Before reading this manual, click the button below to check the latest edition and the
modified pages.
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new
GPS Navigation System.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space
provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or
service on the product.
Model DNX7180/ DNX7480BT/ DNX6980/ DNX6180/ DNX6040EX/ DNX6480BT/ DNX5180 Serial number
US R esi de nce O nl y
Reg ister Online
Register your Kenwood product at www. Kenwoo dusa. com
Thank you for purchasing the KENWOOD GPS NAVIGATION SYSTEM.
In this manual, you will learn various convenient functions of the system.
Click the icon of the media you want to play.
With one-click, you can jump to the section of each media!
iPodUSB
Disc Media
Music CD
BT AudioPandora
VCD
DVD VIDEO
Tuner
HD Radio
SIRIUSXM
1
Contents
Before Use 4
How To Read This Manual 5
Basic Operations 6
Functions Of The Buttons
On The Front Panel __________________ 6
Turning On The Unit _________________ 10
How To Play Media __________________ 13
Operating With The Top Menu Screen ___ 14
Common Operations ________________ 16
Navigation Operation ________________ 18
DVD/Video CD (VCD)
Operation 20
DVD/VCD Basic Operation ____________ 20
DVD Disc Menu Operation ____________ 23
Zoom Control For DVD And VCD _______ 24
DVD Setup ________________________ 25
CD/Audio And Visual Files
/iPod Operation 28
Music/Video/Picture Basic Operation ___ 28
Search Operation ___________________ 34
Movie Control ______________________ 39
PANDORA® internet radio Operation ____ 40
USB/iPod/DivX Setup ________________ 42
Radio, HD Radio™ And
Satellite Radio Operation 44
Radio/HD Radio Basic Operation _______ 44
SIRIUS/XM Basic Operation ___________ 46
Memory Operation __________________ 48
Selecting Operation _________________ 48
Traffic Information (FM Tuner Only) _____ 50
Receive Mode (HD Radio only) ________ 51
iTunes Tagging (HD Radio only) ________ 51
SIRIUS Setup _______________________ 52
Bluetooth Control 55
Registering And Connecting
Bluetooth Unit _____________________ 55
Playing Bluetooth Audio Device
_____________________ 58
Using Hands-Free Unit _______________ 59
Bluetooth Setup ____________________ 62
Hands-Free Control _________________ 63
Setting Up 70
Monitor Screen Setup _______________ 70
System Setup ______________________ 71
Display Setup ______________________ 74
Navigation Setup ___________________ 77
Camera Setup ______________________ 78
Software Information ________________ 79
AV Input Setup _____________________ 79
AV Output Interface Setup ____________ 80
External Device Control
________ 80
Controlling Audio 81
Setting Audio ______________________ 81
Controlling General Audio ____________ 84
Equalizer Control ___________________ 85
Zone Control _______________________ 87
Space Enhancer
Listening Position
______________ 88
____________ 88
Remote Controller 90
Battery Installation __________________ 90
Functions Of The Remote Controller
Buttons ___________________________ 91
22
Troubleshooting 94
Problems And Solutions ______________ 94
Error Messages _____________________ 95
Resetting The Unit __________________ 97
Appendix 98
Playable Media And Files _____________ 98
Status Bar Indicator Items ____________ 101
Region Codes In The World ___________ 103
DVD Language Codes _______________ 104
Specifications ______________________ 105
About This Unit _____________________ 108
3
Return to the Top page
Before Use
Before Use
2 WARNING
To prevent injury or fire, take
the following precautions:
• To prevent a short circuit, never put or
leave any metallic objects (such as coins or
metal tools) inside the unit.
• Do not watch or fix your eyes on the unit’s
display when you are driving for any
extended period.
• If you experience problems during
installation, consult your Kenwood dealer.
Precautions on using this unit
• When you purchase optional accessories,
check with your Kenwood dealer to make
sure that they work with your model and in
your area.
• You can select language to display menus,
audio file tags, etc. See Language setup
(P.72).
• The Radio Data System or Radio Broadcast
Data System feature won’t work where
the service is not supported by any
broadcasting station.
Protecting the monitor
Lens fogging
When you turn on the car heater in cold
weather, dew or condensation may form
on the lens in the disc player of the unit.
Called lens fogging, this condensation on
the lens may not allow discs to play. In such
a situation, remove the disc and wait for the
condensation to evaporate. If the unit still
does not operate normally after a while,
consult your Kenwood dealer.
Precautions on handling discs
• Do not touch the recording surface of the
disc.
• Do not stick tape etc. on the disc, or use a
disc with tape stuck on it.
• Do not use disc type accessories.
• Clean from the center of the disc and move
outward.
• When removing discs from this unit, pull
them out horizontally.
• If the disc center hole or outside rim has
burrs, use the disc only after removing the
burrs with a ballpoint pen etc.
• Discs that are not round cannot be used.
To protect the monitor from damage, do not
operate the monitor using a ball point pen or
similar tool with the sharp tip.
Cleaning the unit
If the faceplate of this unit is stained, wipe it
with a dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the
stain off with a cloth moistened with neutral
cleaner, then wipe it again with a clean soft
dry cloth.
• Applying spray cleaner directly to the unit
may affect its mechanical parts. Wiping the
faceplate with a hard cloth or using a volatile
liquid such as thinner or alcohol may scratch
the surface or erase screened print.
44
• 8-cm (3 inch) discs cannot be used.
• Discs with coloring on the recording
surface or discs that are dirty cannot be
used.
• This unit can only play the CDs with
.
This unit may not correctly play discs which
do not have the mark.
• You cannot play a disc that has not been
finalized. (For the finalization process see
your writing software, and your recorder
instruction manual.)
How To Read This Manual
Return to the Top page
How To Read This Manual
Return to the Top page
CD, Disc, iPod, USB device
Search Operation
You can search the music, video, or picture
le by some operations.
NOTE
• If you use a remote controller, you can jump
directly to the desired track/le with entering the
track/folder/le number, play time, etc. For details,
see “Direct search mode” (p.81).
List search
You can search tracks, folders, and les
according to hierarchy.
For USB devices and iPods, you can list and
search les in the device by using playlist.
Press the <MENU> button during
1
playback.
Simple Control screen appears.
Touch [ ].
2
List Control screen appears.
Touch desired track/le.
3
Link header
You can refer each section or top page
with one-click.
Operation title
Introduces the function.
NOTE
Introduces some tips, notes, etc.
Reference mark
Displayed in blue notes.
With one-click, you can jump to the
article related to the current section.
Operation procedure
Explains necessary procedures to
achieve the operation.
< >: Indicates the name of panel
buttons.
[ ]: Indicates the name of touch
keys.
Screen shot
Shows some screen shots displayed during
operation for reference.
The area or keys to touch are surrounded
with a red frame.
Playback starts.
Other search
When you want to narrow the list down,
there are other search ways.
Press the <MENU> button during
1
playback.
Simple Control screen appears.
Touch [ ].
2
The search type screen appears.
27
NOTE
• The screens and panels shown in this
manual are examples used to provide clear
explanations of the operations.
For this reason, they may be different from the
actual screens or panels used, or some display
patterns may be different.
5
Return to the Top page
Basic Operations
Basic Operations
Functions Of The Buttons On The Front Panel
DNX7180/DNX7480BT
10
11
123456789
NOTE
• The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason,
they may be different from the actual panels.
• In this manual, each model name is abbreviated as follows.
DNX7180 and DNX7480BT:
If above icon is showed, read the article applicable to the unit you use.
How To Insert An SD Card
1) Press 8 <0> button for 3 seconds.
The panel fully opens.
2) Hold the SD card as the diagram in the right and
insert it into the slot until it clicks.
To eject the card:
Push the card until it clicks and then remove your finger
from the card.
The card pops up so that you can pull it out with your
fingers.
66
Labelled
side
0
NumberNameMotion
1
2
6
7
10
fi (Reset)• If the unit or the connected unit fails to operate properly, the unit
ATT• Switches attenuation of the volume on/off.
∞, 5 (Vol)Adjusts volume.
3
AUD• Displays Graphic Equalizer screen (P.86).*
4
NAV• Displays the navigation screen.
5
MENU• Displays the Top Menu screen (P.14).
TEL• Displays the Hands Free screen (P.55).
0 (Eject)• Ejects the disc.
8
Remote
9
Sensor
Disc insert
slot
SD card slotAn SD card slot for upgrading the map. For how to upgrade the map, refer
11
returns to factory settings when this button is pressed (P.97).
• If the SI function is turned on, this indicator flashes when the vehicle
ignition is off (P.72).
• North America Sales area: Pressing for 1 second stores the tag data of
the current music from HD Radio (P.51).
• Central and South America sales area: Pressing for 1 second turns the
screen off.
Holding down a key turns up the volume in series up to 25. For more than
25, pressing the key turns up the volume one by one.
• Pressing for 1 second switches camera view display on/off.
• Pressing for 1 second switches AV out sources.
• When the power off, turns the power on.
• Pressing for 1 second turns the power off.
• When the power off, turns the power on.
• Pressing for 1 second displays the Screen Control screen.
• When the power off, turns the power on.
• Pressing for 1 second opens the panel to the location of the disc slot.
When the panel is opened, pressing for 1 second closes the panel and
pressing for 3 seconds ejects the disc forcibly.
• When the panel is closed, pressing for 3 seconds fully opens the panel to
the location of the SD card slot.
Receives the remote control signal.
You can enable or disable this feature by Remote Sensor (P.71).
A slot to insert a disc media.
to the instruction manual of the navigation system.
Return to the Top page
Basic Operations
* The display may not switch to the Graphic Equalizer screen in some conditions.
7
Return to the Top page
2
3
Basic Operations
DNX6980/DNX6180/DNX6040EX/DNX6480BT/DNX5180
1 798
DNX6480BT
4
5
6
NOTE
• The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason,
they may be different from the actual panels.
• In this manual, each model name is abbreviated as follows.
DNX6980, DNX6180, DNX6040EX, and DNX6480BT:
DNX5180:
If above icons are showed, read the article applicable to the unit you use.
10
DNX6480BT
DNX6980
How To Insert A MicroSD Card
1) Open the
as the diagram in the right.
2) Hold the microSD card with the label
side facing left and the notched
section up and insert it into the slot
until it clicks.
To eject the card:
Push the card until it clicks and then remove
your finger from the card.
The card pops up so that you can pull it out
with your fingers.
10
microSD card slot cover
88
NumberNameMotion
1
2
3
4
6
7
fi (Reset)• If the unit or the connected unit fails to operate properly, the unit
MENU• Displays the Top Menu screen (P.14).
NAV• Displays the navigation screen.
TEL• Displays the Hands Free screen (P.55).
Volume Knob • Pressing switches attenuation of the volume on/off.
5
SCRN• Displays the Screen Control screen.
Remote
Sensor
0 (Eject)• Ejects the disc.
8
Disc insert
9
slot
MicroSD
10
card slot
returns to factory settings when this button is pressed (P.97).
• If the SI function is turned on, this indicator flashes when the vehicle
ignition is off (P.72).
• Pressing for 1 second turns the power off.
• When the power off, turns the power on.
• Pressing for 1 second switches AV out sources.
• North America Sales area: Pressing for 1 second stores the tag data of
the current music from HD Radio (P.51).
• Central and South America sales area: Pressing for 1 second turns off
the display.
• Turning adjusts volume up or down.
• Pressing for 1 second displays Tone Control screen (P.87).*
• Pressing for 1 second displays rear view camera display.
Receives the remote control signal.
You can enable or disable this feature by Remote Sensor (P.71).
• Pressing for 1 second ejects the disc forcibly.
A slot to insert a disc media.
A microSD card slot for upgrading the map. For how to upgrade the map,
refer to the instruction manual of the navigation system.
Return to the Top page
Basic Operations
* The display may not switch to the Tone Control screen in some conditions.
9
Return to the Top page
Basic Operations
Turning On The Unit
The method of turning on is different depending on the model.
Press the <NAV>, <MENU>, or <TEL> button.
1
The unit is turned on.
To turn off the unit:
Press the <MENU> button for 1 second.
Press the <MENU> button.
1
The unit is turned on.
To turn off the unit:
Press the <MENU> button for 1 second.
If it is your first time turning the unit on after installation, it will be necessary to perform
Initial setup (P.11).
1010
Return to the Top page
Basic Operations
Initial setup
Perform this setup when you use this unit first time or when you reset the unit (P.97).
Set each item as follows.
1
Language
Select the language used for the control screen and setting items. Default is “American English (en)”.
1 Touch [SET].
2 Touch [2] or [3] to select the desired language.
3 Touch [Enter].
For detailed operation, see Language setup (P.72).
Angle
Adjust the position of the monitor. Default is “0”.
1 Touch [SET].
2 Touch desired angle number and [
For detailed operation, see Monitor angle control (P.74).
iPod AV Interface Use
Set the terminal which your iPod is connected to. Default is “iPod”.
1 Touch [iPod] or [AV-IN2].
Color
Set the screen and button illumination color. You can select whether to allow color scan operation or
select a fixed color for operation.
1 Touch [SET].
2 Touch [ON] or [OFF] of [Panel Color Scan].
3 If you want to change color, touch [SET] of [Panel Color Coordinate].
4 Touch your desired color and [
For detailed operation, see Panel color coordinate (P.75).
EXT SW
Control the external devices.
1 Touch [SET].
2 Set device name, output pattern, and pulse set for each device. Then, touch [
For detailed operation, see EXT SW setup (P.73).
Camera
Set the parameters for the camera.
1 Touch [SET].
2 Set each item and touch [
For detailed operation, see Camera Setup (P.78).
].
].
].
].
Continued
11
Return to the Top page
Basic Operations
Touch [Finish].
2
NOTE
• These settings can be set from the SETUP menu. See Setting Up (P.70).
1212
Return to the Top page
Basic Operations
How To Play Media
Music CD and disc media
Press the <0> button for 1 second.
1
The panel opens.
Insert the disc into the slot.
2
The panel closes automatically.
The unit loads the disc and playback
starts.
To eject the disc:
Press the <0> button when the panel is
closed.
Insert the disc into the slot.
1
To eject the disc:
Press the <0> button.
USB device
Connect the USB device with the
1
USB cable.
The unit reads the device and playback
starts.
To disconnect the device:
Touch [0] for 1 second on the screen and
disconnect the device from the cable.
iPod
Connect the iPod with the iPod
1
cable.
The unit loads the disc and playback
starts.
The unit reads the iPod and playback
starts.
To disconnect the device:
Touch [ ] on the screen and then touch
[0] for 1 second. Disconnect the iPod
from the cable.
13
Return to the Top page
Basic Operations
Operating With The Top Menu Screen
Most functions can be performed from the Top Menu screen.
Touch [Menu] on any screen.
1
Top Menu screen appears.
NOTE
• If [Menu] is not
displayed during
video/picture
playback, press the
<MENU> button.
(P.6, P.8)
NOTE
• You can select the
hiding icon by
scrolling the screen
left or right.
From this screen, you can perform the following functions.
FunctionIconOperation
Switch the audio source
etc.
Enter setup mode
etc.
Display navigation
screen
or
Turn off all audio
function
1414
Touch the icon of the
desired source.
Touch the icon of the
desired setup function.
Touch [NAV] or
navigation information.
Touch [STANDBY].
Customizing Top Menu screen
Drag the icon you want to register to the
upper line.
You can move up to three icons.
Return to the Top page
Basic Operations
15
Return to the Top page
Basic Operations
Common Operations
Introduces the common operations.
General
There are some functions which can be operated from most screens.
[Menu]
Returns to the Top Menu screen.
(RETURN)
Returns to previous screen.
(common menu key)
Touch to display the common menu. The
contents of the menu are as follows.
: Displays the EXT SW Control
screen.
: Displays the SETUP Menu screen.
: Displays the Audio Control Menu
screen.
: Displays the control screen of current
source. Icon feature differs depending
on the source.
: Closes the menu.
List screen
There are some common function keys in the list screens of most sources.
(Scroll)
Scrolls the displayed text.
etc.
Touch keys with various functions are
displayed here.
Displayed keys differ depending on the
current audio source, status, etc.
For examples of functions of each key, refer
to the table below.
1616
KeyFunction
Lists all the music in the lower hierarchy.
Moves to the upper hierarchy.
Displays current category folder.
Displays music/picture/movie file list.
Flick scrolling
You can scroll the list screen by flicking the screen up/down or right/left.
Return to the Top page
Basic Operations
17
Return to the Top page
Basic Operations
Navigation Operation
For details on the navigation function, please refer to the Navigation Instruction Manual.
Display the navigation screen
Press the <NAV> button.
1
The navigation screen appears.
Control audio from the navigation screen
You can control audio sources while the navigation screen is displayed.
Also, you can view the navigation information while the source control screen is displayed.
Touch the information bar.
1
The navigation screen with audio information appears.
1818
Touch [ ] or [ ] in the navigation screen.
2
Touching this area displays
the audio screen.
Return to the Top page
Basic Operations
: Displays the navigation and control
keys of the current source.
NOTE
• The screen switches between playback screen
• Touching the source icon in the bottom of the
To return to the full navigation screen:
Touch [ ].
NOTE
• For details on control keys, refer to the instructions in each section.
: Displays the navigation and current
video/picture playback display.
and camera view each time the viewing area is
touched.
screen displays the full audio screen.
19
Return to the Top page
234
1
7
8
DVD, VCD
DVD/Video CD (VCD) Operation
DVD/VCD Basic Operation
Most functions can be controlled from the source control screen and playback screen.
NOTE
• Set the remote controller mode switch to DVD mode before starting operation, see Switching the operation
mode (P.91).
• The screen shot below is for DVD. It may be different from the one for VCD.
Video screenControl screen
66
5
1 Information display
Displays the following information.
• Title #, Chap #: DVD title and chapter number display
• Track #/Scene #: VCD track or scene number display
*Scene # is displayed only when PBC is on.
• 3, ¡, ¢, 7, etc.: Current play mode display
The meanings of each icon are as follows; 3 (play), ¡ (fast forward), 1 (fast backward),
¢ (search up), 4 (search down), 7 (stop), 7R (resume stop), 8 (pause),
(slow reverse playback).
Touch this area to display the disc lable name.
2 Multi function key
Touch to switch the multi function menu. For details on the menu, see Multi function menu (P.22).
3 Multi function menu
Various functions can be performed by using keys in this area. For details on the keys, see Multi
function menu (P.22).
4 Control switching key
Unavailable in DVD/VCD source.
(slow playback),
2020
Return to the Top page
5 Sub function menu
The following functions can be performed by using keys in this area.
• Repeats the current content: Touch [
• Hides all keys: Touch [
• Fast forward or fast backward: Touch [1] or [¡]. Each time you touch the key, the speed
• Confirms play time: See #:##:##.
DVD: You can switch the time display between title play time, chapter play
VCD (PBC off): You can also confirm disc remaining time by touching time
• Confirms the current location: See the bar in center (DVD only). The bar does not appear when the
6 Searching area
Touch to search the next/previous content.
Scrolling from center of display to left or right performs fast backward or fast forward. Each time you
touch each area, the speed changes; standard, 2 times, 3 times. To stop fast backward/forward, touch
center of the display.
7 Menu display area
This area functions differently depending on the current status.
• During DVD playback: Displays the DVD menu. During the menu display, displays the highlight
• During VCD playback: Displays the Zoom Control screen (P.24).
8 Key display area
Touch to display the last control screen.
following sequence;
DVD: "title repeat" , "chapter repeat" , "function off "
VCD (PBC On): Does not repeat
VCD (PBC Off ): "track repeat" , "function off "
].
changes; standard, 2 times, 3 times.
time, and title remaining time. Each time you touch, the display switches
between “T #:##:##” (title play time display), “C #:##:##” (chapter play time
display), and “R #:##:##” (title remaining time display).
As well as the time display, the bar indicating current location appears.
time display is remaining time display.
control screen.
]. Each time you touch the key, repeat mode switches in the
display. Each time you touch, the display switches between “P
##:##” (play time display) and “R ##:##” (disc remaining time).
DVD, VCD
NOTE
• If you use a remote controller, you can jump directly to the desired image with entering the chapter number,
scene number, play time, etc (P.91).
21
Return to the Top page
DVD, VCD
Multi function menu
DVDVCD
The functions of each key are as follows.
[4] [¢]
Searches the previous/next content.
[38]
Plays or pauses.
[
] or [ ] (DVD only)
Plays in slow motion forward or backward.
[7]
Stops playback. When touched twice, the disc is played from the beginning when you play it the next
time.
[PBC] (VCD only)
Turn PBC on or off.
[
SETUP]
Touch to display the SETUP Menu screen. See Setting Up (P.70).
[
AUDIO]
Touch to display the Audio Control screen. See Controlling Audio (P.81).
[
EXT SW]
Touch to control the external device power supply. For details, see External Device Control (P.80).
2222
Return to the Top page
DVD, VCD
DVD Disc Menu Operation
You can set up some items in the DVD-VIDEO
disc menu.
Touch illustrated area during
1
playback.
Menu Control screen appears.
Perform desired operation as follows.
2
Displays the top menu
Touch [Top].*
Displays the menu
Touch [Menu].*
Displays the previous menu
Touch [Return].*
Enters selected item
Touch [Enter].
Enables direct operation
Touch [Highlight] to enter the highlight control
mode (P.23).
Moves the cursor
Touch [5], [∞], [2], [3].
Highlight control
Highlight control lets you control the DVD
menu by touching the menu key directly on
the screen.
Touch [Highlight] in the Menu Control
1
screen.
Touch desired item on the screen.
2
NOTE
• The highlight control is cleared automatically if
you do not operate for a constant time.
DVD Play Mode Setting
You can select DVD play mode.
Touch [Next] in the Menu Control
1
screen.
Menu Control 2 screen appears.
* These keys may not function depending on
the disc.
Continued
23
Return to the Top page
DVD, VCD
Touch the key which corresponds to
2
desired setting item.
Switches the subtitle language
Touch [Subtitle]. Each time you touch this key,
language is switched.
Switches the audio language
Touch [Audio]. Each time you touch this key,
language is switched.
Controls zoom ratio
Touch [Zoom]. For details, see step2 in Zoom
Control For DVD And VCD (P.24).
Switches the picture angle
Touch [Angle]. Each time you touch this key,
picture angle is switched.
Exits menu control
Touch [Exit].
Displays the Menu Control 1 screen
Touch [Previous].
NOTE
• For DVD, please refer to DVD Play Mode Setting
(P.23) to display the Zoom Control screen.
Perform desired operation as follows.
2
Switches zoom ratio
Touch [Zoom].
For DVD, changes the zoom ratio at 4 levels;
Off, 2 times, 3 times, 4 times.
For VCD, changes the zoom ratio at 2 levels;
Off, 2 times.
Scrolls the screen
Touch [5], [∞], [2], or [3] to scroll the screen
in the direction you touch.
Exits menu control
Touch [Exit].
Displays the previous menu*
Touch [Return].
Zoom Control For DVD And VCD
You can enlarge Playback screen for DVD and
VCD.
For VCD, touch illustrated area during
1
playback.
Zoom Control screen appears.
2424
* This function may not be performed
depending on the disc.
NOTE
• You cannot touch the menu keys directly on the
screen when zooming.
Return to the Top page
DVD, VCD
DVD Setup
You can set up the DVD playback functions.
NOTE
• Each operation in this section can be started from
the Top Menu screen. For details, see Operating
With The Top Menu Screen (P.14).
Touch [ ] in the control screen.
1
Multi function menu appears.
Touch [SETUP].
2
SETUP Menu screen appears.
Touch [Source].
3
Source SETUP Menu screen appears.
Touch [DVD SETUP] in the list.
4
DVD SETUP screen appears.
Set each item as follows.
5
Menu/Subtitle/Audio Language*
See Language setup (P.26).
Dynamic Range Control*
Sets the dynamic range.
Wide: The dynamic range is wide.
Normal: The dynamic range is normal.
Dialog (Default): Makes the total sound
volume larger than other
modes. This is effective only
when you are using Dolby
Digital software.
Angle Mark
Sets an angle mark display.
ON (Default): An angle mark appears.
OFF: An angle mark does not appear.
Screen Ratio*
Sets the screen display mode.
16:9 (Default): Displays wide pictures.
4:3 LB: Displays wide pictures in the Letter Box
format (having black stripes at the top
and bottom of screen).
4:3 PS: Displays wide pictures in the Pan &
Scan format (showing pictures cut at
the right and left ends).
Parental Level*
See Parental level (P.26).
DISC SETUP
See Disc setup (P.27).
Stream Information
Displays the present source information.
The stream (Dolby Digital, dts, Linear PCM,
MPEG, WMA or AAC) appears.
* These items are disabled when a DVD is
being played.
25
Return to the Top page
DVD, VCD
Language setup
This setting is for the language used in the
menu, subtitle, and voice. You cannot setup
these items during DVD playback.
Sets the entered language and returns to
the DVD SETUP screen.
NOTE
• To cancel the setup and return to the previous
screen, touch [Cancel].
• To clear the entered code, touch [Clear].
• To set the DVD’s original language for audio
language, touch [Original].
Parental level
Sets a parental level. You cannot setup this
item during DVD playback.
Touch [SET] of [Parental Level].
1
Parental Pass screen appears.
Enter the parental code and touch
2
[Enter].
Parental Level screen appears.
NOTE
• To cancel the setup and return to the previous
screen, touch [Cancel].
• To clear the entered code, touch [Clear].
• Current parental level appears as [Level#].
Touch [2] or [3] to select a parental
3
level.
NOTE
• If a disc has higher parental lock level, you need
to enter the code number.
• The parental lock level varies depending on a
loaded disc.
• If a disc has no parental lock, anybody can play it
back even when you have set the parental lock.
2626
Disc setup
Performs setup when using disc media.
Touch [SET] of [DISC SETUP].
1
DISC SETUP screen appears.
Select an option as follows.
2
CD Read
Sets the motion of this unit when a music CD
is played.
1 (Default): Automatically recognizes and plays
back an audio file disc, a DVD or a music CD.
2: Forcibly plays back a disc as a music CD.
Select [2] if you wish to play a music CD having
a special format or if you cannot play a disc in
[1] position.
On Screen DVD
Sets an on-screen display.
Auto: When updated, information appears for
5 seconds.
OFF (Default): Information does not appear.
Return to the Top page
DVD, VCD
NOTE
• [CD Read] is not available when a disc is in the
unit.
• You cannot play an audio file/VCD disc in the [2]
position. Also, you may not play some music CDs
in the [2] position.
27
Return to the Top page
2
3344586
7
1
CD, Disc, iPod, USB device
CD/Audio And Visual Files/iPod Operation
Music/Video/Picture Basic Operation
Most functions can be controlled from the source control screen and playback screen.
NOTE
• Set the remote controller mode switch to AUD mode before starting operation, see Switching the operation
mode (P.91).
• To connect iPod to this unit, optional accessory KCA-iP202 is necessary.
See the following sections for each source operation.
• Music CD (P.28)
• Disc media (P.28)
Music CD and disc media
NOTE
• In this manual, “Music CD” will be referred to as the general CDs which include music tracks in.
“Disc media” will be referred to as CD/DVD disc which includes audio, picture or video files.
• The screen shot below is for CD. It may be different from the one for disc media.
Simple Control screenList Control screen
• USB device (P.30)
• iPod (P.30)
2
1 Information display
Displays the following information.
• Track #: Each time you touch this area, display switches between current track number, text, etc.
• 3, ¡, ¢, 7, etc.: Current play mode display
2 Movie display area/Control switching area
Touch to switch between the Simple Control and List Control screen.
3 Multi function key
Touch to switch the multi function menu. For details on the menu, see Multi function menu (P.32).
The meanings of each icon are as follows; 3 (play), ¡ (fast forward), 1 (fast
backward), ¢ (search up), 4 (search down), 7 (stop), 7R (resume stop), 8
(pause).
2828
Return to the Top page
9
9
CD, Disc, iPod, USB device
4 Multi function menu
Various functions can be performed by using keys in this area. For details on the menu, see Multi
function menu (P.32).
5 Sub function key
Touch to display “Sub function menu” (7 in this table).
6 Track information
Displays the information of the current track.
For music CD and disc media, you can switch the current track information and the current folder list by
touching the list switching key (8 in this table).
However, only "No Information" is displayed for music CD.
7 Sub function menu
Various functions can be performed by using keys in this area. For details on the keys, see Sub function
menu (P.33).
8 List switching key
Touch to switch between the track list and the CD-TEXT display (CD)/ID3 tag information (disc media
only).
Video screen (disc media only)
10 11
9 Searching file area (disc media only)
Touch to search the next/previous file.
Scrolling from center of display to left or right performs fast backward or fast forward. Each time you
touch each area, the speed changes; standard, 2 times, 3 times. To stop fast backward/forward, touch
center of the display.
10
Menu display area (disc media only)
Touch to display the disc menu. For details, see Movie Control (P.39).
11
Key display area (disc media only)
Touch to display the last control screen.
29
Loading...
+ 81 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.