Kyocera FS-6970 Service Bulletin 2F8 035

Service Bulletin

SB Number:

Subject:

SB 2F8-035

Firmware upgrade (Grey background on the print-out)

Creation Date: 24/08/2011

Model: FS-2000DN/3900DN/4000DN/6950DN

Item Contents

Grey background on
the print-out.

Firmware

Type Program No. Check SUM Version Status Date Applicable model(s)

SYSTEM 2F8_3000009001 E05F 009.001 13/03/2008 FS-2000DN

ENGINE 2F8_1000014001 AD2C 014.001 19/08/2011 FS-2000DN

SYSTEM 2F9_3000010004 5204 010.004 08/08/2007 FS-3900DN

ENGINE 2F9_1000015001 17AC 015.001 19/08/2011 FS-3900DN

SYSTEM 2F9_3000010.004 5204 010.004 08/08/2007 FS-4000DN

ENGINE 2GA_1000013001 799D 013.001 19/08/2011 FS-4000DN

SYSTEM 2F7_3000007003 5616 007.003 08/08/2007 FS-6950DN

ENGINE 2F7_1000015001 5F61 015.001 22/06/2011 FS-6950DN

Phenomenon
When the toner level is low, the message “Replace toner” or “Low toner” appears. After
relling the toner, grey background may appear on the print-out.

Solution

The amount of relled toner has been changed. Please note that the message
“Replace toner” has been discontinued.

Classication

Field measure When the above mentioned phenomena occur, please upgrade the rmware to the latest

Serial numbers of affected machines

Type Serial number

FS-2000DN/3900DN/4000DN/6950DN July 2011 production.

The above mentioned changes have been applied to machines produced after the above mentioned production date.

KMIS Service Department, Kyocera Mita Europe B231-B232 / SB 2F8-035

Entire stock rework

version.

In-eld modication at next visit

Page 1 of 1

In-eld modication by case

X

No modication necessary