3640MFP_v03.00.0030_(2011
Service Bulletin Ref. No.
Subject
(Page.1/2)
2MC-0003 (B379)
<Date> November 14, 2011
Firmware Upgrade (Engine: Ver.003.002; FAX: Ver.007.001;
Scanner: Ver.003.001)
Model
FS-3540MFP, FS-3640MFP
Topic
The firmware was upgraded as follows.
Content of Changes
No. Item Details
Measures against the
1
erroneous display of
“Toner low” message
2 Change of the SC5100
error detection
3
Change of the a
waiting time
The toner low detection was changed according to the residual amount
since “Toner low” might be displayed right after toner container was
installed.
(Indication of “Toner low” message is based on the count where the toner
low is regularly detected. However, if the amount of residual toner inside
the toner container is high, the count to show this message will be
The SC5100 error detection was changed to the same manner as for the
conventional models.
The waiting time before the blackness reference data reception was
changed from 50msec to 150msec.
*If the mode shift is not enabled, unnecessary lamp ON/OFF will be
<Note>
The following change was implemented since the engine firmware of this version. Please explain it to your
users.
“The toner container once showed <Replace toner> cannot be reused even if reinstalling it to the machine.
Please replace it with a new toner container.”
Program No.
Check
SUM
Ver. Status Date
Current
Ver.
Remark
CTL FW
575685
ENGINE
571973
ENGINE
571255
SCA
ENGINE 2MC_1000003002 83E0 003.002 2011/10/14 002.001
MAIN 2MC_2F00003024 003.024 - - FS-3540MFP
MAIN 2MD_2F00003024 003.024 - FS-3640MFP
SCANER 2MC_1200003001 A087 003.001 2011/8/10 002.001
MMI 2MC_7000003020 - 003.020 - -
Optional language
BR
FAX BOOT/APL 2KX_5500007001 - 007.001 - 006.001
For the KM sales companies, it is possible to download the firmware at the download center on the ESDC.net.
When upgrading the firmware or replacing a board, please upgrade all kinds of the firmware to the latest version at the same
time.
2MC_81BR001006 - 001.006 - - For KMBR
European Service & Development Center (ESDC)
KYOCERA MITA Europe B.V.
←←←← New upgrade
←←←← New upgrade
←←←← New upgrade
Service Bulletin Ref. No.
KMC’s Classification Entire Stock Rework In-Field modification at next visit
Field Measure: Please upgrade the firmware when the problem described above arises.
Serial Nos. of the Affected Machines:
FAX: After using up the old stock; Scanner: To be informed later
Engine: From available timing in the October 2011* production
(Page.2/2)
2MC-0003 (B379)
<Date> November 14, 2011
In-Field modification by case No modification necessary
Also, please explain your users the content of <Note> above.
*The above is the plan at the present moment. Please note that this information is subject to change.
European Service & Development Center (ESDC)
KYOCERA MITA Europe B.V.