Kyocera FS-1120, FS-1028, FS-1320, FS-1370, FS-1128MFP Service Bulletin 2LY-003

Service Bulletin

SB Number:

Subject:

SB 2LY-003

Replacing/Re-assembling the Holder DU and Stay DU

Creation Date: 16/11/2010

Model: FS-1120D/1300D/1320D/1350DN/1370DN, FS-1028MFP/1128MFP

The Holder DU and Stay DU will no longer be supplied as individual parts since the paper may feed a skewed,
when the adjustment is not performed after replacing one of the above mentioned parts individually. Therefore

please use the Parts holder DU assy SP (302FM94060), when replacing the Holder DU or Stay DU.

Above view of the machine

Old condition

Pulley MID

Stay DU

New condition

Parts holder du assy SP

Holder DU

Parts

No. Old Parts

No.

1 ------------ 302FM94060

2 2FM21010

5MVX861XB001

3 2FM21020

5MML821SD009
Part notes: (*1): This Assembly part contains the Holder DU (1 piece), the Stay DU (1 piece), the Shaft pulley_
302FM02421 (1 piece) and the Pulley MID_2FM02210 (2 pieces)

Classication

Field measure When replacing the Holder DU and Stay DU, please use the Parts holder DU assy SP

(302FM94060). Do not replace the Holder DU and Stay DU individually. Under this condition,
a skewed feeding of the paper may occur.

New Parts
No.

2FM94060

------------ +HOLDER DU - - - - -

------------ +STAY DU - - - - -

Entire stock rework

Description Q’TY Interchange-

PARTS HOLDER DU ASSY SP (*1) - 1 - O O

In-eld modication at next visit

Shaft pulley

In-eld modication by case

ability

Old New Old New

No modication necessary

X

SP

Serial numbers of affected machines

Type Serial number

FS-1120D/1300D/1320D/1350DN/1370DN, FS-1028MFP/1128MFP Not available

KMIS Service Department, Kyocera Mita Europe A324 / SB 2LY-003

Page 1 of 1