Leica M844 F40 User Manual

Page 1
Leica M844 F40
Redefining the premium class in Ophthalmic Surgery
Living up to Life
Page 2
Leica
Page 3
M844 F40
See more of what you need to see.
Combining a higher level of optical quality than ever before with the best technologies of today’s surgical microscopes, the Leica M844 truly redefines the premium class of oph­thalmic surgical microscopes.
The Leica M844 is the microscope
you must see!
3
Page 4
Leica Design by Christophe Apothéloz
4
Page 5
Uniquely Leica
Crisp and sharp!
Leica’s APO OptiChromeTMM844 Optics provide the highest resolution to see even the smallest anato­mical details.
Same perfect view, same perfect light!
Leica’s QuadZoomTMgives both the surgeon and assistant 100% of the illumination and the same magnification.
Safety forthe patient,fatigue-free viewing for the surgeon!
Leica’s exclusive direct illumination system offers the best clarity, contrast and colour at safe low-light levels.
5
Page 6
M
APO OptiChrome
T
Changing microsurgery forever
Leica introduces the original APO OptiChrome™
Providing an extraordinary degree of light transmission for maxi­mum detail recognition is critical for all types of ophthalmic microsurgery. For the posterior segment surgeon, where avail­ability of light is limited, a high degree of light transmission is essential. For refractive and anterior segment surgery, low light is always better for the patient.
Expect only the highest standards in optics from the Leica M844
• Sharper and crisper image
• Higher light transmission
• Natural colour fidelity
• Outstanding depth of focus
• Higher contrast
QuadZoom
TM
Uniquely Leica
6
Efficient illumination
By utilising four separate beam paths through the same common
TM
zoom system, the Leica QuadZoom OptiChromeTMstereovision and 100% illumination for both the main surgeon and the assistant.
2 × 2 views always synchronized
By putting both pairs of beam paths through one common zoom system, as the surgeon changes magnification, the assistant’s view is perfectly synchronized with the surgeon’s view.
delivers 100% APO
Page 7
M
OttoFlex
T
II See more with less light
See more with less light
Low light ensures fatigue-free viewing and patient safety
With two bulbs and two prisms, the Leica M844 creates true three-dimensional illumination. Using a focused, direct illumina­tion system instead of fiber optics, the Leica M844 takes a ray of light and projects a crisp, sharp and homogeneous image even at very low light levels. Proven for over 25 years, this combination of direct halogen illumination and highly efficient optical transmis­sion ensures patient safety and fatigue-free viewing for the sur­geon.
See things in a different light
TM
OttoFlex a brilliant red reflex even in low light conditions and enhances the view’s contrast. Difficult anatomical conditions, such as small pupils or very advanced cataracts are more easily visualised through this unique system. Continuously adjustable from 4mm to 35mm diameter, OttoFlexTMII places the brightness where the surgeon needs it most.
II, an integrated independent illumination system, gives
OttoFlex II
Max
Field of main illumination
OttoFlex II
Min
Field of main illumination
7
Page 8
Take control
Intuitive control unit
The touch panel offers intuitive control of all the Leica M844’s functions. The control unit’s operation is simple and straight­forward with many innovative features.
Everyone is an individual
Customised start settings, such as illumination and magnification levels, are easily programmed into the control unit for up to 30 dif­ferent users. By having a surgeon’s individual settings available at the touch of a button, the microscope is instantly ready for the next procedure and/or surgeon and the workflow of the surgical team is faster and more efficient.
Leica Two-in-One display control unit mode (above) and video mode (below)
TM
StepCycle
Different levels of light, focus and zoom can optimize each phase of surgery. Making these adjustments today takes surgeons’ pre­cious time. The automatic StepCycleTMfunction enables the sur­geon to program predefined settings that are used throughout typical surgical procedures. After simple programming, a touch of a button on the foot pedal will activate the microscope’s prede­fined settings, step by step, during the procedure.
Real-time video
With one touch of a button the control unit’s display becomes a general use, real-time video monitor, which allows an immediate and convenient view of the current surgical procedure for the operating room staff. For general video viewing there is no need for an extra video cart.
for greater efficiency
8
Page 9
Easy to use from start to finish
Leica F40 space saving stand with extended net reach
The Leica M844 F40 has the smallest footprint and the longest net reach of any ophthalmic surgical microscope on the market. Due to this design, the microscope is easy to position anywhere around the operating table. Four large, fully pivoting casters and an easy to grasp handlebar make the microscope effortless to transport into and out of position.
Positioning in the Operating Room
The extra long reach of the Leica M844 F40
allows flexible positioning, even in
small rooms with many pieces of
equipment. Whether on the side of the
patient or over the surgeon’s shoulder,
the M844 F40 leaves a lot of space
around the operating table.
Auto Reset and it’s ready to go
When the surgeon pushes the swingarm up after each proce­dure, all the microscope functions automatically reset and the microscope is ready for the next case. A real time saver for the operating room staff and peace of mind for the surgeon.
Focus Lock – for quick movement in and out of the operative site
Focus Lock allows the surgeon to move the microscope in and out of position laterally. With the microscope staying on the same focus plane, the surgeon does not have to waste precious time refocusing to continue his procedure.
9
Page 10
Side-to-side change
Easy side-to-side quick change for the assistant
Changing the assistant’s position from one side to the other can be done quickly and easily without removing any parts. Simply lift the main surgeon’s binoculars and rotate the assistant’s bridge. No parts to drop or damage!
The UltraLowTMII for ideal eyepiece-to-field distance
The UltraLowTMII binocular eyepiece tubes drop lower than con­ventional binoculars, which compensates for stacking auxiliary accessories on the optics, such as inverters or laser shutters. The surgeon now works in comfort.
ErgonOptics™ for individual comfort and concentration
Every surgery requires the highest level of concentration from the surgeon and his or her surgical team. The physical comfort of the surgeon is critical to this concentration. Leica provides a large selection of binoculars and three different objective lens types to meet each individual surgeon’s physical requirements. No other microscope system offers this range of surgeon and assistant binoculars and objective lenses.
Eyepiece to field distance ”XL”
Binocular Tube
Perfect ergonomics in every situation.
10
Eyepiece to field distance ”S”
Page 11
Widest range of ergonomics
to ensure comfort
Independent choice of wide-angle observation accessories
The Leica M844 is designed to accept the integration of wide­angle observation systems or stereo image inverters. In addition, when integrating the Oculus SDI/BIOM system, the surgeon can control its functions through the Leica M844’s 16-function foot pedal therefore the system can be fully controlled by a single foot pedal instead of two.
Additional microscope functions at your fingertips
All-brake release and new Focus Lock multi-function are conve­niently located on the rotatable handles. If desired, additional functions can be programmed to meet a wide variety of individual surgeon’s preferences.
Leica M844 controlling Oculus SDI/BIOM system
Rotatable handles
Wide choice of foot pedals
Leica offers three foot pedal styles to meet the needs of all users. XY, zoom, focus and illumination can be controlled from either the 12-function cross or 12-function long pedals. The 16-function cross pedal gives the user four additional options for individual tasks, such as inverter usage, StepCycleTMor room light function.
Wide selection of foot pedals to fulfill any ergonomic need
11
Page 12
Flexibility for individual needs
Leica Zoom Video Adapter on integrated video port
Video port now stays in place
The video port is now integrated into the back of the optics, which means the video camera is always correctly configured and ready to use. The need to switch the video camera from side to side is no longer necessary. A real convenience for the operating room staff. And, having a dedicated video port protects the video adapter and camera from possible damage.
Leica Zoom Video Adapter
The Leica Zoom Video Adapter has a 3× optical zoom and sterile fine focus adjustment. Individual magnification adjustment of the video image is independent of the microscope zoom, which gives the surgeon full freedom to adjust the monitor image for the surgi­cal team without affecting the surgeon’s view.
Leica precision slit lamp
Leica precision operating slit lamp
The Leica surgical slit lamp, with world-renowned Swiss preci­sion, provides full slit functions. The slit beam is adjustable in width and length and can be scanned over the cornea +/-23° from any position via the foot pedal. A retractable blue filter and inte­grated quick change lamp add to its functionality.
Laser adaptability
Most commercially available laser shutters and laser filters can be easily integrated with the Leica M844 system.
12
Page 13
Training for the future
QuadZoom™ – The ultimate view for everyone
Proper surgical training requires everyone to see the same view. The Leica M844 optical system delivers the same magnification and stereo view simultaneously for both the teacher and the stu­dent. A focus override knob on the assistant bridge allows indi­vidual fine-tuning separately from the main surgeon.
Two-in-One control unit and video screen
The Leica M844 is equipped with a unique control unit that can be switched to a general use, real-time video monitor during surgery. With camera, camera control unit, and monitor all mounted on the Leica F40 floor stand, there is no need for a sepa­rate video cart. The entire surgical team can have the benefit of video for every case. If there is a need for extremely high quality documentation, the staff may choose to connect an additional video monitor to the system.
Leica Two-in-One display control unit in video mode
Leica M844 with double wing assistant bridge
Double wing = three stereo observers
The unique Leica double wing assistant bridge enables the teacher to have two students in full stereo view simultaneously at the same magnification. With the newly integrated video display, all three along with the operating room staff and additional stu­dents can observe and learn via the video monitor.
Documentation for education
All the latest documentation options are available with the Leica M844. The Leica MDRS4 digital recording system, as well as many other commercially available digital video systems can be interfaced. Even classic 35mm photography can still be done with the Leica M844. All this to ensure ideal documentation capabilities for training the surgical teams of tomorrow.
13
Page 14
Electrical data
Power supply 90–265VAC, 50/60Hz
ower consumption 400 VA
P Classification Class 1 Type Type B
Microscope
Magnification changer APO-Zoom 6:1, motorized, with 4 separate beam paths Magnification 3.5× – 21× (WD 175mm, 10× eyepieces) Optic APO-chromatic corrected optics Field diameter 7mm – 80mm Working distance 175mm, 200mm and 225mm Focus range 54mm, motorized, with automatic reset Eyepieces Wide field eyepieces for eyeglass wearers (8.33×, 10×, 12.5×)
Dioptric setting +/–5 with adjustable eye cup
Objectives Leica OptiChrome™ , WD 175mm, APO
Leica OptiChrome™ , WD 200mm, APO Leica OptiChrome™ , WD 225mm, APO, (WD = working distance)
Illumination
Quick-change lamp mount With two 12V / 50W halogen lamps Filters IR-barrier filter, UV-barrier filter, two built-in filter holders for optional filters
Stand
Type Floor stand with 4 electromagnetic brakes
Alternatives: Ceiling Mount Leica M844 C40 or Telescope Mount Leica M844 CT40 Balancing Continuously adjustable gas spring Maximum load 12.2kg accessories to the microscope Maximum reach 1492mm Vertical range 846mm Minimum transport height 1949mm Weight without microscope Approx. 330kg XY-unit Motorized, movement range 50 × 50mm, with automatic reset Tilt mechanism Motorized, +15°/–50° Hand switch/Foot pedals 16- or 12-function foot pedal with controls arranged longitudinally or transversely
12-function hand switch Control unit Two-in-one display, control and video display in one. The latest electronic control for the continuous
monitoring of all motor functions and the light intensity. Data shown by means of LCD, with adjustable contrast
and brightness. Operation by modern touch-panel control. ISUS
TM
Intelligent SetUp System, menu selection based on unique software for user-specific configuration, with built-in electronic auto-diagnosis and user support. Open architecture for future software developments.
14
Page 15
Technical Data
Leica M844 F40
Accessories
° assistant attachment 100% Stereopsis at same magnification, including documentation interface, rotatable from side to side
0
(temporal approach), built-in fine focusing, rotatable ring for binocular tube
Double wing For three observers simultaneously
V/Photo Leica 2D video systems, Leica MDRS4 digital recording system, Leica Zoom Video Adapter f = 35–100mm
T
Photo/TV Dual-attachment, f = 60/85/107mm for TV, f = 250/350mm for 35mm camera, TV tube f = 107mm
Phototube f = 250/350mm Wide-angle observation BIOM, EIBOS Inverters AVI, SDI, OIVSL, ROLS Laser Can be fitted, adapters available from laser suppliers Slit lamp Leica, motorized travel +/–23°, Slit width 0.01..15mm, length 3..15mm, Rotatable 180°, quick lamp-changer Asepsis Sterilizable components for all drive knobs, commercially available drapes
Conformity
Medical devices directive 93/42/EEC Classification: Class I, in compliance with appendix IX, rule 1, with reference to rules 12 of the directive.
Medical electrical equipment, Part 1: General requirements for safety IEC 60601-1; EN 60601-1; UL60601-1; CAN/CSA-C22.2 NO. 601.1-M90
• Electromagnetic compatibility IEC 60601-1-2; EN 60601-1-2
The Surgical Division, within Leica Microsystems (Schweiz) AG, has the management system certificate for the international standards ISO 9001:2000 / ISO 13485:2003 and ISO 14001:2004 relating to quality management, quality assurance and environmental management.
15
Page 16
www.leica-microsystems.com
Leica Microsystems operates globally in four divisions, w
here we rank with the market leaders.
Life Science Division
T
he LeicaMicrosystems Life Science Division supports the imaging needs of the scientific community with advanced innovation and technical expertise for the visualization, measurement, and analysis of microstructures.Ourstrong focus on understanding scientific applications puts Leica Microsystems’ customers at the leading edge of science.
Industry Division
The Leica Microsystems Industry Division’s focus is to support customers’ pursuit ofthe highest quality end result. Leica Microsystems provide the best and most innovative imaging systems to see, measure, and analyze the micro­structures in routine and research industrial applications, materials science, quality control, forensic science inves­tigation, and educational applications.
Biosystems Division
The Leica Microsystems Biosystems Division brings his­topathology labs and researchers the highest-quality, most comprehensive product range. From patient to pa­thologist, the range includes the ideal product for each histology step and high-productivity workflow solutions for the entire lab. With complete histology systems fea­turing innovative automation and Novocastra™ reagents, Leica Microsystems creates better patient care through rapid turnaround, diagnostic confidence, and close cus­tomer collaboration.
Surgical Division
The Leica Microsystems Surgical Division’s focus is to partner with and support surgeons and their care of pa­tients with the highest-quality, most innovative surgical microscope technology today and into the future.
“With the user, for the user” Leica Microsystems
The statement by Ernst Leitz in 1907, “with the user, for the user,” describes the fruitful collaboration with end users and driving force of innovation at Leica Microsystems. We have developed five brand values to live up to this tradition: Pioneering, High-end Quality, Team Spirit, Dedication to Science, and Continuous Improvement. For us, living up to these values means: Living up to Life.
Active worldwide
Australia: North Ryde Tel. +61 2 8870 3500 Fax +61 2 9878 1055
Austria: Vienna Tel. +43 1 486 80 50 0 Fax +43 1 486 80 50 30
Belgium: Groot Bijgaarden Tel. +32 2 790 98 50 Fax +32 2 790 98 68
Canada: Richmond Hill/Ontario Tel. +1 905 762 2000 Fax +1 905 762 8937
Denmark: Herlev Tel. +45 4454 0101 Fax +45 4454 0111
France: Nanterre Cedex Tel. +33 811 000 664 Fax +33 1 56 05 23 23
Germany: Wetzlar Tel. +49 64 41 29 40 00 Fax +49 64 41 29 41 55
Italy: Milan Tel. +39 02 574 861 Fax +39 02 574 03392
Japan: Tokyo Tel. +81 3 5421 2800 Fax +81 3 5421 2896
Korea: Seoul Tel. +82 2 514 65 43 Fax +82 2 514 65 48
Netherlands: Rijswijk Tel. +31 70 4132 100 Fax +31 70 4132 109
People’s Rep. of China: Hong Kong Tel. +852 2564 6699 Fax +852 2564 4163
Portugal: Lisbon Tel. +351 21 388 9112 Fax +351 21 385 4668
Singapore Tel. +65 6779 7823 Fax +65 6773 0628
Spain: Barcelona Tel. +34 93 494 95 30 Fax +34 93 494 95 32
Sweden: Kista Tel. +46 8 625 45 45 Fax +46 8 625 45 10
Switzerland: Heerbrugg Tel. +41 71 726 34 34 Fax +41 71 726 34 44
United Kingdom: Milton Keynes Tel. +44 1908 246 246 Fax +44 1908 609 992
USA: Bannockburn/lllinois Tel. +1 847 405 0123 Fax +1 847 405 0164
and representatives in more than 100 countries
4HE3URGICAL$IVISIONWITHIN,EICA-ICROSYSTEMS3CHWEIZ!'HOLDSTHEMANAGEMENTSYSTEM
CERTIFICATESFORTHEINTERNATIONALSTANDARDS)3/)3/AND)3/
RELATINGTOQUALITYMANAGEMENTQUALITYASSURANCEANDENVIRONMENTALMANAGEMENT
Illustrations, descriptions and technical data are not binding and may be changed without notice.
10 M1 8440en/F • © Leica Microsystems (Schweiz) AG • CH-9435 Heerbrugg, 2009 • Printed in Switzerland – VII.2009 – RDV –
Loading...