Kyocera FS-1120, FS-1030MFP, FS-1028, FS-1320, FS-1370 Service Bulletin 2LZ 0006 B443

...
etection
Q’
Com
bi
p
ati-
COVER DU
0.8 mm
After
10o
lowered
Paper feed
ing
Service Bulletin Ref. No.
Subject
(Page.1/2)
2LZ-0006 (B443)
<Date> December 17, 2011
Improvement of the Preventive Margin for the Paper D Actuator FS-1100, FS-1300D, FS-1350DN, FS-1120D, FS-1320D,
Model
FS-1370DN, FS-1110, FS-1028MFP, FS-1128MFP, FS-1024MFP, FS-1124MFP, FS-1030MFP, FS-1130MFP, FS-1035MFP, FS-1135MFP
Topic
If the cassette is fully filled with paper, the leading edge of the actuator might be caught up by the paper and paper empty might be erroneously detected. Therefore, the angle of the actuator stoppage was changed in order to improve the margin. Due to the change above, the shape of the PLATE COVER DU was changed in order to prevent interference by the COVER DU.
Content of Changes
1 Shape change of the (Change of the actuator stoppage angle)
2 Change of the
No.
1
2
Old
Old Part
No.
302LZ06010
2LZ06010
302HS94330
2HS94330
ACTUATOR EMPTY A
PLATE COVER DU
New Part
No.
302LZ06011
2LZ06011
302HS94331
2HS94331
New
Cut out portion
Description
ACTUATOR EMPTY A 1 1
PARTS PLATE COVER DU ASSY SP
ty
Old New Old New
1 1
Actuator
O X
X O
After
Before
Paper
Actuator interfered by the cover
lity
Remarks
direction
European Service & Development Center (ESDC)
Service Bulletin Ref. No.
KMC’s Classification Entire Stock Rework In-Field modification at next visit
Field Measure:
Please use the new type of the COVER DU (No.2) when replacing the actuator with the new type of the actuator (No.1) since the old COVER DU interferes with the new actuator. Serial Nos. of the Affected Machines: Planned from the November 2011* production
(Page.2/2)
2LZ-0006 (B443)
<Date> December 17, 2011
In-Field modification by case No modification necessary
*The above is the plan at the present moment. Please note that this information is subject to change.
European Service & Development Center (ESDC)
Loading...