Kyocera FS-3540, FS-3640MFP Service Bulletin 2MC 002

Service Bulletin

SB Number:

Subject:

SB 2MC-002

Firmware upgrade (Main v004.006/004.004 and MMI v004.008)

Creation Date: 28/02/2012

Model: FS-3540MFP/3640MFP, C2526MFP/2626MFP

Contents of changes

1 The Maintenance mail can now be sent when the Machine is in sleep mode. (FS-C2526MFP/2626MFP only)

2 The Catalan Optional panel language is now supported.

3 The Gloss mode option has been renamed as follows: (FS-C2526MFP/2626MFP only)

From High/Low to On/Of

4 The MP Paper size and Media type selection screen have been improved as follows:

1. The MP Tray paper size and Media type can now be changed at the Paper selection screen of the
Copy screen.

2. The MP tray paper size and Media type can now be changed at the Paper empty screen.

5 System error may appear when printing, while storing about 4.000 lines of PCL Macro data.

6 Scan may fail when scanning a large number of originals, after starting up the Computer.

7 The acquisition of the Copy counter information may fail, when using the HyPAS application (Pcounter).

8 The message “Cannot recognize the ID card reader” may be displayed as the sub message, even if the ID

card reader is disconnected when executing Equitrac application activation.

9 Sender information may be skipped from the Recipients output data, when sending the Fax if the

Job Account setting is ON, while the name is not dened at the extensible authentication.

10 Error code CF264 may appear, when printing PCL macro data from CF cards.

11 LF code may be ignored during SMB protocol printing.

12 The weekly timer may not function, when the Summer time (Daylight saving time) has been activated.

13 The Command Center settings may not be changed.

Classication

Field measure When the above mentioned phenomena occur, please upgrade the rmware to the latest

Firmware for the FS-3540MFP/3640MFP

Type Program No. Check SUM Version Status Date Applicable model(s)

MAIN 2MC_2F00004004 ---- 004.004 25/10/2011 FS-3540MFP

MAIN 2MD_2F00004004 ---- 004.004 25/10/2011 FS-3640MFP

MMI 2MC_7000004008 ---- 004.008 ---------- FS-3540MFP/ 3640MFP

ENGINE 2MC_1000003002 ---- 003.002 ---------- FS-3540MFP/ 3640MFP

SCANNER 2MC_1200003001 ---- 003.001 ---------- FS-3540MFP/ 3640MFP

FAX BOOT/APL 2KX_5500007001 ---- 007.001 ---------- FS-3640MFP

Note: Please upgrade all the rmware at the same time.

KMIS Service Department, Kyocera Mita Europe B464-B465/ SB 2MC-002

Entire stock rework

version.

In-eld modication at next visit

Page 1 of 3

In-eld modication by case

X

No modication necessary

Service Bulletin

Firmware for the FS-C2526MFP/2626MFP

Type Program No. Check SUM Version Status Date Applicable model(s)

MAIN 2M8_2F00004006 ---- 004.006 16/11/2011 FS-C2526MFP

MAIN 2M9_2F00004006 ---- 004.006 16/11/2011 FS-C2626MFP

MMI 2M8_7000004008 ---- 004.008 ---------- FS-C2526MFP/2626MFP

ENGINE 2KW_1000011002 ---- 011.002 ---------- FS-C2526MFP/2626MFP

SCANNER 2M9_1200003001 ---- 003.001 ---------- FS-C2526MFP/2626MFP

FAX BOOT/APL 2KX_5500007001 ---- 007.001 ---------- FS-C2626MFP

Note: Please upgrade all the rmware at the same time.

4. The MP Paper size and Media type selection screen have been improved.

1. The MP Tray paper size and Media type can now be changed at the Paper selection screen of the
Copy screen. Previously the MP Tray paper size and Media type could only be set at the System menu.

Select [Paper Selection] at the Copy screen.

Change [Paper size] and [Media Type].

Select [MP tray].

KMIS Service Department, Kyocera Mita Europe B464-B465/ SB 2MC-002

Page 2 of 3