
Service Bulletin Ref. No.
Subject
(Revised issue 1)
(Page.1/3)
2KZ-0015 (B295)
<Date> November 14, 2011
Measures against the Color Registration Shift
(Change of the Secondary Transfer Roller Diameter)
Model
This time, the description with (-->) was revised from the previous information.
<Number of changes: 2> The actual serial numbers of the affected machines were added.
FS-C8020MFP, FS-C8025MFP
Topic
The color registration shift might occur depending on the operating environment for the machine in the environment
with high temperature and high humidity. The following changes were made in order to control the slippage between
the drive roller and the primary transfer belt at high humidity.
Content of Changes
1. The diameter of the secondary transfer roller was increased in order to increase the primary transfer belt
drive force to control the slippage.
2. The shape of the transfer roller gear was changed in order to cope with the increased drive torque after the
change above.
3. The protection sheet for the spare part secondary transfer roller was changed to plastic film after the
change above. (The protective sheet is applied since the ribs at the neighboring guide plate may contact.
The protection shall be improved for the roller with larger diameter after the sheet was changed to the
film.)
4. Since the process speed should be readjusted when the old parts were replaced with the new one after the
change above, a leaflet describing the change of the U053 (Setting the adjustment of the motor speed) is
now bundled in the new parts (Nos.1 and 2) and in the MK-895A.
<Outline of the change>
Primary
transfer belt
<Content of change>
1. Secondary transfer
roller diameter increased
(Old) 21.10±0.15
(New) 22.15±0.15
No.1.2
Belt drive force increased
Secondary transfer roller
Linear speed-up by secondary transfer
roller diameter increase
2. Transfer roller gear
3. Protective sheet change
(Old) Thick paper
(New) PET film (#250)
(Please refer to the next page.)
changed
(Black White or
Black gear with
white marking)
Old (thick paper)
European Service & Development Center (ESDC)
KYOCERA MITA Europe B.V.

(Revised issue 1)
Service Bulletin Ref. No.
(Page.2/3)
2KZ-0015 (B295)
<Date> November 14, 2011
No.
1
2
Old Part
No.
302K093080
2K093080
302K09K080
2K09K080
New Part
No.
302K093081
2K093081
302K09K081
2K09K081
Description
TR-895B 1 1
TR-895B(KR) 1 1
ty
Old New Old New
lity
X O
X O
Remarks
Except KMKR
For KMKR
KMC’s Classification Entire Stock Rework In-Field modification at next visit
In-Field modification by case No modification necessary
Field Measure:
Please replace the parts (Nos.1&2) with the new ones when the phenomenon described above occurs. Also,
please check and change the maintenance mode U053 values by referring to the bundled leaflet.
Then, please make sure to execute what is described in “Note when adjusting the color registration” on the
service bulletin SB-2KZ-0011-B240.
Serial Nos. of the Affected Machines: KMAS/KMBR/KMA220V : Planned from the August 2011 production*
Others : After using up the old stock
*The above is the plan at the present moment. Please note that this information is subject to change.
5. New leaflet
The U053 setting values on the bundled leaflet
(-->) Serial Nos. of the Affected Machines
Change1 and 2 (Increase of the secondary transfer roller external diameter/ change of the transfer roller gear
shape)
FS-C8025MFP
KMA120V KME KMAUS UTAX/TA CS KMBR KMHG KMA220V
1102K02US
From next
production
KMKR KMTW KMID KMSG KMTH KTST KMA (GSA) Olivetti
1102K03KR
NCV1800541 NCW1800092
PHILIPINE
1102K04PH
NM81800001
1102K03NL0 1102K03AS0 1102K03UT0
From next
production
1102K0TTW
From next
production
1102K03ND0 1102K03SG0
From next
production
From next
production
NFQ1800061 NFR1900059 NG71800331
1102K02CS0 1102K02BR0
From next
production
1102K03TH0 1102K03KS0
From next
production
1102K03HK
NAC1800061
1102K02US
to be
informed
1102K04US0
From next
production
1102K03LV0
From next
production
European Service & Development Center (ESDC)
KYOCERA MITA Europe B.V.