Kyocera FS-2100, FS-4100, FS-4200, FS-4300 Service Bulletin 2LV 007

Service Bulletin

Page 1/1

C288 / SB 2LV-007

SB Number:

Subject:

SB 2LV-007

Firmware upgrade (Main v004.008)

Creation Date: 14/06/2013

Model: FS-2100D/2100DN/4100DN/4200DN/4300DN

Contents of changes

1 Phenomenon

Error code F245/F24B/F000 may occur.

Cause

During communication error recovery, the message “Error occurs“may be displayed.

2 System error F245 may appear, during synchronization (PCLe Link-up) between two IC’s.

3 XPS le format is now supported.

4 To comply with the BAM regulation, the engine recovery control when receiving data from the Network print

protocol port has been changed.

5 Full page print mode is now supported.

6 The message “Replace MK “ may appear after 200K print-outs.

7 The machine may be locked, when printing macro data from certain host systems.

8 Horizontal lines may partially appear in shaded images with screens in the illustration, when printing from

Illustrator on Macintosh computers.

9 Only the from may be printed (Without data), when using form overlay.

10 Macro data may be printed as text, when printing from applications after executing PCL macro saved on

CF cards.

11 Certain single sheet prints may be printed on multiple pages.

12 System error F245 may appear, when receiving certain E-mails.

13 Line feed position may shift to multiple pages, when sending certain data after setting FRPO P3 to “2”.

14 PCL macro data may not be saved to the HDD, when registering continuously.

15 Text may drop out when printing certain XPS data.

16 The print out may appear abnormal, when printing certain PCL data.

Firmware

Type Program No. Check SUM Version Status date Applicable model(s)

MAIN 2L2_3F00004008 ---- 004.008 19/10/2012 FS-2100D New upgrade

MAIN 2LV_3F00004008 ---- 004.008 19/10/2012 FS-2100DN/4100DN/

4200DN/4300DN

ENGINE 2LV_1000001079 ---- 001.079 ---------- FS-2100D/2100DN/

4100DN/4200DN/4300DN

Classication

Field measure To implement the changes mentioned in this service bulletin, please upgrade all the rmware to

Entire stock rework

the latest version at the same time.

KDIS Service Department, KYOCERA Document Solutions Europe B.V.

In-eld modication at next visit

In-eld modication by case

New upgrade

No modication necessary