Kyocera FS-6970 Service Bulletin 2J5 0012 B112

Q’

Com

bi

p

ati-

(

GUIDE VERTICAL

)

↑

marked

in circle

A

Content of the

service

bulletin

SB

-

The parts can be fitted if part

A

is

Service Bulletin Ref. No.

Subject

(Page.1/2)

2J5-0012 (B112)

<Date> May 6, 2011

Measure against the Abnormal Sound from the Exit Section
(Service Parts Information)

Model

FS-6950DN, FS-6970DN

Topic

The measure against the abnormal noise (creaking noise) generated by contact of the FD unit frame with the
shaft of the exit roller was informed by the service bulletin SB-2J5-0010-B042. This time, the service part for field
measure was registered. Additionally, the new FD units with the BUSH EXIT were also registered.

Measure

The BUSH EXIT (No.1) was added between the frame and the exit roller shaft so that the frame and the shaft will
not contact each other.

Fitting position ↓

Center of FD ASSY

Frame

Field Measure

The part for field measure is now registered which can be fitted without removing the FD unit as the shape was
changed by eliminating bosses and bumps.

For production: BUSH EXIT (302J528061) For service: BUSH EXIT B (informed this time)

Old Part

No.

1 ----------

No.

Shape changed where

New Part

No.

302J528070

2J528070

cut obliquely.

A

Center of GUIDE VERTICAL

Description

BUSH EXIT B - 1

KYOCERA MITA Europe B.V.

European Service & Development Center (ESDC)

B

[Note]
The BUSH EXIT B cannot be installed to FS­6950DN before the GUIDE VERTICAL was
changed which interferes the guide when fitting.
Use the BUSH EXIT for production or the FD
ASSY SP with the part installed.

The part can be installed to FS-6950DN with
change of the GUIDE VERTICAL implemented
as informed by the service bulletin SB-2F7­0022-8806.
(FS-6970DN since the first production)

2F7-0022-8806

A: Obliquely cut
B: Height reduced by 2 mm

ty

Old New Old New

lity

- O

Remarks

Q’

Com

bi

p

ati-

Service Bulletin Ref. No.

(Page.2/2)

2J5-0012 (B112)

<Date> May 6, 2011

KMC’s Classification Entire Stock Rework In-Field modification at next visit

In-Field modification by case No modification necessary

Field Measure: Please apply the BUSH EXIT (No.1) when the problem described above occurs. When

reassembling the FD unit, please remind [Check point after reassembling the FD unit]
above.

Serial Nos. of the Affected Machines: As this is a service part, the serial numbers information is not

available.

[Assembly items informed by the service bulletin SB-2J5-0010-B042]

Old Part

No.

2

3

4

"+" Mark at the head of the description indicates that it is a component part.

The latest last digit of the part code for the parts No.2 to 4 was updated as follows. The parts before these latest numbers are
also same in functionality since the change was for common use of the parts with other models.

(No.2) 302F794025  302F794026
(No.3) 302G394055  302G394056
(No.4) 302J594072  302J594073

No.

302F794024

2F794024

302J594071

2J594071

----------

New Part

No.

302F794025

2F794025

302J594072

2J594072

302J528061

2J528061

Description

FD ASSY SP 1 1 X O FS-6950DN

FD ASSY SP 1 1 X O FS-6970DN

+BUSH EXIT - 1 - O

ty

Old New Old New

lity

Remarks

European Service & Development Center (ESDC)

KYOCERA MITA Europe B.V.