Kyocera FS-1120, FS-1320, FS-1370 Service Bulletin 2LZ-001
Service Bulletin
SB Number:
Subject:
SB 2LZ-001
Firmware upgrade (The transfer ON timing has been changed)
Creation Date: 25/08/2010
Model: FS-1120D/1320D
The transfer ON timing of the second side leading edge has been adjusted to improve the duplex printing.
Firmware
Type Program No. Check SUM Version Applicable models Status Date
SYSTEM 2LZ_3000002001 9497 002.001 FS-1120D/1320D 10/02/2010
ENGINE 2LY_1000002001 8a73 002.001 FS-1120D 29/03/2010
ENGINE 2LZ_100002001 576b 002.001 FS-1320D 29/03/2010
Classication
Field measure Please upgrade the rmware to the latest version to implement the above mentioned changes.
Entire stock rework
In-eld modication at next visit
In-eld modication by case
No modication necessary
Serial numbers of affected machines
Type Serial number
FS-1120D/1320D April 2010 production.
The above mentioned changes have been applied to machines produced after the above mentioned production date.
KMIS Service Department, Kyocera Mita Europe A138 / SB 2LZ-001
Page 1 of 1
Loading...