Kyocera FS-C8600DN, FS-C8650DN SERVICEBULLETINS 2LC 0117 D113
(Page.1/2)
Subject
Measures against the Damage to the Cassette Rails (Service
Parts)
Model l:
PF-780, PF-730, TASKalfa 7550ci, TASKalfa 6550ci,
TASKalfa 5550ci, TASKalfa 4550ci, TASKalfa 3550ci,
TASKalfa 3050ci, TASKalfa 8000i, TASKalfa 6500i,
TASKalfa 5500i, TASKalfa 4500i, TASKalfa 3500i, FS-C8650DN,
FS-C8600DN
PF-730
TASKalfa 7550ci/6550ci, TASKalfa 5550ci/4550ci/3550ci/3050ci, TASKalfa 8000i/6500i, TASKalfa 5500i/4500i/3500i,
FS-C8650DN, FS-C8600DN
PF-780
TASKalfa 7550ci/6550ci, TASKalfa 5550ci/4550ci, TASKalfa 8000i/6500i, FS-C8650DN, FS-C8600DN
KDC's Classification Entire Stock Rework In-Field modification at next visit
In-Field modification by case No modification necessary
Field Measures:
Apply the field measure parts (No.1 to No.3) when the phenomenon described below arises or for the
preventive action. (For more details, please refer to the description below.)
Serial Nos. of the Affected Machines:
As these are service parts, the serial numbers of the affected machines are not available.
1 may contact the pulley A in the figure left and may be
broken if pulled out just before fully open and the
downward force is applied to the cassette.
5 may contact the pulley B in the figure left and may be
broken if repeatedly pulled out with fully loaded paper in
the cassette.
*Others than 1 and 5 above may be damaged depending
on the position of the pulled-out cassette.
<Cassette rail damage position>
(1 and 5 are mostly damaged in the figure below.)
(Machine front side)
Pulley A
Pulley B
<Main unit side pulley position>
1
5
Service Bulletin Ref. No. 2LC-0117 (D113)
<Date> June 5, 2013
Affected models:
Topic
The left side cassette rail which contacts the main unit side pulleys might be damaged if the cassette is repeatedly
pulled out with fully loaded paper in the cassette or if the downward force was applied to the cassette. Therefore,
the following parts were newly set up as service parts for repair and preventive action (Field measure parts No.1 to
No.3).
*It is also planned to add ribs to the cassette rails as the permanent measures in order to increase the strength of
the cassette rails. (The change will be implemented at the production.)
KYOCERA Document Solutions Europe
Customer Services & Support Division (CSSD)
(Page.2/2)
No.
Old Part
No.
New Part
No.
Description
Q
ty.
Com
bi
patility
Remarks
Old
New
Old
New
1
-----------
302K994D90
2K994D90
PARTS A-B RAIL CASSETTE SET
SP
-
1
-
O
1 pc. of No.2 and 2
pcs. of No.3 are
bundled
2
-----------
302K909680
2K909680
+ PARTS A RAIL CASSETTE SP
-
1
-
O
Reinforcing part
-- Large
3
-----------
302K909690
2K909690
+ PARTS B RAIL CASSETTE SP
-
2
-
O
Reinforcing part
-- Small
Reinforcing part
-- Large (No.2)
Reinforcing part
-- Small (No.3)
Double-sided
tape
1
2
3
4 5 6
7
[Where to fit/direction]
1
2
3 4 5
6
7
[Where to fit/direction]
Reinforcing part
-- Large (No.2)
Reinforcing part
-- Small (No.3)
Reinforcing part
-- Large (No2)
Reinforcing part
-- Small (No3)
Reinforcing part —Small (No.3)
Cassette rear
side
Cassette rear
side
(Cassette left side)
Corner cut
Flange
Flange
(Note) The reinforcing parts cannot be installed depending on
the cassette rail damage. In this case, cut the bottom of the
damaged part in the cassette rail interfering with the reinforcing
parts by using nippers.
- Apply to other than 4
in the figure left.
- Install with the corner
cut facing down.
- Apply to 4 in the
figure left.
- Install with the flange
facing up.
Cassette upper side
Cassette upper side
(Rear side)
(Front side)
Corner cut
(Cassette left side)
- Apply to 1 - 7 in the figure left.
- Fit this with the flange facing the
cassette rear side.
Service Bulletin Ref. No. 2LC-0117 (D113)
<Date> June 5, 2013
"+" mark at the beginning of the part name indicates that it is a component part.
<Use of the field measure parts (No.2, No.3)>
Please note that the parts to be used and the direction to install differ before and after the damage.
How to repair the broken rail--- Apply to damaged rail.
How to strengthen the rail---Apply where is deformed or whitened on the rail resin
( 1 and 5 are mostly damaged.)
KYOCERA Document Solutions Europe
Customer Services & Support Division (CSSD)
Loading...