Kyocera FS-1120, FS-1320, FS-1370 Service Bulletin 2LY-002
Service Bulletin
SB Number:
Subject:
SB 2LY-002
Firmware upgrade (Black streak on the print-out)
Creation Date: 30/09/2010
Model: FS-1120D/1320D
Item Contents
Black streak on the print-out. The vertical black streak may appear 1-2mm from the left edge of the print-out,
due to the incorrect register value for the laser scanner. Therefore the register
value has been corrected.
Firmware
Type Program No. Check SUM Version Status Date Applicable Model
SYSTEM 2LZ_3000003002 4297 003.002 23/08/2010 FS-1120D/1320D
ENGINE 2LY_1000003001 3365 003.001 08/07/2010 FS-1120D
ENGINE 2LZ_1000003001 106f 003.001 08/07/2010 FS-1320D
Classication
Field measure When the above mentioned phenomenon occurs, please upgrade the rmware to the latest
Entire stock rework
version.
In-eld modication at next visit
In-eld modication by case
No modication necessary
Serial numbers of affected machines
Type Serial number
FS-1120D Q5Y0824563
FS-1320D Q630826686
Machines produced after the above mentioned serial numbers, should not have the above mentioned phenomena.
KMIS Service Department, Kyocera Mita Europe A304 / SB 2LY-002
Page 1 of 1
Loading...