Kenwood BLP40 User Manual

English 2 - 8

TYPE BLP40

instructions

´¸∂w

9 - 41

HEAD OFFICE: Kenwood Limited, 1-3 Kenwood Business Park, New Lane, Havant, Hampshire PO9 2NH

127610/1

safety

햲

햳

햴

햵

햶

햷

햹

햺





햸

햻

햽

햾









햿

헀

Read these instructions carefully and retain for future reference.

Remove all packaging and any labels.

Switch off and unplug:

before fitting or removing parts;

when not in use;

before cleaning.

Never fit the blade unit to the power unit without the blender goblet or mill jar fitted.

Always unplug the appliance before putting your hands or utensils in the goblet.

Always take care when handling the blade assembly and avoid touching the cutting edge of the blades when cleaning.

Only operate the blender with the lid in place.

Only use the goblet with the blade assembly supplied.

Never let the power unit, cord or plug get wet.

Never use a damaged appliance. Get it checked or repaired: see ‘service and customer care’.

Never use an unauthorised attachment.

SCALD RISK: Hot ingredients should be allowed to cool to room temperature before blending.

Never leave the appliance unattended when it is operating.

When removing the blender or mill from the power unit:

wait until the blades have completely stopped;

don’t accidentally unscrew the goblet or mill jar/lid from the blade assembly.

Never run the blender empty.

Never blend more than the maximum capacity stated in the recommended usage chart.

To ensure long life of your blender and mills, do not run for longer than 60 seconds.

Smoothie recipes - never blend frozen ingredients that have formed a solid mass during freezing, break it up before adding to the goblet.

Do not process hard spices such as Nutmeg or Turmeric root as they may damage the blade.

Do not use the blender as a storage container. Keep it empty before and after use.

Always use the blender on a secure, dry level surface.

Never place this appliance on or near a hot gas or electric burner or where it could touch a heated appliance.

Misuse of your blender can result in injury.

This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.

Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.

Only use the appliance for its intended domestic use. Kenwood will not accept any liability if the appliance is subject to improper use, or failure to comply with these instructions.

before plugging in

Make sure your electricity supply is the same as the one shown on the underside of the appliance.

Important - UK only

The wires in the cord are coloured as follows: Blue = Neutral Brown = Live.

The appliance must be protected by a 13A approved (BS1362) fuse.

Note:

For non-rewireable plugs the fuse cover MUST be refitted when replacing the fuse. If the fuse cover is lost then the plug must not be used until a replacement can be obtained. The correct fuse cover is identified by colour and a replacement may be obtained from your Kenwood Authorised Repairer (see Service).

If a non-rewireable plug is cut off it must be DESTROYED IMMEDIATELY. An electric shock hazard may arise if an unwanted non-rewireable plug is inadvertently inserted into a 13A socket outlet.

This appliance conforms to EC directive 2004/108/EC on Electromagnetic Compatibility and EC regulation no. 1935/2004 of 27/10/2004 on materials intended for contact with food.

before using for the first time

Wash the parts: see ‘care and cleaning’.

key

blender

 filler cap  locking lid  goblet  blender sealing ring  blender blade unit  power unit  cord storage  speed + pulse control  ice crushing button

multi mill (if supplied)

 multi mill jar  multi mill sealing ring  multi mill blade unit

grinding mill (if supplied)

 mill lid  grinding mill blade assembly

to use your blender

Use your blender for soups, drinks, pâtés, mayonnaise, breadcrumbs, biscuit crumbs, chopping nuts and crushing ice.

1 Fit the blender sealing ring  into

the blender blade unit  - ensuring the seal is located correctly in the grooved area.

Leaking will occur if the seal is damaged or incorrectly fitted.

2 Screw the blade assembly onto the

goblet – ensuring the blade assembly is fully tightened to the graphics on the underside of the blade unit as follows:

- unlocked position

- locked position 3 Put your ingredients into the goblet. 4 Put the filler cap in the lid. 5 Fit the lid to the goblet and turn

clockwise to lock.

. Refer

.

he processing of spices is not

ecommended as they may damage

r the plastic parts.

hen making mayonnaise, put all

he ingredients, except the oil, into

t the blender. Remove the filler cap.

hen, with the appliance running,

dd the oil slowly through the hole in

a the lid.

Thick mixtures, e.g. pâtés and dips, may need scraping down. If the mixture is difficult to process, add more liquid.

Place the blender onto the power

nit with the handle situated to the

u right hand side and lock by turning

lockwise until you hear a “click”

he appliance will not work if

T the blender is incorrectly

itted.

Select a speed (refer to the

recommended usage chart).

blender hints

To blend dry ingredients - cut into pieces, remove the filler cap, then with the appliance running, drop the pieces down one by one. Keep your hand over the opening. For best results empty regularly.

blender recommended usage chart

speed usage/food items max. quantity

1 Frothing milk 1 litre

Light mixes e.g. batters, milkshakes, scrambled egg 1 litre

2 - 3 Soups & drinks 1.6 litres

Thicker mixes e.g. pâtés

Mayonnaise 3 eggs +

Smoothie drinks Place the fresh fruit and liquid ingredients in 800ml first (includes yoghurt, milk and fruit juices) liquid Then add ice or frozen ingredients (includes frozen fruit, ice or ice cream)

Ice crushing - operate in short bursts until 6 cubes crushed to the desired consistency. (125g)

450ml oil

(P) Operates the motor in a start/stop action.

pulse The pulse will operate for as long as it is held in –

position.

to use your multi mill

(if supplied)

Use your multi mill for milling herbs, nuts, coffee beans and purees.

1 Put your ingredients into the jar .

Fill it no more than half full.

2 Fit the multi mill sealing ring  into

the multi mill blade unit  - ensuring the seal is located correctly in the grooved area.

Ensure that the seal is fitted correctly.

3 Turn the blade unit

Lower it into the jar, blades down

 upside down.

. Turn anti-clockwise to lock.

4 Place the mill onto the power unit

and lock by turning clockwise until you hear a “click”

5 Select a speed or use the pulse

control.

.

+ 9 hidden pages