Leica IMS500 HD, IMS500 User Manual
Leica IMS500
Leica IMS500 HD
Manual
Contents
Safety regulations 3
Safety concept 4
Symbols used in this operating manual 4
Important Notes 5
Instructions on use 6
Information for the person responsible for the instrument 7
Care instructions 8
Accessories, maintenance and repair 9
Electrical data and ambient conditions 10
Unpacking 10
Installation! 11
IMS500 - Installation Basic Systems with Computers 12
IMS500 - Installation Advanced Systems with Computers and
remote control USB 13
IMS500 HD - Installation Basic System without Computers 14
Quick Start! 15
Keypad functions 16
Additional Keypad functions for IMS500 Advanced
Systems with computers and remote control 18
Specifications IMS500 19
Specifications IMS500 HD 20
Leica IMS500 / IMS500 HD Manual 2
Safety regulations
Leica IMS500 / IMS500 HD Manual 3
Safety concept
Symbols used in this operating manual
This operating manual describes the special functions of the
individual modules of the Leica IMS500 Systems Interactive
Microscopy System and contains important instructions for
their operational safety, maintenance, and accessories.
You can combine individual system articles with articles
from external suppliers. Please read the user manual and
the safety requirements of the supplier.
Before installing, operating or using the system, read the
user manual. In particular, please observe all safety instructions.
To maintain the unit in its original condition and to ensure
safe operation, the user must follow the instructions and
warnings contained in the user manual.
Additional information about other instruments from Leica
Microsystems Ltd. can be found online at
www.leica-microsystems.com.
The "Safety concept" booklet contains additional safety
information regarding the service work, requirements
and the handling of microscope, accessories and electrical
accessories as well as general safety instructions.
Warning of a danger
This symbol indicates especially important infor-
•
mation that must be read and complied with.
Failure to comply can cause the following:
Ϙ Hazards to personnel
Ϙ Functional disturbances or damaged instruments
Warning of hazardous electrical voltage
This symbol indicates especially important infor-
mation that is mandatory to read and observe.
Failure to comply can cause the following:
Ϙ Hazards to personnel
Ϙ Functional disturbances or damaged instruments
Danger due to hot surface.
This symbol warns against touching accessible hot
surfaces, e.g. those of light bulbs.
Important information
This symbol indicates additional information or
explanations that intend to provide clarity.
Explanatory notes
ϐ This symbol within the text points to additional infor-
mation and explanations.
Leica IMS500 / IMS500 HD Manual 4
Important Notes
Description
The Leica IMS500 Systems meets today's state of the art
of technology. Nevertheless, hazards may still arise during
operation. The potential risks are described below.
Before installing, operating or using the instru-
•
ments, it is required to read this user manual. In
particular, please observe all safety instructions.
Contact address
Leica Microsystems (Switzerland) Ltd.
Industry Division
Max Schmidheiny Strasse 201
CH-9435 Heerbrugg (Switzerland)
User Manual
This user manual includes important instructions related to
operating safety, maintenance and accessories.
Your Leica IMS500 Systems comes with a printed
manual. Keep it in a safe place, and readily accessible to the user. User manuals and updates are also available for you to download and print from our web site at
www.leica-microsystems.com
Produced for Leica Microsystems from
EBS
Euchner Büro- und Schulsysteme GmbH
Ernst-Leitz-Strasse 3
DE-63150 Heusenstamm
Accessories from third-party suppliers
You can combine individual system articles with articles
from external suppliers. Please read the user manual and
the safety requirements of the supplier.
Original condition
To maintain the unit in its original condition and to ensure
safe operation, the user must follow the instructions and
warnings contained in these user manuals.
Legal requirements
Adhere to general and local regulations relating to accident
prevention and environmental protection.
EC Declaration of Conformity
Electrically operated accessories are constructed based on
the state of the art of technology and are provided with an
EC Declaration of Conformity.
Leica IMS500 / IMS500 HD Manual 5
Instructions on use
Intended use
The Leica IMS500 Systems Interactive Microscopy System is
for allowing the Teacher to select which microscope images
will be shared with himself, other students, or a projector.
Position the Leica IMS500 Systems so that it can be
•
disconnected from the power supply at any time.
The power cord must remain accessible at all times, because
the power supply is foreseen as mains disconnecting device.
Place of use
Only use the system in closed, dust free rooms and
between +10 °C and +40 °C. Protect the devices from
oil, chemicals and extreme humidity. Never use electrical devices outdoors. Install electrical devices at least 10
cm from the wall and away from ammable substances.
Avoid large temperature uctuations, direct
sunlight and vibrations.
Non-intended use
• Using the system in any way contrary to the speci-
cations in the user manual can lead to bodily harm and
damage to objects. Doing so can impair the functions of the
protective measures provided.
Only use one of the following power cords*.
Don´t unscrew any mechanical components
unless expressly instructed to do so in the instructions.
The devices and accessories described in this
operating manual have been tested for safety and
potential hazards.
The responsible Leica aliate must be consulted
•
whenever the instrument is altered, modied or
used in conjunction with non-Leica components that are
outside of the content of this manual.
Unauthorized alterations to the device or
•
noncompliant use shall void all rights to any
warranty claims.
Transport
If at all possible, use the original packaging for shipping or
transporting individual modules.
In order to prevent damage from vibrations, disassemble
all moving parts that (according to the user manual) can
be assembled and disassembled by the customer and pack
them separately.
Disposal
Disposal must comply with locally applicable laws and
regulations.
Integration in third-party products
When installing Leica products into third-party products,
the manufacturer of the complete system or its dealer is
responsible for following all applicable safety instructions,
laws and guidelines.
* Power Cords
10280636 Power cable, 2.5 m, Switzerland
10445661 Power cable, 2 m, USA
10445662 Power cable, 2 m, EURO
10445663 Power cable, 2m-2.5 m,BS
10447346 Power cable, 2 m, Japan
10450012 Power cable, 2 m, Argentina type K
10450013 Power cable, 2m, Australia type F
10450014 Power cable, 2m, China type L
10450015 Power cable, 2m, Israel type I
10450016 Power cable, 2m, Italy type E
10450017 Power cable, 2 m, South Africa type D
Leica IMS500 / IMS500 HD Manual 6
Loading...