4 B
KOMPERNASS GMBH
BURGSTRASSE 21 • D-44867 BOCHUM
www.kompernass.com
ID-NR.: KH205-05/08-V3
WIRELESS DOORBELL
WIRELESS DOORBELL
Operating manual
DOMOVNÍ ZVONEK
Návod k obsluze
ZVONÈEK NA DVERE NA RÁDIOVÝ SIGNÁL
Návod na používanie
KH 205 |
|
|
|
|
|
|
||||
A |
|
|
q |
o |
||||||
|
|
|
|
|
|
|
|
a |
||
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
w |
|
||
u |
|
|
|
|
|
i |
|
|
||
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|||
y |
|
|
|
|
|
e |
|
|
||
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
t |
|
|
|
|
|
|
r |
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
B
d
s
f
g |
h |
j
Index |
Page |
|
|
|
|
Intended use |
2 |
|
|
Items supplied |
2 |
|
|
Technical Data |
3 |
|
|
Safety instructions |
3 |
|
|
The appliance parts |
5 |
|
|
Taking the appliance into use |
6 |
|
|
Maintenance |
10 |
|
|
Cleaning and Care |
10 |
|
|
Disposal |
11 |
|
|
CE-Conformity |
12 |
|
|
Importer |
12 |
|
|
Warranty and service |
12 |
Read these operating instructions carefully before using the appliance for the first time and preserve this booklet for later reference. Pass this booklet on to whoever might acquire the appliance at a future date.
- 1 -
Intended Use
This appliance serves as a radio doorbell system for wireless visitor signalisation and thus makes possible the operation of a door bell without wiring. The appliance is intended for domestic use only, not for commercial or industrial applications. No warranty is provided for damages resulting from improper use of the appliance!
Items supplied
1Receiver
1Sender
21.5 V Batteries, Type "AA/Mignon/LR6"
112 V Battery, Type 23A
1Stand for the receiver
2Screws for fixing the sender on to the assembly plate
5Nameplates
2Wallplugs with screws for sender assembly
1Wallplug with a screw for receiver suspension
1Operating manual
- 2 -
Technical data
Power supply |
|
Receiver: |
2 x 1.5V Type "AA/Mignon/LR6" |
Sender: |
1 x 12V Type 23A |
Transmission frequency: 433 MHz |
|
Range: |
100 mtrs (Free-space range) |
Ring-tone volume: |
min. 73dB(A) in 1 min (on max. setting) |
Safety instructions
•Do not permit children to handle electrical appliances without supervision, as they cannot correctly assess the possible dangers of injury.
•Check the appliance and all parts for visible damages. If the appliance is damaged, arrange for it to be checked by Customer Services.
•NEVER open the appliance. There are no user-serviceable elements inside.
Risk of accidents and injury!
•This appliance is not intended for use by individuals (including children) with restricted physical, physiological or intellectual abilities or deficiences in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the appliance is to be used. Children should be supervised to ensure
that they do not play with the appliance.
- 3 -
•Keep batteries well away from children. Children can put batteries into their mouths and swallow them. If a battery is swallowed, medical assistance must be sought IMMEDIATELY.
•For the handling of batteries please observe the following:
Risk of explosion!
•Do not throw batteries into a fire.
•Do not recharge the batteries.
•Never open batteries, never solder or weld batteries. The risk of explosions and injuries exists!
•Regularly check the condition of the batteries. Leaking batteries can cause damage to the appliance.
•If you do not intend to use the appliance for an extended period, remove the batteries.
Damage on the appliance
•Avoid the simultaneous usage of batteries of varying types resp. capacities.
•Do not use any aggressive chemical substances for cleaning.
•NEVER submerse the appliance in water. Wipe it only with a slightly damp cloth.
•Protect the receiver against moisture. Use it only in dry rooms, do not use it when it is raining outdoors or when close to liquids.
•Ensure that, when the receiver is in use, it cannot become wet or moist and that it cannot be damaged.
- 4 -
The appliance parts
Receiver (Fig. A) q Signal indicator
w Synchronisation button, Receiver e Button for melody selection
r Speaker
t Stand
y Volume regulator
u Signal type switch (optical/acoustic) i Battery compartment - receiver
o Loop for suspension of the receiver a Battery compartment cover - receiver
Sender (Fig. B) s Bell button d Nameplate
fIndicator for signal confirmation
gBattery compartment - sender
hSynchronisation button - sender
jAssembly plate - sender
- 5 -
Taking the appliance into use
Take the appliance out of the carton and remove all packaging materials.
Inserting the batteries in the receiver
>Open the battery compartment i on the rear of the appliance.
>Insert 2 x 1.5V batteries of the type "AA/Mignon/LR6" as per the insertion markings shown in the battery compartment i.
>Replace the battery compartment cover a.
>The appliance now switches automatically into the synchronisation mode. Press the synchronisation button on the receiver 
w to provisionally leave this mode.
Inserting the battery in the sender
>Remove the assembly plate j from the sender.
>Insert a 12 V battery, Type 23A as per the insertion markings shown in the battery compartment g.
>Pay attention to correct poling of the batteries, otherwise the appliance will not function and could even be damaged.
Should the performance of the appliance diminish or fall away completely, it means the batteries are exhausted.
>The used batteries should then be changed for new ones of the same type.
- 6 -
Take note that, after changing the batteries, the appliance MUST be synchronised once again.
Selecting the signal type
The receiver can indicate the reception of a door-ring signal either optically, acoustically or optically and acoustically. To select, bring the signal type switch u into the desired position:
- only acoustic ring indications, the selected melody sounds,
- only optical ring indications, the signal indicator blinks,
- optical and acoustic ring indications.
Adjusting the signal sound volume
To select the desired signal sound level bring the volume regulator y into the required position:
- Lower volume level
- Medium volume level
- Higher volume level.
Selecting the call melody
There are 16 different call melodies stored in the appliance.
>Repeatedly press the button for melody selection 
e.
>When the desired melody sounds, stop the selection. The appliance will utilise the last melody it played as the call melody.
- 7 -
Synchronising the sender and receiver
The sender and receiver in this doorbell system can communicate with each other over a number of different frequencies. Therefore, several doorbell systems can be operated within the appliance range without them disturbing each other. The precondition for this is that the sender and receiver within a system are working on the same frequency. For this, you must synchronise the appliances as follows:
>Press the synchronisation button on the receiver 
w. The red signal indicator now glows.
>Now press the synchronisation button on the sender h. The indicator f on the sender blinks a few times, then it goes out.
>Now press the bell button 
s.
If the synchronisation has been a success, the receiver notifies you of the programmed call signal. The appliances then conclude the synchronisation mode. Should the receiver not react as described, repeat the synchronisation.
The sender shows, with a brief glowing of the indicator f when being activated, the transmission of the signal to the receiver.
Installing the appliance
>Select a suitable positioning for the sender, close to your outer door.
- 8 -
>Using the assembly plate j of the sender, mark the positions required for the two boreholes (spacing approx. 68 mm) and then bore the holes for the enclosed wallplugs (S6).
>Screw the assembly plate j onto the wall.
>Carefully slide the plastic covering over the nameplate d to the side and then remove it.
>Write the name(s) of the residents on the plate d and then replace the plastic covering.
>Place the sender on the assembly plate j and secure it, with the enclosed small screws, to the assembly plate j.
>You can install the receiver at a suitable location either suspended by its loop o or make use of the stand t. Bear in mind that the given range refers to the free-space range. If being utilised in a building, this range is reduced quite distinctly.
>To suspend the receiver, fix the enclosed screw, with the wallplug, at a suitable location on the wall and hang the appliance from it.
- 9 -
Maintenance
Important!
NEVER open any parts of the doorbell system! Arrange for the appliance to be repaired by specialists only.
The appliance is maintenance-free. No form of maintenance, either on or in the appliance, is intended for execution by the user. In the event of malfunction or apparent damage, make contact with Customer Services. If the appliance is not to be in use for an extended period, remove the batteries.
Cleaning and Care
Important!
•NEVER submerse the appliance or its components in water or other fluids!
•Do not allow any liquids to penetrate into the appliance housing. If they do, there is a risk that the appliance could be damaged.
Cleaning the appliance:
>Clean the appliance only with a dry or lightly moistened cloth. Do not use aggressive cleaning agents!
These could damage the plastic upper surfaces.
>In the event of the batteries leaking acids, put on a pair of protective gloves. Then clean the battery compartment and the battery contacts with a dry cloth.
- 10 -
Disposal
Do not, under any circumstances, dispose of the appliance in your household refuse. This appliance is subject to the provisions of European Guidelines 2002/96/EG.
Sender and receiver units
•Arrange for the product, or parts of it, to be disposed of by a professional disposal company or by your communal waste facility.
•Observe the currently applicable regulations. In case of doubt, please contact your waste disposal centre.
Batteries/rechargeable batteries
•Used batteries/rechargeable batteries may not be disposed of in household waste.
•Batteries can contain poisons which are damaging to the environment. Therefore, dispose of the batteries/ rechargeable batteries in accordance with statutory regulations.
•Every consumer is legally obligated to surrender batteries/ rechargeable batteries to a community collection centre in their district or to a dealer. The purpose of this obligation is to ensure that batteries are disposed of in a non-polluting manner.
Dispose of all packaging materials in an
environmentally friendly manner.
- 11 -
Loading...