4KSB7068
PARTS AND FEATURES
PARTS AND ACCESSORIES
Ingredient-measuring cap
Lid
Blender jar
Blade
Power cord (not shown)
Base
Flex Edge tamper 
Jar handle with Soft Touch handle grip
Removable blender jar pad
Control dial
Pulse toggle switch Start/Stop toggle switch
Status indicator light
BLENDER SAFETY
ENGLISH |
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed, including the following:
1.Read all instructions.
2.To protect against risk of electrical shock, do not put Blender in water or other liquid.
3.Close supervision is necessary when any appliance is used by or near children.
4.Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
5.Avoid contact with moving parts.
6.Do not operate the Blender with a damaged cord or plug or after appliance malfunctions, or is dropped or damaged in any manner. Return appliance
to the nearest Authorized Service Center for examination, repair, or electrical or mechanical adjustment.
7.Do not use outdoors.
8.Do not let cord hang over edge of table or counter.
BLENDER SAFETY | 3
BLENDER SAFETY
9.Keep hands and utensils out of container while blending to reduce the risk of severe injury to persons or damage to the Blender. A spatula or scraper other than the provided Flex Edge tamper may be used, but must be used only when the Blender is not running.
10.Blades are sharp. Handle carefully.
11.The use of attachments, including canning blender jars, not recommended by KitchenAid may cause a risk of injury to persons.
12.Do not use appliance for other than intended use.
13.Always operate Blender with cover in place.
14.When blending hot liquids or ingredients, ingredient-measuring cap should remain in place over the lid opening. Always start on lowest speed and slowly ramp to desired speed when blending hot liquids or ingredients.
SAVE THESE INSTRUCTIONS
This product is designed for household use only.
ELECTRICAL REQUIREMENTS
Voltage: 120 V Frequency: 60 HZ Intensity (Amp.): 15 Amps
NOTE: If the plug does not fit in the outlet, contact a qualified electrician. Do not modify the plug in any way.
Do not use an adapter.
Do not use an extension cord. If the power supply cord is too short, have a qualified electrician or serviceman install an outlet near the appliance.
MOTOR HORSEPOWER
Motor horsepower for the Blender motor was measured using a dynamometer, a machine that laboratories routinely use to measure the mechanical power of motors. Our 3.5 peak horsepower (HP) motor reference reflects the horsepower output of the motor itself and not the Blender’s horsepower output in the Blender pitcher. As with any blender, the power output in the pitcher is not the same as the horsepower of the motor itself. This motor delivers 2.45 peak HP in the pitcher enabling your Blender to deliver robust power for all your recipes.
4 | BLENDER SAFETY
Loading...