Kyocera FS-C8020MFP, FS-8025MFP SERVICEBULLETINS 2KZ 0008 B217

Q’

Com

bi

p

ati-

(2) Wire cover:

S

hape changed

Where

Where

Service Bulletin Ref. No.

Subject

(Page.1/3)

2KZ-0008 (B217)

<Date> July 20, 2011

Notes on Replacement of the Parts when the Wire Cover is
Coming off

Model

FS-C8020MFP, FS-C8025MFP

Topic

The shape of the BASE CONVEYING and the wire cover were changed in order to prevent the wire cover from
coming off. Accordingly, some attention is required when replacing the COVER RIGHT ASSY (No.1) and the
CONVEYING UNIT (No.2).

Content of Changes

(1) The shape of the BASE CONVEYING was changed.
(2) The shape of the wire cover was changed. For more details, please refer to the next page.

(1) BASE CONVEYING: Shape changed

<Note>
The spacer is no more applied to the new type part (No.1) due to the wire cover shape change. However, the
spacer and the caution leaflet are now bundled with the new part (No.1), and the caution leaflet only is bundled with
the new part (No.2) to maintain the compatibility when replacing the parts

Old Part

No.

1

2

*1: A spacer and the leaflet are bundled with the new part. *2: The leaflet is bundled with the new part.

KMC’s Classification Entire Stock Rework In-Field modification at next visit

Field Measure: Please replace the parts with good care by referring to the bundled leaflet.

Serial Nos. of Affected Machine: Planned from June 2011 production*

No.

302K094030

2K094030

302K094020

2K094020

*The above is the plan at the present moment. Please note that there is a possibility of change after giving this information.

New Part

No.

302K094031

2K094031

302K094021

2K094021

changed

changed

Description

PARTS COVER RIGHT ASSY SP 1 1

PARTS CONVEYING UNIT SP 1 1

In-Field modification by case No modification necessary

ty

Old New Old New

lity

X O

X O

*1

*2

Remarks

European Service & Development Center (ESDC)

KYOCERA MITA Europe B.V.

Cover: e

xtended

Service Bulletin Ref. No.

<Content of Changes: to prevent the wire cover from coming off>
(1) BASE CONVEYING shape change

(Old)

(2) Wire cover shape changed
(Old)

The spacer was removed after the rib was added. However, the spacer and caution leaflet are now
bundled with the new part (No.1), and the caution leaflet only with the new part (No.2) to maintain the
compatibility when replacing the parts. For more details on the use of the spacer, please refer to the
caution leaflet. Please see below for the content of the caution leaflet.

<Date> July 20, 2011

(New) A hook was added to prevent the wire cover from

coming off. The cover was extended to hide the connector,
and the sheet was removed.

Sheet

Wire cover

Rib added

KYOCERA MITA Europe B.V.

European Service & Development Center (ESDC)

Rib: added,
Spacer to the COVER RIGHT ASSY: Abolished

COVER RIGHT ASSY

(Page.2/3)

2KZ-0008 (B217)

(New) Space widened to absorb the

wire motion by opening/closing of
the cover

Hook to latch rear right cover

Hook to latch rear side plate

Spacer removed