Kyocera FS-6970 Service Bulletin 2G3 001
Service Bulletin
SB Number:
Subject:
SB 2G3-001
The Frame left and Plate eject A3 have been changed
Creation Date: 10/01/2012
Model: FS-6950DN/6970DN
Contents of changes
To make the parts common with other models, the shape of the Frame left and Plate eject A3 has been changed.
Plate eject A3
X
Frame left viewed from X
Change 1
Change 3
Change 2
Frame left
Latest type of the Frame left
Change 1: The Protrusion at the insert point of the Lock cove top L, has been cut.
Change 2: The height of the Boss has been changed.
Cut
Lowered by 1.8mm
KMIS Service Department, Kyocera Mita Europe B459 / SB 2G3-001
Page 1 of 2
Service Bulletin
Change 3: The Section where the Lever EF has been attached, has been changed.
: Protrusion has been extended by 1.5mm.
: The corners have been changed from
round to chamfer shape.
Latest type of the Plate eject
Change 1: The chamfer shape has been applied.
Old condition
Parts
No. Old Parts
No.
1 302F902011
2F902011
2 302F728100
2F728100
Classication
Field measure When replacing the Frame left and Plate eject A3, please use the latest type. Both the old and
New Parts
No.
302F902511
2F902511
302F728101
2F728101
Entire stock rework
new type of the Plate eject A3 can be used in combination with the old type of the Frame left.
Description Q’TY Interchange-
FRAME LEFT 1 1 O X
PLATE EJECT A3 1 1 X O
New condition
In-eld modication at next visit
Chamfer shape has been applied
Old New Old New
In-eld modication by case
X
ability
No modication necessary
KMIS Service Department, Kyocera Mita Europe B459 / SB 2G3-001
Page 2 of 2
Loading...