OPERATOR
M A N U A L
Kent
SelectScrub™
KA-27, KA-33, KA-39
Models 56636998, 56637002, 56637005
4/99 Form Number 56041444(083396)
TABLE OF CONTENTS
_____________________________________________________________________________________________________________________________
Page
MACHINE SPECIFICATIONS ...................................................................................... |
2,3 |
ACCESSORIES ............................................................................................................... |
3 |
INTRODUCTION ............................................................................................................. |
4 |
IMPORTANT SAFETY INSTRUCTIONS ......................................................................... |
5 |
SET UP ............................................................................................................................ |
6 |
OPERATION .................................................................................................................... |
7 |
CONTROLS ..................................................................................................................... |
7 |
SOLUTION ...................................................................................................................... |
8 |
CLEAN UP AND STORAGE .......................................................................................... |
10 |
MAINTENANCE ............................................................................................................. |
11 |
BATTERY CHARGING .................................................................................................. |
12 |
BATTERY CARE ........................................................................................................... |
12 |
BATTERY SERVICE & GUARANTEE ........................................................................... |
12 |
LINT SCREEN ............................................................................................................... |
13 |
MICROSTAT™ FILTER ................................................................................................. |
13 |
REVERSING THE SQUEEGEE RUBBER .................................................................... |
13 |
SQUEEGEE RUBBER REPLACEMENT ....................................................................... |
13 |
TROUBLE SHOOTING GUIDE ..................................................................................... |
14 |
1 - FORM NO. 56041444 / SELECTSCRUB KA-27, KA-33, KA-39
Noise Level:
Controls:
Traction Motor:
Vacuum Motor:
Brush Motors:
Traction Drive:
Brushes:
Scrubbing Width:
Brush Pressure
Floating:
Strip:
Tanks
Solution:
Recovery:
Material:
Batteries:
Squeegee:
Wheels
Traction Wheel:
Caster Wheels:
Solution Feed:
Vacuum Shut off Switch: Frame:
Outer Shell:
MACHINE SPECIFICATIONS
SELECTSCRUB KA-27SS SELECTSCRUB KA-33SS SELECTSCRUB KA-39SS
73dB @ 10’ |
73dB @ 10’ |
Light effort, PUSH/PULL dead man |
Light effort, PUSH/PULL dead man le- |
lever for forward or reverse operation. |
ver for forward or reverse operation. |
Instrument panel with rocker switches |
Instrument panel with rocker switches |
and variable speed control knob. Easy |
and variable speed control knob. Easy |
access squeegee lift lever with auto- |
access squeegee lift lever with auto- |
matic vacuum control. |
matic vacuum control. |
24V, 3/4HP, 195 rpm, permanent mag- |
36V, 3/4HP, 195 rpm, permanent mag- |
net gear motor. |
net gear motor. |
24V, 3-stage, by-pass type, tangential |
36V, 3-stage, by-pass type, tangential |
discharge. Develops 67"H O sealed |
discharge. Develops 74"H O sealed lift, |
2 |
2 |
lift, and 67 CFM through a 1-1/2" ori- |
and 72 CFM through a 1-1/2" orifice. |
fice. |
|
Two 24V, 3/4HP, 195 rpm, permanent |
Two 36V, 3/4HP, 195 rpm, permanent |
magnet gear motor. Direct drive to |
magnet gear motor. Direct drive to self- |
self-leveling brushes. |
leveling brushes. |
All electronic control variable speed |
All electronic control variable speed |
drive. Featuring dynamic braking for |
drive. Featuring dynamic braking for |
easy control up and down ramps. |
easy control up and down ramps. |
Dual 14" (35.6cm) dia., self-leveling, counter-rotating, 195 rpm.
27" (68.6cm).
115 lbs. (52.2Kg)
180 lbs. (81.7Kg)
Maximum will vary depending upon floor surface and pad or brush used. Current limit of brush drive motor must not be exceeded.
22 gallon (83.3L)
22 gallon (83.3L)
High-density, molded seamless linear polyethylene.
Four (4) heavy-duty deep cycle type, 6V, 250 AH, series connected.
35.8" (90.9cm) wide swinger type with welded-in vacuum tube, easily replaceable gum rubber blades (reversible for extended wear), accurate, pressure and tilt adjustments. Pivot makes squeegee self-leveling on turns.
One (1) 10" (25.4cm) dia. molded. Two (2) 5" (12.7cm) polyurethane swivels with 750 lbs. capacity. Two-speed solution pump and solenoid valve controls the flow rate to center of each brush.
Float Switch
All welded steel 7 Ga. and 11 Ga. with epoxy powder coating.
High-density molded polyethylene tanks and covers.
Dual 17" (43.2cm) dia., self-leveling, counter-rotating, 195 rpm.
33" (83.8cm).
125 lbs. (56.7Kg)
200 lbs. (90.7Kg)
Maximum will vary depending upon floor surface and pad or brush used. Current limit of brush drive motor must not be exceeded.
30 gallon (113.6L)
30 gallon (113.6L)
High-density, molded seamless linear polyethylene.
Six (6) heavy-duty deep cycle type, 6V, 200 AH, series connected.
41.5" (105.4cm) wide swinger type with welded-in vacuum tube, easily replaceable gum rubber blades (reversible for extended wear), accurate, pressure and tilt adjustments. Pivot makes squeegee self-leveling on turns.
One (1) 10" (25.4cm) dia. molded. Two (2) 5" (12.7cm) polyurethane swivels with 750 lbs. capacity.
Two-speed solution pump and solenoid valve controls the flow rate to center of each brush.
Float Switch
All welded steel 7 Ga. and 11 Ga. with epoxy powder coating.
High-densitymoldedpolyethylenetanks and covers.
73dB @ 10’
Light effort, PUSH/PULL dead man lever for forward or reverse operation. Instrument panel with rocker switches and variable speed control knob. Easy access squeegee lift lever with automatic vacuum control.
36V, 3/4HP, 195 rpm, permanent magnet gear motor.
36V, 3-stage, by-pass type, tangential
discharge. Develops 74"H O sealed
2
lift, and 72 CFM through a 1-1/2" orifice.
Two 36V, 1 HP, 195 rpm, permanent magnet gear motor. Direct drive to self-leveling brushes.
All electronic control variable speed drive. Featuring dynamic braking for easy control up and down ramps.
Dual 20" (50.8 cm) dia., self-leveling, counter-rotating, 195 rpm.
39" (99.1 cm).
135 lbs. (61.2 Kg)
200 lbs. (90.7Kg)
Maximum will vary depending upon floor surface and pad or brush used. Current limit of brush drive motor must not be exceeded.
30 gallon (113.6L)
30 gallon (113.6L)
High-density, molded seamless linear polyethylene.
Six (6) heavy-duty deep cycle type, 6V, 250 AH, series connected.
47.5" (120.7cm) wide swinger type with welded-in vacuum tube, easily replaceable gum rubber blades (reversible for extended wear), accurate, pressure and tilt adjustments. Pivot makes squeegee self-leveling on turns.
One (1) 10" (25.4cm) dia. molded. Two (2) 5" (12.7cm) polyurethane swivels with 750 lbs. capacity. Two-speed solution pump and solenoid valve controls the flow rate to center of each brush.
Float Switch
All welded steel 7 Ga. and 11 Ga. with epoxy powder coating.
High-density molded polyethylene tanks and covers.
FORM NO. 56041444 / SELECTSCRUB KA-27, KA-33, KA-39 - 2
MACHINE SPECIFICATIONS (CONTINUED)
Brush Cover: |
All welded 11 Ga. steel with epoxy |
All welded 11 Ga. steel with epoxy |
All welded 11 Ga. steel with epoxy |
|
powder coating. |
powder coating. |
powder coating. |
Battery Charger: |
External, electronic, 20 amp, 24V. |
External, electronic, 20 amp, 36V. |
External, electronic, 20 amp, 36V. |
Dimensions |
|
|
|
Length (overall): |
63" (160.0cm) |
65.5" (166.4cm) |
68.5" (174.0cm) |
Height (overall): |
41.5" (105.4cm) |
41.5" (105.4cm) |
41.5" (105.4cm) |
Width (body): |
24" (61.0cm) |
28.5" (72.4cm) |
28.5" (72.4cm) |
Width (brush head): |
29" (73.7cm) |
35" (88.9cm) |
41" (104.1cm) |
Weight |
|
|
|
Machine & Batteries: |
950 lbs. (430.9 Kg) |
1,030 lbs. (467.2 Kg) |
1,190 lbs. (539.8 Kg) |
Shipping Weight |
|
|
|
Machine: |
618 lbs. (280.3 Kg) |
665 lbs. (301.6 Kg) |
734 lbs. (332.9 Kg) |
Battery Pack: |
350 lbs. (158.8 Kg) |
384 lbs. (174.2 Kg) |
500 lbs. (226.8 Kg) |
Charger: |
25 lbs. (11.3 Kg) |
25 lbs. (11.3 Kg) |
25 lbs. (11.3 Kg) |
ACCESSORIES
Off-Isle Wand |
|
039584 |
|
039584 |
|
039584 |
|
Pad Holders |
|
|
|
|
|
|
|
Pad Holder (Lh Thread): |
020385 |
|
020382 |
|
020383 |
|
|
Pad Holder (Rh Thread): |
020384 |
|
027132 |
|
027133 |
|
|
Pad Holder Parts |
|
|
|
|
|
|
|
Center Plate (Attached) |
039576 |
(right hand thread) |
039576 |
(right hand thread) |
039576 |
(right hand thread) |
|
|
|
039578 |
(left hand thread) |
039578 |
(left hand thread) |
039578 |
(left hand thread) |
Pad Clamp (Loose) |
039577 |
(right hand thread) |
039577 |
(right hand thread) |
039577 |
(right hand thread) |
|
|
|
039579 |
(left hand thread) |
039579 |
(left hand thread) |
039579 |
(left hand thread) |
Pads |
|
|
|
|
|
|
|
Strip Pad |
015703 |
|
015700 |
|
015697 |
|
|
Scrub Pad |
015704 |
|
015701 |
|
015698 |
|
|
Polish Pad |
015705 |
|
015702 |
|
015699 |
|
|
Brushes |
|
|
|
|
|
|
|
Bassine Scrub |
020387 |
|
020391 |
|
020395 |
|
|
Polish |
020388 |
|
020392 |
|
020396 |
|
|
Polypropylene |
020386 |
(Std) |
027134 |
(Std) |
027135 |
(Std) |
|
Steel Wire |
020389 |
|
020393 |
|
020397 |
|
|
Grit |
|
020390 |
|
020394 |
|
020398 |
|
MICROSTAT™ Filter Kit |
038303 |
|
038303 |
|
038303 |
|
|
Batteries |
|
|
|
|
|
|
|
With Acid (Wet): |
|
|
|
|
|
|
|
200 |
Amp-Hr (Set) |
026956 |
(4-Pack) |
026951 |
(6-Pack, Std) |
026951 |
(6-Pack) |
200 |
Amp-Hr (Single) |
026408 |
|
026408 |
(Std) |
026408 |
|
250 |
Amp-Hr (Set) |
026106-1 (4-Pack,Std) |
026950-1 (6-Pack) |
026950-1 (6-Pack,Std) |
|||
250 |
Amp Hr (Single) |
026200 |
(Std) |
026200 |
|
026200 |
(Std) |
330 |
Amp Hr (Set) |
027168 |
(4-Pack) |
027047 |
(6-Pack) |
027047 |
(6-Pack) |
330 |
Amp-Hr (Single) |
027048 |
|
027048 |
|
027048 |
|
Without Acid (Dry): |
|
|
|
|
|
|
|
200 |
Amp-Hr (Set) |
026565 |
(4-Pack) |
026568 |
(6-Pack) |
026568 |
(6-Pack) |
200 |
Amp-Hr(Single) |
026441 |
|
026441 |
|
026441 |
|
250 |
Amp-Hr (Set) |
026107-1 (4-Pack) |
026570-1 (6-Pack) |
026570-1 (6-Pack) |
|||
250 |
Amp Hr (Single) |
026200-1 |
026200-1 |
026200-1 |
|||
330 |
Amp Hr (Set) |
026108 |
(4-Pack) |
027111 |
(6-Pack) |
027111 |
(6-Pack) |
330 |
Amp-Hr (Single) |
027100 |
|
027100 |
|
027100 |
|
Battery Chargers: |
|
|
|
|
|
|
|
120 |
Volt - 60 Hertz |
031400 |
|
031403 |
|
031403 |
|
100 |
Volt - 50 Hertz |
031402 |
|
031405 |
|
031405 |
|
230 |
Volt - 50 Hertz |
031401 |
|
031404 |
|
031404 |
|
230 |
Volt - 60 Hertz |
031402 |
|
031405 |
|
031405 |
|
Squeegee Blades: |
|
|
|
|
|
|
|
Std. Blade Set (3 Pcs) |
039590 |
|
039566 |
|
039567 |
|
|
Front Blade |
056425 |
|
056428 |
|
056632 |
|
|
Std. Rear Blade |
056427 |
|
056429 |
|
056633 |
|
|
Backup Blade |
056426 |
|
056430 |
|
056634 |
|
|
Neoprene Rear Blade |
039589 |
|
039568 |
|
039569 |
|
For a complete list of accessories and to order, contact your local Kent equipment dealer or the dealer from which the machine was purchased.
3 - FORM NO. 56041444 / SELECTSCRUB KA-27, KA-33, KA-39
INTRODUCTION
____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
This manual will help you get the most from your Kent Automatic Scrubber. Read it thoroughly before operating the machine.
This product is intended for commercial use only.
_____________________________________________________________________________________________________________________________
PARTS AND SERVICE
Repairs, when required, should be performed by your Authorized Kent Service Center, who employs factory trained service personnel, and maintains an inventory of Kent original replacement parts and accessories.
Call the KENT DEALER named below for repair parts or service. Please specify the Model and Serial Number when discussing your machine.
(Dealer, affix service sticker here.)
____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
NAME PLATE
The Model Number and Serial Number of your machine are shown on the Nameplate on the bottom of the machine. This information is needed when ordering repair parts for the machine. Use the space below to note the Model Number and Serial Number of your machine for future reference.
MODEL NUMBER
SERIAL NUMBER
____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
UNCRATE THE MACHINE
When the machine is delivered, carefully inspect the shipping carton and the machine for damage. If damage is evident, save the shipping carton so that it can be inspected. Contact the Kent Customer Service Department immediately to file a freight damage claim.
FORM NO. 56041444 / SELECTSCRUB KA-27, KA-33, KA-39 - 4