Kyocera FS-1120, FS-1320, FS-1370 Service Bulletin 2L0-003
Service Bulletin
SB Number:
Subject:
SB 2L0-003
Firmware upgrade (System v003.001)
Creation Date: 30/03/2011
Model: FS-1370DN
Contents of changes
1 The ARP table may be rewritten due to corrupt data.
2 The E-mail sending time may appear incorrect when sending the E-mail from the machine by SMTP.
3 The print out may take a long time, when the data contains macro data registered in CF cards.
4 The lines of text characters may be skipped when printing.
5 The font may appear garbled, when printing the PDF le directly from the machine.
6 The umlaut characters may not appear on the print-out, when printing the PDF le directly from the machine.
7 An error may occur, when printing the PDF le directly from the machine.
8 Character data may appear on the print-out instead of Code39 barcodes.
9 Black and white images may appear reversed on the print-out.
10 The following errors may occur when printing PDF les directly from the machine.
• System error.
• Processing lock-up.
• Error code F030.
11 The characters may appear overlapped when printing with macro commands.
12 The print-out of PDF les may be interrupted and stop, while the the machine appears to be waiting.
13 Error code F18C may occur when printing PS les.
14 Half of the print-out may be skipped, due to improper processing when sending the LDFN command by parallel
port.
15 Depending on the output size, the characters may appear blurred when printing CAD les.
16 The print out may take a long time, when the data contains the Big5 font registered in CF cards.
17 White spots may appear around the characters when printing.
18 The print speed has been improved.
19 The page layout may appear abnormal on the print-out.
20 The space may be skipped when printing PDF les directly from the machine.
Incorrect: Space has been skipped
X
21 The PS error may occur and printing may be iterrupted when printing data from Unix.
22 Garbled characters may appear on the print-out when the data contains certain types of the PJL (Printer Job
Language).
23 Offending Command error may be displayed, when printing the PDF le directly from the machine.
24 Polish text may not appear properly on the print-out, when printing the PDF le directly from the machine.
KMIS Service Department, Kyocera Mita Europe B064 / SB 2L0-003
Page 1 of 2
Correct: Space has not been skipped
Service Bulletin
25 Print failure of Code39 barcodes may occur, when printing the PDF le directly from the machine.
26 Print failure may occur when printing PCL data.
27 Lines may appear on the print-out, when printing the same 2 les continuously.
28 Print failure may occur, when using the KPDL (Auto) driver.
Firmware
Type Program No. Check SUM Version Status Date
SYSTEM 2L0_3000.003.001 98ac 003.001 27/12/2010
ENGINE 2L0_1000.002.003 1ded 002.003 22/06/2010
Classication
Field measure When the above mentioned phenomena occur, please upgrade the rmware to the latest
Serial numbers of affected machines
Type Serial number
FS-1370DN February 2011 production
The above mentioned changes have been applied to machines produced after the above mentioned production date.
Entire stock rework
version.
In-eld modication at next visit
In-eld modication by case
No modication necessary
X
KMIS Service Department, Kyocera Mita Europe B064 / SB 2L0-003
Page 2 of 2
Loading...