Kyocera FS-C8020MFP, FS-8025MFP SERVICEBULLETINS 2KZ-012
Service Bulletin
SB Number:
Subject:
SB 2KZ-012
“Cover is open. Close the front cover“ may not disappear
Creation Date: 01/02/2012
Model: FS-C8020MFP/8025MFP
Phenomenon The message “The cover is open. Close the front cover“ may not disappear after closing the
Front cover.
Solution The shape of the Holder SW has been changed as follows:
1. The length of the Lever from the Front cover part to the leading edge of the Lever has
been extended by 1mm.
2. The shape of the leading edge of the Lever has been changed from rounded to at, to
minimize the variation of the Push rod dept during up and down motion of the Lever.
Old condition New condition Old condition New condition
4mm
Round shape
Parts
No. Old Parts
No.
1 302K094060
2K094060
2 ---------- 302K004350
Classication
Field measure When the above mentioned phenomenon occurs, please replace the Holder switch with the latest
Serial numbers of affected machines
Type Serial number
FS-C8020MFP/8025MFP Planned from December 2011 production*.
The above is the plan at the present moment. Please note that there is a possibility of change after giving this
information.
New Parts
No.
302K094061
2K094061
2K004350
Entire stock rework
type.
Flat shape 36,5mm
Description Q’TY Interchange-
PARTS COVER FRONT ASSY 25 E SP 1 1 X O
+HOLDER SWITCH - 1 - O
In-eld modication at next visit
This side up
In-eld modication by case
X
37,5mm
ability
Old New Old New
No modication necessary
KMIS Service Department, Kyocera Mita Europe B456 / SB 2KZ-012
Page 1 of 1
Loading...