Kyocera FS-1120, FS-1028, FS-1320, FS-1370, FS-1128MFP PARTSLIST

(Page.1/1)

Service Bulletin Ref. No. COM-0200 (A324)

[Service Information] <Date> October 5, 2010

Subject

Note when replacing/reassembling HOLDER DU and STAY DU FS-1300D, FS-1350DN, FS-1120D, FS-1320D, FS-1370DN,

Model

FS-1028MFP/KM-2810, FS-1128MFP/KM-2820

HOLDER DU (No.2) and STAY DU (No.3) are no more supplied as individual parts because adjustment is necessary after assembling them. If HOLDER DU/STAY DU must be replaced, please use the assembly parts (No.1) instead of them.

[Precaution] In case of replacing/reassembling HOLDER DU/STAY DU individually, the paper skew may occur

depending on adjustment.

PULLEY MID(Y)

HOLDER DU ASSY (No.1)

No.

Parts with “O” indicates regular maintenance parts. "+" Mark at the head of the description means it is a components parts.

*1: Assembly parts that contains each 1 pce of HOLDER DU (No.2), STAY DU(No3), SHAFT PULLEY (X in the above figure:

Old Part

No.

1 ------------

2FM21010

5MVX861XB001

2FM21020

5MML821SD009

302FM0242_) and 2 pcs of PULLEY MID(Y: 2FM0221_)

New Part

No.

302FM94060

2FM94060

------------ +HOLDER DU - -

------------ +STAY DU - -

PARTS HOLDER DU ASSY SP

Description

Q’ty

Old New Old New

- 1

KMC’s Classification 

Entire Stock Rework In-Field modification at next visit In-Field modification by case No modification necessary

Field Measure:

Please use the assembly parts (No.1) if HOLDER DU (No.2) and STAY DU (No.3) must be replaced. And, please don't remove HOLDER DU and STAY DU individually. (Please don't reassemble them in the field.) Serial Nos. of Affected Machine: ---------------------------------------

STAY DU (No.3) -->

Individual part is not supplied.

SHAFT PULLEY (X)

HOLDER DU (No.2)

--> Individual part is not supplied.

Com

pati

lity

- O O

- - -

SP Remarks

Supply discontinuance as individual parts

KYOCERA MITA CORPORATION