Kyocera FS-3540, FS-3640MFP Service Bulletin 2MC 0001 B202
[Replace toner] or [Low toner] app
ears.
566318
<Change> Retrial time:
334msec
484msec
564791
Also, please explain
the
users
the content
of <Note>
above.
Check
SUM
Status
Date
Current
Ver.
2011/6/1
0
2011/5/2
5
Option
al language
BR
Service Bulletin Ref. No.
Subject
(Page.1/1)
2MC-0001 (B202)
<Date> July 11, 2011
Firmware Upgarde (Engine: Ver.002.001, Scanner: Ver.002.001)
FS-3540MFP_FS-3640MFP_v03.00.0010_(2011-07-11)
Model
FS-3540MFP, FS-3640MFP
Topic
The firmware was upgraded as follows.
Content of Changes
No. Item Details
1 Measures against the
gray background
2 Measures against
the DP non-feed jam
(JAM9000)
The gray background might appear when refilling toner.
The tolerance for gray background will be improved by regulating
amount of the toner refilled when the toner cartridge is installed after
The DP non-feed jam might occur in case that the timing switch to detect
the original was delayed due to its slippage. Therefore, the retrial time
for the timing switch was changed.
<Note>
The following has been changed since this engine firmware. Please explain it to the users.
“The toner container which displayed <Replace toner> once cannot be reused even if you reinstall it to the
machine. Please replace it with a new toner container.”
CTL.
FW
ENGINE
SCANNER
Program No.
ENGINE 2MC_1000.002.001 F709 002.001
MAIN 2MC_2F00. 001.041 001.041 - - FS-3540MFP
MAIN 2MD_2F00. 001.041 001.041 FS-3640MFP
SCANER 2MC_1200.002.001 FBB1 002.001
2MC_81BR.001.004 001.004 - - For KMBR
FAX BOOT/APL 2KX_5500.005.003 005.003 - FS-3640MFP
For the KM sales companies, it is possible to download the firmware at the download center on the ESDC.net.
When upgrading the firmware or replacing a board, please upgrade each kind of the firmware to the latest version at the same
time.
Ver.
001.008
001.017
Remark
←←←←
New upgrade
←←←←
New upgrade
KMC’s Classification Entire Stock Rework In-Field modification at next visit
In-Field modification by case No modification necessary
Field Measure: Please upgrade the firmware when the problem described above arises.
Serial Nos. of the Affected Machines: Scanner: From available timing in June 2011 production*
Engine: Planned from the May 2011 production*
*The above is the plan at the present moment. Please note that this information is subject to change.
European Service & Development Center (ESDC)
KYOCERA MITA Europe B.V.
Loading...