Kyocera FS-1120, FS-1320, FS-1370 Service Bulletin 2LZ-005
Service Bulletin
SB Number:
Subject:
SB 2LZ-005
Paper empty mis-detection when the paper cassette is full
Creation Date: 10/01/2012
Model: FS-1100/1300D/1350DN/1120D/1320D/1370DN
Phenomenon Paper empty may be mis-detected, if the Paper cassette is fully loaded with paper.
Cause The leading edge of the Actuator may be caught by the paper.
Solution 1. The angle of the Actuator stoppage has been changed.
2. Due to the above mentioned change, the shape of the Plate cover DU has been changed (To
prevent interference by the Cover DU)
The Actuator has been changed
New condition
0.8mm 10° lowered
After
Paper feed
direction
The Plate cover DU has been changed
Old condition
Parts
New condition
Cover DU
Before
Paper
Actuator
Actuator interfered
by the Cover
Part has been cut
No. Old Parts
No.
1 302LZ06010
2LZ06010
2 302HS94330
2HS94330
KMIS Service Department, Kyocera Mita Europe B443 / SB 2LZ-005
New Parts
No.
302LZ06011
2LZ06011
302HS94331
2HS94331
Description Q’TY Interchange-
ability
Old New Old New
ACTUATOR EMPTY A 1 1 O X
PARTS PLATE COVER DU ASSY SP 1 1 X O
Page 1 of 2
Service Bulletin
Classication
Field measure The old type of the Cover DU interferes with the latest type of the Actuator. Therefore use the
Serial numbers of affected machines
Type Serial number
FS-1100/1300D/1350DN/1120D/1320D/1370DN November 2011 production.
The above mentioned changes have been applied to machines produced after the above mentioned production date.
Entire stock rework
latest type of the Cover DU (Parts plate cover DU assy SP) when replacing the Actuator with
the latest type.
In-eld modication at next visit
In-eld modication by case
X
No modication necessary
KMIS Service Department, Kyocera Mita Europe B443 / SB 2LZ-005
Page 2 of 2
Loading...