Kyocera FS-1020, FS-1120, FS-1025, FS-1125MFP Service Bulletin 2M4 0002 D086
(Page.1/2)
Subject
Notes on Removal of the RIGHT/LEFT UPPER COVER
Model l:
FS-1020MFP, FS-1220MFP, FS-1120MFP, FS-1320MFP,
FS-1025MFP, FS-1125MFP, FS-1325MFP
LEFT UPPER COVER
RIGHT UPPER COVER
(Left side frame base)
(Right side frame base)
X
Y
X (COVER inner side)
Y (COVER inner side)
Do not open old
COVER too much
Do not open old
COVER too much
Hook
Broken part
Z: Broken part
Hook
RIGHT UPPER COVER
Frame base
(View from machine top side)
Cross section of Z
(Frame base broken) (After this change)
Broken
Curved
shape
added
New RIGHT UPPER COVER
Service Bulletin Ref. No. 2M4-0002 (D086)
[Service information] <Date> May 8, 2013
Topic
Please note that the RIGHT UPPER COVER or the LEFT UPPER COVER shall not be forcibly opened too much to
remove it while using the machine front side part as fulcrum. (Note 1)
(The frame base might be broken by the stress if opening the cover with excessive force.)
(Note 1) Both of the inner hooks of the cover can be released by opening the cover in the direction of the red arrow.
Curved shape was added to the RIGHT/LEFT UPPER COVER so that too much stress will not be applied to the
frame base when opening the cover. (For more details, please refer to the next page.)
(Main unit)
(Note 2) The yellow arrow in the figure indicates insert direction of the upper
hook. The figure above shows the state without the FRONT COVER.
KYOCERA Document Solutions Europe
Customer Services & Support Division (CSSD)
(Page.2/2)
<LEFT UPPER COVER (302M40403_)>
<RIGHT UPPER COVER (302M40402_)>
Curved
shape
added
Curved
shape
added
Service Bulletin Ref. No. 2M4-0002 (D086)
[Service information] <Date> May 8, 2013
[Change of the RIGHT/LEFT UPPER COVER]
New curved shape --- The part number (302M40402_/302M40403_) remains unchanged.
(Serial number information will not be available since this change will be applied after the old stock is used up.)
KYOCERA Document Solutions Europe
Customer Services & Support Division (CSSD)
Loading...