Kymco MO MXer Service Manual - chap 10 (riduzione finale)
10. FINAL REDUCTION/
TRANSMISSION SYSTEM
10-0
MX’er SYSTEM
10
__________________________________________________________________________________
__ _ __ _ __ _ __ _ __ ___ ___ ___ ___ ___ ___ ___ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __
__ _ __ _ __ _ __ _ __ ___ ___ ___ ___ ___ ___ ___ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __
__ _ __ _ __ _ __ _ __ ___ ___ ___ ___ ___ ___ ___ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __
__ _ __ _ __ _ __ _ __ ___ ___ ___ ___ ___ ___ ___ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __
FINAL REDUCTION/TRANSMISSION SYSTEM
__ _ __ _ __ _ __ _ __ ___ ___ ___ ___ ___ ___ ___ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __ _ __
SERVICE INFORMATION -------------------------------------------- 10- 2
TROUBLESHOOTING ------------------------------------------------- 10- 2
FINAL REDUCTION DISASSEMBLY------------------------------- 10- 3
FINAL REDUCTION INSPECTION---------------------------------- 10- 4
TRANSMISSION GEARS/CRANKSHAFT REMOVAL------------ 10- 6
FINAL REDUCTION INSTALLATION------------------------------ 10- 7
10
10. FINAL REDUCTION/
TRANSMISSION SYSTEM
10-1
MX’er SYSTEM
10. FINAL REDUCTION/
TRANSMISSION SYSTEM
10-2
MX’er SYSTEM
SERVICE INFORMATION
GENERAL INSTRUCTIONS
• When replacing the drive shaft, use a special tool to hold the bearing inner race for this operation.
SPECIFICATIONS
Specified Oil: GEAR OIL SAE 90#
Oil Capacity: At change : 0.2 liter
At disassembly : 0.4 liter
TORQUE VALUES
Transmission case cover bolt 0.8_ 1.2kgf-m
SPECIAL TOOLS
Flywheel holder E021
Flywheel puller E005
Lock nut socket wrench E009
TROUBLESHOOTING
Engine starts but motorcycle won‘t move
• Damaged transmission
• Seized or burnt transmission
Oil leaks
• Oil too rich
• Worn or damaged oil seal
Loading...