Knight Equipment LMB4 User Manual
Electronic Metering Pumps
Series MP
Key Features
Automatic Control,
•
can be ratioed from 100% to 2% of incoming signal.
Manual Control
•
resulting in accurate metering for critical applications.
Relay Output
•
for external control.
Six-button Touch Pad Control
•
recognized symbols for simplified programming.
Simple Prompts
•
understand instructions for programming. Available in
three languages.
Alarm Signals
•
pulse overflow and pulse rate high. Liquid low level
indicator capability is standard.
Timed Sequences
•
rate for repetitive metering.
Pulse Signals
•
allowing for pumps to handle peak requirements.
LCD,
•
•
16 character dot matrix backlit multi-lingual display
allows for easy reading and user-friendly programming.
Extended Two Year Warranty
for trouble free service.
Complete Economical Selection
Nineteen distinct models are available, having pressure capabilities to 300 PSIG @ 3 GPD, and flow capacities to 504
GPD @ 20 PSIG, with a turndown ratio of 1000:1. Metering
performance is reproducible to within ± 2% of maximum
capacity.
Please refer to the reverse side for Series MP specifications.
Operating Benefits
Reliable metering performance. Our guided check valves,
with their state-of-the-art seat and ball designs, provide precise
seating, and excellent priming and suction lift characteristics.
Our timing circuit is highly reliable and, by design, virtually
unaffected by temperature, EMI and other electrical
disturbances.
Rated “hot” for continuous duty. Series MP pumps
continue to meet their specifications for pressure and capacity
even during extended use. That’s because of our high quality
solenoid and special enclosure that effectively dissipates heat.
High viscosity capability. A straight flow path and ample
clearance between the diaphragm and head enable standard
PULSAtron pumps to handle viscous chemicals up to a
viscosity of 3000 CPS. For higher vicosity applications,
larger, spring-loaded connections are available.
4-20mA and 20-4mA current signals
allows for a combined 1000:1 turndown
for computer interface or AC power allows
with internationally
in plain language allow for easy-to-
for signal loss, full count, circuit failure,
can be set for selected intervals and
can be multiplied or divided by 1 to 999
on electronic circuit board
A Unit of IDEX Corporation
Leak-free, sealless, liquid end. Our diaphragms are
of superior construction—PTFE-faced, bonded to a
composite of Hypalon and fabric layers, and reinforced with
a metal insert for optimum flexibility and durability.
System Compatibility
A wide variety of chemicals can be pumped.
Liquid end materials include glass-filled polypropylene
(GFPPL), PVC, styrene-acrylonitrile (SAN), Polyvinylidene
Fluoride (PVDF), PTFE, Hypalon, Viton, ceramic, alloys and
316SS.
Immediate installation and start-up.
Included as standard accessories with all models are an
injection/back pressure valve assembly and a foot valve/
strainer assembly*, including discharge and
suction tubing (*not avail. with high
viscosity connections for >3000 CPS).
Safe and easy priming and valve
maintenance.
Included as a standard accessory is a
bleed valve assembly, including return
tubing (available only on those
models with tubing
connections and
<
240 GPD).
Quick and
economical
liquid end
maintenance.
Available for
every model is
a unique
KOPkit®, a
convenient,
economically
priced,
package
containing
new cartridge
check valves
and other
important
spare parts.
For additional information about PULSAtron’s full-featured Series E PLUS refer to Technical
Sheet No. EMP-021, about the mid-range Series E, Series D & Series A
Sheet No. EMP-022, EM P-023 & EMP-025. For information about the economical Series C
PLUS & Series C, refer to Technical Sheet No. EMP-026 & EMP-024.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
PLUS refer to Technical
technology
innovation
diversity
e x cellence
PULSAtron Series MP Specifications
Pressure and Flow Rate Capacity
LEDOM2KML2BML2AML3DML3BML3AML3KML4FML4DML4BML4HML4GML4EML5KML5HML6HML7KML7HML8HML
yticapaCHPG31.012.052.005.005.005.006.058.009.000.
lanimonDPG 356 212121410222421424440667021291042405
).xam(HPL5.08.09.09.19.19.13.22.34.38.34.66.60.75.99.119.813
erusserPGISP003052051052051001001052051001052051001051051001055302
).xam(RAB127101710177710177101701017 3.34.23.1
:snoitcennoCgnibuT
iP
gnip
ytilibicudorpeR
yticapac.xamta
SPCxaMytisocsiV .ezisllab/noitcennocenimretedlliwetarwolF.lairetam
slortnoC hctiwSenarbmeMnoitatS-6
yalpsiDsutatS thgilkca
,sthgiLrotacidnIDEL
tnuoMlenaP
uqerFekortS
ycne
MPSxaM
uO
T
Important: Series MP - 19 model selections. Digit 1 and 2 (LM) signify product class, digit 3 and 4 signify pressure/flow. For full model selection information refer
yaleRtupt
yaleRtuptuO
)noitpOrewoP(
htgneLekortS
tupnIrewoP
to Price Schedule EMP-PS LP.
ycneuqerFekortSlanretxE
)citamotuA(lortnoC
)noitpOleveLlangiS(
ycneuqerFekortS
oitaRnwoD-nru
oitaRnwoD-nruT
warDtnerruCegarevA
pmA:CAV511@
s
spmA:CAV032@
sttaWrewoPtupnIkaeP 003
@rewoPtupnIegarevA
sttaW:MPSxam
DO"8/3XDI"4/1
DO"2/1XDI"8/3
DO"61/5XDI"61/3
TPNF"4/1
107.157.158.105.251.300.500.800.0100.12
.039.735.97
DO"2/1XDI"8/3
)YLNO8HPL(DO"4/3xDI"2/1
TPNF"4/1
/1
TPNF"2
%2-/+
llabSS613htiwCroB,4,3ezisnoitcennoctceles,SPC0003otpuytisocsivroF
S.skcehcllabdedaolgnirpseriuqerSPC0003nahtretaerG
BxirtaMtoDDCLnoitisoP-61
deR-potS,gnihsalFneerG-gnisluP,neerG-nOrewoP
521
gnicaPlanretxECDAm4-02,CDAm02-4
Am01,CDV42
A5.,ZH06/05,CAV052
1:001
1:01
hp1/ZH06-05/CAV511
hp1/ZH06-05/CAV032
0.1
5.0
031
.noitcennocreporprofediuGnoitceleSee
Liquid End Materials
Series
MP
Pump
Head
GFPPL
PVC
SAN
PVDF
316 SS
Diaphragm
PTFE-faced
Hypalon-backed
Dimensions
An ISO Certified Company
Seats / O-Rings Balls
Check Valves
PTFE,
Hypalon,
Viton
Ceramic,
PTFE,
316SS,
Alloy C
ledoM
.oNAB1BC 1CDE
2AML4.53.01-8.01-5.79.831
3AML4.56.01-7.01-5.72.931
2BML4.53.01-8.01-5.79.831
3BML4.56.01-7.01-5.72.931
4BML4.56.01-7.01-5.72.931
3DML4.56.01-2.11-5.72.951
4DML4.56.01-2.11-5.72.951
4EML4.56.01-2.11-5.72.951
4FML4.56.01-7.11-5.72.981
4GML4.56.01- 7.11-5.72.981
NOTE: Inches X 2.54 = cm
* the LPH8 is designed without a bleed valve available.
Fittings
GFPPL
PVC
PVDF
Bleed Valve
Same as fitting
and check
valve selected,
except 316SS
gnippihS
thgieW
Injection Valve Assembly
Foot Valve Assembly
Same as fitting and
check valve selected
)sehcni(snoisnemiDPMseireS
ledoM
.oNAB1BC 1CDE
4HML2.69.01- 2.11-2.85.912
5HML2.63.11-2.11-2.89.912
6HML2.63.11-2.11-2.89.912
7HML1.67.11- 2.11-2.83.0112
*8HML1.6- 9.01- 6.012.8- 52
2KML4.53.01- 8.01-5.79.831
3KML4.56.01- 7.01-5.72.931
5KML4.59.01- 7.11-5.75.981
7KML1.67.11- 2.11-2.83.0112
Clear PVC
White PE
A Unit of IDEX Corporation
Standard Product Operations
27101 Airport Road • Punta Gorda, Florida 33982
TEL (941) 575-3800 • TEL 800-333-6677
FAX (941) 575-4085 • FAX 800-456-4085
spotech@pulsa.com •
www.pulsa.com
Tubing
gnippihS
thgieW
Brochure No. EMP-021
Printed in the USA 04/04
Loading...