Glasses		Dual play glasses

<![if ! IE]>

<![endif]>ENGLISH

Compatibility	LB56** / LB55**	LB62**
LG Audio device	•	•
AG-F***		•
Cinema 3D Glasses
AG-F***DP		•
Dual play glasses

The model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances or policies.

<![if ! IE]>

<![endif]>ENGLISH

14 ASSEMBLING AND PREPARING

Parts and buttons

(Only LB55**, LB56**-ZE / ZC, LB62**-ZA / ZB)

Screen

Joystick Button

(* This button is located below the TV screen.)

Speakers

Remote control sensor

Power Indicator

(Only LB56**-ZT / ZQ, LB62**-ZE)

Screen

Joystick Button

(* This button is located below the TV screen.)

Speakers

Remote control sensor

Power Indicator

NOTE

yyYou can set the power indicator light to on or off by selecting OPTION in the main menus.

ASSEMBLING AND PREPARING 15

Using the Joystick button

You can simply operate the TV functions, pressing or moving the joystick button up, down, left or right.

Basic Functions

Power On

Power Off

Volume Control

Programmes

Control

When the TV is turned off, place your finger on the joystick button and press it once and release it.

When the TV is turned on, place your finger on the joystick button and press it once for a few seconds and release it.

(However, if the Menu button is on the screen, pressing and holding the joystick button will let you exit the Menu.)

If you place your finger over the joystick button and move it left or right, you can adjust the volume level you want.

If you place your finger over the joystick button and move it up or down, you can scrolls through the saved programmes you want.

NOTE

yyWhen your finger over the joystick button and push it to the up, down, left or right, be careful not to press the joystick button. If you press the joystick button first, you can not adjust the volume level and saved programmes.

Adjusting the Menu

When the TV is turned on, press the joystick button one time.

You can adjust the Menu items(,, ,) moving the joystick button up, down, left or right.

			TV off	Turns the power off.
			Settings	Accesses the main menu.
			Close	Clears on-screen displays and returns to TV viewing.
			Input List	Changes the input source.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

16 ASSEMBLING AND PREPARING

Lifting and moving the TV

Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.

CAUTION

yyAvoid touching the screen at all times, as this may result in damage to the screen.

yyIt is recommended to move the TV in the box or packing material that the TV originally came in.

yyBefore moving or lifting the TV, disconnect the power cord and all cables.

yyWhen holding the TV, the screen should face away from you to avoid damage.

yyWhen transporting the TV, do not expose the TV to jolts or excessive vibration.

yyWhen transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right.

yyDo not apply excessive pressure to cause flexing / bending of frame chassis as it may damage screen.

yyHold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.

yyWhen transporting a large TV, there should be at least 2 people.

yyWhen transporting the TV by hand, hold the TV as shown in the following illustration.

ASSEMBLING AND PREPARING 17

Mounting on a table

1Lift and tilt the TV into its upright position on a table. --Leave a 10 cm (minimum) space from the wall for proper ventilation.

		10 cm
		cm
	10 cm	10
		10 cm

2 Connect the power cord to a wall outlet.

CAUTION

yyDo not place the TV near or on sources of heat, as this may result in fire or other damage.

Securing the TV to a wall

(This feature is not available for all models.)

1Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV.

--If there are bolts inserted at the eye-bolts position, remove the bolts first.

2Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eyebolts on the rear of the TV.

3Connect the eye-bolts and wall brackets tightly with a sturdy rope.

Make sure to keep the rope horizontal with the flat surface.

	CAUTION
yy	that children do not climb on or hang

on the TV.

NOTE

yy platform or cabinet that is strong and large enough to support the TV securely.

yyBrackets, bolts and ropes are not provided. You can obtain additional accessories from your local dealer.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

18 ASSEMBLING AND PREPARING

Mounting on a wall

Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials,

please contact qualified personnel.

LG recommends that wall mounting be performed by a qualified professional installer.

10 cm

10 cm

10 cm

10 cm

Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.

Separate purchase(Wall Mounting Bracket)

	32/39LB56**	42/47/50/55LB56**
Model	32LB55**	42/49LB55**
	32LB62**	42/49/55LB62**
VESA (A x B)	200 x 200	400 x 400
Standard screw	M6	M6
Number of screws	4	4
Wall mount	LSW240B	LSW440B
bracket	MSW240	MSW240
Model	60LB56**
VESA (A x B)	400 x 400
Standard screw	M6
Number of screws	4
Wall mount	LSW440B
bracket

A

B

CAUTION

yyDisconnect the power first, and then move or install the TV. Otherwise electric shock may occur.

yyIf you install the TV on a ceiling or slanted wall, it may fall and result in severe injury.

Use an authorized LG wall mount and contact the local dealer or qualified personnel.

yyDo not over tighten the screws as this may cause damage to the TV and void your warranty.

yyUse the screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.

NOTE

yyUse the screws that are listed on the VESA standard screw specifications.

yyThe wall mount kit includes an installation manual and necessary parts.

yyThe wall mount bracket is not provided. You can obtain additional accessories from your local dealer.

yyThe length of screws may differ depending on the wall mount. Make sure to use the proper length.

yyFor more information, refer to the manual supplied with the wall mount.

NOTE

yyOnly 42LB55**, 42LB56**, 42LB62**

Wall Mount Spacers