Kyocera FS-1120, FS-1320, FS-1370 Service Bulletin 2LZ 0005 B100

certain data

Subject

Service Bulletin Ref. No.

<Date> April 14, 2011

Upgrade of the System Firmware (Ver.004.001)

FS-1120D_FS-1320D_04.00.0010_(2011-01-07)

(Page.1/2)

2LZ-0005(B100)

Model

FS-1120D, FS-1320D

Topic

The system firmware was upgraded as follows.

Content of Changes

No. Item Details

Change of the Digital Dot Coverage display on the status page

2 Measure against the

error with a certain PDF data printing

3 Measure against the

print failure with a

4 Measure against

the images overlapping failure

The term used on the service status page was changed from "Digital Dot Coverage" to "Print Coverage".

- The coverage is simply converted with the area image ratio based on the current dot number data so that the accuracy as the reference value of the toner consumption can be improved.

Precaution)

- When upgrading the firmware, the Digital Dot Coverage data will be reset due to the different way of calculation.

If you need old print coverage report, please print out Service Status Page

before updating the firmware.

KPDL error (Undefined) might occur with a certain PDF data. Therefore, this was corrected.

□ (check box) was not printed and the printing position of X (cross mark) was also shifted with a certain data. Therefore, this was corrected.

Images were partially overlapped with a certain PDF data. Therefore, this was corrected.

CTL No. FW

527894

505177

TP-080086

#494191

521003

TP-080049

505183

TP-080006

#335955

MAIN

5 Measure against the

garbled letters with a certain CAD file

6 Measure against the

disordered image with a certain PDF file

7 Measure against the

image dropout in the PS output

Letters were partially garbled depending on the output size with a certain CAD file. Therefore, this was corrected.

Image might be disordered and KPDL error occurred when printing a certain PDF file. Therefore, this was corrected.

The left edge of image dropped out and character pitch got too wide in PS data output. Therefore, this was corrected.

European Service & Development Center (ESDC)

KYOCERA MITA Europe B.V.

510581

TP-080104,

#560940

510509

TP-090384

510368

TP-090331

ID_#404979

MAIN



FS-1120D

Service Bulletin Ref. No.

Program No. Check SUM

MAIN 2LZ_3000004001 BD97 004.001 2011/1/7 003.002

ENGINE 2LZ_1000004001 4b10 004.001 2010/11/26 - FS-1320D

ENGINE

For the KM sales companies, it is possible to download the firmware at the download center on the ESDC.net. When upgrading the firmware or replacing a board, please upgrade each kind of the firmware to the latest version at the same time.

2LY_1000004001

(Page.2/2)

2LZ-0005(B100)

<Date> April 14, 2011

Ver. Status Date Current Ver. Remark

New upgrade

FS-1320D

106f

003.001 - - FS-1120D

Field Measure: Please upgrade the firmware when the problem described above arises.

Serial Nos. of the Affected Machines: To be informed later

European Service & Development Center (ESDC)

KYOCERA MITA Europe B.V.