User Addendum
Fiery Z5 software version 1.02
What’s new in version 1.02
This document is intended to supplement the documentation that came with your Fiery Z4 software version 1.0. It describes new features and updates information for
software version 1.02. For all other information and instructions for your Fiery Z5, use the documentation that accompanied your Fiery Z4 software version 1.0. Before using the Fiery Z5, please read this addendum and distribute it to all users.
The Fiery Z5 server has a new back panel configuration. This affects the connection of the Token Ring option. Refer to the following section for enabling the Token Ring connection on the Fiery Z5.
Connecting Token Ring hardware
The service/support center that installs the Fiery Z5 typically also installs the Token Ring option at the same time and configures the Fiery Z5 to enable printing.
Back view of the Fiery Z5 with the Token Ring option installed
Token Ring connectors
!Turn off the Fiery Z5 before connecting it to any network device.
NOTE: Do not attach cable to both Token Ring connectors.
2001 Electronics For Imaging, Inc. |
Part number: 45023973 |
Loading...