Kyocera Neo User Manual
User Guide 1
2
E1100 User Guide
This manual is based on the production version of
the Kyocera E1100 phone. Software changes may
have occurred after this printing. Kyocera reserves
the right to make changes in technical and product
specifications without prior notice. The products
and equipment described in this documentation
are manufactured under license from QUALCOMM
Incorporated under one or more of the following
U.S. patents:
4,901,307 5,109,390 5,267,262 5,416,797
5,506,865
5,544,196 5,657,420 5,101,501 5,267,261
5,414,796
5,504,773 5,535,239 5,600,754 5,778,338
5,228,054
5,337,338 5,710,784 5,056,109 5,568,483
5,659,569
5,490,165 5,511,073
The Kyocera Wireless Corp. (“KWC”) products
described in this manual may include copyrighted
KWC and third party software stored in
semiconductor memories or other media. Laws in
the United States and other countries preserve for
KWC and third party software providers certain
exclusive rights for copyrighted software, such as
the exclusive rights to distribute or reproduce the
copyrighted software. Accordingly , any copyrighted
software contained in the KWC products may not
be modified, reverse engineered, distributed or
reproduced in any manner not permitted by law.
Furthermore, the purchase of the KWC products
shall not be deemed to grant—either directly or by
implication, estoppel, or otherwise—any license
under the copyrights, patents, or patent
applications of KWC or any third party software
provider, except for the normal, non-exclusive
royalty-free license to use that arises by operation
of law in the sale of a product.
Kyocera is a registered trademark of Kyocera
Corporation. Brick Attack and Race 21 are
trademarks of Kyocera Wireless Corp.
QUALCOMM is a registered trademark of
QUALCOMM Incorporated.
Openwave is a trademark of Openwave Systems
Incorporated. eZiText is a registered trademark of
Zi Corporation. TransFlash is a trademark of
SanDisk Corporation. Bluetooth trademarks are
owned by Bluetooth SIG , Inc. and used by Kyocera
Wireless Corp. under license.
All other trademarks are the property of their
respective owners.
Copyright © 2008 Kyocera Wireless Corp. All
rights reserved. Ringer Tones Copyright ©
2000-2008 Kyocera Wireless Corp.
82-N0247-1EN, Rev. 001-DRAFT
FCC Notice
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation. To maintain
compliance with FCC RF exposure guidelines, if
you wear a handset on your body , use the Kyocera
Wireless Corp. (KWC) supplied and approved
accessory designed for this product. Using
accessories that are not supplied or approved by
KWC may violate FCC RF exposure guidelines.
Other accessories used with this device for
body-worn operations must not contain any
metallic components and must provide at least 15
mm separation distance including the antenna and
the user’s body.
THIS MODEL PHONE MEETS THE
GOVERNMENT’S REQUIREMENTS FOR
EXPOSURE TO RADIO WAVES.
User Guide 3
Your wireless phone is a radio transmitter and
receiver. It is designed and manufactured to not
exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal
Communications Commission of the U.S.
Government. These limits are part of
comprehensive guidelines and establish permitted
levels of RF energy for the general population. The
guidelines are based on standards that were
developed by independent scientific organizations
through periodic and thorough evaluation of
scientific studies. The standards include a
substantial safety margin designed to assure the
safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phones
employs a unit of measurement known as the
Specific Absorption Rate, or SAR. The SAR limit
set by the FCC is 1.6 W/kg.*
Tests for SAR are conducted using standard
operating positions specified by the FCC with the
phone transmitting at its highest certified power
level in all tested frequency bands.
Although the SAR is determined at the highest
certified power level, the actual SAR level of the
phone while operating can be well below the
maximum value. This is because the phone is
designed to operate at multiple power levels so as
to use only the power required to reach the
network. In general, the closer you are to a
wireless base station antenna, the lower the power
output.
Before a phone model is available for sale to the
public, it must be tested and certified by the FCC
that it does not exceed the limit established by the
government-adopted requirement for safe
exposure. The tests are performed in positions and
locations (e.g., at the ear and worn on the body) as
required by the FCC for each model.
Body-worn measurements differ among phone
models, depending upon availability of accessories
and FCC requirements. While there may be
differences between the SAR levels of various
phones and at various positions, they all meet the
government requirement for safe exposure.
The FCC has granted an Equipment Authorization
for this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF
emission guidelines. SAR information on this
model phone is on file with the FCC and can be
found under the Display Grant section
www.fcc.gov/oet/ea after searching on the FCC
ID: OVFKWC-K3801 (dual band) or
OVFKWC-K3802 (tri-band).
Additional information on SAR can be found on the
Cellular Telecommunications and Internet
Association (CTIA) web-site at
www.wow-com.com.
* In the United States and Canada, the SAR limit
for mobile phones used by the public is 1.6
watts/kg (W/kg) averaged over one gram of tissue.
The standard incorporates a substantial margin of
safety to give additional protection for the public
and to account for any variations in measurements.
Bluetooth® Certification
For information about E1100 Bluetooth
Certification, visit the Bluetooth Qualification
Program Web site at qualweb.bluetooth.org.
Caution
The user is cautioned that changes or
modifications not expressly approved by the party
responsible for compliance could void the warranty
and user’s authority to operate the equipment.
Optimize your phone’s performance
Use the guidelines in this user guide to learn how
to optimize the performance and life of your phone
and battery.
Air Bags
If you have an air bag, DO NOT place installed or
portable phone equipment or other objects over
the air bag or in the air bag deployment area. If
4
equipment is not properly installed, you and your
passengers risk serious injury.
Medical devices
Pacemakers—Warning to pacemaker wearers:
Wireless phones, when in the ‘on’ position, have
been shown to interfere with pacemakers. The
phone should be kept at least six (6) inches away
from the pacemaker to reduce risk.
The Health Industry Manufacturers Association
and the wireless technology research community
recommend that you follow these guidelines to
minimize the potential for interference.
• Always keep the phone at least six inches (15
centimeters) away from your pacemaker when
the phone is turned on.
• Do not carry your phone near your heart.
• Use the ear opposite the pacemaker.
• If you have any reason to suspect that
interference is taking place, turn off your phone
immediately.
Hearing aids—Some digital wireless phones may
interfere with hearing aids. In the event of such
interference, you may want to consult your service
provider or call the customer service line to discuss
alternatives.
Other medical devices—If you use any other
personal medical device, consult the manufacturer
of the device to determine if it is adequately
shielded from external RF energy. Your physician
may be able to help you obtain this information.
In health care facilities—Turn your phone off in
health care facilities when instructed. Hospitals
and health care facilities may be using equipment
that is sensitive to external RF energy.
Potentially unsafe areas
Posted facilities—Turn your phone off in any
facility when posted notices require you to do so.
Vehicles—RF signals may affect improperly
installed or inadequately shielded electronic
systems in motor vehicles. Check with the
manufacturer of the device to determine if it is
adequately shielded from external RF energy.
Blasting areas—Turn off your phone where
blasting is in progress. Observe restrictions, and
follow any regulations or rules.
Potentially explosive atmospheres—Turn off
your phone when you are in any area with a
potentially explosive atmosphere. Obey all signs
and instructions. Sparks in such areas could cause
an explosion or fire, resulting in bodily injury or
death. Areas with a potentially explosive
atmosphere are often, but not always, clearly
marked.
They include:
• fueling areas such as gas stations
• below deck on boats
• transfer or storage facilities for fuel or
chemicals
• vehicles using liquefied petroleum gas, such as
propane or butane
• any other area where you would normally be
advised to turn off your vehicle engine
Use with care
Use only in normal position (to ear). Avoid
dropping, hitting, bending, or sitting on the phone.
Avoid magnetic environments
Keep the phone away from magnets which can
cause improper functioning of the phone.
Keep phone dry
Keep phone dry. Damage can result if the phone
gets wet. Water damage is not covered under
warranty.
User Guide 5
Resetting the phone
If the screen seems frozen and the keypad does
not respond to keypresses, reset the phone by
completing the following steps:
1. Remove the battery door.
2. Remove and replace the battery.
If the problem persists, return the phone to the
dealer for service.
Accessories
Use only Kyocera-approved accessories with
Kyocera phones. Use of any unauthorized
accessories may be dangerous and will invalidate
the phone warranty if said accessories cause
damage or a defect to the phone.
Radio Frequency (RF) energy
Your telephone is a radio transmitter and receiver.
When it is on, it receives and sends out RF energy .
Your service provider’s network controls the power
of the RF signal. This power level can range from
0.006 to 0.6 watts.
In August 1996, the U.S. Federal Communications
Commission (FCC) adopted RF exposure
guidelines with safety levels for hand-held wireless
phones. These guidelines are consistent with the
safety standards previously set by both U.S. and
international standards bodies in the following
reports:
• ANSI C95.1 (American National Standards
Institute, 1992)
• NCRP Report 86 (National Council on
Radiation Protection and Measurements,
1986)
• ICNIRP (International Commission on
Non-Ionizing Radiation Protection, 1996)
Your phone complies with the standards set by
these reports and the FCC guidelines.
E911 manda t e s
Where service is available, this handset complies
with the Phase I and Phase II E911 Mandates
issued by the FCC.
Hearing Aid Compatibility (HAC) with Mo bile
Phones
Some mobile phones and hearing devices (hearing
aids and cochlear implants), when used together,
result in buzzing, humming, or whining noises
detected by the user.
Some hearing devices are more immune than
others to this interference noise, and phones also
vary in the amount of interference they generate.
The wireless telephone industry has developed
ratings for some of their mobile phones, to assist
hearing device users in finding phones that may be
compatible with their hearing devices. Not all
phones have been rated.
Phones that are rated have the rating on their box
or a label on the box. The ratings are not
guarantees and results will vary depending on the
user’s hearing device and hearing loss. If your
hearing device happens to be vulnerable to
interference, you may not be able to use a rated
phone successfully . Trying out the phone with your
hearing device is the best way to evaluate it for
your personal needs.
M-Ratings—Phones rated M3 or M4 meet FCC
requirements and are likely to generate less
interference to hearing devices than phones that
are not labeled. M4 is the better/higher of the two
ratings.
T-Ratings—Phones rated T3 or T4 meet FCC
requirements and are likely to be more usable with
a hearing device’s telecoil (“T Switch” or
“Telephone Switch”) than unrated phones. T4 is
the better/higher of the two ratings. (Note that not
all hearing devices have telecoils in them.)
6
Hearing devices may also be measured for
immunity to this type of interference. Your hearing
device manufacturer or hearing health professional
may help you choose the proper rating for your
mobile phone. The more immune your hearing aid
is, the less likely you are to experience interference
noise from mobile phones.
For more information about hearing aid
compatibility, visit the FCC's Consumer &
Governmental Affairs Bureau Web site at
www.fcc.gov/cgb/dro.
Kyocera Wireless Corp.
www.kyocera-wireless.com
To purchase accessories, visit
www.kyocera-wireless.com/store
User Guide 7
Table of Contents
1 Get Started . . . . . . . . . . . . . . . . . . . . . . . . . 9
Phone Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Attach the Lanyard . . . . . . . . . . . . . . . . . . . . . . .11
Phone Overview . . . . . . . . . . . . . . . . . . . . . . . . .11
Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Guide Conventions . . . . . . . . . . . . . . . . . . . . . . .16
2 Call Features . . . . . . . . . . . . . . . . . . . . . .18
Power Phone Up . . . . . . . . . . . . . . . . . . . . . . . .18
Make Phone Calls. . . . . . . . . . . . . . . . . . . . . . . .18
Answer Phone Calls . . . . . . . . . . . . . . . . . . . . . .18
End Phone Calls. . . . . . . . . . . . . . . . . . . . . . . . .19
Activate Voice Dialing. . . . . . . . . . . . . . . . . . . . .19
Volume Control . . . . . . . . . . . . . . . . . . . . . . . . .19
Use Speed Dialing . . . . . . . . . . . . . . . . . . . . . . .19
Emergency Services . . . . . . . . . . . . . . . . . . . . . .20
3 Text Entry . . . . . . . . . . . . . . . . . . . . . . . . . 21
Text Entry Modes . . . . . . . . . . . . . . . . . . . . . . . .21
Text Entry Quick Reference . . . . . . . . . . . . . . . .22
4 Browser . . . . . . . . . . . . . . . . . . . . . . . . . .24
Launch Browser. . . . . . . . . . . . . . . . . . . . . . . . .24
Use Browser Options . . . . . . . . . . . . . . . . . . . . .24
Search for a Web Site. . . . . . . . . . . . . . . . . . . . .25
Use a Bookmark . . . . . . . . . . . . . . . . . . . . . . . .25
Check Browser Alerts. . . . . . . . . . . . . . . . . . . . .25
Set Web Prompt . . . . . . . . . . . . . . . . . . . . . . . . .26
5 Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . 27
View Contacts Directory . . . . . . . . . . . . . . . . . . .27
Add Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Customize Contacts . . . . . . . . . . . . . . . . . . . . . .28
Contact Groups . . . . . . . . . . . . . . . . . . . . . . . . .31
Search Contacts . . . . . . . . . . . . . . . . . . . . . . . . .32
Erase All Contacts. . . . . . . . . . . . . . . . . . . . . . . .33
Count Contacts. . . . . . . . . . . . . . . . . . . . . . . . . .33
6 Camera . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Take a Picture . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Change Camera Options. . . . . . . . . . . . . . . . . . . 34
Camera Indicators and Icons . . . . . . . . . . . . . . . 35
7 Messaging . . . . . . . . . . . . . . . . . . . . . . . .36
Text Messages . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Multimedia Messages. . . . . . . . . . . . . . . . . . . . .38
Voicemail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Erase Messages . . . . . . . . . . . . . . . . . . . . . . . . .41
Work with Messages . . . . . . . . . . . . . . . . . . . . . 42
Message Settings . . . . . . . . . . . . . . . . . . . . . . . . 43
Message Groups. . . . . . . . . . . . . . . . . . . . . . . . . 46
8 Recent Calls . . . . . . . . . . . . . . . . . . . . . . .48
Call Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
View Call Timers . . . . . . . . . . . . . . . . . . . . . . . . 49
View Data Counter . . . . . . . . . . . . . . . . . . . . . . . 49
9 Settings. . . . . . . . . . . . . . . . . . . . . . . . . . .50
Settings Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Create a Custom Menu. . . . . . . . . . . . . . . . . . . . 51
Bluetooth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Sounds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Convenience . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Voice Features . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
View Phone Information . . . . . . . . . . . . . . . . . .66
10 Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
Voice Memo. . . . . . . . . . . . . . . . . . . . . . . . . . . .67
Scheduler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Alarm Clock. . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Use Tip Calculator . . . . . . . . . . . . . . . . . . . . . . .70
Use Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Use Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71
Use Stopwatch . . . . . . . . . . . . . . . . . . . . . . . . . . 71
8
Memopad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
World Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
11 BREW Apps . . . . . . . . . . . . . . . . . . . . . . .73
How does BREW Work? . . . . . . . . . . . . . . . . . . 73
Download an Application . . . . . . . . . . . . . . . . . 73
Open an Application . . . . . . . . . . . . . . . . . . . . . 74
View Application Details . . . . . . . . . . . . . . . . . . 74
Remove an Application . . . . . . . . . . . . . . . . . . . 74
Disable an Application . . . . . . . . . . . . . . . . . . . 74
Check Available Memory. . . . . . . . . . . . . . . . . . 74
12 Media Gallery . . . . . . . . . . . . . . . . . . . . . . 75
Browse Camera Pictures . . . . . . . . . . . . . . . . . . 75
Modify a Picture . . . . . . . . . . . . . . . . . . . . . . . . 75
Browse Saved Images . . . . . . . . . . . . . . . . . . . . 76
Browse Wallpapers . . . . . . . . . . . . . . . . . . . . . . 76
Edit Wallpaper Shuffle. . . . . . . . . . . . . . . . . . . . 76
Browse Screensavers . . . . . . . . . . . . . . . . . . . . 77
Browse Caller IDs . . . . . . . . . . . . . . . . . . . . . . . 77
Browse Saved Sounds . . . . . . . . . . . . . . . . . . . . 77
Browse Ringers. . . . . . . . . . . . . . . . . . . . . . . . . 77
Edit Ringer Shuffle . . . . . . . . . . . . . . . . . . . . . . 78
Browse Voice Memos . . . . . . . . . . . . . . . . . . . . 78
Delete All Files . . . . . . . . . . . . . . . . . . . . . . . . . 79
Playback Tools . . . . . . . . . . . . . . . . . . . . . . . . . 79
13 Voice Commands. . . . . . . . . . . . . . . . . . . 80
Voice Dial List. . . . . . . . . . . . . . . . . . . . . . . . . . 80
Voice Commands . . . . . . . . . . . . . . . . . . . . . . . 80
Voice Command Settings. . . . . . . . . . . . . . . . . . 82
14 Get Help . . . . . . . . . . . . . . . . . . . . . . . . . .83
User Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Customer Support. . . . . . . . . . . . . . . . . . . . . . . 83
Qualified Service. . . . . . . . . . . . . . . . . . . . . . . . 84
Phone Accessories . . . . . . . . . . . . . . . . . . . . . . 84
Become a Product Evaluator. . . . . . . . . . . . . . . 84
User Guide 9
1 Get Started
Phone Battery
Install the Battery
To install the battery:
1. Hold the phone face down.
2. Find notch directly above the back cover. It is
square. Use the notch to slide the cover
down. Lift the cover from the bottom to
remove.
3. Place the battery in the battery casing with
the metal contacts facing toward the bottom
of the phone. The metal contacts of the
battery must make contact with the metal
contacts of the battery casing.
4. Replace the battery door by sliding the
notches into the openings on each side of the
battery casing.
5. Snap the cover into place.
Charge the Battery
You must have at least a partial charge in the
battery to make or receive calls.
To charge the battery:
1. Connect the AC adapter to the microUSB jack
on the side of the phone.
2. Plug the adapter into a wall outlet.
The battery icon in the upper-right corner of the
screen tells you whether the phone is:
– Charging (the icon is animated)
– Partially charged
– Fully charged
10 Phone Battery
You can safely recharge the battery at any time,
even if it has a partial charge.
Warning: The battery will not charge if you use
the phone while it is connected to an AC adapter.
Note: Before removing the battery, make sure the
phone is powered off.
Battery Safety Guidelines
• Do not disassemble or open the battery.
• Do not crush, bend, deform, puncture, or
shred the battery.
• Do not attempt to insert foreign objects into
the battery.
• Do not immerse the battery or expose it to
water or other liquids. Even if a battery
appears to dry out and operate normally,
internal parts can slowly corrode and pose a
safety hazard.
• Always keep the battery between 15 °C and 25
°C (59 °F and 77 °F). Do not expose the
battery to extremes of temperature (heat or
cold), fire, or other hazards such as a cooking
surface, iron, or radiator.
• Never use any damaged battery.
• Only use the battery for its intended phone.
• Only use the battery with a qualified charger.
Use of an unqualified battery charger may
present a risk of fire, explosion, leakage, or
other hazard. If you are unsure about whether
a charger is qualified, contact customer
support.
• Do not short-circuit the battery or allow
metallic conductive objects—such as keys,
coins, or jewelry—to contact the battery’s
terminals.
• Replace the battery only with another qualified
battery. Use of an unqualified battery may
present a risk of fire, explosion, leakage, or
other hazard. If you are unsure about whether
a replacement battery is compatible, contact
customer support.
• Promptly dispose of used batteries in
accordance with local regulations and recycle
if possible. Do not dispose as household
waste.
• Supervise all battery usage by children.
• Avoid dropping the phone or battery. If the
phone or battery is dropped, especially on a
hard surface, an internal short-circuit can
occur and pose a safety hazard. If you suspect
battery damage, take it to a service center for
inspection.
• Improper battery use may result in a fire,
explosion, or other hazard.
User Guide 11
Common Causes of Battery Drain
• Playing games or using the Web.
• Taking pictures with the flash on.
• Keeping backlighting on.
• Operating in digital mode when far away from
a base station or cell site.
• Using data cables or accessories.
• Operating when no service is available, or
service is available intermittently.
• High earpiece and ringer volume settings.
• Repeating sound, vibration, or lighted alerts.
Attach the Lanyard
To attach the lanyard:
1. Hold the phone face down.
2. Find the notch directly above the back cover.
It is square. Use the notch to slide the cover
down. Lift the cover from the bottom to
remove.
3. Remove the battery. Use the notch directly
below the battery casing. It is a half circle.
4. Thread the lanyard through the upper square
notch’s hole.
5. Make sure the lanyard catches on the hook
inside the hole.
6. Insert the battery.
7. Replace the battery door cover and snap it
into place.
Phone Overview
Get to Know Your Phone
The phone is shown here in the open position.
1. Home screen.
12 Phone Overview
2. Left softkey selects items that appear on the
lower left of the display. At the home screen,
you can select Menu.
3. Navigation key scrolls through lists and text
entry fields and accesses the following
shortcuts from the home screen.
– Scroll left to launch Browser.
– Scroll right to go to Tools > Voice
Memo.
– Scroll up to create a custom menu
shortcut.
– Scroll down to go to Recent Calls > All.
4. Send key starts or answers a call. Press once
to activate voice command, twice to display
the All Calls list, and three times to redial the
last number dialed. Press and hold to
activate voice commands.
5. Speakerphone key activates the
speakerphone and answers incoming calls.
6. Keypad for entering numbers, letters, or
symbols.
7. * Shift key changes the text mode in text
entry.
8. 0 Next key cycles through word choices
during text entry.
9. Right softkey selects items that appear on
the lower left of the display. At the home
screen, you can select Contacts.
10. OK key selects a menu item or option. At the
home screen, you go to the main menu when
you press the OK key.
User Guide 13
11. End key turns the phone on and off, ends a
call or browser session, and returns you to
the home screen.
12. Back key erases characters in text entry and
returns you to the previous screen when
navigating through menus.
13. # Space key enters a space during text entry.
Press and hold to activate or deactivate Silent
mode.
The phone is shown here in the closed position.
When the phone is closed, the keys are locked to
prevent accidental key presses.
1. Camera lens.
2. Volume key raises or lowers ringer volume.
3. Camera key activates Camera mode. To
activate camera mode, press and hold the
Camera key.
4. External screen displays time, caller ID,
signal, and battery strength.
5. Lightpipe LED.
6. Jack for microUSB cable (sold separately).
7. Jack for a hands-free headset (sold
separately).
Warning: Inserting an accessory into the
incorrect jack will damage the phone.
Lightpipe LED Behavior
Your phone’s lightpipe LED displays different
patterns depending upon the alert. You can
disable the lightpipe LED, see “Set LightPipe
Behavior” on page 56.
New message One flash. If you do not
respond, your phone will flash
again to remind you.
Incoming
call
Heartbeat pulse. It will
continue until you answer the
phone or miss the call.
Missed call One flash. If you do not
respond, your phone will flash
again to remind you.
In call Wave pulse. It will continue
until the call ends.
Alarm Three flashes. It will continue
until you respond to the alert.
Scheduler Three flashes. It will continue
until you respond to the alert.
14 Phone Overview
Note: Incoming emergency calls always activate
the LED, even if you have disabled it.
Screen Icons
These icons may appear on your phone’s screen.
Bluetooth One flash. It will continue until
you respond to Bluetooth
request.
Low battery One flash. It will continue until
you charge the phone.
Charging Wave pulse. Displays when the
phone is being charged.
The phone is operating in IS95 digital
mode.
The phone is operating in IS2000 (1X)
digital mode.
The phone is receiving a signal. You can
make and receive calls. Fewer bars indicate
a weaker signal.
A call is in progress.
The phone has a standard speed data
connection.
The phone is not receiving a signal. You
cannot make or receive calls.
Content is DRM protected.
Data service is available and active on your
phone. Check with your service provider for
availability.
(blinking) The phone is sending high-speed
data.
(blinking) The phone is receiving
high-speed data.
Data service is available, but the phone is
dormant.
Bluetooth wireless technology is enabled
(On).
Bluetooth wireless technology is disabled
(Off).
The phone is roaming outside of its home
service area.
New text message.
New voice message.
New voice and text message.
New photo message.
New photo and voice message.
New photo and text message.
User Guide 15
Main Menu
The contents of the main menu are as follows:
New photo, voice and text message.
The phone is set to light up instead of ring.
The phone is set to vibrate or to vibrate and
then ring.
The speaker phone is turned on.
Position location is set to your service
provider and to emergency services.
Position location is set to emergency
services only.
The phone is in camera mode.
The phone is set to auto answer.
The phone is in privacy mode or is
accessing a secure Web site.
The alarm clock is set.
The battery is fully charged. The more black
bars, the greater the charge.
The phone is in airplane mode.
16 Guide Conventions
Guide Conventions
In this guide, the following conventions are used
when describing phone features.
Select means to press the Left softkey, Right
softkey or OK key to select an item seen on the
display. For example, “Select Menu” tells you to
physically press the left softkey to choose Menu
from the display.
Press means to press a phone key. For example,
“Press the Send key to make a phone call” tells
you to physically press the Send key on your
phone.
Browser
Launches the Browser
Contacts
View All
Add New
Groups
Speed Dial List
Voice Dial List
Erase Contacts
Contacts Count
Camera
Launches the Camera
Messaging
New Text Msg
New Pic Msg
Voicemail
Inbox
Browser Alerts
Sent Msgs
Outbox
Saved Msgs
Drafts
Msg Settings
Message Groups
Erase Msg
Recent Calls
All
Incoming
Outgoing
Missed
Data
Erase Call List
Call Timer
Kilobyte Counter
Settings
Bluetooth
Sounds
Display
Convenience
Voice Features
Accessories
Network
Security
Phone Info
Tools
Voice Memo
Scheduler
Alarm Clock
Tip Calculator
Calculator
Timer
Stopwatch
Memopad
World Clock
BREW Apps
Mobileshop
Settings
Help
Media Gallery
Images
Sounds
Delete All
Note: The menu items on your phone can change depending on the services provided by your service provider.
Check with your service provider.
User Guide 17
Scroll means to use the Navigation key to move
though a list on the display. For example, “Scroll
through your Contacts list to choose a contact”
means to physically press the Navigation key up
or down to scroll through the list on the display.
> (greater than symbol) tells you to select an
option from a menu or list. For example, “Menu
> Settings” means to:
1. Press the left softkey to select Menu.
2. Scroll to the Settings option.
3. Press the OK key to select Settings.
18 Power Phone Up
2 Call Features
This section describes call features such as
volume, holding calls, speed dialing and other
features.
Power Phone Up
• To turn your phone on, press and hold the
End key and wait until the phone display
lights up.
• To turn your phone off, press and hold the
End key until the phone plays a musical
chime and turns off.
Make Phone Calls
Make sure you are in an area where a signal can
be received. Look for the signal strength icon on
the home screen. The more bars you see in this
symbol, the stronger the signal. If there are no
bars, move to where the signal strength is better.
When the phone has been idle for a time, it
changes to power save mode. When you see
“Power Save” on your phone’s screen, press any
key to return to normal operating mode.
There are several ways you can make a phone
call.
Call Using a Number
1. Enter a phone number.
2. Press the Send key.
Call Using a Contact
1. Select Menu > Contacts > View All to
open your contacts list.
2. Highlight a contact and press the Send key.
Call Using Voice Commands
You can use voice commands to call a contact
from your voice dial list or to dial a phone
number. For more information, see “Voice
Commands” on page 80.
Redial a Number
1. Press the Send key twice to open your call
history.
2. Highlight a phone number or contact and
press the Send key.
Note: To redial the last number called, received
or missed, press the Send key three times.
Answer Phone Calls
When a call comes in, the phone rings, vibrates,
or lights up. The phone number of the caller also
appears if it is not restricted. If the number is
stored in your Contacts directory, the contact’s
name appears. There are several ways you can
answer a phone call.
Answer Using Earpiece
Press the Send key.
User Guide 19
Answer Using Speakerphone
Press the Speakerphone key.
Answer Using Flip
You can set the phone to answer immediately
when you open the flip. This feature does not
apply to incoming data calls. For more
information, see “Enable Open to Answer” on
page 59.
End Phone Calls
To end a phone call press the End key.
Activate Voice Dialing
1. Press and hold the Send key.
2. Follow the prompts.
For more informaton, see “Voice Commands” on
page 80.
Volume Control
There are several ways to control the volume of
your phone.
Adjust Volume during a Call
To adjust the earpiece volume during a call, press
the Volume key up or down.
Use the Speakerphone
Your phone has a built-in speakerphone.
• To turn on the speakerphone, press the
Speakerphone key. The speakerphone icon
appears on the home screen when the
speakerphone is on.
• To turn off the speakerphone, press the
Speakerphone key again.
Note: If you press the Speakerphone key during
an incoming call, you will answer the call.
Silence an Incoming Call
• To silence the phone without answering the
call select Silence, press the Back key, or
press the Volume key.
• To silence the phone and answer the call,
select Silence and then press the Send key.
Note: In the absence of voicemail, this feature
drops the call.
Use Speed Dialing
Speed dialing allows you to assign a one- or
two-digit shortcut to a contact. Before you can use
speed dialing you must save a phone number as a
contact and assign a speed dial location to it. See
“Customize a Number” on page 28.
To call a contact that has a speed dial location.
1. Enter the one- or two-digit speed dial
location.
2. Press the Send key.
20 Emergency Services
Emergency Services
Call Emergency Service
You can call an emergency code, even if your
phone is locked or your account is restricted.
When you call, your phone enters Emergency
mode. This enables the emergency service
exclusive access to your phone to call you back, if
necessary. To make or receive regular calls after
dialing the code, you must exit this mode.
To place dial an emergency code:
1. Enter your 3-digit emergency code.
2. Press the Send key.
Note: Regardless of your 3-digit emergency code
(911, 111, 999, 000, etc.), your phone operates
as described.
Exit Emergency Services
When you have completed the emergency call:
1. Select Exit.
2. Select Exit again to confirm your choice.
Note: To determine who has access to your
location, see “Set Location Information” on page
64.
User Guide 21
3 Text Entry
You can enter letters, numbers, and symbols in
contacts, text messages, and your banner.
Text Entry Modes
The current text entry mode (and capitalization
setting, when applicable) are indicated by icons.
The text entry screen has the following features:
1. Characters remaining that you can type.
Allowed length of messages can vary
depending on your service.
2. Text entry fields.
3. Current capitalization setting.
4. Current text entry mode.
There are five text entry modes:
Note: The mode you start in depends on the task
you are doing. For example, when entering a
phone number, you’re in Numbers Only mode.
When entering a name for a contact, you’re in
Normal Alpha mode.
Enter Numbers
• To enter a number while in Numbers Only
mode, press a number key once.
• To enter a number while in Normal Alpha or
Rapid Entry mode, press and hold a number
key until the number appears on the screen.
Enter Words Letter by Letter
1. Press a key once for the first letter, twice for
the second letter, and so on. If your phone is
set to Spanish, French, or Portuguese,
accented letters are available.
2. Wait for the cursor to move right and enter
the next letter.
Note: To enter a space, press # Space key.
Enter Words Quickly
When you press a series of keys using Rapid Entry
mode, your phone checks its dictionary of
Case Change
Numbers Only
Normal Alpha
Rapid Entry
Add Symbol
22 Text Entry Quick Reference
common words and guesses at the word you are
trying to spell.
1. For each letter of the word you want, press
the key once. For example, to enter the word
“any” press the 2 > 6 > 9 keys.
2. If the word doesn’t match what you want,
press 0 Next key to look at other word
matches.
3. When you see the word you want, press the #
Space key.
Enter Symbols
While entering text in Normal Alpha mode, you
can enter symbols by pressing the 1 key until you
see the symbol you want. Using this method, you
have access to the following symbols:.
. @ ? ! - , & : ‘ ]
To access the full set of symbols:
1. From the text entry screen select Options >
Add Symbol.
2. Scroll up or down to view the list of symbols.
3. Press the number key corresponding to the
symbol to enter it.
Change Modes
Sometimes you need to change modes. For
example, to enter numbers in an email address
while in Normal Alpha mode, you must change to
numbers only mode, enter the numbers, and then
change back to Normal Alpha mode to complete
the address.
To change text entry modes:
• Press and hold * Shift key until the icon for
the mode you want appears at the top of the
screen.
• You can also select Options then select a
different mode.
Note: You can change the default text entry mode
when creating a text message. For more
information, see “Set Default Text” on page 45.
Change Capitalization
You can change capitalization at any time while
entering text.
Press the * Shift key to choose upper or lower
case while in Normal Alpha mode.
Text Entry Quick Refere nce
This table gives instructions for entering letters,
numbers, and symbols. For more information, see
“Text Entry Modes” on page 21.
User Guide 23
To.. Do this..
Enter a letter Use Normal Alpha mode and press a key until you
see the letter your want.
Enter a number Use Normal Only mode and press a key.
Enter a symbol Use Normal Alpha mode and press a key until you
see the letter your want.
Enter a space Press the # Space key.
Erase a character Press the Back key.
Erase all characters Press and hold the Back key.
Move the cursor right or left Scroll left or right.
Move the cursor up or down Scroll up or down.
Change text entry modes Press and hold the # Space key.
Capitalize any letter In Normal Alpha mode, press the * Shift key.
Choose uppercase.
Lowercase any letter In Normal Alpha mode, press the * Shift key.
Choose lowercase.
Initial caps In Normal Alpha mode, press the * Shift key.
Choose sentence case.
Select soft options on screen Press the appropriate left or right softkey.
24 Launch Browser
4 Browser
You can use your phone to browse the Internet if
you have obtained phone Internet services from
your service provider and if over-the-air Internet
access is available in your area.
Note: You cannot receive incoming calls while
you are using the browser.
Launch Browser
1. Select Menu > Browser. A message about
airtime fees appears every time you start the
browser. For more information about how
airtime is charged, contact your service
provider.
2. Select OK to continue. If this is the first time
you have connected to the Internet, a
message informs you that security is not yet
enabled for your browser.
3. Select Yes to enable security. When you are
connected, a browser home page appears. It
has a list of bookmarks and some browser
menu options at the bottom of the screen.
The lock icon appears in a secure session.
An underline and an arrow indicate that
there is more text. Scroll down to view more
text. Press the Back key to return to the
previous screen.
4. To choose a site, scroll to the link and press
the OK key.
5. When you have finished using the browser,
press the End key to exit.
Use Browser Options
You can configure your browser.
During an active browser session, select Options
and one of the following:
• Display Mode selects how the Web page is
displayed. Normal Screen configures the
content to fit on the screen. Wide Screen
does not fit the content to the screen.
• Zoom Levels allows you to zoom into a
specific area of the page. This option only
appears when the Wide Screen mode is
active.
• Map On shrinks the Web page to display the
full page on the screen. This allows you to
choose certain areas of the page to zoom into.
User Guide 25
This option only appears when the Wide
Screen mode is active.
• Forward moves to next page in your
navigation trail.
• Back moves to previous page in your
navigation trail.
• Home returns to the browser home page.
• Add to Bookmarks saves the current page
as a bookmark for easy access.
• Bookmarks opens a list of your saved
bookmarks.
• Search opens the browser search page.
• Send URL sends the URL of the current page
with a text message.
• Go to URL... allows you to enter the URL of a
new page and go there.
• Refresh reloads the current page.
• History displays the pages you have visited.
• Quit exits the browser.
• More... > Show URL displays the entire URL
of the current page.
• More... > Restart Browser relaunches the
browser.
• More... > Clear IDs and Passwords clears
the browser cache of user names and
passwords.
• More... > Certificates displays certificates
used in the current browser session.
• More... > Save Items on the Page allows
you to save content from the current page to
your phone.
• More... > Preferences allows you to change
the home page and other browser settings.
• More... > About displays information about
your browser session.
Search for a Web Site
How you search for a Web site depends on your
service provider. For more information, contact
your service provider.
Use a Bookmark
1. Select Menu > Browser.
2. Select OK to accept browser fees.
3. From your Web home page, select Options
> Bookmarks. A list of bookmarks
appears.
4. Select a bookmark.
Check Browser Alerts
Alerts received from a Web site are sent to your
Browser Alerts folder. To check them, do the
following:
1. Select Menu > Messaging > Browser
Alerts. This action launches the browser
inbox.
2. Select OK to accept browser fees.
3. Select an alert and follow the prompts.
26 Set Web Prompt
Set Web Prompt
You can set a prompt to confirm the start or exit
of the browser. See “Set Web Alerts” on page 64.
User Guide 27
5Contacts
Use your phone’s contacts directory to store
information about a person or company. Each
contact entry can have up to six phone numbers,
two email addresses, two Web addresses, two
street addresses, and a space for notes.
View Contacts Directory
To view existing contacts in your phone:
1. Select Menu > Contacts > View All. Your
contacts are listed alphabetically.
2. Highlight a contact and do one of the
following:
– Press the Send key to call the contact.
– Press the OK key view the contact’s
details.
– Select New to create a new contact.
– Select Options > Call to call the
contact.
– Select Options > Send Text Msg to
send a text message.
– Select Options > Send Pict Msg to
send a picture message.
– Select Options > View Contact to view
the contact’s details.
– Select Options > Edit Contact to edit
the contact.
– Select Options > Erase Contact to call
the contact.
– Select Options > Send as vCard to
send contact as a vCard.
– Select Options > Send All to send all
contacts to a Bluetooth device or a
connected printer.
– Select Options > Contacts Menu to
access the Contacts menu.
Add Contacts
Add Contact from Home Screen
To add a contact to your Contacts directory:
1. From the home screen, enter a phone
number to save (include the area code).
2. Select Save > Save New Contact.
3. Enter a name for the contact.
4. Enter additional phone numbers, email
addresses, Web addresses and note, if
needed. Scroll up or down to move through
the contact fields.
5. When you are done entering information,
select Save.
Add Contact from Contacts Menu
To add a contact to your Contacts directory:
1. Select Menu > Contacts > Add New.
2. Enter a name for the contact. When you are
done scroll down to the next field.
28 Customize Contacts
3. Enter a primary number for the contact.
4. Enter additional phone numbers, email
addresses, Web addresses and note, if
needed. Scroll up or down to move through
the contact fields.
5. When you are done entering information,
select Save.
Add Code or Extension
When you save the phone number of an
automated service, you may include a pause to
stop dialing. For example, a pause where you
would wait to dial an extension.
1. From the home screen, enter a phone
number.
2. Select Options and a type of pause:
– Time Pause causes the phone to stop
dialing for two seconds.
– Hard Pause causes the phone to stop
until you select Release while making
the call.
3. Enter the remaining numbers and select
Save > Save New Contact.
4. Complete the contact and select Save.
Customize Contacts
Edit Contact Details
To edit details of an existing contact.
1. Select Menu > Contacts > View All.
2. At the contacts directory, select a contact.
3. At the contact details screen, select Edit.
4. Edit or add phone numbers, email
addresses, Web addresses and notes. Scroll
up or down to move through the contact
fields.
5. When you are done entering information,
select Save.
Customize a Name
To customize the name of an existing contact.
1. Select Menu > Contacts > View All.
2. At the contacts directory, select a contact.
3. At the contact details screen, scroll to the
name.
4. Select Options and one of the following.
– Ringer assigns a specific ringer to the
contact.
– Msg Tone assigns a specific message
tone to the contact.
– Picture assigns a specific picture to the
contact.
– Erase Contact deletes the contact. This
will erase the entire contact.
– Send as vCard sends the contact as a
vCard.
Customize a Number
To customize the number of an existing contact.
1. Select Menu > Contacts > View All.
User Guide 29
2. At the contacts directory, select a contact.
3. At the contact details screen, scroll to a
number.
4. Select Options and one of the following.
– Call calls the contact.
– Send Text Msg sends a text message.
– Send Pict Msg sends a multimedia
message.
– Prepend displays the contact details
screen for you to change the number
(adding an area code) or other data of
the contact.
– Add Speed Dial adds the number to
your speed dial list.
– View Number displays the number.
– Erase Number deletes number from the
contact.
– Secret / Not Secret makes the number
secret. It will not appear on the screen
until the lock code is entered. Secret
numbers can be called without a lock
code.
– Primary Number makes this number
the primary number for the contact.
– Send as vCard sends the contact as a
vCard.
– Add To Group adds the number to the
business, personal or custom group.
Customize an Email Address
To customize the email address of an existing
contact.
1. Select Menu > Contacts > View All.
2. At the contacts directory, select a contact.
3. At the contact details screen, scroll to an
email address.
4. Select Options and one of the following.
– Send Text Msg sends a text message.
– Send Pict Msg sends a multimedia
message.
– View Address displays the email
address.
– Add To Group adds the email address
to the business, personal or custom
group.
– Erase Address deletes email address
from the contact.
– Secret / Not Secret makes the email
address secret. It will not appear on the
screen until the lock code is entered.
– Send as vCard sends the contact as a
vCard.
Customize an IM Address
To customize the IM address of an existing
contact.
1. Select Menu > Contacts > View All.
2. At the contacts directory, select a contact.
30 Customize Contacts
3. At the contact details screen, scroll to an IM
address.
4. Select Options and one of the following.
– View IM displays the street address.
– Erase IM deletes street address from the
contact.
– Send as vCard sends the contact as a
vCard.
Customize a Web Address
To customize the Web address of an existing
contact.
1. Select Menu > Contacts > View All.
2. At the contacts directory, select a contact.
3. At the contact details screen, scroll to a Web
address.
4. Select Options and one of the following.
– Launch Web launches the Web browser
and goes to Web address.
– Send Pict Msg sends a multimedia
message.
– View Web displays the Web address.
– Erase Web deletes Web address from
the contact.
– Send as vCard sends the contact as a
vCard.
Customize a Street Address
To customize the street address of an existing
contact.
1. Select Menu > Contacts > View All.
2. At the contacts directory, select a contact.
3. At the contact details screen, scroll to a street
address.
4. Select Options and one of the following.
– View Address displays the street
address.
– Erase Address deletes street address
from the contact.
– Send as vCard sends the contact as a
vCard.
Customize a Note
To customize the note of an existing contact.
1. Select Menu > Contacts > View All.
2. At the contacts directory, select a contact.
3. At the contact details screen, scroll to a note.
4. Select Options and one of the following.
– View Note displays the note.
– Erase Note deletes note from the
contact.
– Secret / Not Secret makes the note
secret. It will not appear on the screen
until the lock code is entered.
– Send as vCard sends the contact as a
vCard.
Loading...