Kenwood TK-7360HV, TK-8360HU User Manual
TK-7360HV/8360HU
Compact VHF/UHF FM Mobile Radios
V2.0
GENERAL FEATURES
• 50 W (136-174 MHz) Model
• 45 W (450-520 MHz) Model
• Conventional & LTR®Zones
• 10-Character Alphanumeric Aliases
• Backlit LCD & Keys
• Function/Status LCD Icons
• Blue Function / Status LED
• Transmit /Busy / Call Alert LED
• 10 Programmable Function Keys
• Emergency / AUX Key
• Front Panel Speaker
• Companded Audio
• Voice Inversion Scrambler Built-in
• 16 Scrambler Codes (per CH)
• Encryption / Board Control
• Emergency Call Features
• Lone Worker Alert
• DTMF Encode / Decode
• Special Alert Tone Patterns
• Busy Channel Lockout
• Time Out Timer
• Timed Power Off
• DB15 Accessory Interface
• 8 Programmable I/O Ports
• Ignition Sense
• Public Address / Horn Alert Output
• MIL-Spec Standard Mic
• MIL-Spec 12-Key DTMF Mic Option
• Windows®Programming & Tuning
• Easy Option Ports (26-pin)
• Cloning
• Voice Guide & Storage (Option)
• MIL-STD-810 C/D/E/F/G
• IP54 Water & Dust Intrusion
CONVENTIONAL ZONES
• 128 Channels / 128 Zones
• QT / DQT
• Two-Tone Decode
• Single & Two-Tone Encode
• Operator Selectable Tone
• Single Priority Scan
• Single / Multi-Zone Scan
TRUNKED ZONES
• 128 GID / 128 Zones
• Kenwood LTR®Feature
FleetSync®/II (FM)
• PTT ID Digital ANI
• Selective Call & Group Call
• Paging Call
• Status Messaging
• Emergency Status
• Caller ID Display
• Input / Output Status Messages
• FleetSync®GPS Ready
• Send GPS PF Key
• PTT ID & Emergency GPS Reporting
• GPS Auto Reporting
MDC-1200
• PTT ID Digital ANI
• Caller ID Display
• Emergency Status
• Radio Check
• Radio Inhibit
Options
■ KMC-35
Microphone
(Supplied)
■ KMC-36
icrophone
M
ith Keypad
w
■ KMC-9C
esktop Microphone
D
■ KES-3
External Speaker
■ KES-5
xternal Speaker
E
requires KCT-60 option)
(
■ KMB-10
ey Lock Adapter
K
Specifications
odel TK-7360HV TK-8360HU
M
ENERAL
G
Frequency Range 136~174 MHz 450~520 MHz
Number of Channels
Zone Max.128 per Radio
h/GID Max.128 per Zone
C
hannel Spacing
C
Wide 25 kHz 25 kHz
arrow 12.5 kHz 12.5 kHz
N
perating Voltage 13.6 V DC±15 %
O
Current Drain
tandby 0.4 A 0.4 A
S
Receive 1.0 A 1.0 A
Transmit 14.0 A 14.0 A
Operating Temperature Range
Frequency Stability ±2.5 ppm (-22 ºF ~ +140 ºF)
Antenna Impedance 50
Channel Frequency Spread 38 MHz 70 MHz
Dimensions (W x H x D), 6.3” x 1.7” x 5.4”
Projections not included (160 mm x 43 mm x 137 mm)
Weight (net) 2.6 lbs. (1.18 kg)
FCC ID K44415401 K44415502
Specifications are subject to change without notice, due to advancements in technology.
FleetSync®is a registered trademark of JVC KENWOOD Corporation.
®
is a registered trademark of Transcrypt International.
LTR
®
Windows
is a registered trademark of Microsoft Corporation in the United States and other countries.
All other trademarks are property of their respective owners.
-22 ºF ~ +140 ºF (-30 ºC ~ +60 ºC)
Ω
■ KLF-2
Line Filter
■ KCT-18
gnition Sense Cable
I
requires KCT-60 option)
(
■ KCT-36
m Extension Cable
3
for KCT-60)
(
ll accessories and options may not be available in all markets. Contact an authorized
A
Kenwood dealer for details and complete list of all accessories and options.
■ KCT-60
DB 15-to-15 Pin
Molex Adaptor Cable
GS-1
■ V
Voice Storage Unit
(uses 26p connector)
Model TK-7360HV TK-8360HU
RECEIVER (Measurements made per EIA/TIA-603)
ensitivity (12dB SINAD)
S
ide 0.28 µV
W
Narrow 0.35 µV
electivity
S
Wide 75 dB
arrow 65 dB
N
ntermodulation Distortion
I
Wide 70 dB
Narrow 65 dB
Spurious Response 75 dB
Audio Output
mpedance) 4 W with less than 5 % distortion
(4 Ω
I
TRANSMITTER (Measurements made per EIA/TIA-603)
RF Output Power 5 W / 25 W / 50 W 5 W / 25 W / 45 W
Spurious Response 70 dB
Type of Emission
Wide 16K0F3E
Narrow 11K0F3E
FM Hum & Noise
Wide 45 dB
Narrow 40 dB
Microphone Impedance 600
Audio Distortion
Wide 3 %
Narrow 5 %
*1: 490 ~ 512 MHz: 5/ 25/40 W, 512 ~ 520 MHz: 5 /25/35 W
Ω
1
*
Applicable MIL-STD & IP
Standard MIL 810C MIL 810D MIL 810E MIL 810F MIL 810G
Low Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, II 500.5/Procedure I, II
High Temperature 501.1/Procedure I, II 501.2/Procedure I, II 501.3/Procedure I, II 501.4/Procedure I, II 501.5/Procedure I, II
Low Temperature 502.1/Procedure I 502.2/Procedure I, II 502.3/Procedure I, II 502.4/Procedure I, II 502.5/Procedure I, II
Temperature Shock 503.1/Procedure I 503.2/Procedure I 503.3/Procedure I 503.4/Procedure I, II 503.5/Procedure I
Solar Radiation 505.1/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure I 505.5/Procedure I
2
*
Rain
Humidity 507.1/Procedure I, II 507.2/Procedure II, III 507.3/Procedure II, III 507.4 507.5/Procedure II
2
*
Salt Fog
2
*
Dust
Vibration 514.2/Procedure VIII, X 514.3/Procedure I 514.4/Procedure I 514.5/Procedure I 514.6/Procedure I
Shock 516.2/Procedure I, II, III, V 516.3/Procedure I, IV, V 516.4/Procedure I, IV, V 516.5/Procedure I, IV, V 516.6/Procedure I, IV, V
International Protection Standard
Dust & Water Protection IP54: Radio itself
*1: Neces sary co nditions are: (1) KMC-35/3 6 microph one is connected; (2) c ap is installed on spea ker conne ctor;
(3) cover is in stalled o n D-sub 15-pin connector; and (4) neither KCT cabl e nor SP cable is co nnected.
Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures
506.1/Procedure I, II 506.2/Procedure I, II 506.3/Procedure I, II 506.4/Procedure I, III 506.5/Procedure I, III
509.1/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4 509.5
510.1/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, III 510.5/Procedure I
ADS#58711 Printed in USA
Loading...