OWNER’S MANUAL
LED TV
* LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and retain it for future reference.
LA62** LN57**
LA64**
LA66**
LA69**
LA74**
P/NO : MFL67658604(1303-REV01) |
|
Printed in Korea |
www.lg.com |
A-2 TABLE OF CONTENTS
TABLE OF CONTENTS
A-3 Setting up the TV
A-3 Attaching the stand
A-6 Tidying cables
A-7 MAKING CONNECTIONS
A-7 Antenna connection A-7 Satellite dish connection A-8 HDMI connection
A-8 - ARC (Audio Return Channel) A-9 DVI to HDMI connection
A-10 Component connection A-11 Composite connection A-11 MHL connection
A-12 Audio connection
A-12 - Digital optical audio connection A-13 USB connection
A-14 CI module connection A-15 Headphone connection A-16 Euro Scart connection
language list
English
Türkçe
B-1 SPECIFICATIONS
COMMON
LANGUAGE
COMMON
SETTING UP THE TV A-3
Setting up the TV
Image shown may differ from your TV.
Attaching the stand
LA62**, LA64**, LA66**, LN57**-ZE/ZK
1
4 EA
M4 x 14
Stand Body
Front
Stand Base
2 |
(Only LA62**, LN57**-ZE/ZK) |
|
3 (Only LA62**, LN57**-ZE/ZK)
M4 x 14
4 EA
(Only LA64**, LA66**)
(Only LA64**, LA66**) |
M4 x 14 |
|
|
|
4 EA |
A-4 SETTING UP THE TV
LA69**, LA74** |
|
||
3 |
|||
|
|
||
1 |
|
|
Stand Base
M4 x 20
4EA
2
SETTING UP THE TV A-5
LN57**-ZA
CAUTION
1 |
3EA |
|
|
|
P5 x 25 |
|
Stand Body |
yy When attaching the stand to the TV set, place the screen facing down on a
cushioned table or flat surface to protect the screen from scratches.
yy Make sure that the screws are inserted correctly and fastened securely. (If they are not fastened securely enough, the TV may tilt forward after being installed.)
Do not use too much force and over tighten the screws; otherwise screw may be damaged and not tighten correctly.
Stand Base
2
NOTE
yy Removing the protective film (from the bottom)
(Depending on model)
Protective film is temporarily attached to
prevent the surface of the product from
being damaged during delivery.
Once the TV has been installed, please remove the protective film on the bottom of the unit as shown in the figure.
3
yy Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.
4EA
M4 x 14
A-6 SETTING UP THE TV
Tidying cables |
(Only LN57**-ZA) |
|
|
|
|
|
|
1 Gather and bind the cables with the Cable |
1 |
Gather and bind the cables with the Cable |
Holder. |
|
Holder and the Cable Management. |
Cable Holder |
|
|
|
2 |
Fix the Cable Management firmly to the TV. |
|
(Only LA62**, LA64**, LA66**, LN57**-ZE/ZK)
Cable Holder
Cable Management
(Only LA69**, LA74**)
|
CAUTION |
|
yy Do not move the TV by holding the cable |
|
holders, as the cable holders may break, |
Cable Holder |
and injuries and damage to the TV may |
occur. |
Cable Management
MAKING CONNECTIONS A-7
MAKING CONNECTIONS
Satellite dish connection
(Only satellite models)
This section on MAKING CONNECTIONS mainly uses diagrams for the LA66**models.
Antenna connection
ANTENNA/
CABLE IN
English
Connect the TV to a wall antenna socket with an RF cable (75 Ω).
NOTE
yy Use a signal splitter to use more than 2 TVs. yy If the image quality is poor, install a signal
amplifier properly to improve the image quality.
yy If the image quality is poor with an antenna connected, try to realign the antenna in the correct direction.
yy An antenna cable and converter are not supplied.
yy Supported DTV Audio: MPEG, Dolby Digital, Dolby Digital Plus, HE-AAC
Türkçe
TV’yi RF kablosu (75 Ω) ile duvar anten soketine bağlayın.
NOT
yy İkiden fazla TV’de kullanmak için bir sinyal ayırıcısı kullanın.
yy Görüntü kalitesinin kötü olması durumunda görüntü kalitesini artırmak üzere bir sinyal güçlendiricisi kullanın.
yy Anten bağlıyken görüntü kalitesinin kötü olması durumunda anteni doğru yönde yeniden hizalamayı deneyin.
yy Anten kablosu ve dönüştürücü ürünle birlikte verilmemektedir.
yy Desteklenen DTV Ses: MPEG, Dolby Digital, Dolby Digital Plus, HE-AAC
13/18 V
700 mA Max
LNB
Satellite IN
English
Connect the TV to a satellite dish to a satellite socket with a satellite RF cable (75 Ω).
Türkçe
TV’yi uydu RF kablosu (75 Ω) kullanarak çanak antene ve uydu soketine bağlayın.
A-8 MAKING CONNECTIONS
HDMI connection |
Türkçe |
|
DVD/ Blu-Ray / HD Cable
Box / HD STB / PC
(*Not Provided)
English
Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown. Choose any HDMI input port to connect. It does not matter which port you use.
NOTE
yy It is recommended to use the TV with the HDMI connection for the best image quality.
yy Use the latest High Speed HDMI™ Cable with CEC (Customer Electronics Control) function.
yy High Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher.
yy Supported HDMI Audio format : Dolby
Digital, DTS, PCM (Up to 192 KHz, 32KHz/4 4.1KHz/48KHz/88KHz/96KHz/176KHz/192K Hz)
Harici cihazdan TV’ye dijital video ve ses sinyalleri gönderir. Harici cihaz ile TV’yi HDMI kablosuyla aşağıdaki şekilde gösterildiği gibi bağlayın. Bağlanmak için herhangi bir HDMI giriş bağlantı noktasını seçin. Kullandığınız bağlantı noktası önemli değildir.
NOT
yy En iyi görüntü kalitesi için, TV’nin HDMI bağlantısıyla kullanılması önerilir.
yy CEC (Tüketici Elektronik Kontrolü) fonksiyonlu en son Yüksek Hızlı HDMI™ Kablosunu kullanın.
yy Yüksek Hızlı HDMI™ Kablolarının 1080p ve üzerine kadar HD sinyalini taşıyabildiği test edilmiştir.
yy Desteklenen HDMI Ses biçimi: Dolby Digital, DTS, PCM (En fazla 192 KHz, 32KHz/44.1K Hz/48KHz/88KHz/96KHz/176KHz/192KHz)
ARC (Audio Return Channel)
English
yyAn external audio device that supports SIMPLINK and ARC must be connected using HDMI/DVI IN 1 (ARC) port.
yyWhen connected with a high-speed HDMI cable, the external audio device that supports ARC outputs optical SPDIF without additional optical audio cable and supports the SIMPLINK function.
Türkçe
yyHDMI/DVI IN 1 (ARC) bağlantı noktası kullanılarak SIMPLINK ve ARC’yi destekleyen harici bir ses cihazının bağlanması gerekir. yyARC’yi destekleyen harici ses cihazı, yüksek hızlı bir HDMI kablosuyla bağlandığında ek optik ses kablosu eklemeye gerek kalmadan optik SPDIF çıkışı sağlar ve SIMPLINK fonk-
siyonunu destekler.
MAKING CONNECTIONS A-9
DVI to HDMI connection
WHITE
RED
Türkçe
Harici cihazdan TV’ye dijital video sinyali gönderir. Harici cihaz ile TV’yi DVI-HDMI kablosuyla aşağıdaki şekilde gösterildiği gibi bağlayın. Ses sinyali göndermek için bir ses kablosu bağlayın. Bağlanmak için herhangi bir HDMI giriş bağlantı noktasını seçin. Kullandığınız bağlantı noktası
değildir.
NOT
yy Grafik kartına bağlı olarak, HDMIDVI Kablosu kullanılıyorsa DOS modu çalışmayabilir.
yy HDMI/DVI kablosunu kullanırken yalnızca tek bağlantıya izin verilir.
(*Not Provided)
DVD/ Blu-Ray / HD Cable Box / PC
English
Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown. To transmit an audio signal, connect an audio cable. Choose any HDMI input port to connect. It does not matter which port you use.
NOTE
yy Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use.
yy When using the HDMI/DVI cable, only Single link is supported.
A-10 MAKING CONNECTIONS
Component connection |
Türkçe |
|
Harici cihazdan TV’ye analog video ve ses sinyalleri gönderir. Harici cihaz ile TV’yi komponent kablosuyla aşağıdaki şekilde gösterildiği gibi bağlayın.
NOT
yy Kabloların yanlış takılması, görüntünün siyah beyaz veya bozuk renklerle gösterilmesine neden olabilir.
(*Not
Provided)
<![endif]>RED
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
<![if ! IE]> <![endif]>WHITE |
<![if ! IE]> <![endif]>RED |
<![if ! IE]> <![endif]>BLUE |
<![if ! IE]> <![endif]>GREEN |
DVD / Blu-Ray / HD Cable Box
English
Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown.
NOTE
yy If cables are not installed correctly, it could cause this image to display in black and white or with distorted colours.
MAKING CONNECTIONS A-11
Composite connection |
MHL connection |
<![if ! IE]> <![endif]>IN |
<![if ! IE]> <![endif]>3(MHL) |
<![if ! IE]> <![endif]>/DVI |
|
2
<![if ! IE]> <![endif]>RED |
<![if ! IE]> <![endif]>WHITE |
|
<![if ! IE]> <![endif]>YELLOW |
(*Not Provided) |
|
|
|
|
<![if ! IE]> <![endif]>RED |
<![if ! IE]> <![endif]>WHITE |
<![if ! IE]> <![endif]>YELLOW |
L
DVD/ Blu-Ray / HD Cable Box / VCR
English
Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown.
Türkçe
Harici cihazdan TV’ye analog video ve ses sinyalleri gönderir. Harici cihaz ile TV’yi kompozit kablosuyla aşağıdaki şekilde gösterildiği gibi bağlayın.
MHL passive cable (*Not Provided)
Mobile phone
English
Mobile High-definition Link (MHL) is an interface for transmitting digital audiovisual signals from mobile phones to television sets.
NOTE
yyConnect the mobile phone to the HDMI/DVI IN 3 (MHL) port to view the phone screen on the TV.
yyThe MHL passive cable is needed to connect the TV and a mobile phone.
yyThis only works for the MHL-enabled phone. yySome applications can be operated by the
remote control.
yyFor some mobile phones supporting MHL, you can control with the magic remote control.
yy Remove the MHL passive cable from the TV when:
--the MHL function is disabled --your mobile device is fully charged in
standby mode
A-12 MAKING CONNECTIONS
Türkçe
Mobil Yüksek Tanımlı Bağlantı (MHL) dijital görsel işitsel sinyalleri cep telefonlarından televizyon setlerine iletmek için kullanılan bir arabirimdir.
NOT
yyTV’de telefon ekranını görüntülemek için cep telefonunu HDMI/DVI IN 3 (MHL) bağlantı noktasına bağlayın.
yyTV ile cep telefonunu birbirine bağlamak için
MHL pasif kablo gereklidir.
yyBu yalnızca MHL etkin telefonlarda çalışır. yyBazı uygulamalar uzaktan kumanda ile
çalıştırılabilir.
yyMHL desteği olan bazı cep telefonlarını sihirli uzaktan kumanda olarak kullanabilirsiniz.
yy MHL pasif kablosunu TV’den çıkarın: --MHL işlevi devre dışı bırakıldığında --Mobil cihazınız bekleme modunda tamamen
şarj edildiğinde
Audio connection
(*Not Provided)
Digital Audio System / Sound Bar(Only 42/47LA669*)
English
You may use an optional external audio system instead of the built-in speaker.
Digital optical audio connection
Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown.
NOTE
yy Do not look into the optical output port. Looking at the laser beam may damage your vision.
yy Audio with ACP (Audio Copy Protection) function may block digital audio output.
Türkçe
Dahili hoparlör yerine isteğe bağlı bir harici ses sistemi kullanabilirsiniz.
Dijital optik ses bağlantısı
TV’den harici cihaza dijital ses sinyali gönderir. Harici cihaz ile TV’yi optik ses kablosuyla aşağıdaki şekilde gösterildiği gibi bağlayın.
NOT
yy Optik çıkış bağlantı noktasına doğru bakmayın. Lazer ışınına bakmak gözlerinize zarar verebilir.
yy ACP (Ses Kopyalama Koruması) özelliğine sahip sesler dijital ses çıkışını engelleyebilir.
MAKING CONNECTIONS A-13
USB connection
<![if ! IE]> <![endif]>3 |
HUB |
|
|
<![if ! IE]> <![endif]>IN 2 |
|
|
USB |
HDD
(*Not Provided)
English
Connect a USB storage device such as a USB flash memory, external hard drive, or a USB memory card reader to the TV and access the
Smart Share menu to use various multimedia files.
NOTE
yy Some USB Hubs may not work. If a USB device connected using a USB Hub is not detected, connect it to the USB port on the TV directly.
yy Connect the external power source if your USB is needed.
Türkçe
Çeşitli multimedya dosyalarını kullanmak için TV’ye USB flaş bellek, harici sabit disk ya da USB bellek kartı okuyucu gibi bir USB depolama aygıtı bağlayın ve Smart Share menüsüne gidin.
NOT
yy Bazı USB Hubları çalışmayabilir. USB Hubı ile bağlanan bir USB aygıtı çalışmazsa, doğrudan TV üzerindeki USB bağlantı noktasına bağlayın.
yy USB kullanmanız gerekiyorsa harici güç kaynağını bağlayın.
A-14 MAKING CONNECTIONS
CI module connection
<![if ! IE]><![endif]>▼
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
<![if ! IE]> <![endif]>▼ |
(*Not Provided) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
English
View the encrypted (pay) services in digital TV mode. This feature is not available in all countries.
NOTE
yy Check if the CI module is inserted into the PCMCIA card slot in the right direction. If the module is not inserted properly, this can cause damage to the TV and the PCMCIA card slot.
yy If the TV does not display any video and audio when CI+ CAM is connected, please contact to the Terrestrial/Cable/Satellite
Service Operator.
Türkçe
Dijital TV modunda şifreli (ücretli) servisleri görüntüler. Bu özellik her ülkede mevcut değildir.
NOT
yy CI modülünün PCMCIA kart yuvasına doğru yönde takıldığından emin olun. Modül doğru takılmadığında, TV’nin ve PCMCIA kart yuvasının zarar görmesine neden olabilir.
yy CI+ CAM bağlandığında TV’de herhangi bir görüntü ve ses yoksa, lütfen Karasal/Kablo/ Uydu Servis Operatörü ile iletişime geçin.
MAKING CONNECTIONS A-15
Headphone connection |
Türkçe |
|
H/P OUT |
(*Not Provided) |
|
English
Transmits the headphone signal from the TV to an external device. Connect the external device and the TV with the headphone as shown.
NOTE
yyAUDIO menu items are disabled when connecting a headphone.
yyWhen changing AV MODE with a headphone connected, the change is applied to video but not to audio.(Depending on model)
yyOptical Digital Audio Out is not available when connecting a headphone.
yyHeadphone impedance: 16 Ω
yyMax audio output of headphone: 9 mW to 15 mW
yyHeadphone jack size: 0.35 cm
TV’den harici bir cihaza kulaklık sinyali gönderir. Harici cihaz ile TV’yi kulaklıkla aşağıdaki şekilde gösterildiği gibi bağlayın.
NOT
yyKulaklık bağlandığında SES menüsü öğeleri devre dışı bırakılır.
yyKulaklık bağlıyken AV MODU değiştirilirse, değişiklik videoya uygulanır ancak sese uygulanmaz.(Modele bağlı olarak)
yyOptik Dijital Ses Çıkışı kulaklık takılı olduğunda kullanılamaz.
yyKulaklık empedansı: 16 Ω
yyKulaklığın maks. ses çıkışı: 9 mW - 15 mW yyKulaklık jakı boyutu: 0,35 cm
A-16 MAKING CONNECTIONS
Euro Scart connection |
Türkçe |
|
(*Not Provided)
English
Transmits the video and audio signals from an external device to the TV set. Connect the external device and the TV set with the euro scart cable as shown.
Output |
AV1 |
Type |
|
Current |
(TV Out1) |
input mode |
|
Digital TV |
Digital TV |
Analogue TV, AV |
|
Component |
Analogue TV |
HDMI |
|
Harici cihazdan TV setine video ve ses sinyalleri gönderir. Harici cihaz ve TV setini aşağıdaki şekilde gösterildiği gibi Euro Scart kablosuyla bağlayın.
|
Çıkış tipi |
AV1 |
Geçerli |
|
|
|
(TV Çıkışı1) |
|
giriş modu |
|
|
Dijital TV |
|
Dijital TV |
Analog TV, AV |
|
|
Komponent |
|
Analog TV |
HDMI |
|
|
1TV Çıkışı: Analog TV veya Dijital TV sinyal çıkışı sağlar.
NOT
yy Kullanılacak Euro Scart kablosu sinyal korumalı olmalıdır.
yy 3D görüntü modunda dijital TV izlerken, yalnızca 2D çıkış sinyallerinin SCART kablosu aracılığıyla çıkışı sağlanabilir. (Yalnızca 3D modeller)
1TV Out : Outputs Analogue TV or Digital TV signals.
NOTE
yy Any Euro scart cable used must be signal shielded.
yy When watching digital TV in 3D imaging mode, only 2D out signals can be output through the SCART cable. (Only 3D models)
MAKING CONNECTIONS A-17
English |
Türkçe |
Connect various external devices to the TV and switch input modes to select an external
device. For more information of external device’s connection, refer to the manual provided with each device.
Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.
NOTE
yy The external device connection may differ from the model.
yy Connect external devices to the TV regardless of the order of the TV port.
yy If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information of recording, refer to the manual provided with the connected device.
yy Refer to the external equipment’s manual for operating instructions.
yy If you connect a gaming device to the TV, use the cable supplied with the gaming device.
yy In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear.
yy In PC mode, some resolution settings may not work properly depending on the graphics card.
TV’ye çeşitli harici cihazlar bağlayın ve bir harici cihaz seçmek için giriş modlarına geçin. Harici cihaz bağlantısı hakkında daha fazla bilgi için cihazlarla birlikte verilen kılavuza bakın. Kullanılabilir harici cihazlar şunlardır: HD alıcılar, DVD oynatıcılar, VCR cihazları, ses sistemleri, USB depolama aygıtları, PC, oyun cihazları ve diğer harici cihazlar.
NOT
yy Harici cihaz bağlantısı modele göre değişiklik gösterebilir.
yy Harici cihazları TV’ye, TV bağlantı noktalarını dikkate almaksızın bağlayın.
yy DVD kayıt cihazına ya da VCR cihazına bir TV programı kaydederken TV sinyal giriş kablosunun DVD kayıt cihazı ya da VCR üzerinden TV’ye bağlandığından emin olun. Kayıt hakkında daha fazla bilgi için, bağlanan cihazla birlikte verilen kılavuza bakın.
yy Kullanım talimatları için harici cihazın kullanım kılavuzuna başvurun.
yy TV’ye bir oyun cihazı bağlarsanız, oyun cihazıyla birlikte verilen kabloyu kullanın. yy PC modunda, çözünürlük, dikey desen, kontrast veya parlaklığa bağlı parazit
görülebilir. Parazit varsa PC çıkışını başka bir çözünürlüğe ayarlayın, yenileme hızını değiştirin veya net bir görüntü elde edene kadar RESİM menüsünden parlaklık ve kontrast ayarlarını değiştirin.
yy PC modunda bazı çözünürlük ayarları grafik kartına bağlı olarak çalışmayabilir.
OWNER’S MANUAL
LED TV
* LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and retain it for future reference.
www.lg.com
<![endif]>ENGLISH
2 TABLE OF CONTENTS
TABLE OF CONTENTS
3 Licenses
3OPEN SOURCE SOFTWARE NOTICE
4Safety Instructions
10 - Viewing 3D Imaging (Only 3D models)
12 Installation Procedure
12 ASSEMBLING AND PREPARING
12 Unpacking
16Separate purchase
17Parts and buttons
18Lifting and moving the TV
19Mounting on a table
21 Mounting on a wall
23 REMOTE CONTROL
25Magic Remote Control Functions
26Registering Magic Remote Control
26How to use Magic Remote Control
26Precautions to Take when Using the Magic Remote Control
27Using the User guide
28MAINTENANCE
28 Cleaning your TV
28 - Screen, frame, cabinet and stand
28 - Power cord
WARNING
yy If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.
28TROUBLESHOOTING
29EXTERNAL CONTROL DEVICE SETUP
29 SPECIFICATIONS
CAUTION
yy If you ignore the caution message, you may be slightly injured or the product may be damaged.
NOTE
yy The note helps you understand and use the product safely. Please read the note carefully before using the product.
LICENSES / OPEN SOURCE SOFTWARE NOTICE 3
Licenses
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays
DivX video. Visit divx.com for more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod. divx.com for more information on how to complete your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”
“DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274”
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol & DTS and the Symbol together are registered trademarks & DTS 2.0+Digital Out is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com .
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the product.
<![endif]>ENGLISH
<![endif]>ENGLISH
4 SAFETY INSTRUCTIONS
SAFETy INSTRUCTIONS
Please read these safety precautions carefully before using the product.
WARNING
y Do not place the TV and/or remote control in the following environments:
- A location exposed to direct sunlight
- An area with high humidity such as a bathroom
-Near any heat source such as stoves and other devices that produce heat
-Near kitchen counters or humidifiers where they can easily be exposed to steam or oil
-An area exposed to rain or wind
-Near containers of water such as vases
Otherwise, this may result in fire, electric shock, malfunction or product deformation.
y Do not place the product where it might be exposed to dust. This may cause a fire hazard.
y Mains Plug is the TV connecting/disconnecting device to AC mains electric supply. This plug must remain readily attached and operable when TV is in use.
y Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off.
You may be electrocuted due to excess moisture.
y Make sure to connect Mains cable to compliant AC mains socket with Grounded earth pin. (Except for devices which are not grounded on earth.) Otherwise possibility you may be electrocuted or injured.
y Insert power cable plug completely into wall socket otherwise if not secured completely into socket, fire ignition may break out.
y Ensure the power cord does not come into contact with hot objects such as a heater.
This may cause a fire or an electric shock hazard.
y Do not place a heavy object, or the product itself, on power cables. Otherwise, this may result in fire or electric shock.
y Bend antenna cable between inside and outside building to prevent rain from flowing in.
This may cause water damaged inside the Product and could give an electric shock.
y When mounting TV onto wall make sure to neatly install and isolate cabling from rear of TV as to not create possibility of electric shock /fire hazard.
Desiccant
SAFETY INSTRUCTIONS 5
yDo not plug too many electrical devices into a single multiple electrical outlet. Otherwise, this may result in fire due to over-heating.
yDo not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product.
yKeep the anti-moisture packing material or vinyl packing out of the reach of children.
Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
yDo not let your children climb or cling onto the TV.
Otherwise, the TV may fall over, which may cause serious injury.
yDispose of used batteries carefully to ensure that a small child does not consume them.
Please seek DoctorMedical Attention immediately if child consumes batteries.
yDo not insert any metal objects/conductors (like a metal chopstick/cutlery/ screwdriver) between power cable plug and input Wall Socket while it is connected to the input terminal on the wall. Additionally, do not touch the power cable right after plugging into the wall input terminal. You may be electrocuted.
(Depending on model)
yDo not put or store inflammable substances near the product.
There is a danger of combustion/explosion or fire due to careless handling of the inflammable substances.
yDo not drop metallic objects such as coins, hair pins, chopsticks or wire into the product, or inflammable objects such as paper and matches. Children must pay particular attention.
Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the power cord and contact the service centre.
yDo not spray water on the product or scrub with an inflammable substance (thinner or benzene). Fire or electric shock accident can occur.
yDo not allow any impact, shock or any objects to fall into the unit, and do not drop anything onto the screen.
You may be injured or the product can be damaged.
yNever touch this product or antenna during a thunder or lighting storm. You may be electrocuted.
yNever touch the wall outlet when there is leakage of gas, open the windows and ventilate.
It may cause a fire or a burn by a spark.
<![endif]>ENGLISH
<![endif]>ENGLISH
6 SAFETY INSTRUCTIONS
yyDo not disassemble, repair or modify the product at your own discretion. Fire or electric shock accident can occur.
Contact the service centre for check, calibration or repair.
yyIf any of the following occur, unplug the product immediately and contact your local service centre.
--The product has been impacted by shock --The product has been damaged --Foreign objects have entered the product
--The product produced smoke or a strange smell This may result in fire or electric shock.
yyUnplug the TV from AC mains wall socket if you do not intend to use the TV for a long period of time.
Accumulated dust can cause fire hazard and insulation deterioration can cause electric leakage/shock/fire.
yyApparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
SAFETY INSTRUCTIONS 7
CAUTION
yyInstall the product where no radio wave occurs.
yyThere should be enough distance between an outside antenna and power lines to keep the former from touching the latter even when the antenna falls.
This may cause an electric shock.
yyDo not install the product on places such as unstable shelves or inclined surfaces. Also avoid places where there is vibration or where the product cannot be fully supported.
Otherwise, the product may fall or flip over, which may cause injury or damage to the product.
yyIf you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury.
yyIf you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop.
yyOnly use the attachments / accessories specified by the manufacturer.
yyWhen installing the antenna, consult with a qualified service technician. If not installed by a qualified technician, this may create a fire hazard or an electric shock hazard.
yyWe recommend that you maintain a distance of at least 2 to 7 times the diagonal screen size when watching TV.
If you watch TV for a long period of time, this may cause blurred vision.
yyOnly use the specified type of battery.
This could cause damage to the remote control.
yyDo not mix new batteries with old batteries.
This may cause the batteries to overheat and leak.
yyBatteries should not be exposed to excessive heat.eg keep away from direct Sunlight , open fireplace and electric heaters .
yyDo not place non-rechargeable batteries in charging device.
yyMake sure there are no objects between the remote control and its sensor.
yySignal from Remote Control can be interrupted due to external/internal lighting eg Sunlight, fluorescent lighting.
If this occurs turn off lighting or darken viewing area.
yyWhen connecting external devices such as video game consoles, make sure the connecting cables are long enough.
Otherwise, the product may fall over, which may cause injury or damage the product.
<![endif]>ENGLISH
<![endif]>ENGLISH
8 SAFETY INSTRUCTIONS
yyDo not turn the product On/Off by plugging-in or unplugging the power plug to the wall outlet. (Do not use the power plug for switch.)
It may cause mechanical failure or could give an electric shock.
yyPlease follow the installation instructions below to prevent the product from overheating.
--The distance between the product and the wall should be more than 10 cm. --Do not install the product in a place with no ventilation (e.g., on a bookshelf or in
a cupboard).
--Do not install the product on a carpet or cushion.
--Make sure the air vent is not blocked by a tablecloth or curtain. Otherwise, this may result in fire.
yyTake care not to touch the ventilation openings when watching the TV for long periods as the ventilation openings may become hot. This does not affect the operation or performance of the product.
yyPeriodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.
yyPrevent dust collecting on the power plug pins or outlet. This may cause a fire hazard.
yyProtect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.
yyDo not press strongly upon the panel with a hand or sharp object such as nail, pencil or pen, or make a scratch on it, as it may cause damage to screen.
yyAvoid touching the screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary or permanent distortion/damage to screen.
yyWhen cleaning the product and its components, unplug the power first and wipe it with a soft cloth. Applying excessive force may cause scratches or discolouration. Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the product and its panel.
Otherwise, this may result in fire, electric shock or product damage (deformation, corrosion or breakage).
yyAs long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by SWITCH.
yyWhen unplugging the cable, grab the plug and unplug it, by pulling at the plug. Don’t pull at the cord to unplug the power cord from the power board, as this could be hazardous.
yyWhen moving the product, make sure you turn the power off first. Then, unplug the power cables, antenna cables and all connecting cables.
The TV set or power cord may be damaged, which may create a fire hazard or cause electric shock.
SAFETY INSTRUCTIONS 9
yyWhen moving or unpacking the product, work in pairs because the product is heavy.
Otherwise, this may result in injury.
yyContact the service centre once a year to clean the internal parts of the product. Accumulated dust can cause mechanical failure.
yyRefer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
yyIf the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with product.
yyThe panel is a high technology display product with resolution of two million to six million pixels. You may see tiny black dots and/or brightly coloured dots (red, blue or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and does not affect the performance and reliability of the product.
This phenomenon also occurs in third-party products and is not subject to exchange or refund.
yyYou may find different brightness and color of the panel depending on your viewing position(left/right/top/down).
This phenomenon occurs due to the characteristic of the panel. It is not related with the product performance, and it is not malfunction.
yyDisplaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video game) for a prolonged time may cause damage to the screen, resulting in retention of the image, which is known as image sticking. The warranty does not cover the product for image sticking. Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours for LCD, 1 or more hours for Plasma).
Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders of the panel.
This phenomenon also occurs in third-party products and is not subject to exchange or refund.
yyGenerated Sound
“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to tempera-ture and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product.
This generated sound does not affect the performance and reliability of the product.
<![endif]>ENGLISH
<![endif]>ENGLISH
10 SAFETY INSTRUCTIONS
Viewing 3D Imaging (Only 3D models)
WARNING
Viewing Environment
yy Viewing Time
-- When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain.
Those that have a photosensitive seizure or chronic illness
yy Some users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular pattern from 3D contents.
yy Do not watch 3D videos if you feel nausea, are pregnant and/ or have a chronic illness such as epilepsy, cardiac disorder, or blood pressure disease, etc.
yy 3D Contents are not recommended to those who suffer from stereo blindness or stereo anomaly. Double images or discomfort in viewing may be experienced.
yy If you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism, you may have trouble sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than the average adult.
yy If your eyesight varies between your right and left eye, revise your eyesight prior to watching 3D contents.
Symptoms which require discontinuation or refraining from watching 3D contents
yy Do not watch 3D contents when you feel fatigue from lack of sleep, overwork or drinking.
yy When these symptoms are experienced, stop using/watching 3D contents and get enough rest until the symptom subsides.
-- Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain, dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue.