Knight controls and pump systems are warranted against defects in material and workmanship for a period of ONE YEAR. All Electronic Control Boards have a TWO YEAR warranty. Warranty
applies only to the replacement or repair of such parts when returned to the factory with a KRA number, freight prepaid and found to be defective upon factory inspection. Rubber and synthetic rubber parts such as "O" rings, diaphragms, squeeze tubing and gaskets are considered expendable and are not covered under warranty. Warranty does not cover
liability resulting from performance of this equipment nor the labor to replace this equipment. Product abuse or misuse voids warranty. Knight products are not for use in potentially explosive environments. Any use of our equipment in such an environment is at the risk of the user. Knight does not accept any liability in such circumstances.
KNIGHT LIMITED WARRANTY
DISTRIBUTOR
Knight Headquarters Georgia Canada UK Australia North Europe France/Italy North Asia Pacific
Toll Free (800) 854-3764 Toll Free (800) 241-7789 Tel (905) 542-2333 Tel 44.1293.615.570 Tel 61.2. 9725..2588 Tel 31.53.428.5800 Tel 39.06.508.28614 Tel 82.2.3481.6683
Tel (949) 595-4800 Tel (770) 760-8777 Fax (905) 542-1536 Fax 44.1293. 615.585 Fax 61.2. 9725.2025 Fax 31.53.428.5809 Fax 39.06.508.9300 Fax 82.2.3482.5742
Fax (949) 595-4801 Fax (770) 761-0199
South Europe Southeast Asia
www.knightequip.com Tel 34.93.487.1015 Tel 65.9170.0984
Fax 34.93.215.2019 Fax 65.6489.9723
On-Premise Plus 9/2003
The Flush Manifold prevents washer
corrosion and fabric chemical burn. The
flush mode automatically activates and
opens the system’s built-in water
solenoid when chemicals are dispensed
into the manifold. A diluted flush is then
provided to the washer through a single
injection line. Chemicals can now be
dispensed while protecting fabrics from
shock. As an added precaution, built-in
check valves prevent back-siphonage
as well as cross-contamination of
chemicals.
OPTIONAL FLUSH MANIFOLD
MODEL PART NO. # of 10 oz. 2 Product Stainless Case
Min. Pumps Plastic Case with Plastic Lid
ROP-504X 8662514-01 4 ■
ROP-506X 8662516-01 6 ■
MODEL PART NO. # of 10 oz. 2 Product Stainless Case
Min. Pumps Plastic Case with Plastic Lid
OP 502 Plus 8050502 2 ■
OP 503 Plus 8050503 3 ■
OP 504 Plus 8050504 4 ■
OP 505 Plus 8050505 5 ■
OP 506 Plus 8050506 6 ■
MODEL PART NO. Output 2 Product Stainless Case
Board Plastic Case with Plastic Lid
OP502x Plus 8662502 2 output ■
OP504x Plus 8662504 4 output ■
OP506x Plus 8662506 6 output ■
MODEL PART NO. DESCRIPTION
KP5110DCX 8155262 10 oz./min. (300 ml) 110 RPM Peristaltic Pump, 24VDC
KP5200DCX 8155362 20 oz./min. (600 ml) 200 RPM Peristaltic Pump, 24VDC
MODEL PART NO. DESCRIPTION
OPRX 7600946 On-Premise Plus Remote Control with 25’ Cable
MFRX 7600947 Multi-Flow Remote Control with 25’ Cable
LFPX 7600945 Knight-Trak LFP with 25’ Cable
MODEL PART NO. DESCRIPTION
– 7655106-01 SIB 6 Pump Low Voltage Washer Interface Module w/Washer
Plug-n-Play Connection to Circuit Board
OP-4 FM 8053004 4 Port On Premise Case Mount Flush Manifold w/”L” Bracket
OP-6 FM 8053006 6 Port On Premise Case Mount Flush Manifold w/”L” Bracket
On-Premise Relay System without Pumps (Select Pumps From Pump Options Below)
OP Plus Series with SIB Washer Interface Module (without Remote, without Pumps)
Pump Options: Select Case Size for Number of Pumps Required. Select 10 oz. & 20 oz. / min. Pumps Separately
Accessories
PRODUCT ORDERING INFORMATION
6 PORT MANIFOLD
WATER INLET BACK
C
HECK VALVE
SQUEEZE TUBE TO MANIFOLD
INJECTION CHECK VALVE
* OPTIONAL PROOF OF FLOW SWITCH AVAILABLE
New OP-4/OP-6
Flush Manifold
bracket allows
the manifold to
rotate back with
pump panel.
OP Plus Series with 10 oz./min. Pumps, Remote and SIB Washer Interface Module
Remote Control Options