La Crosse Technology WT-5220U-ITv2 User Manual
Atomic Digital Alarm Clock
with Indoor | Outdoor Temperature
Model: WT-5220U-ITv2
DC: 061518
For online video support:
http://bit.ly/WT-5220U-IT_SetupGuide
Table of Contents
Buttons ...........................................................
Setup ..............................................................
Settings Menu ..................................................
Atomic Time .....................................................
Backlight .........................................................
Clock Display Features .......................................
Set Alarm ........................................................
Activate | Deactivate Alarm ................................
Snooze ............................................................
Projection Brightness | Turn Off ...........................
Projection Time | Temperature ............................
Projection Rotation .............................................
Low Battery Icon ...............................................
Mount Outdoor Sensor .......................................
Restart ............................................................
Visit Us on Social Media .....................................
Speciîš¿cations ...................................................
Care and Maintenance .......................................
Warranty and Support .......................................
FCC Statement ................................................
2
2
3
3
3
4
4
4
4
5
5
5
5
6
6
6
6
7
7
7
Page | 1 www.lacrossetechnology.com/support WT-5220U-ITv2
Setup
1. Install 2-AA batteries into the TX37U-IT sensor.
2. Insert the 4.5 volt power cable into a wall outlet, then into the
bottom of the clock. Power cord required for projection to stay on.
Optional: Insert 3-AA batteries into the back of the station.
4. Keep sensor and clock within 5 feet for at least 15
minutes after installing batteries. This allows the sensor and clock
to sync properly and ensures a strong connection.
5. After 15 minutes, place sensor in desired location (position
sensor page 6).
6. Program the clock in the settings menu.
Buttons
Power
Cable
SNOOZE
WT-5220U-ITv2 www.lacrossetechnology.com/support Page | 2
Loading...