Kenwood TK-7302V, TK-8302U User Manual
TK-7302(H)V/8302(H)U
Compact VHF/UHF FM Mobile Radios
GENERAL FEATURES
• 25 / 50 W (136-174 MHz) Models
• 25 / 45 W (450-520 MHz) Models
• Conventional Zones
• 16 Channels / 2 Zones
• Single Priority Scan
• Single / Multi-Zone Scan
• 2-Digit LED Channel Display
• Function/Status LED Dots
• Blue Function/Status LED
• Transmit /Busy / Call Alert LED
• Backlit Keys
• 9 Programmable Function Keys
• Emergency / AUX Key
• Front Panel Speaker
• Companded Audio
• Voice CH# Announcement (8 Languages)
• Voice Inversion Scrambler Built-in
• 16 Scrambler Codes (per CH)
• Encryption / Board Control
• Emergency Call Features
• Lone Worker Alert
• QT / DQT
• Operator Selectable Tone
• Two-Tone Decode
• Single & Two-Tone Encode
• DTMF Encode / Decode
• Special Alert Tone Patterns
• Busy Channel Lockout
• Time Out Timer
• Timed Power Off
• DB15 Accessory Interface
• 8 Programmable I/O Ports
• Ignition Sense
• Public Address / Horn Alert Output
• MIL-Spec Standard Mic
• MIL-Spec 12-Key DTMF Mic Option
• Windows®Programming & Tuning
• Cloning
• MIL-STD-810 C/D/E/F
• IP-54 Water & Dust Intrusion
FleetSync® /II (FM)
• PTT ID Digital ANI
• Selective Call & Group Call
• Paging Call
• Status Messaging
• Emergency Status
• Input / Output Status Messages
• FleetSync®GPS Ready
• Send GPS PF Key
• PTT ID & Emergency GPS Reporting
• Ignition On/Off GPS Reporting
MDC-1200
• PTT ID Digital ANI
• Emergency Status
• Radio Check
• Radio Inhibit
Options
Options
■ KMC-35
Microphone
(Supplied)
MC-36
■ K
Microphone
with Keypad
■ KMC-9C
Desktop Microphone
■ KES-3
External Speaker
ES-5
■ K
External Speaker
(requires KCT-60 option)
MB-10
■ K
ey Lock Adapter
K
Specifications
Model TK-7302V TK-7302HV TK-8302U TK-8302HU
GENERAL
Frequency Range 136-174 MHz 450-520 MHz
Number of Channels
one 2
Z
Channel Max. 16
hannel Spacing 25 kHz/12.5 kHz
C
Operating Voltage 13.6V DC±15%
Current Drain
tandby 0.4 A
S
Receive 1.0 A
ransmit 8.0 A 14.0 A 8.0 A 14.0 A
T
Operating Temperature Range -22°F ~ +140°F (-30°C ~ +60°C)
Frequency Stability ±2.5 ppm (-30°C ~ +60°C)
Antenna Impedance 50 Ω
Dimensions (W x H x D)
Projections not included 6.3” x 1.7” x 5.4” (160 x 43 x 137 mm)
Weight (Net) 41.6oz (1,180g)
FCC ID K44407600 K44407601 K44407700 K44407702
Specifications are subject to change without notice, due to advancements in technology.
®
FleetSync
is a registered trademark of JVC KENWOOD Corporation in the United States and/or other countries.
®
Windows
is a registered trademark of Microsoft Corporation in the United States and other countries.
All other trademarks are property of their respective owners.
■ KLF-2
Line Filter
■ KCT-18
Ignition Sense Cable
(requires KCT-60 option)
■ KCT-36
3m Extension Cable
(for KCT-60)
ll accessories and options may not be available in all markets.
A
Contact an authorized Kenwood dealer for details and complete list of all accessories and options.
odel TK-7302V TK-7302HV TK-8302U TK-8302HU
M
ECEIVER
R
Sensitivity (12dB SINAD)
Selectivity
Intermodulation Distortion
Spurious Response 75 dB
udio Output (4 ΩImpedance) 4 W with less than 5% distortion
A
TRANSMITTER (Measurements made per TIA/EIA-603)
RF Power Output 5 W
Spurious Response 70 dB
Type of Emission
FM Hum & Noise
Microphone Impedance 600 Ω
Audio Distortion Less than 5%
*1: 490 ~ 512 MHz: 5 ~ 40 W, 512 ~ 520 MHz: 5 ~ 35 W
Measurements made per TIA/EIA-603)
(
Wide 0.28 µV
arrow 0.35 µV
N
Wide 75 dB
arrow 65 dB
N
ide 70 dB
W
Narrow 60 dB
Wide 16KØF3E
Narrow 11KØF3E
Wide 45 dB
Narrow 40 dB
~ 25 W
■ KCT-60
DB 15-to-15 Pin
Molex Adaptor Cable
5 W
~ 50 W
5 W
~ 25 W
5 W
~ 45 W*
1
Applicable MIL-STD & IP
Standard MIL 810C MIL 810D MIL 810E MIL 810F
Low Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, II
High Temperature 501.1/Procedure I, II 501.2/Procedure I, II 501.3/Procedure I, II 501.4/Procedure I, II
Low Temperature 502.1/Procedure I 502.2/Procedure I, II 502.3/Procedure I, II 502.4/Procedure I, II
Temperature Shock 503.1/Procedure I 503.2/Procedure I 503.3/Procedure I 503.4/Procedure I, II
Solar Radiation 505.1/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure I
2
Rain*
Humidity 507.1/Procedure I, II 507.2/Procedure II, III 507.3/Procedure II, III 507.4
2
Salt Fog*
2
Dust*
Vibration 514.2/Procedure VIII, X 514.3/Procedure I 514.4/Procedure I 514.5/Procedure I
Shock 516.2/Procedure I, II, III, V 516.3/Procedure I, IV, V 516.4/Procedure I, IV, V 516.5/Procedure I, IV, V
International Protection Standard
Dust & Water Protection*
*2: These MIL-STD and IP54 complian ce catego ries requ ire a KMC-35/36 microphone to be connect ed; the DB-15 c onnector to have supplied cover installed and KCT-xx cab les or external speakers installed .
2
Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures
506.1/Procedure I, II 506.2/Procedure I, II 506.3/Procedure I, II 506.4/Procedure I, III
509.1/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4
510.1/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, III
IP54
ADS#28012 Printed in USA
Loading...