Kyocera FS-6970 Service Bulletin 2J5 0014 B336
PS data
corrected.
SYSTEM
2J5_300000
5005 4c40 005.005
2011/8/24 004.003
Service Bulletin Ref. No.
Subject
(Page.1/3)
2J5-0014 (B336)
<Date> October 27, 2011
Firmware Upgrade (System: Ver.005.005)
FS-6970DN_05.00.0010_(2011-08-24)
Model
FS-6970DN
Topic
The firmware was upgraded as follows.
Content of Changes
No.
Item Details
1
Measures against the abnormal
Helvetica-Bold fonts with a certain
2
Measures against the F000 error
with a PS data
The Helvetica-Bold font was abnormally output when
printing a certain PS data. Therefore, this was
The F000 error appeared when printing a certain PS
data. Therefore, this was corrected.
Ctl No.
605467
605468
TP-090399
510292
TP-10-232,
#115873
FW
SYS
SYS
<For more details, please refer to the next pages.>
Program No.
ENGINE 2J5_1000006002 8B90 006.002 2011/6/8 - -
For the KM sales companies, it is possible to download the firmware at the download center on the ESDC.net.
When upgrading the firmware or replacing a board, please upgrade all kinds of the firmware to the latest version at the same
time.
Check
sum
Ver. Status Date
KMC’s Classification Entire Stock Rework In-Field modification at next visit
In-Field modification by case No modification necessary
Field Measure: Please upgrade the firmware when the problem described above arises.
Serial Nos. of the Affected Machines: After using up the old stock
Current
Ver.
Remark
-
← New upgrade
European Service & Development Center (ESDC)
KYOCERA MITA Europe B.V.
printing a certain data
inserted
SEH is installed
corrected.
this
was corrected.
(
Offending Command
error)
file
PS dat
a
corrected.
printing a certain PDF file
corrected.
PCL data
Therefore, this
was corre
cted.
corrected
.
certain PDF fi
le
Service Bulletin Ref. No.
<Date> October 27, 2011
Content of Changes
No.
Item Details
3
Measures against the
“undefined” error when
------------------
(Page.2/3)
2J5-0014 (B336)
Ctl No.
601541
TP-10-287,
#1140708
FW
SYS
4
Measures against the PDF
output failure
Measures against the print
5
failure with a certain file if the
KYOmulticode CF card was
6
Measures against the USB
direct print error
Measures against the failure
7
when the optional NIC from
8
Measures against the PCLXL
error with a certain file
9
Measures against the slow
print in a certain environment
10
Measures against the print
failure with a certain PS data
11
Measures against the F030
error with a certain PDF file
12
Measures against the Code39
barcode print failure when
directly printing a certain PDF
13
Measures against the left side
image dropout with a certain
The PDF direct printing failure with a certain file was
corrected.
A certain file was not correctly printed if the KYOmulticode
CF card was inserted. Therefore, this was corrected.
------------------
The PCL XL error might appear when printing a certain PDF
file via the optional NIC from SEH. Therefore, this was
------------------
The response of the print completion became slow when
intermittently printing in a certain environment. Therefore,
---------------
The F030 error appeared when printing a certain PDL file
with the KPDL_mini_driver. Therefore, this was corrected.
The Code39 barcode was not printed and only letters were
printed. Therefore, this was corrected.
The left side of image dropped out and the character pitch
was widened with a certain PS data. Therefore, this was
601552
TP-10-031,
ESDC#003
510583
TP-10-022
546250
TP-10-203
NP-Z10068
511441
TP-10-073,
#915859,
602199
TP-11-064
NP-z11017
602944
TP-11-058,
#1201170
600984
P-11-058,
#1201170
434632
TP-090360
NP-Z09073
498234
TP-10-198
#1079465
434506
TP-090331
ID_#404979
SYS
SYS
SYS
SYS
SYS
SYS
SYS
SYS
14
Measures against the
processing lockup when
15
Measures against the PDF
output failure
16
Measures against the shifted
character pitch with a certain
17
Measures against the duplex
print failure with a certain file
18
Measures against the system
error when directly printing a
19
Measures against the letter
dropout with a PCL data
The processing lockup occurred when printing a certain
PDF file after the MacOS 10.6 Preview. Therefore, this was
Printing of a certain PDF data was paused and stopped at
standby. Therefore, this was corrected.
The wrong character pitch caused page layout failure and
undesired output when printing a certain PCL data.
Upper part of the image on the back side was not printed
when printing a certain file in duplex. Therefore, this was
---------------
Some letters dropped out when printing a certain PCL data.
Therefore, this was corrected.
KYOCERA MITA Europe B.V.
European Service & Development Center (ESDC)
560546
TP-10-252,
UTS-10-039
499905
TP-10-120,
NP-Z10033
601547
TP-10-265
NP-Z10085
510339
TP-10-164,
NP-Z10059
499889
TP-10-037
#922548
510306
TP-10-257,
#1127888
SYS
SYS
SYS
SYS
SYS
SYS
Loading...