Kohler K-98835T-L, K-98835T-R, K-98836T-R, K-98836T-L Installation Instructions Manual

BEFORE YOU BEGINBEFORE YOU BEGIN

M

M MODULAR

INSTALLATION INSTRUCTIONS

()

MIRRORED CABINET W/ADJUSTING LIGHTING

K-98835T-L 16" ( )

K-98835T-R 16" ( )

K-98836T-L 24" ( )

K-98836T-R 24" ( )

·

Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your
particular installation . This will help you avoid costly
mistakes. In addition to proper installation, read all
operating and safety instructions.

·

All information in these instructions is based upon the
latest product information available at the time of
publication. Kohler China. reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.

·

These instructions contain important care, cleaning, and
warranty information-

consumer.

·

Before installation carefully inspect the new fixture for any
signs of damage.

WARNING: Risk of injury or product damage.

Tempered glass cannot be cut.

WARNING:

alcohol to clean the wooden surface. Use a dampened
cloth to clean.

please leave instructions for the

Don't use acidic or alkalic cleaners or

PARTS

Parts supplied with your cabinet. (For cabinet body and door
replacement, call customer service with model number.) Be
sure to check the cardboard supports in the carton, glass
parts are packed in them.

·

·

·

·

-

ACCESSORIES LISTACCESSORIES LIST

Glass Shelves

X3

Mounting Bar

X1

1240482-T01-B

Snap-in Pins

X12

Wall Anchors

X5

Top Clips

X2

Screws ST4.2 12

ST4.2 12

X8

Connector Block

X2

-1-

Caps of Screw

X10

Screws ST3.5 35

X5

13-1 528437

Copyright Kohler China Ltd., 2014

ST3.5 35

Hole Plugs

X40

, 2014

ROUGHING-IN

Reference Value

735

99

116

178

Unit:mm

K-98835T-L 16" ( )
K-98835T-R 16" ( )

370

360

25

762

386

735

99
116

178

K-98836T-L 24" ( )
K-98836T-R 24" ( )

25

762

500

490

10

590

1240482-T01-B

Kohler reserves the right to change marked dimensions without prior notice.

-2-

PRE-DRILLED HOLEPRE-DRILLED HOLE

Pre-Drilled Hole for Side Kits

Pre-Drilled Hole for Cabinet-to-Cabinet

406

Pre-Drilled Hole for Recessed Cabinet

682

SURFACE MOUNTING THE MIRRORED CABINET ON A WALL

NOTE:

Installing the mirrored cabinet on a wall without the door
attached can make installing easier for one person. Do not
mount the doors until the boxes is in or on the wall.

As shown in Fig 1, drill two 2- 5mm holes
in bottom mounting bar at indent location,
then drill 4- 6mm holes in wall at locations
shown in Fig 1, insert wall anchors.

15

46

The highest point of table

320

750

Drill holes

Drill holes

4- 6mm

4- 6mm
4- 6mm

4- 6mm

Fix the mounting bar to the
wall, level the mounting bar.

1240482-T01-B

20

Screws ST3.5 35 & Wall anchor

ST3.5 35

-3-

Fig.1

1

STEP

1