Kyocera FS-C8020MFP, FS-8025MFP SERVICEBULLETINS 2KZ 0023 C014 1
(Revised issue 1)
Service Bulletin Ref. No.
<Date> February 28, 2012
2KZ-0023 (C014)
(Page.1/4)
Subject Constructive Change for Cooling System Inside of the Machine
Model
This time, the description with (-->) was revised from the previous information.
<Number of changes: 1> The part number of No.3 was revised.
FS-C8020MFP, FS-C8025MFP
Topic
The structure of the cooling system inside of the machine was changed as follows. When replacing the parts,
please note this.
Content of Changes
The IH coil cooling fan (No.3) was abolished and the shape of the frame and the toner container cooling duct was
changed so that the toner container cooling fan (No.8) can cool off the toner container and the IH coil.
1) Change of the toner container cooling duct shape
(No.1/2)
2) New ventilation slits on the frame 7) Change of the wire (No.9) after disuse of the air in-
3) Disuse of the air in-take fan (No.3)
4) Duct applied to the ventilation of 2)
5) Disuse of the heat-insulating sheet (No.4/5/6/7)
2) New ventilation on frame, 4) Duct added
*The photo above shows the state after the change.
*IH coil unit was removed for better visibility.
European Service & Development Center (ESDC)
KYOCERA MITA Europe B.V.
6) Change of the cooling fan (No.8)
take fan (No.3) in 3)
3) Disuse of air in-take fan (No.3)
5)
Disuse of
7) Wire change (No.9)
1) Toner container cooloing duct
shape change
*The photo above shows the state after the change.
*Inner tray and inner cover were removed for better visibility.
heat-insulating sheet (No.4, No.5, No.6, No.7)
6) Cooling fan change (No.8)
Q’
Com
bi
p
ati-
(Revised issue 1)
Service Bulletin Ref. No.
<Date> February 28, 2012
2KZ-0023 (C014)
(Page.2/4)
ty
Old New Old New
1 1 X X
lity
Remarks
32 pcs. in total
302K002800
1
2K002800
302K002810
2
2K002810
302K094310
3
2K094310
302K002D10
4
2K002D10
302K002E50
5
2K002E50
302K002E60
6
2K002E60
302K002E70
7
2K002E70
302LC94380
8
2LC94380
302K046170
9
2K046170
Old Part
No.
No.
(-->)
*The table above shows the parts not listed in the Parts List also. The new and old type parts were newly registered as service
parts due to the incompatibility.
New Part
No.
302MV33020
2MV33020
302MV33030
2MV33030
---- PARTS FAN MOTOR SP 1 - X -
---- SPONGE IH COVER 1 - X -
---- SHEET DUCT IH A 1 - X -
---- SHEET DUCT IH B 1 - X -
---- SHEET DUCT IH C 1 - X -
302K994360
2K994360
302MV46540
2MV46540
DUCT CONTAINER B 1 1 X X
DUCT CONTAINER C 1 1 X X
PARTS FAN COOLING LSU
60 SP
WIRE IH-DLP FAN 1 1 X X
Description
KMC’s Classification Entire Stock Rework In-Field modification at next visit
In-Field modification by case No modification necessary
Field Measure:
Field modification is not possible since the frame must be changed.
Make sure to use the old type parts for the machine before the change and the new type parts for the machine
after the change.
Serial Nos. of the Affected Machines: Planned from the January 2012* production
*The above is the plan at the present moment. Please note that this information is subject to change.
European Service & Development Center (ESDC)
KYOCERA MITA Europe B.V.