Kyocera CA02 User Manual

User Guide

Preface

Navigation bar

(Volume down button)

F (Power button)

Thank you for buying this product.
Before using the product, be sure to read "User Guide"
(this manual) to ensure correct use.

• Reproduction of the content of this manual in part or
in whole is prohibited.

List of Packaged Items

A set of Smile Zemi package is included (refer to the
attached document).

◎The battery is built into the product.
◎Illustrations in this manual are only for reference. They

may look different from the actual product.

Operating Instructions

■"User Guide" (This Manual)

Handles only basic operations for main features.

Regarding Notations Used in This Document

■Note on Button Illustrations

In this manual, buttons are simplified as shown below.

r (Volume up button)
l

C H N

1

■Description of Operations for Selecting

Actual screen

Item/Icon/Button etc.

Notations used for operation procedures in this manual
are as follows.

Description Explanation

Home screen →
[

] → [ ]

In sleep mode,

(Power

F

button)

• Tapping is to select a button or icon displayed on the
screen by lightly tapping it with your finger.

2

Tap " (Chrome)" at the bottom
of the home screen.
Tap [

]

In sleep mode, press F
(Power button).

■Notes on Illustrations/Screenshots

The illustrations and screenshots in this manual may
look different from the actual illustrations or screens.
Note that part of the screen etc. may be omitted.

Some icons
etc. are
omitted in this
manual.

Notations used in this manual

◎Descriptions of this manual is based on the product

switched to Android mode.

◎In this manual, the operations with horizontally oriented

screens are provided as examples. With vertically
oriented screens, descriptions for menu item/icon/on­screen button may be different.

◎Menu items, layers and icons described in this manual

may be different according to functions being used and
conditions.

◎In this manual, "microSD™ memory card (commercially

available)” and "microSDHC™ memory card
(commercially available)" are abbreviated as "microSD
memory card (commercially available)" or "microSD".

◎Company names and product names referred to in this

manual are trademarks or registered trademarks of the
respective companies. The TM, ® marks may be omitted
in this manual.

3

Contents

Preface ............................................................................ 1

List of Packaged Items .................................................... 1

Operating Instructions ..................................................... 1

Regarding Notations Used in This Document ................. 1

Contents ..................................................4

Contents

Getting Ready ..........................................5

Names and Functions of Parts ....................................... 5

Using microSD Memory Card ......................................... 7

Charging ......................................................................... 8

Turning the Power On/Off ............................................. 10

How to Use Touch Panel ............................................... 11

Initial Settings ............................................................... 12

Setting Wi-Fi

Start Screen .................................................................. 16

Basic Operations ..................................18

Using the Home Screen ................................................ 18

Taking Screenshot ....................................................... 18

Setting Notification Sound ............................................ 18

Setting Home Screen .................................................... 19

Activating the Apps ....................................................... 19

Notification Panel .......................................................... 19

Setting Airplane Mode .................................................. 20

44

®

................................................................ 15

Setting Functions .......................................................... 21

Setting Battery Saver .................................................... 22

Safety Precautions ................................23

When Using the Product ............................................... 23

Safety Precautions (Observe Strictly) ........................... 25

Material List .................................................................. 32

Handling Precautions .................................................... 33

Notes on Using Bluetooth

Function ........................................................................ 38

®

/Wireless LAN (Wi-Fi®)

Appendix ................................................41

Updating Software ........................................................ 41

Troubleshooting ............................................................. 42

After-Sales Service ....................................................... 43

Main Specifications ....................................................... 44

General Notes ............................................................... 45

FCC Compliance Information ....................................... 47

Intellectual Property Rights ........................................... 47

Names and Functions of Parts

②

③
⑤

⑦⑥ ⑨⑧

①

⑩ ⑩

④

Getting Ready

F Power button

①

Press to power ON/OFF, activate/deactivate sleep

mode, etc.

microSD memory card slot cover

②

External connection terminal

③

Used for connecting an external connection device,

etc.

Earphone microphone terminal

④

Used for connecting earphones (commercially

available) or other accessories.

Charging terminal

⑤

Used for connecting the AC adapter.

Notification (charging) light

⑥

Lights red while charging.
Flashes according to notification settings.

Light sensor

⑦

Detects the ambient light level to adjust the display

brightness.

Display (touch panel)

⑧

In camera (lens)

⑨

Speaker

⑩

Outputs notification sounds, alarms, etc.

Getting Ready

5

⑬

⑪ ⑫

Getting Ready

■

How to open the card slot cover

6

⑮⑭

⑯

Insert a fingernail a small way into
one of the corners marked ○
pull open the cover.
Be careful not to insert your fingernail
all the way. Doing so may damage
the rubber seal under the cover.

and

Microphone

⑪
⑫

rl

Volume up / down button

Press to adjust volume.

Name plate sticker

⑬

Built-in Bluetooth

⑭

Out camera (lens)

⑮

microSD memory card slot

⑯

* The antenna is built into the product. Covering the antenna

with your hand might affect communication quality.

◎The exterior case of the product is not removable.

Removing the exterior case with force may cause
damage or malfunction.

◎The battery is built into the product and it is not removable.

To force stop and reboot the product, refer to "Forcing the
Product to Shut Down and Restart" (▶P. 10)

®

/ Wi-Fi® antenna

*

.

Using microSD Memory Card

Attaching/Removing microSD
Memory Card

■Attaching microSD Memory Card

Open the microSD memory card slot

1

cover of the product

Confirm the insertion direction of the

2

microSD memory card, and slowly insert

it into the slot until it clicks

When inserting the card into the product, confirm
the card is locked with snaps. The card may fly out if
you release your finger before the card is locked. Be
careful about it.

Close the microSD memory card slot

3

cover

◎The microSD memory card has a back and front side/top

and bottom orientation. Trying to insert the card forcefully
may cause confinement or damage.

Removing microSD Memory Card

Home screen → [Settings] → [Storage] →

1

[Unmount SD card] → [OK]

The card is unmounted.

Open the microSD memory card slot

2

cover of the product

Slowly push the microSD memory card

3

toward the slot until it clicks

Pull out the microSD memory card with fingers on
when you hear "click". Keep your fingers on while the
microSD memory card comes out of the slot. Be aware
that the card may fly out if you release your finger
while pressing hard.

Getting Ready

7

Slowly pull the microSD memory card

4

Slowly pull out the card as straight as possible.

Getting Ready

Depending on the microSD memory card, it is difficult
to pull out from the slot due to the failure of unlocking.
In that case, remove the card by pulling lightly with
your fingers.

Close the microSD memory card slot cover

5

◎Do not touch the terminal pert of microSD memory card.
◎Do not pull out the microSD memory card forcefully.

Doing so might cause a fault or loss of data.

◎After using the product for a long time, the removed microSD

memory card may become warm. This is not a malfunction.

◎When you remove the microSD memory card, be sure to

unmount the card properly to prevent data corruption or
erasure.

8

Charging

The internal battery is not fully charged at the time of
purchase. Charge the battery before using the product.
When the red light turns into green, the charging will
be completed.

◎The product may become warm while charging or during

other operations, this is not abnormal.

◎Charging the product while using the camera function,

the charging time may take longer than usual.

◎Doing various operations with the AC adapter connected,

the battery life may get short due to the short time
charging/discharging.

◎When temperature of environment or the product is

extremely high or low, charging may be stopped. Charge
the battery at room temperature as much as possible.

◎Make sure the connection is correct if the charging light

of the product blinks in red. If the charging light continues
to blink, immediately stop charging, and contact the
support center on the back cover.

◎Right after "

charging light may not turn to green, but the light will turn
to green soon and the charging will be completed.

◎Keep a metal accessory or conductive materials (metal

pieces, pencil lead, etc.) from coming in contact with the
connection terminal and prevent them from getting inside.

" is displayed while charging, the

Charging with the AC Adapter

Supplied AC adapter

How to charge the product using the supplied AC
adapter is described here.

Connect the power plug of the supplied

1

AC adapter to an outlet (100V - 240V AC)

Insert the DC plug of the supplied AC

2

adapter to straight into the charging

terminal

Make sure that the charging light turns into red. When
the battery power turns on, "
bar.
When charging is complete, the charging light turns
into green.

" appears on the status

Supplied AC adapter

When charging is complete, pull out the

3

plug straight from the charging terminal

Unplug the power plug of the supplied AC

4

adapter from the outlet

◎Note that applying unnecessary force with the AC

adapter connected to the charging terminal may cause
damage.

◎When the battery is charged in the case that the batteries

run out, charging light may not turn to green soon, but
charging is started.

Getting Ready

9

Turning the Power On/Off

Turning the Power On

Press and hold F (Power button) until

1

the notification light turns on

The start screen appears (▶P. 16).

• For the first time you turn on the product, the initial
settings activate. Set them as required.

◎When logos are being displayed on the screen, do not

Getting Ready

touch the screen because the initial setting of the touch
panel activates. Doing so may prevent the touch panel
from working properly

◎Press F (Power button) when the screen is on or turn

the screen off with no operation for a certain period, the
product enters sleep mode.

10

.

Turning the Power Off

Press and hold F (Power button) for at

1

least 1 second

[Power off]

2

Forcing the Product to Shut Down
and Restart

You can force the product to power off and reboot
when the screen does not respond, or the power
cannot be turned off.

Press and hold F (Power button) and

1

(Volume up button) at the same time

r

for at least 11 seconds

◎If you turn off the product forcibly and restart, an unsaved

data will be lost. Do not perform except when the product
does not respond.

How to Use Touch Panel

The product is equipped with a touch panel, allowing
you to operate by touching directly the screen with
your fingers.

■Tap/Double-tap

Lightly touch a screen and then
immediately release your finger.
Tapping a screen twice in the
same position is called double­tap.

■Long-touch

Keep touching an item, button,
etc.

■Slide/Swipe

While lightly touching the screen,
trace to the desired direction in
order to view hidden content.

■Flick

Touch the screen and flick up/
down/left/right.

■Zoom-in/Zoom-out

While touching the screen with
two fingers, move the fingers
away and closer to each other.

Getting Ready

■Drag

While lightly touching the screen,
trace to the desired position.

11

Initial Settings

When you turn on the product for the first time
after purchasing the product, follow the on-screen
instructions to set language preferences, Wi-Fi
Google account, and so on.

■Setting up Google Account

Set up Google account to use Google apps such as
"Gmail" and "Play Store".
Setting items are as below (besides the items below,
register "First name" and "Last name").

User name Register your Google account (user ID) and a

Getting Ready

Password Register password for the Google account.

Tap [English] → Tap the arrow

1

12

character string for mail address. You can register
a desired name, but a name already registered
by another user cannot be set.

• If you use Japanese, leave [
selected.

日本語

] (Japanese)

Set up the Wi-Fi® network to connect as

2

required → [NEXT] → Set up the account

• If you tap [SKIP], input screens for date & time, and

®

,

name appear. Set up them and proceed to step 8.
From here on, follow the on-screen instructions.

• If you have a Google account, enter a mail address
or phone number → [NEXT].

➡

Enter "First name" and "Last

3

name" → [NEXT] → Enter the birthday and

gender → [NEXT] → Enter a user name

you want → [NEXT]

Checking registration of user name starts.

➡

Enter a password → Reenter the

4

password for confirmation → [NEXT]

Getting Ready

13

Confirm/Change the country name and

5

phone number → [NEXT]* → [VERIFY] →

check the contents, then [I AGREE]

• If you do not set up, tap [Skip].

* Text message for Google verification code will be sent to the set

phone number.

Getting Ready

➡

14

Check the contents, then [NEXT]

6

Select payment method → [NEXT] →

7

Follow the on-screen instructions and

enter billing information

• If you do not set up, tap [Remind me later] → [NEXT].

[SET SCREEN LOCK NOW] → Select the

8

security type → Follow the on-screen

instructions and make the security

settings

• If you do not set up, tap [SKIP] → [SKIP ANYWAY].

Confirm the Google service settings →

9

[NEXT]

➡

Setting Wi-Fi

Use your home wireless LAN (Wi-Fi®) or public wireless
LAN to connect to the Internet.

Home screen → [Settings]

1

[Wi-Fi] → [On]

2

Wi-Fi setting screen appears, and available Wi-Fi®
networks are listed.

Select a Wi-Fi® network to connect →

3

®

[CONNECT]

• If you connect a security-protected Wi-Fi® network,
enter a password (security key)

* A password (security key) is set up at an access point. For details,

contact a network administrator.

• When the connection is completed, " " appears in
the status bar.

*

→ [CONNECT]

Getting Ready

15

■Using WPS System Access Point

①

②

《

Start screen

》

Wi-Fi® network list screen → [ ] →

1

[Advanced]

[WPS Push Button] / [WPS PIN Entry]

2

• For using WPS button, keep pressing WPS button of
access point to set to WPS mode. An access point is
automatically detected, and registration starts.

• For entering WPS PIN, enter displayed PIN code for
access point, and registration starts.

Getting Ready

◎The battery is consumed faster when the wireless LAN

®

(Wi-Fi

) function is set to on. You are recommended to
turn off the wireless LAN (Wi-Fi
it.

®

) function when not using

Start Screen

The start screen is displayed when you turn the
product on or cancel the sleep mode.

Switching to the Home Screen
from the Start Screen

You can switch to the home screen with the following
operations when the start screen appears.

Swipe/flick

1

The home screen appears (▶P. 18). Or, the previous
screen which the product turns to sleep mode
appears.

• Swipe/flick [
to activate Camera.

] displayed at the bottom of the screen

16

Clock display

①

Notifications

②

Double-tap a notification to activate notified app.

•

Sleep Mode

Press F (Power button) while the backlight is turned
on or perform no operation for a certain period, the
screen goes off temporarily and the product enters
sleep mode. Doing the following operation, cancel the
sleep mode.

In sleep mode, press F (Power button)

1

◎To change the time to enter sleep mode, home screen →

[Settings] → [Display] → [Sleep], and select the time.

◎When you press F (Power button) to display the

screen in sleep mode, do not touch the screen. Doing so
may prevent the touch panel from working properly.

Getting Ready

17

Basic Operations

①

③

②

④

《

Home screen

》

Using the Home Screen

The home screen consists of multiple screens. Slide/flick
right or left to switch the screen.

Basic Operations

Status bar

①

Shortcuts/Folders

②

Indicator

③

Quick launch area

④

Taking Screenshot

Press F (Power button) and l (Volume down
button) at the same time for at least 1 second to save
the currently-displayed screen as image (screenshot).
After screenshot is completed, open the notification
panel to check the saved image.

18

◎Screenshots are saved to the internal storage. You

can check saved screenshots on the "Photos", "File
Commander", and so on.

◎Screenshot may not operate depending on an app and

function.

Setting Notification Sound

Turn off notification sounds, turn on only priority
notification sounds, and so on.

rl

1

None No notifications make any sound. Not

2

Priority Only priority notifications make sound.

All All notifications make sound.

(Volume up/down button)

even alarms.
Select [Indefinitely]/For a fixed time

] / [ ] displayed beside a

• Tap [
fixed time to specify the time period
you want to limit

Select [Indefinitely]/For a fixed time

• Tap [

] / [ ] displayed beside a
fixed time to specify the time period
you want to limit

Setting Home Screen

④

①

②

③

Set various displays of the home screen.

Home screen → Long-touch an empty

1

space

The setting screen of the home screen appears.

Wallpapers Change wallpapers on the home

2

Widgets Add widgets on the home screen.

Set the required items

3

Activating the Apps

Tap an app icon to use its function.

Home screen → Tap an app/folder to

1

activate

• If you tap a folder, tap an app to activate from the
app list in the folder.

screen.

Notification Panel

Slide down the status bar, and the notification area of
the notification panel appears. In addition, slide down
the notification panel, and the whole notification panel
appears. In the notification panel, you can check
notifications and activate apps. Also, turning on/off
frequently-used functions can be set.

Brightness level

①

Set the screen brightness. While automatic

brightness is turned on, "
brightness is adjusted automatically depending
on the ambient light. Tap "
brightness.

Quick settings tile

②

Turn on/off frequently-used functions.
Tap "

" of "Wi-Fi"/"Bluetooth", a list of available Wi-

®

networks/Bluetooth® device names appears.

Fi

" appears. The screen

" to turn off automatic

Basic Operations

19

Notification area

③

Check the product status and notification. By

tapping a notification, the corresponding app
activates depending on the information type.

Settings menu icon

④

Tap "

Basic Operations

", the settings menu (▶P. 21) appears.

◎Slide up the notification panel, and the notification panel

can be hidden.

◎A notification appears at the top of the screen when a

new notification arrives.

◎By tapping "

panel, notifications can be cleared if they can be cleared.

◎Slide down the status bar with two fingers, and the whole

notification panel appears.

" at the bottom right of the notification

20

Setting Airplane Mode

When Airplane mode is turned on, wireless functions
are disabled (packet communication, wireless LAN

®

), and Bluetooth®).

(Wi-Fi

Settings menu → [More] → Tap

1

"Airplane mode" to turn on.

When Airplane mode is turned on, " " appears in the
status bar.

◎When Airplane mode is turned on, communication such

as messaging, wireless LAN (Wi-Fi
disabled.

◎If Airplane mode is turned on, wireless LAN (Wi-Fi

®

Bluetooth

can be turned on. Follow the instructions given
by the respective company or institution regarding the
use of the product in a plane or hospital.

" " of

®

), and Bluetooth® are

®

) and

Setting Functions

Set and manage various functions from the settings
menu.

Home screen → [Settings]

1

The settings menu is displayed.

List of the Settings Menu Items

Items Settings

Wi-Fi Set up wireless LAN (Wi-Fi
Bluetooth Set up Bluetooth
Data usage Display data usage, and set up network

More Make communication settings such as

Display Make screen settings such as brightness

Sound &
notification

Storage Check memory capacity of the internal

Battery saver Set up battery saver.
Battery Display remaining level and consuming

Apps Check downloaded apps, and make

restrictions.

airplane mode and VPN.

level, wallpaper, sleep, and font size.
Make sound settings such as notification

sound and touch sound.

storage or microSD memory card, and
initialize the microSD memory card.

level of the battery.

settings of running apps.

®

).

®

.

Items Settings

Users Add and switch users.
Location Make settings of location information using

Start screen Make security settings of the start screen.
Security Make security settings such as tablet

Accounts Manage online service accounts, and make

Languages & input Select language preferences, and make

Backup & reset Make settings of backup and restore data,

Date & time Set up date, time, and time display format.
Accessibility Make accessibility service settings such as

Printing Make printing settings.
About tablet Check information such as battery

wireless LAN (Wi-Fi

encryption.

basic settings on data synchronization.

character input settings.

and perform a factory data reset.

text size to be displayed.

remaining level. Also, software update is
available here.

®

).

Basic Operations

21

Setting Battery Saver

Reduce the product's performance, and limit
background data.

Settings menu → [Battery saver]

1

Tap " " of "Battery saver" to turn on.

2

Battery saver activates. Background color of the
status bar and navigation bar turns in orange, and "
appears in the status bar.

• By tapping [Turn on automatically], and selecting
[Never]/[at 5% battery]/[at 15% battery] battery
remaining level to switch battery saver to "ON" can
be set.

Basic Operations

◎Email, messaging, and other apps that rely on syncing

may not updated unless it is activated.

◎Battery saver is turned off automatically while charging.

22

"

Safety Precautions

When Using the Product

• Before you start using the product, make sure to
read the "Safety Precautions" in this manual to ensure
correct use.

• Use this data communication terminal so that you
can hold the product at least 1.5 cm away from your
body and also do not contain metal parts between
the product and your body.

• Communication may not be possible in poor reception
areas. Communication may be interrupted if you move
into poor reception areas during communications.

• Since this product uses radio waves, the possibility of
communication intercepts by third parties cannot be
eliminated.
Since the product is a radio station under the Radio Law,

•
you may be asked to temporarily submit the product for
inspection in accordance with the Radio Law.

• The Company is not liable for any damages arising
from earthquakes, lightning, storms, floods or other
natural disasters, as well as fires, actions by third
parties, other accidents, intentional or mistaken
operation by the customer, or use under other unusual
conditions outside the responsibility of the Company.

• The Company is not liable for any incidental damages
(change/disappearance of described content, loss of
business income, disruption of business, etc.) arising
from use or inability to use the product.

• The Company is not liable for any damages arising
from failure to observe the described content of this
manual.

• The Company is not liable for any damages arising,
for example, from malfunction caused by combination
with connected devices or software not related to the
Company.

• Captured image data or downloaded data may
sometimes be altered or lost due to faults, repair or
other handling of the product. The Company is not
liable for any damage or lost income resulting from
recovery of these data.

• It is recommended you keep a copy of important data
in your PC's hard disk, etc. Whatever the cause of the
defect or malfunction may be, the Company assumes
no responsibility for alteration or loss of saved data.

• Contents saved in the product, such as contacts,
mails and favorites, might be altered or lost by an
accident, fault, repair or mishandling. Be sure to keep
a copy of important contents. Note that the Company
assumes no responsibility for any damages or lost
profits resulting from altered or lost contents.

Safety Precautions

23

• Note that content data (both charged or free content)
saved on the product cannot be returned to the
customer when the product is replaced for repair of a
fault, for example.

• The product uses liquid crystal for its display. The
main display response speed may become slow
when the ambient temperature is low, which is due
to the characteristics of liquid crystal and is not a
malfunction. The main display response speed will
return to normal at room temperature.

• Although the display used on the product is made
using high-precision technology, some pixels
(dots) might be lit or out at all times. This is not a
malfunction.

• You are recommended to store copies of individual
data such as photos/movies you took and music in
your PC by sending each file as mail attachment,
etc. Note, however, that you may not be able to make
copies of some copyrighted data even by the above-

Safety Precautions

mentioned means.

• Do not discard the product together with regular
trash. Please cooperate in the collection of the
product when the product is no longer needed
to protect the environment and effectively use
resources.

24

◎Reproduction of the content of this manual in part or in

whole is prohibited.

◎The content of this manual is subject to change without

notice.

◎Some functions may not be available due to OS

specification changes, or service changes/end, etc.

◎Every effort has been made in the preparation of this

manual. Should you notice any unclear points, omissions,
etc., feel free to contact us.

Safety Precautions (Observe Strictly)

DANGER

WARNING

CAUTION

Before using the product, thoroughly read this

■

"Safety Precautions" for proper use.

These precautions are intended to protect you

■

and others around you. Read and follow them
carefully to avoid injury, damage to the product or
damage to property.

The signs below differentiate between the levels

■

of danger that can occur if the product is not
used within the specified guidelines.

This sign denotes that "death or
serious injury
from improper use".

This sign denotes that "death or
serious injury
improper use".

This sign denotes that "minor
injury
may result from improper use".

*1 Serious injury: This refers to loss of sight, injury, burns (high- and low-

*2 Minor injury: This refers to injuries, burns (high- and low-temperature),

temperature), electric shock, broken bones, injuries with
residual aftereffects from poisoning, etc., and injuries
requiring hospital admission for treatment or long term
hospital attendance as an outpatient.

electric shock, etc. that do not require hospital admission for
treatment or long-term hospital attendance as an outpatient.

*1

may directly result

*1

may result from

*2

or damage to property*3

*3 Physical damage: This refers to extended damage to buildings, furniture,

livestock, or pets.

■Explanation of Graphic Symbols Used
in This Manual

Indicates an
action that is not
allowed.

Indicates that
disassembly is
not allowed.

Indicates
that use in a
place where
the product
is likely to get
wet or allowing
the product to
get wet is not
allowed.

Indicates that
handling with
wet hands is not
allowed.

Indicates an
action based on
instructions that
must be done.

Indicates that the
power plug must
be disconnected
from the power
outlet.

Safety Precautions

25

■Precautions Common to the Main Unit,

DANGER

Internal Battery, Charger, Peripheral
Devices

Do not use, store or leave the product in hot places
(e.g. by the fire, near a heater, under a kotatsu or
futon, in direct sunlight, in a car in the hot sun).

Doing so may cause fire, burns, injuries, or electric
shock.

Do not put the product into or near a heating
cooking device such as a microwave oven or
IH cooker, or high-pressure container such as a
pressure cooker.

Doing so may cause fire, burns, injuries, or electric
shock.

Do not put sand, dirt, or mud on the product or put
it on them directly. Do not touch the product with

Safety Precautions

hands to which sand or others adhere.

Doing so may cause fire, burns, injuries, or electric
shock.

Do not charge when the product is wet with water
(drinking water, perspiration, seawater, urine of pet
animals, etc.).
Also, do not charge in places where it comes into
contact with water such as a bathroom.

Doing so may cause fire, burns, injuries, or electric
shock.

26

Do not subject the product to strong pressure or
break the product. Especially when bringing the
product putting in a bag, etc., do not let the product
hit against surroundings or being put between the
objects.

Doing so may cause fire, burns, or injury due to built­in battery damage.
* Examples to avoid

• Putting the product in a bag and catching them in a door or
a door of car

• Stepping on the product on a soft object such as a sofa,
bed, or bedding, or on a floor

Do not disassemble or modify in that manner.

Doing so may cause fire, burns, injuries, or electric
shock.

Do not try to remove the internal battery of the
product.

Doing so may cause fire, burns, or injuries.

Do not let the product get wet with water (drinking
water, perspiration, seawater, urine of pet animals,
etc.).

Doing so may cause fire, burns, injuries, or electric
shock.

Do not put water (drinking water, perspiration,
seawater, urine of pet animals, etc.) into the
charging terminal or the external connection
terminal.

Doing so may cause fire, burns, injuries, or electric
shock.

Use the optional products specified by the

WARNING

CAUTION

Company.

Not doing so may cause fire, burns, injuries, or electric
shock.

Do not drop, trample, or throw the product or give
a strong force or vibration to it.

Doing so may cause fire, burns, injuries, or electric
shock.

Do not allow conductive materials (metal pieces,
pencil lead, etc.) to come in contact with the
charging terminal or the external connection
terminal, and do not allow dust to get inside.

Doing so may cause fire, burns, injuries, or electric
shock.

Do not cover or wrap the product with bedding, etc.
while using or charging the product.

Doing so may cause fire or burns.

If charging is not completed after the specified
charging time, stop charging.

Overcharging may cause fire, burns, or injuries.

Make sure to turn off the product or stop charging
before you get close to places like a gas station
where a flammable gas or dust can be generated.

Using the product in places where a flammable gas
can be generated may cause an explosion or fire.

Perform the following operations while using,
charging, or keeping the product if there are
odors, noise, smoke, overheating, discoloring,
deformation, or other abnormalities.

• Remove the power plug from the wall outlet.

• Turn the product off.
Not doing the above operations may cause fire, burns,
injuries, or electric shock.

Do not use the damaged product.

Doing so may cause fire, burns, or injuries.

Do not leave the product on unstable or sloping
surfaces.

The product may fall and cause injuries.

Do not use or store the product in humid or dusty
places, or places that get hot.

Doing so may cause fire, burns, or electric shock.

When children use the product, do not let them
use incorrectly without instruction by an adult for
proper use.

Doing so may cause injuries.

Do not store the product within the reach of small
children.

Doing so may cause accidental swallowing, injuries,
or electric shock.

Safety Precautions

27

■Main Unit

DANGER

WARNING

Safety Precautions

28

Be careful when using the product continuously
or charging as it gets hot. Also, avoid touching the
product continuously falling asleep unintentionally.

The product or AC adapter may become hot when
using continuously such as applications, data
communication, watching videos, or while charging.
Depending on your physical predisposition and
physical condition, contacting continuously with a high
temperature part may cause skin redness, itching,
rash, or low-temperature burns.

Do not throw the product into fire or apply heat.

Doing so may cause fire, burns, or injuries.

Do not apply excessive force such as sticking a
sharp object (nails, etc.) into the product, hitting it
with a hard object (hammer, etc.), or stepping on it.

Doing so may cause fire, burns, or injuries.

If the substance inside the main unit comes
into contact with your eyes, mouth and so on,
immediately rinse the area with clean water, and
then see a doctor right away.

Not doing so may cause loss of sight or poor physical
condition due to the influence of the substance inside
the main unit.

Do not watch a repeatedly flickering screen for a
long time.

Doing so may cause muscle spasms or loss of
consciousness, etc.

Do not allow water or other liquids (drinking water,
perspiration, seawater, urine of pet animals, etc.),
metal pieces, flammable material or foreign object
into the microSD memory card slot on the product.
Do not mistake the slot and direction of the
microSD memory card.

Doing so may cause fire, burns, injuries, or electric
shock.

Do not expose the camera lens part to direct
sunlight for an extended period.

Doing so may cause fire, burns, or injuries by the light­collecting mechanism of the lens part.

Turn off the product or set it to Airplane mode
before going aboard an airplane.

Since using the product on airplanes is restricted,
follow the instructions given by the respective airlines.
The product's signals may adversely affect on-board
electronic equipment.
If you commit a prohibited act while using the product
on an airplane, you might be punished by law.

Follow the instructions given by the respective

CAUTION

medical institution regarding the use of the product
in a hospital.

Turn off the product in areas where the use of the
product is prohibited.
The product's signals may affect electronic equipment
and electronic medical equipment.

If you have a weak heart, be careful about
notification sound volume settings.

Sudden notification sound surprises you, it may cause
harmful effect on heart.

To use electronic medical equipment, check with
electronic medical equipment manufacturer or
vendor to determine how devices are affected by
radio waves before using.

Not doing so may cause harmful effect on electronic
medical equipment, etc.

Turn the product off near high-precision electronic
control equipment or electronic equipment using
low-power signals.

Not doing so may cause the equipment to fail or
malfunction.
* Examples of electronic equipment to avoid
A hearing aid, an implanted pacemaker, an implanted

cardioverter-defibrillator, other electronic medical
equipment, or other automatic control devices,
etc. To use an implanted pacemaker, an implanted
cardioverter-defibrillator, or other electronic medical
equipment, check with electronic medical equipment
manufacturer or vendor to determine how devices
are affected by radio waves before using.

When the display or camera lens part is
accidentally broken, be careful of broken glass or
exposed internal parts of the product.

Not doing so may cause burns, injuries, or electric
shock with damaged parts or exposed parts.

If the internal battery leaks or gives off a strange
smell, immediately remove the product from the
vicinity of open flames.

The battery fluid is flammable and could ignite,
causing a fire, explosion, etc.

Be careful not to let your pet bite the product.

May cause internal battery to ignite, burst, heat, or
leak, and may cause fire, burns, or injuries.

If the display breaks and the fluid leaks out from
inside, do not let the fluid contact with the skin on
your face or hands, or clothes.

Doing so may cause eye or skin problems.
If the substance inside the display enters your eyes,
mouth, and so on, or comes into contact with your skin
or clothes, immediately rinse the area with clean water.
If the fluid enters your eyes, mouth, and so on,
immediately see a doctor after rinsing.

Safety Precautions

29

Safety Precautions

WARNING

30

Do not discard the old product together with
regular trash.

Doing so may cause fire, burns, or injuries. Also,
may cause environmental disruption. If you dispose
of the product, follow the instructions of your local
municipality that has a battery recycling program.

If fluid leaks out from the internal battery, do not
let the fluid contact with the skin on your face or
hands, or clothes.

Doing so may cause eye or skin problems.
If the substance inside the battery enters your eyes,
mouth, and so on, or comes into contact with your skin
or clothes, immediately rinse the area with clean water.
If the fluid enters your eyes, mouth, and so on,
immediately see a doctor after rinsing.

To use the product in car, check with automobile
manufacturer or dealer to determine how vehicle
devices are affected by radio waves before using.

In rare cases, using the product in some vehicle
models can cause the vehicles electronic equipment
to malfunction. In that case, stop using the product
immediately.

If you develop skin problems, stop using the
product immediately, and see a doctor.

Itching, rashes, eczema, etc. sometimes occurs
depending on your physical constitution and
condition.
For material of each part ▶P. 32 "Material List"

Make sure that there is no adhered metal pieces
(cutter blade, staples, etc.) as the speaker part of
this product generates magnetism.

Not doing so may cause injuries with adhered metal
pieces.

Use the product in a well-lighted area and put
some distance between you and the display when
watching the display.

Using the product in dark places or near eyes may
affect your vision.

■Charger

Do not use if the cord of the AC adapter is
damaged.

Doing so may cause fire, burns, or electric shock.

Do not touch the AC adapter if you hear thunder.

Doing so may cause electric shock.

Do not short the charging terminal while it is
connected to an outlet. Do not allow any part of
your body such as your hands or fingers to come
into contact with the charging terminal.

Doing so may cause fire, burns, or electric shock.

Do not place heavy objects on the cord of the AC
adapter, or do not pull the cord with excessive
force.

Doing so may cause fire, burns, or electric shock.

When you plug/unplug the AC adapter into/from
the outlet, do not contact metal objects with the
jack.

Doing so may cause fire, burns, or electric shock.

Do not connect a transformer for overseas travel
(travel converter) to the AC adapter.

Doing so may cause ignition, overheating, or electric
shock.

Do not apply excessive force on the connection
part with the AC adapter connected to the product.

Doing so may cause fire, burns, injuries, or electric
shock.

Do not touch the cord, charging terminal or power
plug of the AC adapter with wet hands.

Doing so may cause fire, burns, or electric shock.

Use the product at the specified power supply
voltage.
When charging the product overseas, use the AC
adapter for global use.

Incorrect power supply voltage may cause fire, burns,
or electric shock.
AC adapter: 100V AC (Connect to an AC outlet for
internal household use)
AC adapter for global use: 100V AC to 240V AC
(Connect to an AC outlet for internal household use)

Wipe off dust on the power plug.

Not doing so may cause fire, burns, or electric shock.

Fully plug the AC adapter into the outlet.

Not doing so may cause fire, burns, or electric shock.

When you disconnect the power plug from an
outlet, do not pull the cord of the AC adapter with
excessive force. Instead, grasp the adapter to
disconnect.

Pulling the cord of the AC adapter may damage the
cord and cause fires, burns, electric shock, etc.

When plugging/unplugging the AC adapter into/
from the product, do not pull the cord with
excessive force. Instead, plug/unplug it straightly
toward the jack to connect.

Not doing so may cause fire, burns, injuries, or electric
shock.

Stop using the product immediately if you notice
deformation of the charging terminal. Also, stop
using the product after recovering the original form
of the terminal.

Short-circuiting of the charging terminal may cause
fire, burns, injuries, or electric shock.

When the AC adapter is not used for a long time,
disconnect the power plug of the AC adapter from
the outlet.

Not doing so may cause fire, burns, or electric shock.

Immediately remove the power plug from the outlet
if water or other fluids (drinking water, perspiration,
seawater, urine of pet animals, etc.) get on the
adapter.

Not doing so may cause fire, burns, or electric shock.

Safety Precautions

31

Always remove the power plug from an outlet when

CAUTION

WARNING

cleaning the equipment.

Not doing so may cause fire, burns, or electric shock.

Do not touch the AC adapter for a long time when
connected to an outlet.

Doing so may cause burns.

■Use near Medical Instruments and
inside Medical Facilities

Wearers of medical equipment such as implanted
pacemakers or defibrillators must carry and use
the product at least 15 cm away from the implanted
device.

Safety Precautions

32

Radio waves may affect the performance of electronic
medical equipment.

When using electronic medical devices as home
medical treatment other than an implanted
pacemaker and an implanted cardioverter defibrillator
outside medical facilities, check individually with the
manufacturer of the electronic medical equipment
regarding the influence of radio waves.

Radio waves may affect the performance of electronic
medical equipment.

Make sure that the product will not emit any
signals (turn off power, put it in Airplane mode,
etc.) if within 15 cm of those around you, such as
where crowded and you cannot move freely.

Since there may be people with an implanted
pacemaker or an implanted cardioverter-defibrillator
nearby. Radio waves may affect the performance of
electronic medical equipment.

When using the product in medical facilities, be
sure to observe the regulations of the facility.

Radio waves may affect the performance of electronic
medical equipment.

Material List

Main Unit

■

Part Material Surface

Exterior case PC + GF resin Heat cured

Display Strengthened

Power button PC resin Heat cured

glass

Treatment

urethane
coating

Chemically
strengthened
processing

acrylic coating
+ UV cured
acrylic coating

Part Material Surface

Exterior panel (all
circumferential side),
volume up/down button,
camera lens circumference

Camera lens PMMA resin Chemically

microSD memory card slot
cover

AC Adapter

■

Main unit (exterior) PC resin
Cable TPE resin
Plug Nickel plating

Part Material

PC resin UV cured

PC resin/TPE
resin

Treatment

acrylic coating

cured
processing

Heat cured
acrylic coating
+ UV cured
acrylic coating

Handling Precautions

These precautions are provided to prevent product
faults and to ensure that performance can be fully
demonstrated. Thoroughly read these precautions to
ensure correct use.

Precautions Common to the Main Unit, Internal

■

Battery, Charger, Peripheral Devices

●Do not apply excessive force to the product during use.

Be sure not to put the product into a tightly packed bag
or place a heavy object on the product in a bag. Doing so
might damage the display or internal circuit board resulting
in a malfunction.
Keeping an external connection device connected to
the external connection terminal, earphone microphone
terminal, or charging terminal might damage the connector
resulting in a malfunction. Such damage and malfunction
are not covered by the warranty, even if there is no external
damage.

●Do not use the product in extremely hot, cold or humid

places.
(Use within an ambient temperature range of 5°C to 35°C
and humidity range of 35% to 85%.)

●Do not use in places subject to lots of dust or vibration.

Doing so may cause malfunction.

Safety Precautions

33

●Clean the external connection terminal, earphone

microphone terminal, and charging terminal with dry cotton
swabs, etc. every now and then. Soiling may result in a poor
connection. Do not exert a strong force to clean the external
connection terminal, earphone microphone terminal, or
charging terminal to prevent deformation.

●Clean the product with a soft dry cloth (such as the type

used for eyeglasses). Forcefully rubbing with a dry cloth
may scratch the display. The display may be stained if
splash or smear is left attached to the surface. Wiping
the product using alcohol, thinner, benzene, detergent,
etc. might erase the printing on the outer cover or cause
malfunction.

●Use as far away as possible from land-line phones, TVs and

radios. Use nearby might affect them.

●The product may become warm while charging or during

other operations, depending on the situation, but this is not
abnormal.

●Do not place near corrosive chemicals or in places

where corrosive gas is generated. Doing so may cause

Safety Precautions

malfunction.

●Do not use outside when you can hear thunder. Doing so

might risk lightning strikes and electric shock.

●Use only the operation-verified peripheral devices. Use of

other peripheral devices might cause malfunction.

●Do not put the product in a cooking apparatus such as

microwave oven or a pressure vessel. Doing so may cause
malfunction.

34

●The customer is not allowed to disassemble, modify or

repair the product. Doing so may cause malfunction.
Modification of the product is in violation of the Radio Law
and Telecommunications Business Law.

●Do not allow your finger or conductive foreign objects (metal

fragments, pencil leads, etc.) to come into contact with or
get inside the connection terminal, earphone microphone
terminal, and charging terminal to avoid them from short­circuit. Doing so may cause malfunction.

●In the event that the product gets wet while charging,

immediately disconnect the power plug of the AC adapter.

●Do not use the product while driving a car or motorbike,

riding a bicycle or walking. Use of a tablet while driving a
car or motorbike is prohibited by law. Use of a tablet while
riding a bicycle may be punishable by some regulations.

●Using or charging the product in a bag or while it is covered

with bedding might cause malfunction.

●When using an AC adapter or external device, insert/remove

the connector straight to/from the terminal. Make sure the
orientation of the connector. Unless it is correct, it may
cause a fault.

●Do not expose the camera lens part to direct sunlight for an

extended period. Doing so may cause malfunction.

●Do not store the product in places subject to direct sunlight

(e.g. in a car), places that get hot, places that get extremely
cold, and in humid or dusty places. Doing so may cause
malfunction.

●Do not leave the product on unstable or sloping surfaces.

Be careful especially when the product is charging. The
product may fall and cause malfunction.

●For charging the product, do not exceed the rating of an

outlet or wiring device by starburst connection etc.

Main Unit

■

●The battery is built into the product and it is not user

replaceable. For information on battery replacement,
contact the support center on the back cover.

●Do not forcefully press, tap or intentionally subject the

display to strong impact. Doing so might cause scratching
or damage.

●Do not forcefully press your fingernails, sharp objects, or

hard objects against buttons or display surface. Doing so
may cause scratching or damage.

●The touch panel is designed to be lightly touched by

fingers. Avoid pressing forcefully or using sharp objects
(fingernail, ballpoint pen, pin, etc.).
The touch panel might not respond to the following types of
operation. These may also result in malfunction.

with fingernails

・

with gloved fingers

・

with another object placed on the operation area

・

with a protective film or sticker adhered

・

●Never use the modified product. Use of a modified device

violates the Radio Law and Telecommunications Business
Law.
The product has acquired such certification as conformity
with technical regulations for a specified radio station based
on the Radio Law and conformity with technical regulations
for a terminal device based on the Telecommunications
Business Law, and the "Technical Conformity Mark " is
indicated in the name plate sticker on the product.
If the modification is made to the internal components,
the certifications of conformity with technical regulations
will become invalid. Never use the product without these
certifications valid. Doing so violates the Radio Law and
Telecommunications Business Law.

●Take care not to place magnetized items such as magnetic

cards, speakers and TV sets near the product as it might
cause malfunction.
Putting strong magnetism close to the product might cause
false operation.

●Do not bring magnetized cards such as cash cards, credit

cards and prepaid cards closer to the product. Doing so
may result in loss of recorded information.

●When you put the product in your bag, etc., take care so

that the display does not come in contact with metal objects
or other hard objects. Doing so may cause scratching or
damage. Contacting metal or other hard parts with the
display may cause scratching or damage.

Safety Precautions

35

●When suddenly brought into a warm place from a cold

place, or when in a humid location, or when used where
temperature suddenly changes (e.g. near the air discharge
port of an air conditioner), water droplets (i.e. condensation)
sometimes are formed inside the product. Note that when
used under conditions such as this, humidity might cause
corrosion or a fault.

●Camera lens part or inside of the display may mist over (dew

formation) because of usage environment such as temperature
or humidity. This is not malfunctioning or abnormal.

●Environment for easily generating dew formation on the

camera lens part or inside of the display
In the following cases, such as large temperature change or
high humidity, camera lens part or inside of the display mist
over because of usage environment.

Bring the product from a high temperature land into a low

・

temperature water.

Bring the product from a cold place into a warm place

・

such as an indoor.

Open/Close the microSD memory card slot cover in a high

・

humidity environment.

Safety Precautions

●How to reduce condensation

Do not use the product in places that get hot and humid,
and sandy or dusty places. Leave the product with the
microSD memory card slot cover opened for a while until
the condensation is cleared when the ambient temperature
is held constant.

●While writing/reading data to/from a microSD memory card,

do not subject the product to vibration or impact, or turn off
the power. Doing so may cause data loss or malfunction.

36

●Do not cover the sensor with your finger or put a sticker on

it. May hinder the sensor from detecting the ambient light
level and functioning correctly.

●Keep the microSD memory card slot cover closed when

using the product. Using the product with the cover
opened can allow dust, liquid, etc. to enter and may cause
malfunction.

●Do not allow liquids, metal objects, or other foreign objects

to get inside of the microSD memory card slot. Doing so
may cause malfunction.

●Do not give strong impact on the product such as dropping,

throwing, stomping. Doing so may cause malfunction.

●Do not place the product directly on sand at a beach, etc.

If sand or other small particles get inside the microphone,
speaker, or the product, it may cause the volume to drop or
malfunction.

Touch Panel

■

●Any soiling on the display surface may cause false

operation. Wipe the display with a soft, dry cloth.

●Putting stickers or sheets (e.g. commercially available

protective films, peep prevention sheets) on the display
might cause incorrect operation of the touch panel.

●When carrying the product in your bag, etc., take care not

to put the touch panel close to metals or other conductive
materials, as it might cause false operation of the touch
panel.

Internal Battery

■

(The internal battery of the product is a
lithium-ion battery.)

The internal battery is not fully charged at
the time of purchase. Charge the battery
before using the product. Also charge the
battery after long periods of disuse before
using the product.

●Use in very hot or cold environments, for example, when left

in an automobile with the windows closed in summer, will
cause the battery capacity to drop and shorten the available
battery usage time. This will also shorten the internal
battery's service life. Try to use the internal battery as much
as possible at room temperature.

●After the internal battery is charged, battery power

decreases bit by bit even if the product is not used. The
internal battery may be discharged if the product is not
used for a long time. We recommend charging the battery
before use.

●The internal battery is a consumable accessory. If the

performance of an internal battery does not recover (e.g. the
usable time after each charge has become extremely short),
the internal battery is at the end of service life, so stop using
the product. Since the battery is built into the product, the
support center keeps your product and replaces the battery
for a fee. Please note that you may not be able to use the
product for a certain period. Please understand. Note that
the length of service life varies depending on the usage
condition, etc.

●The internal battery may swell up as it approaches the end

of its battery life. This is due to the properties of lithium-ion
batteries, and is not a problem in terms of safety.

Charger

■

●Do not wrap the cord of the AC adapter around the adapter

unit. Do not forcibly bend the AC adapter plug or the
connection between the connector and power cord. Do not
place heavy objects on the cord of the AC adapter or USB
connection cable, or do not pull the cord with excessive
force. Doing so may cause malfunction.

●When unplugging the power plug of the AC adapter from

the power outlet, hold and pull the power plug. If you pull
the cable, it might be damaged.

Camera

■

●When photographing important occasions, take a trial shot

and check the shot image to make sure it is correctly shot.

●Do not shoot in areas where shooting is prohibited.

Copyrights and Rights of Portrait of Portrait

■

●You are not allowed to copy, distribute, publish, modify or

edit the data you shot, recorded or downloaded using the
product without consent of the copyright holder, except for
personal use, under the copyright law.
In addition, do not use or modify portraits or names of other
individuals without their consent, as it may infringe on rights
of portrait.
Note that shooting and recording might be restricted at
some live performances, shows and exhibitions even for
personal use.

Safety Precautions

37

●Be careful about the copyright and portrait right when

posting photos you shot, etc. on Internet homepages.

Backup Content On the Product

■

●Please back up important content registered to the product

or downloaded to the product from an outside source.
Content recorded to memory on the product sometimes is
cleared, altered, and so on by unexpected factors, such as
static electricity or a fault, repair, mishandling, etc.

FCC Certification Information

■

●The product is certified by Federal Communications

Commission (FCC).
The product's FCC ID is JOYCA02.
Also, FCC ID is indicated in the name plate sticker on the
product.

Safety Precautions

38

Notes on Using Bluetooth®/
Wireless LAN (Wi-Fi®) Function

• The Bluetooth® function of the product conforms to
domestic standards of Japan, FCC standards, and
has been certified.

• Use of the Bluetooth
countries or regions. If you use the product overseas,
check the relevant laws and regulations of the
country/region you visit.

• The wireless LAN (Wi-Fi
conforms to domestic standards of Japan, FCC
standards, and has been certified.

• Use of the Wireless LAN (Wi-Fi
in some countries or regions. If you use the product
overseas, check the relevant laws and regulations of
the country/region you visit.

• The 2.4 GHz band used by wireless LAN (Wi-Fi
and Bluetooth
devices. For this reason, the communication speed
and connectable range may be decreased, or
disconnection may occur, due to interference from
other devices.

• Do not use this product in places where
electromagnetic waves are generated or near
electric products, AV and OA equipment, or other
magnetized devices.

®

function is limited in some

®

) function of the product

®

) function is limited

®

devices is operated by various other

®

)

• Subjecting this product to magnetic or electrical
noise might increase noise, prevent it from performing
communications, and so on. (This product is
particularly susceptible to noise when it is used near
a microwave oven.)

• Using this product near a TV, radio or similar
appliance might cause reception interference, disrupt
TV images, and so on.

• Searching might not be successful if there are
multiple wireless LAN (Wi-Fi

®

) access points near the

product or the same channel is being used.

• Since using the product on airplanes is restricted,
follow the instructions given by the respective airlines.

• The communication speed and connectable
range vary depending on the distance between
communication devices, obstacles and the devices
used.

Cautions on Using 2.4 GHz Band

The frequencies used by the Bluetooth® and/or
Wireless LAN (Wi-Fi
in the 2.4 GHz band. In this frequency band, other
similar wireless stations, in-plant wireless stations for
mobile unit identification that require a license for use,
such as factory production lines, specific small power
wireless stations that do not require licenses, amateur
wireless stations (collectively called "other wireless
stations" from here on) are operated in addition to
home electrical appliances such as microwave ovens,
devices for industrial, scientific and medical devices.

1. Before using the product, make sure that "other
wireless stations" are not in operation nearby.

2. In the event that instances of radio wave
interference have occurred between the product
and "other wireless stations", immediately either
relocate the product or stop operation of the device
(stop emission of radio waves).

®

) function of the product are

Safety Precautions

39

◎Connections between the product and all other Bluetooth®

and wireless LAN (Wi-Fi
confirmed. Therefore, connections with all Bluetooth
wireless LAN (Wi-Fi

◎This product supports security features for wireless

communications that are compliant with the Bluetooth
and wireless LAN (Wi-Fi
security may not be sufficient depending on the usage
environment and configuration. Be careful when making
data communication using Bluetooth
function (Wi-Fi

◎Wireless LAN (Wi-Fi

freely connected anywhere within the radio wave range,
as it uses radio waves for exchanging information.
However, not making security settings allows the risk of
malicious use by third parties. While at the customer's
discretion and responsibility, it is recommended that you
make security settings before using the product.

◎The Company assumes no responsibility for leakage of

Safety Precautions

data or information that may occur during Bluetooth
wireless LAN (Wi-Fi

◎Since Bluetooth

the same frequency band, using the both functions at
the same may cause radio wave interference resulting in
decreased communication speed or disconnection from
the network. If connection fails, stop using either of the

®

Bluetooth

and wireless LAN (Wi-Fi®) functions.

®

) devices have not been

®

) devices are not guaranteed.

®

) standard specifications, but the

®

).

®

) has the advantage that it can be

®

) communication.

®

and wireless LAN (Wi-Fi®) functions use

40

®

or wireless LAN

®

®

and

®

/

Bluetooth® and wireless LAN (Wi-Fi®) functions of the
product use frequencies in the 2.4 GHz band.

®

• Bluetooth

function: 2.4FH1/XX1

2.4FH1/XX1

This product uses the 2.4 GHz band. FH-SS is used

as the modulation scheme. The interference distance
is about 10 m or less.

®

• Wireless LAN (Wi-Fi

) function: 2.4DS4/OF4

This product uses the 2.4 GHz band. DS-SS and

OFDM are used as the modulation schemes. The
interference distance is about 40 m or less.

This means that all bandwidths are used, and that

band of mobile unit identification devices can be
avoided.

Available channels vary depending on countries.
For use in an airplane, check with the airline company

in advance.

Appendix

Updating Software

You can update the product to the most recent
software for optimal performance and to get the latest
enhancements.

®

Use Wi-Fi
update the software.

• It is recommended to back up your data before

• For details, refer to the support information on the

• If software update has failed or stopped, perform the

• If the software update fails, it may become impossible

• Software update may not be available overseas.

• Any operations are not available during software

functions of this product to download and

■Notes on Software Update

updating software.

Kyocera homepage.

same procedure again.

to operate the product. If you cannot use the product,
contact the support center on the back cover.

update. Alarm does not work, either.

Downloading Software into the
Product to Update

Downloading updated software via the Internet directly
from the product is available.

Home screen → [Settings] → [About

1

tablet] → [Software update]

From here on, follow the on-screen instructions.

◎After a software update, the product cannot revert to the

previous version software.

Appendix

41

Troubleshooting

Before you assume that the product is malfunctioning,
confirm the following contents.

Trouble Detail

Cannot turn on
power

Cannot charge
the product

Cannot operate/
The screen does
not respond/
Cannot turn off
the power

The power
is turned off

Appendix

automatically
The power is

turned off while
the wake-up logo
is displayed

42

Is the internal battery charged? P. 8
Is

(Power button) pressed

F

and held until the notification light

?

turns on
Is the AC adapter correctly

connected?
Is the product at a high or low

temperature? The product may
stop charging depending on a
temperature.

Is the accessory (the supplied AC
adapter) used for charging?

Press and hold F (Power
button) and r (Volume up
button) at the same time for at
least 11 seconds to force the
product to shut down and restart.

Is the internal battery adequately
charged?

Is the internal battery adequately
charged?

Page

P. 10

P. 8

P. 8

P. 8

P. 10

P. 8

P. 8

Trouble Detail

" " (out of
service area)
appears

Cannot operate
button/touch
panel

A message
indicating that
charging is
necessary is
displayed

The battery can
only be used a
short time

Display is dark Is the temperature of the product

Is the product in a place where
signal is good enough?

Is the built-in antenna covered
with finger, etc.?

Is the power turned on? P. 10
Turn off the power and then turn it

on again.
The battery is almost empty.

Is the battery adequately
charged?

• Charge until the red charging
light turns green.

Does the internal battery have
adequate service life remaining?

Is the product left in the place for
a long period where "
service area) appears?

Stop using/disabling unused apps
or functions.

or battery high? The display may
become dark depending on the
temperature of the product.

" (out of

Page

P. 10

P. 37

If you cannot find the solution to your problem in the
above items, contact the support center on the back
cover.

－

P. 6

P. 8

P. 8

－

－

－

After-Sales Service

When Asking for Repair

For repair, contact our support center below.

■Smile Zemi Support Center

0120-965-727

From some IP phones (Call charges must be paid by
the customers) 03-5324-7612
Business hours: 10:00 to 20:00

* Except for our special holidays (December 31st, January 1st)

Warranty Policy

1. The terminal will be repaired for free or replaced
with the substitute terminal for free if the terminal
is malfunctioning under conditions of proper use
within the warranty period.

* The substitute terminal is a new terminal, or a terminal equal to a new

one in performance and reliability.

* Contact our support center.

2. Replacements will be charged in principle in the
following cases even within the warranty period.

• When the terminal is malfunctioning or damaged

due to fall and so on by careless use

• When the terminal is malfunctioning or damaged

due to use for purposes other than the original
intent of the terminal

• When the terminal is malfunctioning or damaged
due to use with products that the Company does
not permit the use

• When the terminal is malfunctioning or damaged
due to reasons not caused by the product

• When the terminal is malfunctioning or damaged
due to disassembly or modification

• When the terminal is malfunctioning or damaged
due to entry of liquids or foreign objects

• When the terminal is malfunctioning or damaged
due to lightnings, earthquakes, storms, floods or
other natural disasters, pollutions, salt damages,
smoke damages, abnormal voltages, and so on
When the terminal is malfunctioning or damaged due

•
to fault, misuse, and mishandling by the customer

• Replacement of consumable parts such as battery

• Abrasion, scratches, or dents on the surface of
the terminal resulting from normal use

3. This warranty is valid only in Japan.
Since the warranty will not be reissued, keep it properly.

4.

Others

The warranty does not limit your legal rights.
If you have any question out-of-warranty repair, and so
on, contact our support center.

Appendix

43

Main Specifications

■ Main Unit

Display Approx. 10.1 inches, approx. 16.77 million

Weight Approx. 560 g
Dimensions

(W × H × D)
Internal memory

Charging
times
(estimate)

Camera image pixel CMOS
Effective out-camera pixels Approx. 5 million pixels
Effective in-camera pixels Approx. 2 million pixels
Wireless LAN (Wi-Fi
Bluetooth

function

Appendix

44

colors, Transparent TFT
1280 × 800 dots (WXGA)

Approx. 270 × 180 × 10.2 mm

*1

Supplied AC
adapter

®

®

) function IEEE802.11b/g/n compatible

Compatible
version

ROM: Approx. 16 GB
RAM: Approx. 2 GB

Approx. 330 minutes

Bluetooth® standards Ver.4.1
compatible *

Bluetooth®
function

*1 Since the storage is shared by data and apps, storage space may be

reduced depending on the usage of apps.

2

*2 It is confirmed that the product and all Bluetooth® devices are compliant

with Bluetooth® standards designated by Bluetooth SIG, and they are
authenticated. However, procedures may differ or data transfer may not
be possible depending on the device's characteristics or specifications.

*3 It changes according to objects obstructing devices and signal

reception.

*4 Specifications provided in Bluetooth® standards for making

communication between Bluetooth®-compatible devices in accordance
with their intended use.

Output
Communication

*3

range
Supported

Bluetooth

*4

profile

Frequency
bands

Bluetooth® standards Class 1
Within 10 m with no obstacles

in the range
Generic Access Profile

Serial Port Profile
Advanced Audio Distribution
Profile
Audio/Video Remote Control
Profile (Version 1.3)
Object Push Profile
Headset Profile
Human Interface Device
Profile
Phone Book Access Profile
Message Access Profile
HID over GATT Profile

2.4 GHz band

■ AC Adapter

Input 100V - 240V AC 0.3A 50/60 Hz
Output 5.0V DC 1.2A
Charging

temperature
range

Dimensions
(W × H × D)

Weight Approx. 90 g

◎The continuous standby time may drop to less than

half depending on the battery charging status, usage
environment such as temperature, reception condition at
the location where the product is used, and the function
settings.

5 °C to 35 °C

AC adapter main unit: Approx. 71 × 30 × 45 mm
Cable length: Approx. 1.2 m (except for
connector insertion plug)

General Notes

This model 【KC-T301DT】 is confirmed to comply with guidelines
relating to effects of radio wave exposure as set forth by the
Federal Communications Commission (FCC). Refer to the
following.

FCC RF Exposure Information

Your wireless tablet personal computer is a radio transmitter
and receiver. It is designed and manufactured not to exceed
the emission limits for exposure to radio frequency (RF) energy
set by the Federal Communications Commission of the U.S.
Government.
The guidelines are based on standards that were developed
by independent scientific organization through periodic and
thorough evaluation of scientific studies. The standards include
a substantial safety margin designed to assure the safety of all
persons, regardless of age and health.
The exposure standard for wireless handsets employs a unit of
measurement known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6 W/kg. The tests are
performed in positions and locations (e.g. worn on the body) as
required by the FCC for each model.
The highest SAR value for this model wireless tablet personal
computer as reported to the FCC when tested for use worn on
the body in a holder or carry case, is 0.91 W/kg.
Body-worn Operation; This device was tested for typical body­worn operations with the wireless tablet personal computer kept

0.0 cm from the body. The use of beltclips, holsters and similar

accessories should not contain metallic components in its
assembly.

Appendix

45

The use of accessories that do not satisfy these requirements
may not comply with FCC RF exposure requirements, and
should be avoided. The FCC has granted an Equipment
Authorization for this model wireless tablet personal computer
with all reported SAR levels evaluated as in compliance with
the FCC RF emission guidelines. SAR information on this model
wireless tablet personal computer is on file with the FCC and
can be found under the Display Grant section of (http://www.fcc.
gov/oet/ea/) after searching on FCC ID JOYCA02.
Additional information on Specific Absorption Rates (SAR) can
be found on the FCC website at (https://www.fcc.gov/general/
radio-frequency-safety-0).

The World Health Organization has stated that present
scientific information does not indicate the need for any special
precautions for the use of mobile devices. They note that if you
want to reduce your exposure then you can do so by limiting the
length of calls or using a hands-free device to keep the mobile
phone away from the head and body.

World Health Organization
http://www.who.int/emf

Appendix

46

FCC Notice

This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.

Note:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on circuit different from

that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for

help and for additional suggestions.

Warning

The user is cautioned that changes or modifications not
expressly approved by the manufacturer could void the user’s
authority to operate the equipment.

FCC Compliance Information

The product is certified by Federal Communications Commission
(FCC).
The FCC ID of this product is JOYCA02.
FCC ID is indicated in the sticker on the back side of this
product.

Intellectual Property Rights

Trademarks

Company names and product names referred to in this
manual are trademarks or registered trademarks of the
respective companies.

Google, Android, Google Play and other marks are trademarks of
Google LLC.

THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL
PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND
NON-COMMERCIAL USE OF A CONSUMER FOR (i)ENCODING
VIDEO IN COMPLIANCE WITH THE MPEG-4 VISUAL
STANDARD ("MPEG-4 VIDEO") AND/OR (ii) DECODING MPEG­4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED
IN A PERSONAL AND NONCOMMERCIAL ACTIVITY AND/
OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED
BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS
GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE.
ADDITIONAL INFORMATION INCLUDING THAT RELATING TO
PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND
LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE
HTTP://WWW.MPEGLA.COM.

THIS PRODUCT IS LICENSED UNDER THE AVC PATENT
PORTFOLIO LICENSE FOR THE PERSONAL USE OF A
CONSUMER OR OTHER USES IN WHICH IT DOES NOT
RECEIVE REMUNERATION TO (i) ENCODE VIDEO IN
COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”)
AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY
A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/
OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED
TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR
SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL
INFORMATION MAY BE OBTAINED FROM MPEG LA, LLC. SEE
HTTP://WWW.MPEGLA.COM

microSD and microSDHC are trademarks of SD-3C, LLC.

®

Bluetooth

and logo are registered trademarks owned by the
Bluetooth SIG, Inc., and KYOCERA Corporation is licensed to
use those trademarks.

Appendix

47

Wi-Fi®, WPA®, Wi-Fi CERTIFIED logo, Wi-Fi Protected Setup logo,
and Wi-Fi Direct
Wi-Fi CERTIFIED™ and Wi-Fi Protected Setup are trademarks of
Wi-Fi Alliance.

All other company names and product names in this manual are
trademarks or registered trademarks of respective companies.

®

are registered trademarks of Wi-Fi Alliance.

License

Users of the product are authorized to use software installed into
the product described in this instruction manual. Pay attention to
the following points when using the software.
(a) The software installed on this product or part of it may not be

altered, delivered, modified, analyzed, reverse-engineered,

derived, and any such actions are prohibited.
(b) Illegally importing the software or a part of it is prohibited.
(c) This Software is provided without implied warranties

of merchantability, fitness for a particular purpose and

noninfringement of third party rights.
Note that the existing license agreement takes priority for usage
of GNU General Public License (GPL), GNU Library/Lesser
General Public License (LGPL) included in software, software
based on other open source software license and software that
KYOCERA Corporation is licensed.
For information on the Open source software, refer to "Open

Appendix

Source Software" as follows;

48

■Open Source Software

Note that the existing license agreement takes priority for usage
of GNU General Public License (GPL), GNU Library/Lesser
General Public License (LGPL) included in software, software
based on other open source software license and software that
KYOCERA Corporation is licensed. The exact terms of GPL,
LGPL and some other licenses are reproduced in "About tablet"
in this product. For details, refer to KYOCERA homepage.
This product includes software copyrighted by KYOCERA
Corporation and licensed software.
Copyright of the software designed and developed complying
with the open source software standard belongs to KYOCERA
Corporation or the third parties, distribution, reproduction,
transformation and transmission over public lines without
consent of KYOCERA Corporation are prohibited, unless you are
authorized or permitted by Copyright Law.

OpenSSL License

OpenSSL License

【

Copyright © 1998-2011 The OpenSSL Project. All rights
reserved.

This product includes software developed by the OpenSSL
Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT
''AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Original SSLeay License

【

Copyright © 1995-1998 Eric Young ([e-mail]) All rights
reserved.

This product includes cryptographic software written by Eric
Young
([e-mail])

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ''AS IS''
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,

】

】

BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Appendix

49

For inquiries, call:

・ Any inquiries such as the product, operation procedure, or repair, contact the below.

When asking for repair

For repair, contact our support center below.

Smile Zemi Support Center

0120-965-727

From some IP phones (Call charges must be paid by the customers) 03-5324-7612
Business hours: 10:00 to 20:00

* Except for our special holiday (December 31st, January 1st)

濡れた状態での充電は、
異 常 な 発 熱・焼 損 などの 原 因とな り
大変危険です。

June 2018, 1st Edition