About this Unit ..........................................................84
3English
Before Use
Before Use
Precautions
# WARNINGS
Ñ To prevent injury or fire, take
the following precautions:
• To prevent a short circuit, never put or leave
any metallic objects (such as coins or metallic
tools) inside the unit.
• Do not watch or fix your eyes on the unit’s
display when you are driving for any extended
period.
• If you experience problems during installation,
consult your JVC dealer.
Ñ Precautions on using this unit
• When you purchase optional accessories,
check with your JVC dealer to make sure that
they work with your model and in your area.
• You can select a language to display menus,
audio file tags, etc. See User Interface Setup (P. 53).
• The Radio Data System or Radio Broadcast
Data System feature won’t work in areas
where the service is not supported by any
broadcasting station.
Ñ Protecting the monitor
• To protect the monitor from damage, do not
operate the monitor using a ball point pen or
similar tool with a sharp tip.
Ñ Cleaning the unit
• If the faceplate of this unit is stained, wipe it
with a dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe it with
a cloth moistened with neutral cleaner, then
wipe it again with a clean soft dry cloth.
NOTE
• Applying spray cleaner directly to the unit
may damage its mechanical parts. Wiping the
faceplate with a hard cloth or using a volatile
liquid such as thinner or alcohol may scratch the
surface or erase the screened print.
Ñ Acquiring GPS signal
The first time you turn on this unit, you must
wait while the system acquires satellite signals
for the first time. This process could take up
to several minutes. Make sure your vehicle
is outdoors in an open area away from tall
buildings and trees for fastest acquisition.
After the system acquires satellites for the first
time, it will acquire satellites quickly each time
thereafter.
Ñ About GLONASS
This unit uses Global Navigation Satellite System
(GLONASS) in addition to GPS.
Combining GPS and GLONASS can refine
positioning accuracy than using GPS only.
Ñ Caution for Smartphone Users
Simultaneously running multiple applications
on your smartphone while screen sharing places
heavy demand on the microprocessor of the
phone, potentially affecting communication and
performance.
For best results while pairing with your JVC
receiver, please be sure to close any unused
applications.
4
How to read this manual
• The screens and panels shown in this
manual are examples used to provide a clear
explanation of operations.
For this reason, they may be different from
the actual screens or panels, or some display
patterns may be different from the actual ones.
• Display language: English is used for the
purpose of explanation. You can select a
display language from the [SETUP] menu. See
User Interface Setup (P.53).
Before Use
5English
Basic Operations
Basic Operations
Functions of the Buttons on the Front Panel
123
NOTE
• The panels shown in this manual are examples used to provide a clear explanation of operations. For this reason,
they may be different from the actual panels.
NumberNameMotion
–, +
1
(Volume)
FNC• Displays the popup menu screen.
2
Remote
3
Sensor
• Adjusts the volume.
The volume will go up to 15 when you keep pressing [+]. (P. 10)
• Pressing for 1 second starts the voice recognition function (P. 48). While Apple
CarPlay or Android Auto is connected, starts the function on the Apple CarPlay or the
Android Auto screen.
• When neither Apple CarPlay, Android Auto, nor a Bluetooth Hands-Free phone is
connected, pressing and holding displays Bluetooth pairing waiting dialog. (P. 41)
• When the power is off, turns the power on.
• Receives the remote control signal.
6
Basic Operations
Turning on the Unit
Press the [FNC] button.
1
The unit is turned on.
NOTE
• If it is your first time to turn the unit on after
installation, it will be necessary to perform Initial
setup (P. 7).
● To turn off the unit:
Press the [FNC] button.
1
Popup menu appears.
Touch [].
2
HOME screen appears.
Touch [].
3
Touch [Power Off].
4
Initial Settings
Initial setup
Perform this setup when you use this unit first
time.
Set each item as follows.
1
■ [Language]
Select the language used for the control
screen and setting items. Default is “British
English(en)”.
Displays the message screen.
For details, see 3-way speaker system setup
(P. 60).
Touch [Finish].
2
NOTE
• These settings can be made from the SETUP
menu. See Setup (P.52).
].
Security Code Setup
You can set up a security code to protect your
receiver system against theft.
When the Security Code function is activated,
the code cannot be changed and the function
cannot be deactivated. Note that the Security
Code can be set with a 4 to 8 digit number of
your choice.
Preparation
• Set [DEMO] to [OFF] in the Special screen.
(P. 56)
Press the [FNC] button.
1
Popup menu appears.
Touch [].
2
HOME screen appears.
Touch [].
3
Touch [Security].
4
Security screen appears.
Touch [Security Code Set] on the Security
5
screen.
Security Code Set screen appears.
8
Basic Operations
Enter a security code with 4 to 8 digits
6
and touch [Enter].
Enter the same code again and touch
7
[Enter].
Now, your security code is registered.
NOTE
• Touch [BS] to delete the last entry.
• If you enter a different security code, the
procedure returns to step 6 (for first code entry).
• If you have disconnected the Receiver from the
battery, enter the correct security code as that
you have entered in step 6 and touch [Enter]. You
can use your receiver.
To change the security code:
Touch [Security Code Change] on the
1
Security screen.
Security Code Set screen appears.
Calendar/clock settings
Press the [FNC] button.
1
Popup menu appears.
Touch [].
2
HOME screen appears.
Touch [].
3
Touch [User Interface].
4
Enter the current registered security code
2
and touch [Enter].
Enter a new security code with 4 to 8
3
digit number and touch [Enter].
Enter the same code again and touch
4
[Enter].
The new security code is registered.
To clear the security code:
Touch [Security Code Cancellation] on
1
the Security screen.
Security Code Set screen appears.
Enter the current registered security code
2
and touch [Enter].
The security code is cleared.
User Interface screen appears.
Touch [Time Zone].
5
Select the time zone.
6
Set each item as follows.
7
Scroll the page to show hidden items.
9English
Basic Operations
■ [Time Format]
Select the time display format.
[12-Hour] (Default)/[24-Hour]
■ [Clock]
[GPS-SYNC ](Default): Synchronizes the clock
time with the GPS.
[Manual]: Set the clock manually.
■ [Time Zone]
Select the time zone.
■ [Clock Adjust]
If you select [Manual] for Clock, adjust the
date and time manually. (P. 55)
NOTE
• Please set the date and time. If they are not set,
some functions may not work.
Adjusting the volume
You can adjust the volume (0 to 40).
Press [+] to increase, and press [–] to decrease.
Holding [+] increases the volume continuously
to level 15.
● Flick
Slide your finger quickly
to the left or right on the
screen to change the page.
You can scroll a list screen
by flicking up/down on the
screen.
● Swipe
Slide your finger up or down
on the screen to scroll the
screen.
Gesture Touch Control:
You can also control playback by moving your
finger on the touch panel as follows (for some
sources, the gesture touch control function is
not available).
• Sliding the finger upward/downward:
Equivalent to the operation of pressing [ [] (Media). Tuner Preset broadcast stations
are switched.
• Sliding the finger leftward/rightward:
Equivalent to the operation of pressing [E]
/ [F].
• Moving your finger clockwise or counterclockwise: Increases/decreases the volume.
]/
Touch screen operations
To perform operations on the screen, you need
to touch, touch and hold, flick or swipe to
select an item, display a setting menu screen
or change pages.
● Touch
Touch the screen gently to
select an item on the screen.
● Touch and hold
Touch the screen and keep
your finger in place until
the display changes or a
message is displayed.
10
On the HOME screen, you can control the
widget by sliding two fingers. (P. 17)
Basic Operations
Popup menu
Press the [FNC] button.
1
Popup menu appears.
Touch to display the popup menu.
2
1
2
The contents of the menu are as follows.
• Displays the HOME screen. (P.12)
• Switches between screens.
The screen to be switched to depends
on the [DISP Key] setting on the [User Interface] screen. (P. 53).
• Touch and hold to turns the screen off.
• Displays the Screen Adjustment screen.
(P. 52)
• Close the popup menu.
Turn off the screen
Touch and hold [DISP] on the popup
1
menu.
NOTE
• Touch the display to turn on the screen.
• To display the clock while the screen is off, it is
necessary to set “OSD Clock” to “ON”. ( P.56)
• Function key1 to 3: The current screen
1
changes to the one you have set. The
function key1 and 2 are set to [Camera]
and [Audio] function as default. For the
function setting, refer to Customize popup menu functions (P.55).
– [
]: Displays the view camera screen.
(P. 36)
– [
]: Displays the Audio screen.
(P. 60)
• Touch and hold to display the Customize
FNC Menu screen. (P. 55)
• Short-cut source icons: The source
2
changes to the one you have set with a
short-cut. For the short-cut setting, refer
to Customize Short-cut source icons on HOME screen (P.14).
11English
Basic Operations
HOME screen descriptions
Most functions can be performed from the
HOME screen.
1
11345
• Short-cut playback source icons (P. 13)
1
• Current source information.
2
• Touch to display the control screen of the
current source.
• Displays the source selection screen. (P.13)
3
• Widget (P.17)
4
– You can change the display to big or split
widget mode by sliding 2 fingers upward/
downward.
• Displays the SETUP screen. (P.56)
5
12
Source selection screen
description
You can display icons of all playback sources
and options on the source selection screen.
To change pages, flick your finger leftward/
rightward on the screen.
1
34
• Changes playback sources.
1
For playback sources, see P.13.
• Page indication
2
• Returns to the previous screen.
3
• Displays the SETUP screen. (P.52)
4
2
Display the HOME screen
Press the [FNC] button.
1
Popup menu appears.
Touch [].
2
HOME screen appears.
12
Basic Operations
Select the playback source
Press the [FNC] button.
1
Popup menu appears.
Touch [].
2
HOME screen appears.
Touch [].
3
From the screen, you can select the
following sources and functions.
• Switches to the Apple CarPlay screen
from the connected iPhone. (P. 19)
• Switches to the Android Auto screen
from the connected Android device.
(P. 21)
• Displays the Hands Free screen. (P. 46)
When neither Apple CarPlay, Android
Auto, nor a Bluetooth Hands-Free phone
is connected, displays Bluetooth pairing
waiting dialog. *1 (P. 41)
• Switches to the Radio broadcast.
(P. 32)
• Plays a Bluetooth audio player. (P. 40)
• Plays an iPod/iPhone. (P. 29)
• Plays files on a USB device. ( P.26)
*1 When connecting as Apple CarPlay or Android
Auto, it works as a phone provided in Apple
CarPlay or Android Auto. If Apple CarPlay or
Android Auto are connected during talking by
the Bluetooth device, the current call will be
continued.
2
*
This can be selected when the AV-IN is set to
[NONE] on the Camera Assignment Setting
screen.
3
*
This function is enabled on the HOME screen.
To select the playback source on the
HOME screen
The 4 items displayed on the source selection
screen with large icons are shown on the
HOME screen.
You can change the items displayed on this
area by customizing the source selection
screen. (P. 14)
• Switches to Spotify. (P. 24)
• Switches to an external component
connected to the AV-IN input terminal. *2
(P. 38)
• Displays the Wireless Mirroring screen.
(P. 23)
• Displays the Audio screen. ( P.60)
• Displays the screen you have set in the
Customize Favorite Key screen. (P.54)
• Touch and hold to display the Customize
Favorite Key screen. *
• Turns off the AV source. (P. 14)
• Turns off the unit. ( P.7)
3
13English
Basic Operations
To select the playback source on the
source control screen
Display source selection buttons by touching
[ ]/[ ] or flicking left or right on the source
control screen, then select a playback source.
To turn off the AV source
Press the [FNC] button.
1
Popup menu appears.
Touch [].
2
HOME screen appears.
Touch [].
3
Touch [AV Off].
4
Customize Short-cut source icons
on HOME screen
You can arrange the positions of the source
icons as you like.
Press the [FNC] button.
1
Popup menu appears.
Touch [].
2
HOME screen appears.
Touch [].
3
Touch and hold the icon which you want
4
to move in the customizing mode.
Drag the icon to the desired position.
5
Changes the page
14
Basic Operations
Source control screen
descriptions
There are some functions which can be
performed from most screens.
Indicators
4
5
6
8
12
Short-cut source icons
1
All sources icon
Displays the source selection screen. (P. 13)
2
Secondary screen
• [
]/[ ] : The Secondary screen changes to
another one every time you touch it. You can
also change the Secondary screen by flicking
left or right on the screen.
• Indicators: Displays the current source
condition and so on.
– [AT T]: The attenuator is active.
– [DUAL]: The dual zone function is active.
– [LOUD]: The loudness control function is active.
• Short-cut source icons: The source changes to
the one you have set with a short-cut. For the
short-cut setting, refer to Customize Short-cut source icons on HOME screen (P.14).
3
Content list
Displays the track/file/station/channel list.
4
Connected Bluetooth device information.
3
5
Artwork & information
You can select whether to display an artwork
and song information or only song information
in more detail.
Touching the artwork area switches to the VU
meter. (The USB, iPod, Bluetooth audio sources
only)
7
Change the text size of song information smaller
when the “Small Audio Text” is set to “ON” in the
User Interface screen ( P.53).
6
Function panel
Touch the left side of the screen to display the
function panel. Touch again to close the panel.
7
HOME button
Displays the HOME screen. (P. 12)
8
Operation keys
You can operate the current source with these
operation keys. The available functions are
different depending on the source type.
15English
Basic Operations
List screen
There are some common function keys in the
list screens of most sources.
(P. 28, 31, 46)
Display the list screen
For USB/iPod:
Touch [1] or the item listed on the
1
information area in the source control
screen.
The list screen appears.
For Bluetooth audio:
Touch [1].
1
The list screen appears.
You can use following operation keys from this
screen.
5
[]/[]/[]/[] Page scroll
You can change pages to display more items by
pressing [
• [
6
Return
Returns to the previous screen.
NOTE
• Depending on the current source or mode, some
function key may not appear.
]/[].
]/[] : Displays the top or bottom page.
612
345
1
Displays the list type selection window.
2
Displays a music/movie file list.
3
Text scroll
Scrolls the displayed text.
4
etc.
Keys with various functions are displayed here.
•
: Plays all tracks in the folder containing
the current track.
•
: Jumps to the letter you entered
(alphabetical search).
•
: Moves to the upper hierarchy
level.
16
Widget
Widget
Widget Basic Operation
Big widget
Split widget
Widget list
• Clock/Spectrum analyzer Widget
• Current source information Widget
• Compass Widget
• VU meter Widget
• Photo Frame Widget
● To change the widget style
Touch the widget area. You can change the
displayed information or design.
● To change the widget
Slide two fingers leftward/rightward.
When the split widget mode is selected, you
should put the fingers on each of the windows
before slide.
● To change the widget format
Slide two fingers upward/downward to switch
between the big and the split widget mode.
Photo Frame Widget
You can display a slideshow of the image
files stored in the USB memory on the HOME
screen.
Ñ Preparation
• Select “ON” for Photo Frame Widget in the
Widget SETUP screen. (P.18)
● Acceptable Picture files
Max. Picture size
JPEG (.jpg, .jpeg) *5,000 × 5,000
PNG (.png) 1,000 × 1,000
BMP (.bmp)1,000 × 1,000
• This unit can only play back files which are less
than 50 MB.
• The maximum number of files per device is
500.
• Picture files may not be played depending on
their condition.
* A progressive format is not supported.
17English
Widget
Widget Setup
Set up the widget on the HOME screen.
Press the [FNC] button.
1
Popup menu appears.
Touch [].
2
HOME screen appears.
Touch [].
3
SETUP screen appears.
Touch [User Interface].
4
User Interface screen appears.
Touch [Widget SETUP] in the User
5
Interface screen.
Set each item as follows.
6
■ [Photo Frame Widget]
Determine whether to use the photo frame
widget.
"ON" (Default)/"OFF"
■ [Photo Frame SETUP]
Make settings related to photo play display.
To Photo Frame Setup
Touch [Photo Frame SETUP] on the
1
Widget SETUP screen.
Set each item as follows.
2
■ [Sort Order]
Specify a file sorting criterion.
"By Name(Ascending)"/
Specify the slideshow interval.
"5" (Default) to "30" seconds
■ [Photo Frame is •••••]
Display help topics about the photo frame
widget.
Touch [ ].
3
18
Touch [ ].
7
APPS
APPS
Apple CarPlay Operation
Apple CarPlay is a smarter, safer way to use
your iPhone in the car. Apple CarPlay takes
the things you want to do with iPhone while
driving and displays them on the screen of
the product. You can get directions, make
calls, send and receive messages, and listen to
the music from iPhone while driving. You can
also use Siri voice control to make it easier to
operate iPhone.
For details about Apple CarPlay, visit https://
apple.com/ios/carplay/.
Compatible iPhone devices
You can use Apple CarPlay with the following
iPhone models.
• iPhone X
• iPhone 8 Plus
• iPhone 8
• iPhone 7 Plus
• iPhone 7
• iPhone SE
• iPhone 6s Plus
• iPhone 6s
• iPhone 6 Plus
• iPhone 6
• iPhone 5s
• iPhone 5c
• iPhone 5
Ñ Connecting an iPhone
Wired connection
Connect your iPhone using KS-U62 via
1
the USB (Black) terminal. (P. 77)
When an iPhone compatible with Apple
CarPlay is connected to the USB (Black)
terminal, the Bluetooth Hands-Free phone
currently connected is disconnected.
Unlock your iPhone.
2
Wireless connection
You can select the iPhone registered as the
Bluetooth device from [Apple CarPlay Device List] and use it as the Apple CarPlay device.
Preparation
• To register an iPhone by the connection via the
USB (Black) terminal
– Connect an iPhone via the USB (Black) terminal
and operate the iPhone according to the
confirmation messages displayed on the
iPhone. The iPhone is registered in [Apple CarPlay Device List]. Removing the iPhone
from the USB (Black) terminal and selecting
the registered iPhone from [Apple CarPlay Device List], the iPhone will be connected
wirelessly.
• To register an iPhone by the connection via
Bluetooth
– Touching [
Device List] screen (P. 20), displays
Bluetooth pairing waiting dialog. Referring
to Register the Bluetooth device (P.41)
and registering the iPhone, the iPhone will be
connected wirelessly.
Press the [FNC] button.
1
Popup menu appears.
Touch [].
2
HOME screen appears.
Touch [].
3
Touch [Apple CarPlay]. (P. 13)
4
NOTE
• Turn on the Bluetooth function and Wi-Fi function
of an iPhone.
• If two or more iPhones have been registered,
select the iPhone to be used as the [Apple CarPlay] source. (P. 20)
• You can also select the iPhone registered in
[Apple CarPlay Device List](P. 20) even
when the [Apple CarPlay] icon is not activated
on the source selection screen.
• It is necessary to connect the GPS antenna and
the speed pulse input in order to use a wireless
Apple CarPlay.
] on the [Apple CarPlay
19English
APPS
To switch the current screen to the Apple
CarPlay screen when connecting your
iPhone
• Touch [Apple CarPlay] icon on the source
selection screen. (P. 13)
• Touch the following connection message if the
message appears.
NOTE
• The connection message appears when;
– The iPhone you used previously is connected
again.
– The screen other than HOME and the source
selection screen is displayed.
• The connection message is displayed for about
5 seconds.
Ñ Select an Apple CarPlay device
If two or more iPhones compatible with Apple
CarPlay have been registered, select the
iPhone to be used as the Apple CarPlay source.
Press the [FNC] button.
1
Popup menu appears.
Touch [].
2
HOME screen appears.
Touch [].
3
SETUP screen appears.
Touch [AV].
4
AV screen appears.
Touch [Apple CarPlay Device List].
5
Select a device.
6
The Apple CarPlay device connected via
the USB and the registered Apple CarPlay
devices ready for wireless connection are
displayed.
• [] : Displays a Bluetooth pairing waiting
dialog. For details, see Register the Bluetooth device (P.41).
• [
] : Displays confirmation message to
disconnect the device.
• [
] : Displays Device Remove screen.
(P. 20)
To delete the registered Apple CarPlay
device
Touch [].
1
Touch the device name to check.
2
■ [þ [ALL]
Selects all Apple CarPlay devices.
■ [¨ [ALL]
Clears all check marks.
Touch [Delete].
3
Confirmation message appears.
Touch [Yes ].
4
All the selected device(s) is deleted.
NOTE
• This operation also deletes the same device(s)
from the Bluetooth device list screen. (P. 43)
20
APPS
Ñ Operation buttons and
available Apps on the home
screen of Apple CarPlay
You can use the Apps of the connected iPhone.
The items displayed and the language used
on the screen differ among the connected
devices.
To enter the Apple CarPlay mode, touch
[Apple CarPlay] icon on the source selection
screen. (P. 13)
2
1
1
[]
• Displays the home screen of Apple CarPlay.
• Touch and hold to activate Siri.
2
Application buttons
Starts the application.
3
[HOME]
Exits the Apple CarPlay screen and displays the
HOME screen.
To exit the Apple CarPlay screen
Press the [FNC] button.
1
Popup menu appears.
Touch [].
2
HOME screen appears.
3
Ñ Use Siri
You can activate Siri.
Press the [FNC] button for 1 second.
1
Press for 1 second
To deactivate
Press the [FNC] button.
1
Ñ Switch to the Apple CarPlay
screen while listening to
another source
Press the [FNC] button.
1
Popup menu appears.
Touch [DISP].
2
NOTE
• This operation is available when [DISP Key] is set
to [Mirroring] on the [User Interface] screen.
(P. 53)
• When listening to another source with the Apple
CarPlay screen displayed, playing music in the
Apple CarPlay mode will switch the current
source to the Apple CarPlay source.
Android Auto™ Operation
Android Auto enables you to use the functions
of your Android device convenient for driving.
You can easily access route guidance, make
calls, listen to music, and access convenient
functions on the Android device while driving.
For details about Android Auto, visit https://
www.android.com/auto/ and https://support.
google.com/androidauto.
Compatible Android devices
You can use Android Auto with Android
devices of Android version 5.0 (Lollipop) or
later.
NOTE
• Android Auto may not be available on all devices
and may not be available in all countries or
regions.
Talk to Siri.
2
21English
APPS
● About the placement of smartphone
Install the smartphone connected as Android
Auto device in the place where it can receive
the GPS signals.
When using Google Assistant, install
the smartphone in the place where the
smartphone easily catch a voice by the
microphone.
NOTE
• Do not put the smartphone in a spot exposed
to direct sunlight or near an air blowing out
port of an air conditioner. The placement of
the smartphone in such places can lead to
malfunction or damage of your smartphone.
• Do not leave the smartphone in the vehicle.
Ñ Connect Android device
Connect an Android device via the USB
1
terminal. (P. 78)
To use the hands-free function, connect the
Android device via Bluetooth.
When an Android device compatible
with Android Auto is connected to the
USB terminal, the device is connected via
Bluetooth automatically, and the Bluetooth
Hands-Free phone currently connected is
disconnected.
Unlock your Android device.
2
Press the [FNC] button.
3
Popup menu appears.
Touch [].
4
Touch [].
5
Touch [Android Auto]. (P. 13)
6
Ñ Operation buttons and
available Apps on the Android
Auto screen
You can perform the operations of the Apps of
the connected Android device.
The items displayed on the screen differ
among the connected Android devices.
To enter the Android Auto mode, touch the
[Android Auto] icon on the source selection
screen. (P. 13)
1
1
Application/information buttons
Starts the application or displays information.
To exit the Android Auto screen
Press the [FNC] button.
1
Popup menu appears.
Touch [].
2
HOME screen appears.
Ñ Using voice control
Press the [FNC] button for 1 second.
1
Press for 1 second
To cancel
Press the [FNC] button.
1
Ñ Switch to the Android Auto
screen while listening to
another source
Press the [FNC] button.
1
Popup menu appears.
Touch [DISP].
2
NOTE
• This operation is available when [DISP Key] is set to
[Mirroring] on the [User Interface] screen. (P.53)
• When listening to another source with the
Android Auto screen displayed, playing music in
the Android Auto mode will switch the current
source to the Android Auto source.
22
APPS
Wireless Mirroring Operation
You can display the same screen of the
Android device on the monitor of the unit
using the Wireless Mirroring function of the
Android device.
Preparation
• You can use the Wireless Mirroring function with
Android devices compatible with this function.
• This function may be called Wireless Display,
Screen Mirroring, AllShare Cast, etc., depending
on the manufacturer.
• The settings on the Android device differ
depending on the device type. For details, refer
to the instruction manual supplied with your
Android device.
• If your Android device is locked, Mirroring screen
may not appear.
• If the Android device is not ready for UIBC, you
cannot perform touch operation.
Press the [FNC] button.
1
Popup menu appears.
Touch [].
2
HOME screen appears.
Touch [].
3
Touch [Wireless Mirroring]. (P. 13)
4
The App screen is displayed.
Operate your Android device to activate
5
the Wireless Mirroring function, then
connect to this unit.
Select “KW-M****” as the network to use.
6
When the connection is established,
then the same screen displayed on the
Android device is displayed.
Ñ Change the device name
Press the [FNC] button.
1
Popup menu appears.
Touch [].
2
HOME screen appears.
Touch [].
3
SETUP screen appears.
Touch [AV].
4
AV screen appears.
Touch [Wi-Fi SETUP].
5
Touch [Device Name].
6
Change Device Name screen appears.
Touch and hold [].
7
Input the device name.
8
Touch [Enter].
9
NOTE
• Apps is discontinued when the power is turned
ON/OFF or you leave the vehicle. To restart Apps,
operate the Android device.
• When the Apps source is displayed, you cannot
register or reconnect a Bluetooth device. Switch
the Apps source to another source, and then
operate the Bluetooth device.
23English
APPS
Spotify Operation
You can listen to Spotify on this unit by
controlling the application installed in the
iPhone or Android.
To select the Spotify source, touch [Spotify]
icon on the source selection screen. (P. 13)
Preparation
• Install the latest version of the Spotify application
"Spotify" on your iPhone or Android.
iPhone: Search for "Spotify" in the Apple App
Store to find and install the most current version.
Android: Search for "Spotify" in Google play to
find and install the most current version.
• iPhones are connected via either USB or
Bluetooth.
• Android devices are connected via Bluetooth.
• To connect a smartphone via Bluetooth, register
it as the Bluetooth device and do the App (SPP)
profile setting for the connection beforehand.
See Register the Bluetooth device (P.41) and Connect the Bluetooth device (P.43).
• When an Apple CarPlay is connected, you can
use Spotify.
1
2
3
Close the drawer
1
3
Operation keys
] : Displays the Menu screen
• [
• [
] : New radio station that relates to the
artist of the currently being played song is
selected and playback starts.
• [
] , [] : Skips the current song.
• [
] , [] : Plays or pauses the content of the
current station.
] : Saves the currently being played song
• [
to My Music.
• [
] : Touch to attenuate/restore the sound.
4
Content information
• Displays the information on the current
content being played.
• Change the text size of the information smaller
when the “Small Audio Text” is set to “ON” in the
User Interface screen. ( P.53)
5
[]/[ ]/[]/[]
• [
] : Thumbs down to the current contents
and skips to the next content.
• [
5
4
] : Registers the current content as a
favorite content.
• [
] : Repeats the current song.
• [
] : Randomly plays all songs in the current
playlist.
Ñ Selecting a track
Touch [ ].
1
Spotify Station List screen appears.
Select the list type, then select a desired
2
item.
1
Artwork
• Displays/hides artwork area.
• Picture data is displayed if available from the
current content.
2
Playing time
• For confirmation of play time.
24
■ To select the category and station
Touch the category and station name in the
list.
To p]
■ [
Returns to the top of the list.
■ [ Up]
Returns to the previous list.
About Spotify®
Note
• Ensure you are logged in to your smartphone
application. If you do not have an Spotify account,
you can create one for free from your smartphone
or at www.spotify.com.
• Because Spotify is a third-party service, the
specifications are subject to change without
prior notice. Accordingly, compatibility may
be impaired or some or all of the services may
become unavailable.
• Some functions of Spotify cannot be operated
from this unit.
• For issues on using the application, contact
Spotify at www.spotify.com.
• Establish an Internet connection.
APPS
25English
USB
USB
Connecting a USB device
Connect the USB device with the USB
1
cable. (P. 77)
Press the [FNC] button.
2
Popup menu appears.
Touch [].
3
HOME screen appears.
Touch [].
4
Touch [USB]. (P.13)
5
Ñ Disconnect the USB device
Press the [FNC] button.
1
Popup menu appears.
Touch [].
2
HOME screen appears.
Touch a source other than [USB].
3
Detach the USB device.
4
NOTE
• Install the USB device in the place where it will
not affect safe driving.
• You cannot connect a USB device via a USB hub
and Multi Card Reader.
• Take backups of the audio files used with this
unit. The files can be erased depending on the
operating conditions of the USB device.
We shall have no compensation for any damage
arising from any erased data.
USB Basic Operation
Most functions can be controlled from the
source control screen and playback screen.
Control screen
1
6
7
3
4
Open the drawer
7
2
5
5
Ñ Usable USB device
You can use a mass-storage-class USB device
with this unit.
The word “USB device” appearing in this manual
indicates a flash memory device.
● About the file system
The file system should be the one of the
following.
• FAT16• FAT32• exFAT• NTFS
26
Close the drawer
6
5
7
8
USB
1
[CODEC]/[]/[]
• When a high-resolution source is played, its
format information is displayed.
• [
] : Repeats the current track/folder. Each
time you touch the key, repeat modes are
switched in the following sequence:
File repeat ( ), Folder repeat ( ), Repeat
all ( )
• [
] : Randomly plays all tracks in the current
folder. Each time you touch the key, random
modes are switched in the following sequence:
File random ( ), Random off ( )
2
Track information
• Displays the information on the current file.
Only a file name and a folder name are
displayed if there is no tag information.
• Touch to display the Category List screen. See
Category search (P.28).
• Change the text size of the information smaller
when the “Small Audio Text” is set to “ON” in the
User Interface screen. ( P.53)
3
Play mode indicator/Playing time
• D, B, etc.: Current play mode indicator
Meanings of individual icons are as follows:
D (play), B (fast forward), A (fast
backward), H (pause).
• For confirmation of current playing position.
You can drag the circle left or right to change
the playing position. (Video file only)
4
Operation keys
• [1] : Searches track/file. For details on search
operation, see Search Operation (P.28).
• E][F] : Searches the previous/next track/
file.
Touch and hold to fast forward or fast
backward.
• [DH] : Plays or pauses.
• [
] : Touch to attenuate/restore the sound.
5
Content list
• Touch the right side of the screen to display
the Content list. Touch again to close the list.
• Displays the playing list. When you touch a
track/file name on the list, playback will start.
6
Artwork/VU meter
• Displays/hides artwork area.
• The jacket of the currently playing file is
displayed.
• When touched, switches the artwork to the
VU meter.
7
Function panel
Touch the left side of the screen to display the
function panel. Touch again to close the panel.
• [
][] : Searches for the previous/next
folder.
• [USB DEVICE CHANGE]
Switches to another USB device when two USB
devices are connected.
8
Indicator Items
• [VIDEO]: Identifies the video file.
• [MUSIC]: Identifies the music file.
Video screen
10
9
File search area (Video file only)
Touch to search for the next/previous file.
10
Key display area (Video file only)
Touch to display the control screen.
99
27English
USB
Search Operation
You can search music or video files by the
following operations.
Touch [1].
1
Touch [S].
2
Select a list type.
3
NOTE
• For operations on the list screen, see List screen
(P. 16).
Ñ Category search
You can search for a file by selecting a
category.
Touch [Category List].
1
Select whether you search audio files
2
or video files
Touch the desired category.
3
.
Ñ Link search
You can search for a file of the same artist/
album/genre as that in the current track.
Touch [Link Search].
1
Touch the desired tag type. You can select
2
from artists, albums and genres.
The list corresponding to your selection
appears.
Touch the desired item in the content list.
3
Ñ Folder search
You can search for a file according to hierarchy.
Touch [Folder List].
1
Touch the desired folder.
2
The list corresponding to your selection
appears.
Touch to select the desired item in the
4
list. Repeat this step until you find the
desired file.
28
When you touch a folder its contents are
displayed.
Touch to select your desired item in the
3
list. Repeat this step until you find the
desired file.
iPod/iPhone
iPod/iPhone
Preparation
Ñ Connectable iPod/iPhone
The following models can be connected to
this unit.
Made for
• iPhone X
• iPhone 8 Plus
• iPhone 8
• iPhone 7 Plus
• iPhone 7
• iPhone SE
• iPhone 6s Plus
• iPhone 6s
• iPhone 6 Plus
• iPhone 6
• iPhone 5s
• iPhone 5c
• iPhone 5
• iPod touch (6th generation)
NOTE
• Latest compatible list of iPod/iPhone. For details,
see www.jvc.net/cs/car/ipod/.
• By connecting your iPod/iPhone to this unit
with the iPod connection cable KS-U62 (optional
accessory), you can supply power to your iPod/
iPhone as well as charge it while playing music.
Note that the power of this unit must be held on.
• If you restart playback after connecting the iPod,
the music that has been played by the iPod is
played first.
Ñ Connect iPod/iPhone
Wired connection
Preparation
• Connect an iPod/iPhone with the KS-U62
(optional accessory) while Apple CarPlay is not
connected.
• With an Apple CarPlay-capable iPhone, turn
off Apple CarPlay by operating the iPhone at
functional setup before connecting iPhone.
For details of the setup method, contact the
manufacturer of the terminal.
• Plug the iPod/iPhone into the gray USB terminal
with the KS-U62 (optional accessory).
• Only one iPod/iPhone can be connected.
Connect the iPod/iPhone using the KS-
1
U62. (P. 77)
Press the [FNC] button.
2
Popup menu appears.
Touch [].
3
HOME screen appears.
Touch [].
4
Touch [iPod]. (P. 13)
5
● To disconnect the iPod/iPhone connected
with the cable:
Detach the iPod/iPhone.
1
Bluetooth connection
Pair the iPhone through Bluetooth.
Preparation
• To connect an iPhone via Bluetooth, register it
as a Bluetooth device and do the profile setting
for the connection beforehand. See Register the
Bluetooth device (P.41) and Connect the
Bluetooth device (P.43).
• Connect an iPhone via Bluetooth while Apple
CarPlay and an iPod/iPhone are not connected
via USB.
• With an Apple CarPlay-capable iPhone, turn
off Apple CarPlay by operating the iPhone at
functional setup before connecting iPhone.
For details of the setup method, contact the
manufacturer of the terminal.
29English
iPod/iPhone
iPod/iPhone Basic Operation
Control screen
1
2
3
4
Open the drawer
2
Close the drawer
2
1
Track information
• Displays the information on the current file.
• Touch to display the Category List screen. See
Category search (P.31).
• Change the text size of the information smaller
when the “Small Audio Text” is set to “ON” in the
User Interface screen. ( P.53)
2
Artwork/VU meter
• Displays/hides artwork area.
• The jacket of the currently being played file is
displayed.
• When touched, switches the artwork to the
VU meter.
3
Play mode indicator/Playing time
• D, B, etc.: Current play mode indicator
Meanings of individual icons are as follows:
D (play), B (fast forward), A (fast
backward), H (pause).
5
6
5
5
7
4
Operation keys
• 1] : Searches for a track/file. For details on
search operation, see Search Operation (P. 31).
• E][F] : Searches for the previous/next
track/file.
Touch and hold to fast forward or fast
backward.
• [DH] : Plays or pauses.
• [
] : Touch to attenuate/restore the sound.
5
Content list
• Touch the right side of the screen to display
the Content list. Touch again to close the list.
• Displays the playing list. When you touch a
track/file name on the list, playback will start.
6
[]/[]
• [
] : Repeats the current track/album. Each
time you touch the key, repeat modes are
switched in the following sequence:
Song repeat ( ), All songs repeat ( ),
Repeat off ( )
• [
] : Randomly plays all tracks in the current
album. Each time you touch the key, random
modes are switched in the following sequence:
Song random ( ), Random off ( )
7
Indicator Items
• [MUSIC]: Identifies the music file.
30
iPod/iPhone
Search Operation
You can search music files by the following
operations.
Touch [1].
1
Touch [S].
2
Select a list type.
3
NOTE
• For operations on the list screen, see List screen
(P. 16).
Ñ Category search
You can search for a file by selecting a
category.
Touch [Category List].
1
Touch the desired category.
2
Ñ Link search
You can search for a file of the same artist/
album/genre/composer as that in the current
track.
Touch [Link Search].
1
Touch the desired tag type. You can
2
select from artists, albums, genres and
composers.
The list corresponding to your selection
appears.
Touch the desired item in the content list.
3
The list corresponding to your selection
appears.
Touch to select the desired item in the
3
list. Repeat this step until you find the
desired file.
31English
Tuner
Tuner
Tuner Basic Operation
Most functions can be controlled from the
source control screen.
To enter Tuner source, touch [Tuner] icon in the
source selection screen. (P. 13)
2
3
4
5
1
Information display
Displays the information of the current station:
Frequency, PS name
P#: Preset number
2
Seek mode
Switches the seek mode in the following
sequence; [AUTO1], [AUTO2], [MANUAL].
• [AUTO1]: Tunes in a station with good
reception automatically.
• [AUTO2]: Tunes in stations in memory one
after another.
• [MANUAL]: Switches to the next frequency
manually.
3
Band button
Switches the band (FM1/FM2/FM3, AM).
4
Preset key
Recalls the memorized station.
When touched for 2 seconds, stores the current
receiving station in memory.
1
8
7
6
9
5
Operation keys
• [E][F] : Tunes in a station. The method of
frequency switching can be changed (see
in table).
• [SSM] (FM only): Presets stations automatically.
For details, see Auto memory (P.33).
• [
] : Displays the Tuner SETUP screen. For
details, see Tuner Setup (P.34).
• [
] : Touch to attenuates/restores the sound.
6
[PTY] (FM only)
Searches a program by setting program type. For
details, see Search by program type (P.33).
7
[MONO] (FM only)
Select the Monaural reception.
8
[TI] (FM only)
Sets the traffic information mode on. For details,
see Traffic Information (P.34).
9
Indicator Items
• [ST]: A stereo broadcast is being received.
• [MONO]: The forced monaural function is on.
• [AF]: The AF search function is on.
• [EON]: The Radio Data System station is
sending EON.
• [LOS]: The Local Seek function is on.
• [NEWS]: News bulletin interruption is in
progress.
• [RDS]: Indicates the state of the Radio Data
System station when the AF function is on.
White: Radio Data System is being received.
Orange: Radio Data System is not being
received.
• [TI]: Indicates the reception state of traffic
information.
White: TP is being received.
Orange: TP is not being received.
2
32
Tuner
Memory Operation
Ñ Auto memory (FM only)
You can store stations with good reception in
memory automatically.
Touch [FM].
1
Touch [SSM].
2
Touch [Yes ].
3
Selecting Operation
Ñ Preset select
You can list and select memorized station.
This function can be used from the remote
control. (P. 71)
Select a station from the list.
1
Ñ Search by program type
(FM only)
You can tune to a station with a specific
program type when listening to FM.
Touch [PTY].
1
Auto memory starts.
Ñ Manual memory
You can store the current receiving station in
memory.
Touch desired band key.
1
Select a station you wish to store in
2
memory.
Touch [#] (#:1-6) in which you want to
3
store the station for 2 seconds until a
beep sounds.
PTY Search screen appears.
Select a program type from the list.
2
Touch [Search].
3
You can search a station of the selected
program type.
33English
Tuner
Traffic Information (FM only)
You can listen and watch the traffic
information automatically when a traffic
bulletin starts. However, this feature requires
a Radio Data System that includes the TI
information.
Touch [TI].
1
Traffic information mode is set.
Ñ When the traffic bulletin starts
The Traffic Information screen appears
automatically.
NOTE
• It is necessary to have Traffic Information function
set to on in order to have the Traffic Information
screen appear automatically.
• The volume setting during reception of traffic
information is automatically stored. The next time
the traffic information is received, this unit recalls
the volume setting automatically.
• To cancel Traffic Information: Touch [Cancel].
Tuner Setup
You can set tuner related parameters.
Touch [].
1
Tuner SETUP screen appears.
Set each item as follows.
2
■ [NEWS] (FM only)
Sets a news bulletin interrupt time. Default
is “OFF”.
■ [AF] (FM only)
When station reception is poor, automatically
switches to the station that is broadcasting
the same program over the same Radio Data
System network. Default is “OFF”.
■ [Regional] (FM only)
Sets whether to switch to the station only
in the specific region using the “AF” control.
Default is “OFF”.
■ [LO.S] (FM only)
Turns the Local Seek function on or off.
■ [Auto TP Seek] (FM only)
When traffic information station reception is
poor, automatically searches for a station that
can be received better. Default is “ON”.
■ [Language Select] (FM only)
Selects a display language for the PTY
function.
■ [Aerial Control]
Allows you to turn off the Radio Data System
function to prevent the motor-driven
antenna from extending. Default is “ON”.
34
■ [Area Setting] (KW-M950BW)
The tuner channel interval changes
depending on the area you use this unit.
For Oceania sales area
[Australia] (Default): Select this when using
in Australia countries. FM/AM intervals are
set to 50 kHz/9 kHz.
[US]: Select this when using in North/
Central/South America. FM/AM intervals
are set to 200 kHz/10 kHz.
[Europe]: Select this when using in any other
areas. FM/AM intervals are set to 50 kHz/9
kHz.
Outside Oceania area
[US]: Select this when using in North/
Central/South America. FM/AM intervals
are set to 200 kHz/10 kHz.
[Others] (Default): FM/AM intervals are set to
50 kHz/9 kHz.
Tuner
35English
Other External Components
Other External Components
View Camera
NOTE
• To connect a camera, see P.76.
• To use a rear view camera, a REVERSE lead
connection is required. (P. 75)
• If [Rear Camera Interruption] is active the
camera screen is displayed when you shift the
gear to the reverse (R) position.
Ñ Display the camera screen
You can display the camera screen manually
if “Camera” is registered to a popup menu
function key. (P. 55)
Press the [FNC] button.
1
Popup menu appears.
Touch [Camera].
2
View camera screen appears.
Adjust each item as follows.
3
To erase the caution message, touch the
screen.
To switch the view camera
Touch [1].
1
Camera switching keys appear left/right
side.
Select a view camera you want to switch.
2
NOTE
• To switch to the picture other than selectable
view camera from the camera switching keys,
change the key function of except “Rear” in
[Camera Assignment Settings]. (P. 37)
Ñ Camera Setup
Press the [FNC] button.
1
Popup menu appears.
Touch [].
2
HOME screen appears.
1
2
1
Switching the View Camera*
Touch to display the camera switching keys.
It is necessary to set “Camera Assignment
Settings” beforehand. See To switch the view camera (P.36).
2
Camera off
Touch to exit the camera screen.
1
*
When two or more cameras of rear, front,
left, and right are connected with this unit.
36
Touch [].
3
SETUP screen appears.
Touch [Camera].
4
1
Camera screen appears.
Set each item as follows.
5
■ [Camera Assignment Settings]
Set up the camera assignment. See To set up
the camera assignment settings (P.37).
Other External Components
■ [Rear Camera Interruption]
[ON]: Displays the picture from the rear view
camera when you shift the gear to the
reverse (R) position.
[OFF ](Default): Select this when no camera is
connected.
■ [Parking Guidelines]
You can display parking guidelines to enable
easier parking when you shift the gear to the
reverse (R) position.
Default is “ON”.
■ [Guidelines SETUP]
If you select [ON] for [Parking Guidelines],
you can adjust the parking guidelines. See To adjust the parking guidelines (P.38).
■ [[Front Camera Interruption]*
[10 sec]/[15 sec] (Default)/[20 sec]: The front
camera screen is displayed when return
the gear from the reverse (R) position.
[OFF]: Cancel.
1
*
Only when FRONT VIEW CAMERA is set to
“Front” on the Camera Assignment Settings
screen.
1
Ñ To set up the camera
assignment settings
Touch [Camera Assignment Settings] on
1
the Camera screen. (P. 36)
Set each item as follows.
2
■ [FRONT VIEW CAMERA]
Set the camera assignment from view
camera connected to Front view camera
input terminal.
■ [AV-IN]
Set the camera assignment from view
camera connected to AV-IN input terminal.
Select the view camera to set up.
2
2
1
[Picture from view camera]
Displays the picture from view camera
connected to Front view camera input
terminal. (P. 78)
2
[Front]
3
[Right]
4
[Left]
5
[None]
Touch [Enter].
3
For AV-IN input terminal:
Touch [AV-IN].
1
Displays the picture from view camera
connected to AV-IN input terminal.
Select the view camera to set up.
2
2
31
45
31
For Front view camera input terminal:
Touch [FRONT VIEW CAMER A].
1
Displays the picture from view camera
connected to Front view camera input
terminal.
45
1
[Picture from view camera]
Displays the picture from view camera
connected to AV-IN input terminal. (P.78)
2
[Front]
3
[Right]
4
[Left]
37English
Other External Components
5
[None]
Touch [Enter].
3
Ñ To adjust the parking
guidelines
NOTE
• Install the rear view camera in the appropriate
position according to the instruction manual
supplied with the rear view camera.
• When adjusting the parking guidelines, make
sure to apply the parking brake to prevent the car
from moving.
Touch [Parking Guidelines] in the Camera
1
screen and set to ON. (P. 36)
Touch [Guidelines SETUP] on the Camera
2
screen.
Adjust the parking guidelines by
3
selecting the
Adjusting the position of the selected
4
mark.
mark.
NOTE
• Touch [Initialise] and then touch [Yes] to set all
marks to their initial default position.
the
External audio/video players
(AV-IN)
Connect an external component to the
1
AV-IN input terminal. (P.76)
Select [AV-IN] as the source. (P.13)
2
Turn on the connected component and
3
start playing the source.
NOTE
• To select the AV-IN source, it is necessary to
set “AV-IN” to “None” in [Camera Assignment Settings]. (P. 37)
Using the external navigation
unit (outside oceania area)
You can connect a navigation unit
(commercially available) to the navigation
input terminal so that you can view the
navigation screen. (P. 76)
The navigation guidance comes out of the
front speakers even when you are listening to
an audio source.
Ñ Display the navigation screen
A
C
B
Make sure that lines A and B are
horizontally parallel, and that lines C and
D are of the same length.
38
Press the [FNC] button.
1
Popup menu appears.
Touch [DISP].
D
2
The navigation screen appears.
NOTE
• Touch on the popup manu screen to
navigation screen.
This operation is available when [DISP Key] is set
to [NAV ] in the [User Interface] screen. ( P.53)
Other External Components
Ñ Navigation Setup
Press the [FNC] button.
1
Popup menu appears.
Touch [].
2
HOME screen appears.
Touch [].
3
SETUP screen appears.
Touch [Navigation].
4
Navigation screen appears.
Set each item as follows.
5
TV tuner
You can connect the TV tuner (commercially
available) with this unit and watch TV.
Preparation
• When you use TV control function, connect the
TV tuner (commercially available) and set 3rd
Party TV Tuner Control in AV Setup (P.58) to
ON.
• The TV tuner can be controlled with its supplied
remote control through the remote sensor on the
front panel of this unit.
Press the [FNC] button.
1
Popup menu appears.
Touch [].
2
HOME screen appears.
Touch [].
3
Select [TV] as the source. (P. 13)
4
Touch Key display area.
5
■ [NAV Voice Volume]
Adjusts the volume for voice guidance of the
navigation system. Default is “24”.
■ Hides the indicators and buttons.
Touch [Hide].
■ Change the channel.
Touch [CHR], [CHS].
39English
Bluetooth Control
Bluetooth Control
Using the Bluetooth function allows you to use
various functions such as listening to the audio
file and making/receiving a call.
Information for using
Bluetooth® devices
Bluetooth is a short-range wireless radio
communication technology for mobile devices
such as cell-phones, portable PCs, and other
devices.
Bluetooth devices can be connected without
cables and communication with each other.
NOTE
• While driving, do not perform complicated
operations such as dialing numbers, using the
phone book, etc. When you perform these
operations, stop your car in a safe place.
• Some Bluetooth devices may not be connected
to this unit depending on the Bluetooth version
of the device.
• This unit may not work for some Bluetooth
devices.
• Connecting conditions may vary depending on
your environment.
• Some Bluetooth devices are disconnected when
this unit is turned off.
• The Bluetooth devices cannot be used while
using Apple CarPlay.
• The Bluetooth currently connected with
other device is disconnected when an iPhone
compatible with Apple CarPlay is connected.
Ñ About the cell-phone and
Bluetooth audio player
This unit conforms to the following Bluetooth
specifications:
A2DP (Advanced Audio Distribution Profile)
AVRCP (V1.6) (Audio/Video Remote Control
Profile)
Sound codec
SBC, AAC
NOTE
• The units supporting the Bluetooth function have
been certified for conformity with the Bluetooth
Standard according to the procedure prescribed
by Bluetooth SIG.
• However, it may be impossible for such units to
communicate with your cell-phone depending
on its type.
40
Register the Bluetooth device
It is necessary to register the Bluetooth audio
player or cell-phone in this unit before using
the Bluetooth function.
You can register up to 10 Bluetooth devices.
NOTE
• Up to 10 Bluetooth devices can be registered. If
an attempt is made to register the 11th Bluetooth
device, the Bluetooth device connected on the
earliest date will be deleted to register the 11th
one.
• This unit is compatible with the Apple Easy
Pairing function. When an iPod touch or iPhone is
connected to this unit, an authentication dialog
appears. Performing operation for authentication
on this unit or iOS smartphone registers the
smartphone as a Bluetooth device.
Press the [FNC] button.
1
Popup menu appears.
Touch [].
2
HOME screen appears.
Touch [] .
3
Bluetooth Control
Touch [Select Device] on the Bluetooth
5
Setup screen.
Touch [] on the Select Device screen.
6
Bluetooth pairing waiting dialog
appears.
NOTE
• You can also register an iPhone on the Apple
CarPlay Device List screen. (P. 20)
• When neither Apple CarPlay, Android Auto, nor
a Bluetooth Hands-Free phone is connected,
pressing and holding the [FNC] button displays
Bluetooth pairing waiting dialog.
SETUP screen appears.
Touch [Bluetooth].
4
Bluetooth SETUP screen appears.
Search for the unit (“KW-M****”) from
7
your smartphone/cell-phone.
Complete steps 7 to 10 within 30 seconds.
Operate your smartphone/cell-phone
8
according to the displayed messages.
● Confirm the request both on the
smartphone/cell-phone.
41English
Bluetooth Control
● Input the PIN Code in your
smartphone/cell-phone.
PIN Code is set to “0000” as the default.
Select the function you want to use.
9
■ HFP [Hands Free1]/[Hands Free2]/[No
Connection.]
Select the hands-free number to connect.
■ A2DP/SPP [Audio/App]
Select if you want to use the audio player
app in your smartphone over A2DP, and the
other apps in your smartphone over SPP.
■ PBAP [Phonebook DL]
Select if you want to transfer your
phonebook data.
Touch [Ye s].
10
When data transmission and connection
have completed, the Bluetooth connection
icon appears on the screen.
Bluetooth Setup
NOTE
• The Bluetooth Setup is disabled while using
Apple CarPlay.
Press the [FNC] button.
1
Popup menu appears.
Touch [].
2
HOME screen appears.
Touch [].
3
SETUP screen appears.
Touch [Bluetooth].
4
NOTE
• When registering the iPhone that is available for
Apple CarPlay wirelessly, a confirmation message
appears.
– [Ye s ]: Displays the Apple CarPlay screen for
wireless connection.
– [No]: Apple CarPlay is not connected. When
using Apple CarPlay, see Select an Apple CarPlay device (P.20).
42
Bluetooth SETUP screen appears.
See the following section for each
setting.
• Connect the Bluetooth device (P. 43)
• Change the device name (P. 44)
• Change the PIN Code (P. 44)
Bluetooth Control
Ñ Connect the Bluetooth device
Touch [Select Device] on the Bluetooth
1
Setup screen.
Touch the name of the device you want
2
to connect.
Profile select screen appears.
NOTE
• If the icon is lighted, it means that the unit will
use that device.
• You cannot select an Android device connected
as an Android Auto device.
Set each profile as follows.
3
To delete the registered Bluetooth
device
Touch [] on the Select Device
1
screen.
Touch the device name to check.
2
■ [þ All]
Selects all Bluetooth devices.
■ [¨ All]
Clears all check marks.
■ [TEL (HFP) 1], [TEL (HFP) 2]
Select when the device is connected with
the unit as hands-free phone 1 or 2.
■ [Audio (A2DP)/App (SPP)]
Select to interwork with an application
installed in a smartphone or to use as an
audio player.
Touch [Close].
4
NOTE
• You cannot select an Android device connected
as an Android Auto device.
Touch [Delete].
3
Confirmation message appears.
Touch [Yes ].
4
All the selected device(s) is deleted.
NOTE
• If the device compatible with wireless Apple
CarPlay is deleted, the same device is deleted
from the Apple CarPlay device list screen.
43English
Bluetooth Control
Ñ Change the device name
Touch [Device Name] on the Bluetooth
1
SETUP screen.
Change Device Name screen appears.
Touch and hold [].
2
Input the device name.
3
Touch [Enter].
4
Ñ Change the PIN Code
Touch [PIN Code] on the Bluetooth SETUP
1
screen.
Change PIN Code screen appears.
Touch and hold [].
2
Input the PIN Code.
3
Touch [SET].
4
Playing the Bluetooth Audio
Device
Most functions can be controlled from the
source control screen.
To select Bluetooth source, touch [BT Audio]
icon on the source selection screen. (P. 13)
NOTE
• The Bluetooth audio source is disabled while
using Apple CarPlay.
• The Bluetooth audio source is disabled when the
device set as “Audio/App” is using Android Auto.
Ñ Bluetooth basic operation
Control screen
5
4
1
2
3
1
Artwork/VU meter
• Displays/hides artwork area.
• When touched, switches the artwork to the
VU meter.
2
Play mode indicator/Playing time
D, H : Current play mode indicator
Meanings of individual icons are as follows:
D (play), B (fast forward), A (fast backward),
H (pause), I (stop).
3
Operation keys *
• [1]: Searches for a file. See File search
(P. 46).
• [E][F]: Searches for the previous/next
content.
Touch and hold to fast forward or fast
backward.
• [D]: Plays.
• [H]: Pauses.
• [
]: Displays the Bluetooth SETUP screen.
• [
] : Touch to attenuate/restore the sound.
6
44
4
JVC Streaming DJ
Bluetooth audio devices can be switched easily
to play music. See JVC Streaming DJ (P.45).
5
[]/[] *
• [
] : Repeats the current track/folder. Each
time you touch the key, repeat modes are
switched in the following sequence:
File repeat ( ), Folder repeat ( ), All
songs repeat ( ), Repeat off ( )
• [
] : Randomly plays all tracks in the current
folder. Each time you touch the key, random
modes are switched in the following sequence:
Folder random ( ), All random ( ),
Random off (
6
Information display *
• Displays the name of track information.
• Connected device name.
• Change the text size of the information smaller
when the “Small Audio Text” is set to “ON” in the
User Interface screen. ( P.53)
* These items appear only when the audio player
which supports AVRCP profile is connected.
NOTE
• The operation buttons, indications and
information displayed on the screen differ
depending on the connected device.
• If the operation keys do not appear, operate from
the player.
• Depending on your cell-phone or audio player,
sound may be heard and controlled but text
information may not appear.
• If the volume is too low, raise it on your cell-
phone or audio player.
)
Ñ JVC Streaming DJ
Up to 5 Bluetooth audio device can be
connected and switched easily to play music.
Bluetooth Control
• : Device used normally.
•
: Device used for JVC Streaming DJ.
Touch [ ] (white) on the left of the name
3
of the device to be played.
[
] (white) changes to [ ] (Blue) and starts
playback.
• (Gray) : Not connected.
•
(White) : Connected.
•
(Blue) : During playback.
Touch [ ].
4
NOTE
• If a connected Bluetooth audio device is operated
to play music, connections are switched.
• When a Bluetooth source is switched to another
one, its settings are deleted and the connection
is restored to the connection before source
switching.
• You cannot select an Android device connected
as an Android Auto device.
• Touching [
connected device () disconnects
this device.
] displays the Bluetooth
] on the left of the
45English
Bluetooth Control
Ñ File search
Touch [1].
1
Touch the desired file or folder.
2
When you touch a folder its contents are
displayed.
Touch the desired item in the content list.
3
Playback starts.
NOTE
• For operations in the list screen, see List screen
(P. 16).
Using the Hands-Free Unit
You can use the telephone function by
connecting the Bluetooth telephone to this
unit.
NOTE
• While Apple CarPlay or Android Auto is
connected, the Bluetooth Hands-Free function
and two Bluetooth devices connections cannot
be used. Only the Apple CarPlay or Android Auto
Hands-Free function can be used.
Ñ Make a call
Press the [FNC] button.
1
Popup menu appears.
Touch [].
2
HOME screen appears.
Touch [].
3
Touch [Phone]. (P.13)
4
Hands Free screen appears.
NOTE
• If your cell-phone supports PBAP, you can display
the phone book and call lists onto the touch
panel screen when the cell-phone is connected.
– Phone book: up to 1000 entries
– Up to 50 entries including dialed calls, received
calls, and missed calls
46
Select a dialing method.
5
• []: Call using call records
• [
]: Call using the phonebook
• [
]: Call using the preset number
• [
]: Call by entering a phone number
Bluetooth Control
● Select the cell-phone to use
When you connect two cell-phones
1) Touch [
you want to use.
● Bluetooth SETUP
1) Touch [
Bluetooth SETUP screen appears.
● Voice Recognition
1) Touch [
NOTE
• Status icons such as battery and antenna icons
• Setting the cell-phone in the private mode can
].
]. (P. 48)
may differ from those displayed on the cellphone.
disable the hands-free function.
] to select the phone
Call using call records
Touch [].
1
Select the phone number from the list.
2
Call using the phonebook
Touch [].
1
Touch [].
2
Select the initial.
3
• Characters with no corresponding name
will not appear.
• A first character with an accent character
such as “ü” can be searched for with a
non-accent character “u” . A character
with an accent character in a sentence
cannot be searched for.
Select the person you want to call from
4
the list.
Select the phone number from the list.
5
NOTE
• You can sort the phone numbers in the list by last
name or first name. For details, see Hands-Free Setup (P.51).
47English
Bluetooth Control
Call using the preset number
Touch [].
1
Touch the name or phone number.
2
Call by entering a phone number
Touch [].
1
Enter a phone number with number keys.
2
Ñ Voice Recognition
You can access the voice recognition function
of the cell-phone connected to this unit.
You can search the cell-phone phonebook
by voice. (The functionality depends on the
cell-phone.)
Press the [FNC] button for 1 second.
1
Press for 1 second
Voice Recognition screen appears.
Start speaking.
2
NOTE
• You can use the voice recognition function by
touching [] on the Hands Free screen.
48
Touch [].
3
Bluetooth Control
Ñ Receive a call
Touch [ ] to answer a phone call or
1
[
] to reject an incoming call.
NOTE
• While monitoring the picture from the view
camera, this screen does not appear even if a call
comes in.
To end call
While talking, touch [].
1
Ñ Operations during a call
● Adjust the receiver volume
Press the [–] or [+] button.
● Mute your voice
Touch [
Touch [DTMF] to display the tone input screen.
You can send tones by touching desired keys
on the screen.
Touching [
speaking voice output destinations between
the cell-phone and the speaker.
When you receive a new call while talking on
the phone, you can answer the newly received
call by touching [
hold.
Each time you touch [
to the other one.
When you touch [
to be switched to the call waiting on hold.
Touching [×] to close the Hands-Free popup
screen. To display it again, touch [
pressing the [FNC] button.
] to mute or not to mute your voice.
● Output the dial tone
● Switching between speaking voice
output destinations
]/[] each time switches
● Call-waiting
]. The current call is put on
], the caller will change
], the current call will end
● To close the Hands-Free popup screen
] after
● Adjust the volume of your voice
1) Touch [Speech Quality].
2) Touch [T] or [U] for [Microphone Level].
49English
Bluetooth Control
Ñ Phone number preset
You can register frequently used phone
numbers in this unit.
Touch [].
1
Touch [Edit].
2
Select where to preset.
3
■ [Delete all]
To delete all preset numbers, touch [Delete
all] and then touch [OK] on the confirmation
screen.
Select how to preset.
4
■ [Delete]
To delete a preset number, touch [Delete]
and then touch [OK] on the confirmation
screen.
Ñ Phonebook transfer
You can transfer phonebook data from your
Bluetooth smartphone using PBAP.
Touch [].
1
Touch [].
2
Phonebook data transfer starts.
NOTE
• If the Phonebook contains more than 1000
entries, Phonebook data cannot be transferred.
• If no Phonebook has been downloaded, touching
[Download Phonebook Now] will start
downloading the Phonebook.
Phonebook deletion
Touch [].
1
Touch the name to check.
2
■ [Add number from phonebook]
Select the number to preset from the
phonebook. See Call using the phonebook (P. 47).
■ [Add number direct]
Enter the telephone number directly and
touch [SET]. See Call by entering a phone number (P.48).
50
■ [þ All]
Checks all boxes.
■ [¨ All]
Clears all check marks.
Touch [Delete].
3
Confirmation message appears.
Touch [OK].
4
Bluetooth Control
Hands-Free Setup
You can make various settings for the HandsFree function.
Press the [FNC] button.
1
Popup menu appears.
Touch [].
2
HOME screen appears.
Touch [].
3
SETUP screen appears.
Touch [Bluetooth].
4
■ [Bluetooth HF/Audio]
Select the speakers to output the sound from
the cell-phone (such as phone call voice and
ringing tone) and Bluetooth audio player.
[Front]: Outputs sound from the front
speakers.
[All ](Default): Outputs sound from all
speakers.
■ [Auto Response]*
Set the automatic response time to pick-up
an incoming call.
[OFF ](Default): Turns off the Automatic
response function.
[1]/[5]/[10]/[15]/[20]/[25]/[30]: Sets the ringing
time (second).
■ [Auto Pairing]
When set to “ON”, the Apple Auto Pairing
function is turned on to automatically
register the iPod touch or iPhone connected
to this unit.
[ON ](Default): Turns on the Apple Auto
Pairing function.
[OFF]: Turns off the Apple Auto Pairing
function.
■ [Sort Order]
Set how to sort the data in the cell-phone
phonebook.
[First]: Sorts data by the first name.
[Last ](Default): Sorts data by the last name.
Bluetooth SETUP screen appears.
Touch [TEL SETUP].
5
TEL SETUP screen appears.
Set each function as follows.
6
* Either the auto response time set on this
unit or the time set on the cell-phone,
whichever is shorter takes effect.
Touch [OK].
7
51English
Setup
Setup
Monitor Screen Setup
You can adjust the image quality of video,
menu screen, etc.
Press the [FNC] button.
1
Popup menu appears.
Touch [Screen Adjust].
2
Screen Adjustment screen appears.
Adjust each setting as follows.
3
■ [Backlight]/[Contrast]/[Black]/
[Brightness]/[Colour]/[Tint]
Adjust each setting.
■ [Aspect]
Select a screen mode.
[Full]: Changes the aspect ratio of video and
displays video fully on the screen.
[Normal]: Displays video at the ratio of 4:3.
[Auto]:
Displays video fully (vertically or
horizontally) with no ratio change.
NOTE
• Settings to adjust vary depending on the current
source.
System Setup
Press the [FNC] button.
1
Popup menu appears.
Touch [].
2
HOME screen appears.
Touch [].
3
See the following section for each setting.
• Set up AV (P. 58)
• Set up display (P.56)
• Set up the user interface ( P.53)
• Set up camera (P.36)
• Set up special (P.56)
• Set up Bluetooth (P.42)
• Set up security ( P.8)
• Set up navigation (P. 39)
52
Setup
User Interface Setup
You can setup user interface parameters.
Press the [FNC] button.
1
Popup menu appears.
Touch [].
2
HOME screen appears.
Touch [].
3
SETUP screen appears.
Touch [User Interface].
4
User Interface screen appears.
Set each parameter as follows.
5
■ [Small Audio Text]
Determine whether to change the text size
for the source control screen smaller.
“ON” (Default)/“OFF”
■ [Steering Remote Controller]
Sets the desired function in the steering
remote controller. See Learning function of steering remote (P.53).
■ [Beep]
Turn the key touch tone on or off.
Default is “ON”.
■ [Widget SETUP]
Set up the widget displayed on the HOME
screen. (P. 18)
■ [Gesture Touch Control Effect]
Determine whether to show the trace of
finger under gesture touch control. (P. 10)
“ON” (Default)/“OFF”
■ [Customize Favorite Key]
Select the function which you wish to set for
[Favorite] icon. (P.54)
■ [Customize FNC Menu]
Select the function which you wish to set for
the function key1 to 3. ( P.55)
■ [Language select]
Select a language.
■ [Touch Panel Adjust]
Adjust the sensing position of the touch
panel. (P. 55)
■ [Time Format]
Select the time display format.
“12-Hour” (Default)/“24-Hour”
■ [Clock]
[GPS-SYNC ](Default): Synchronizes the clock
time with the GPS.
[Manual]: Set the clock manually.
■ [Time Zone]
Select the time zone.
■ [Clock Adjust]
If you select [Manual] for Clock, adjust the
date and time manually. (P. 55)
■ [DISP Key]
Select the source screen displayed when
in the popup menu screen is pressed.
[OFF]: Displays the control screen of the
current source.
[Mirroring] (Default): Switches to the App
screen from the connected iPhone/
Android device or to the Apple CarPlay
screen from the connected iPhone when
the button is pressed. (P. 19)
[NAV]: Switches to the navigation screen from
the connected navigation unit by pressing
the button. (P. 38)
(outside oceania area)
Ñ Learning function of steering
remote
This function is available only when your
vehicle is equipped with the electrical steering
remote controller.
If your steering remote controller is not
compliant, learning may not be completed
and error message may appear.
Touch [Steering Remote Controller] in
1
the User Interface screen.
Steering Remote Controller Setting
screen appears.
Press and hold the steering remote
2
controller button
53English
Setup
NOTE
• You can have the unit learned all buttons
at a time. In that case, press the all buttons
one at a time and after pressing all of them,
touch [Learning completed] in Steering
Remote Controller Setting screen. However,
new functions cannot be learned after this
operation.
Touch the function you want to set.
3
Repeat steps 2 and 3 as necessary.
4
Ñ Customize Favorite key
You can jump to your favorite function easily
from [Favorite] icon.
NOTE
• [Favorite] icon may be disabled on some screens
depending on the registered function. When
this icon is invalid, start the desired function by
normal procedure.
To register a favorite function
Touch [Customize Favorite Key] on the
1
User Interface screen.
Customize Favorite Key screen appears.
Select a favorite function.
2
Touch [Learning completed].
5
NOTE
• When changing the function already learned,
press and hold the button you want to change
in step 2 and then touch to select the changed
function from the function list.
• Confirm the contents of the settable function on
the function list. You cannot edit the function list.
• To initialize the contents, touch [Learning
initialisation] of [Steering Remote
Controller] in User Interface screen. After you
touch [Initialise], a confirmation message
appears. Follow the message and complete the
operation.
54
Touch [Close].
3
NOTE
• You can also change the assignment when you
touch and hold [Favorite] icon on the HOME
screen.
• If it is your first time to touch [Favorite] icon after
installation, Customize Favorite Key screen will
appear.
Setup
Ñ Customize popup menu
functions
You can register a function for each of the
function key1 to 3.
Function key1key2key3
To register a function
Touch [Customize FNC Menu] on the User
1
Interface screen.
Customize FNC Menu screen appears.
Select the function key you want to
2
customize.
The function list screen appears.
Select a function.
3
Ñ Adjust the date and time
manually
Touch [Clock] on the User Interface screen.
1
Select [Manual].
2
Touch [Time Zone] on the User Interface
3
screen.
Select the time zone.
4
Touch [Clock Adjust] on the User Interface
5
screen.
Adjust the date, then adjust the time.
6
Touch [Set].
7
Ñ Touch panel adjustment
Touch [Touch Panel Adjust] on the User
1
Interface screen.
Touch Panel Adjust screen appears.
Follow the instruction on the screen and
2
long touch the center of each [ ].
2
Touch [Close].
4
NOTE
• You can change the assignment when you touch
and hold the desired function key.
1
NOTE
• To cancel the touch panel adjustment, touch
[Cancel].
• To reset it to the default, touch [Reset].
55English
Setup
Special Setup
You can setup special parameters.
Press the [FNC] button.
1
Popup menu appears.
Touch [].
2
HOME screen appears.
Touch [].
3
SETUP screen appears.
Touch [Special].
4
Special screen appears.
Set each parameter as follows.
5
■ [DEMO]
Select the demonstration mode. Default is
“ON”.
■ [Operation Guide Display]
Determine whether to show the touch
screen operation guide screen every time
before HOME screen is displayed.
Default is “ON”.
■ [Software Information]
Confirm the software version of this unit.
(P. 56)
■ [Open Source Licenses]
Display the open source licenses.
■ [Initialise]
Touch [Initialise] and then touch [Yes ] to set
all the settings to the initial default settings.
• Audio SETUP Memory is not initialized.
Ñ Software Information
You can confirm the software version of this
unit.
Touch [Software Information] in the
1
Special screen.
Confirm the software version.
2
NOTE
• For how to update the software, see the relevant
update procedure manual which comes with the
software.
Display Setup
Press the [FNC] button.
1
Popup menu appears.
Touch [].
2
HOME screen appears.
Touch [].
3
SETUP screen appears.
Touch [Display].
4
56
Display screen appears.
Set each parameter as follows.
5
■ [Dimmer]
Select the dimmer mode.
[OFF]: Does not dim the display and buttons.
[ON]: Dims the display and buttons.
[SYNC ](Default): Turns the dimmer function
on or off when the vehicle light control
switch is turned on or off.
Setup
■ [OSD Clock]
Select if you want to display the clock while
the screen is off, or while watching video files
(USB), etc.
“ON” (Default)/“OFF”
■ [Wallpaper Customize]
You can change the wallpaper image or
color. (P. 57)
■ [Viewing Angle]
If it is hard to see the image on the screen
evenly, adjust the viewing angle. The smaller
the (negative) value, the more whitish the
image on the screen looks.
“0” (Default)/“-1”/“-2”/“-3”
■ [Screen transition effect]
Select whether to use the screen transition
effect when the source control screen is
switched to the Home screen.
"ON" (Default)/ "OFF"
Ñ Change the wallpaper image
Touch [Wallpaper Customize] on the
1
Display screen.
Select an image from live or static
2
wallpapers.
To select wallpaper color
Touch [Wallpaper Colour] on the
1
Wallpaper Customize screen.
Select a wallpaper color.
2
Touch [ ].
3
To register an original color
You can register your original color.
Touch [User] on the Wallpaper Colour
1
screen.
Touch [Adjust].
2
Use [–] and [+] to adjust each color value.
3
1
*
1
*
Select a wallpaper color in advance.
2
*
Select an original image in advance.
Touch [ ].
4
2
*
57English
Setup
To register an original image
You can load an image from the connected
USB device and set it as the wallpaper image.
Before starting this procedure, it is necessary to
connect the device which has the image to load.
Touch [User1 Select] on the Wallpaper
1
Customize screen.
Select the image to load.
2
Touch [Enter].
3
The selected image is loaded and
the display returns to the Wallpaper
Customize screen.
NOTE
• Touching [] rotates the image counterclockwise.
Select the device to be used in the Android
Auto mode. (P. 59)
■ [Apple CarPlay Device List]
Select the device to be used in the Apple
CarPlay mode. (P. 20)
■ [Speech Quality Adjust]
You can adjust the speech quality.
[Microphone Level]: Adjust the volume of
your voice.
Default is “0”.
[Echo Cancel Level]: Adjust the level of echo
cancellation.
Default is “0”.
[Noise Reduction Level]: Reduce the
noise generated in the surrounding
environment without changing the
microphone volume. Use this function
when the voice of caller is not clear.
Default is “0”.
58
Setup
■ [TV Tuner Control]*
Sets when connecting the TV tuner to AV
INPUT.
[ON]: Set to ON when connecting the 3rd
party TV tuner. AV-IN Name is set to TV. If
you connect the TV tuner made by DOS
and watch TV, you can perform some
simple operations by touching the screen
of this unit.
[OFF] (Default): Set to OFF when not
connecting the 3rd party TV tuner.
■ [AV-OUT]
You can select an AV source to be output
from the AV OUTPUT port.
OFF, AV-IN, USB, or iPod
• You cannot select AV-IN if the AV-IN is set to
[NONE] on the Camera Assignment Setting
screen.
• You cannot select iPod if it is connected via
Bluetooth.
• If you select USB, iPod, Tuner, Spotify or
Bluetooth audio as the main source, you
cannot select USB or iPod as the AV output
source.
• If you select Wireless Mirroring, Apple
CarPlay or Android Auto as the main
source, you cannot select USB or iPod as
the AV output source.
■ [Driving Position]
Select the driving position (left or right).
“Left”/“Right” (Default)
■ [Wi-Fi SETUP]
You can change the device name and display
the device address, password. See Change the device name (P.23).
Ñ Select an Android device
(KW-M950BW)
Touch [Android Auto Device Select] on
1
the AV screen.
Select an Android device.
2
* This can be selected when the AV-IN is set to
[NONE] on the Camera Assignment Setting
screen.
59English
Controlling Audio
Controlling Audio
You can adjust various settings such as audio
balance or subwoofer level.
Press the [FNC] button.
1
Popup menu appears.
Touch [].
2
HOME screen appears.
Touch [].
3
SETUP screen appears.
Touch [Audio].
4
See the following section for each setting.
• Set up speaker / X’over ( P.61)
• Controlling EQ / SW Level (P. 63)
• Set listening Position / DTA (P. 67)
• Controlling general audio (Fader /
Balance) (P. 63)
• Set volume offset (P. 64)
• Performing zone control (P. 65)
• Set sound effect (P.66)
• Memory/recall the audio settings
(P. 69)
3-way speaker system setup
Select the appropriate crossover network
mode for the speaker system used (2-way or
3-way speaker system).
Press the [FNC] button.
1
Popup menu appears.
Touch [].
2
HOME screen appears.
Touch [].
3
Source selection screen appears.
Touch [AV Off].
4
Press the [FNC] (1) button and the [–] (2)
5
button for 1 second at the same time.
Speaker system select screen appears.
Select the crossover network mode.
6
A confirmation screen appears.
Touch [Yes ].
7
NOTE
• When the 3-way speaker system is selected, the
following functions are disabled.
– Front focus of Listening Position / DTA
– Fader for Controlling General Audio
– Zone Control
– Selection of the speakers to output sound from
the cell-phone of Bluetooth HF/Audio
– Beep for User Interface Setup
• Connecting 3-way speakers with the 2-way mode
selected can break the speakers.
12
60
Controlling Audio
Speaker / X’over setup
Press the [FNC] button.
1
Popup menu appears.
Touch [].
2
HOME screen appears.
Touch [].
3
SETUP screen appears.
Touch [Audio].
4
Audio screen appears.
Touch [Speaker / Xʼover].
5
Select a car type.
6
You can select the car type and speaker
network, etc.
When you select your car type, the Delay
Time Alignment is activated automatically
(for timing adjustment of sound output for
each channel) to have the highest surround
effects.
■ [Location] (Only for Front, Rear)
Select the speaker position you have
installed.
■ [Tweeter] (Only for Front)
You can set up the tweeter when you are
selecting front speakers.
None, Small, Medium, Large
■ [Xʼover]
Display the speaker crossover setup screen.
You can adjust the crossover frequency that
was set automatically when you selected the
speaker type.
For details, see Crossover network setup
(P. 62)
When Speaker network is set to 3-way:
1
2
NOTE
• For how to switch to the 3-way speaker system,
see 3-way speaker system setup (P.60).
Connecting 3-way speakers with the 2-way mode
selected can break the speakers.
• Select “None” if you have no speakers.
Touch the speaker (1) you wish to adjust
7
and set each parameter (2) as follows.
1
2
■ [Speaker]
You can select a speaker type and its size to
get the best sound effects.
When the speaker type and size are selected,
the speaker crossover network is set
automatically.
61English
Controlling Audio
Ñ Crossover network setup
You can set the crossover frequency of
speakers.
Touch [Xʼover].
1
Touch the speaker to set up.
2
3
Only when “Subwoofer” is set to a mode
*
other than “None” in [Speaker Setup].
When Speaker network is set to 3-way:
Set each parameter as follows.
3
■ [HPF FREQ]
High Pass Filter adjustment. (When Front or
Rear is selected on the Speaker Select screen)
■ [LPF FREQ]
Low Pass Filter adjustment. (When
Subwoofer is selected on the Speaker Select
screen)
■ [Slope]*
1
Set a crossover slope.
■ [Gain]
Adjust the gain of the front speaker, rear
speaker, or subwoofer.
■ [TW Gain] *
2
Adjust the tweeter level. (When Front is
selected on the Speaker Select screen)
■ [Phase Inversion]*
3
Set the phase of subwoofer output.
Check [Phase Inversion] to shift the phase
180 degrees. (When Subwoofer is selected
on the Speaker Select screen)
■ [FREQ] (High Pass)
High Pass Filter adjustment.
■ [HPF FREQ], [LPF FREQ] (Band Pass)
Band Pass Filter adjustment. (When Mid
Range Speaker is selected on the Speaker
Select screen)
■ [FREQ] (Low Pass)
Low Pass Filter adjustment. (When Woofer is
selected on the Speaker Select screen)
1 *2
■ [Slope]*
Set a crossover slope.
■ [Gain]
Set the gain of each speaker.
■ [Phase Inversion]
Set the phase of tweeter, mid range, and
woofer output.
Check [Phase Inversion] to shift the phase
180 degrees.
1
*
Only when “LPF FREQ”/“HPF FREQ” (Band
Pass) is set to a mode other than “Through”
in [Xʼover].
2
*
Only when “FREQ” (Low Pass) is set to a
mode other than “Through” in [Xʼover].
NOTE
• For how to switch to the 3-way speaker system,
see 3-way speaker system setup (P.60).
Connecting 3-way speakers with the 2-way mode
selected can break the speakers.
62
1
*
Only when “LPF FREQ”/“HPF FREQ” is set to
a mode other than “Through” in [Xʼover].
2
*
Only when “Tweeter” is set to “Small”,
“Medium”, “Large” in [Speaker Setup].
Controlling Audio
Controlling General Audio
Press the [FNC] button.
1
Popup menu appears.
Touch [].
2
HOME screen appears.
Touch [].
3
SETUP screen appears.
Touch [Audio].
4
Audio screen appears.
Touch [Fader / Balance].
5
Set each parameter as follows.
6
Equalizer Control
You can adjust equalizer by selecting the
optimized setting for each category.
Press the [FNC] button.
1
Popup menu appears.
Touch [].
2
HOME screen appears.
Touch [].
3
SETUP screen appears.
Touch [Audio].
4
Audio screen appears.
Touch [EQ / SW Level].
5
Touch the screen and set the Graphic
6
Equalizer as desired.
■ [Fader], [Balance]
Adjust the volume balance around the
touched area.
[C] and [D] adjust the right and left volume
balance.
[R] and [S] adjust the front and rear volume
balance.
■ [Center]
Clear the adjustment.
■ Gain level (area in dotted frame)
Adjust the gain level by touching each
frequency bar.
You can select a frequency bar and adjust its
level by [R], [S].
■ [Preset Select]
Display the screen for selecting the preset
equalizer curve. (P.64)
■ [Memory]
Saves the adjusted equalizer curve as “User1”
to “User4”. ( P.64)
■ [Initialise]
Initialize (flatten) the current EQ curve.
■ [ALL SRC]
Apply the adjusted equalizer curve to all
sources. Touch [ALL SRC] and then touch [OK] on the confirmation screen.
63English
Controlling Audio
■ [Bass EXT] (Bass Extend Settings)
When turned on, the frequencies lower than
62.5 Hz is set to the same gain level (62.5 Hz).
■ [SW Level]
Adjust the subwoofer volume. This setting
is not available when Subwoofer is set to
“None”. See Speaker / X’over setup (P.61).
Ñ Recall the EQ curve
Touch [Preset Select].
1
Select an EQ curve.
2
NOTE
• [iPod] is available for the iPod, Apple CarPlay, and
Spotify sources and it is connected via USB.
Ñ Save the EQ curve
Volume Offset
Finely adjust the volume of the current source
to minimize the difference in volume between
different sources.
Press the [FNC] button.
1
Popup menu appears.
Touch [].
2
HOME screen appears.
Touch [].
3
SETUP screen appears.
Touch [Audio].
4
Audio screen appears.
Touch [Volume Offset].
5
Touch [+] or [–] to adjust the level.
6
Adjust the EQ curve.
1
Touch [Memory].
2
Select where to save.
3
64
■ [Initialise]
Returns to the initial settings.
NOTE
• If you have increased the volume first, then
reduce the volume using “Volume Offset”.
Switching the current source to another source
suddenly may output extremely loud sound.
Zone Control
You can select different sources for front and
rear positions in the vehicle.
Press the [FNC] button.
1
Popup menu appears.
Touch [].
2
HOME screen appears.
Touch [].
3
SETUP screen appears.
Touch [Audio].
4
Audio screen appears.
Touch [Zone Control].
5
Controlling Audio
Set each source as follows.
8
■ [Zone Select]
Touch [Single Zone] to turn off the dual
zone function.
■ [Front Source], [Rear Source]
Select an audio source for each.
Rear Source;
“AV-IN”/“iPod”/“USB”/“OFF”
■ [Rear VOL.]
Adjust the rear source volume.
Zone Control screen appears.
Touch [Zone Select].
6
Touch [Dual Zone].
7
NOTE
• When the rear speaker sound is switched, the
audio source that is output at the AV OUTPUT
terminal is also switched to the same source.
• When the dual zone function is set to on, the
following functions are not available.
– Output from the subwoofer
– Subwoofer Level/Bass Boost ( P.66)
– Equalizer Control/Sound Effect/Listening
• To initialize the Delay and Level settings, touch
[Initialise] and [YES] on the confirmation screen.
67English
Controlling Audio
Ñ Front Focus
You can focus the imaginary sound image on
the front of the selected seat.
Touch [Front Focus] in the Position / DTA
1
screen.
Select a front focus position.
2
For [Front All] and [All], select Priority L or R
depending on which side you want to put
the imaginary sound image.
Ñ Front Focus fine adjustment
Touch [Adjust].
1
Touch [Delay].
2
Set each parameter as follows.
3
■ [Sound Image LR (Front)]
Focus the sound image on the front of front
seats.
■ [Sound Image LR (Rear)]
Focus the sound image on the front of rear
seats.
■ [Size of the Virtual Sound Field]
Adjust the size of sound image to meet your
taste. If the sound image is shifted from the
front, move it back by [Sound Image LR (Front)] or [Sound Image LR (Rear)].
■ [Subwoofer Delay]
Adjust the delay time of subwoofer sound.
Touch [Level].
4
Touch [T] or [U] to adjust the sound level
5
of the selected speaker.
68
NOTE
• To initialize the Delay and Level settings, touch
[Initialise] and [YES] on the confirmation screen.
Audio Setup memory
Audio Control settings can be memorized.
The memorized settings can be recalled at any
time.
Press the [FNC] button.
1
Popup menu appears.
Touch [].
2
HOME screen appears.
Touch [].
3
SETUP screen appears.
Touch [Audio].
4
Audio screen appears.
Touch [Audio Memory].
5
■ [SETUP Memory]
Lock or unlock the Audio SETUP Memory/
Recall/Clear.
Clear the Audio SETUP Memory and the
currently memorized audio settings.
Controlling Audio
69English
Remote control
Remote control
This unit can be operated using the remote
control.
# WARNING
• Do not ingest the battery, Chemical Burn
Hazard
The remote control supplied with this product
contains a coin/button cell battery. If the coin/
button cell battery is swallowed, it can cause
severe internal burns in just 2 hours and can
lead to death.
Keep new and used batteries away from
children. If the battery compartment does not
close securely, stop using the product and
keep it away from children.
If you think batteries might have been
swallowed or placed inside any part of the
body, seek immediate medical attention.
# CAUTION
• Put the remote control in a place where it will
not move during braking or other operations.
A dangerous situation could result, if the
remote control falls down and gets wedged
under the pedals while driving.
• Do not leave the battery near fire or under
direct sunlight. A fire, explosion or excessive
heat generation may result.
• Do not recharge, short, break up or heat the
battery or place it in an open fire. Such actions
may cause the battery to leak fluid. If spilled
fluid comes in contact with your eyes or on
clothing, immediately rinse with water and
consult a physician.
• Danger of explosion if Lithium battery is
incorrectly replaced. Replace only with the
same or equivalent type.
Ñ Removing the battery sheet
Pull the battery sheet out from the remote
controller to activate the battery.
Ñ Changing the battery of the
remote controller
CR2025 (+side)
• Use a commercially available button battery
(CR2025).
• Insert the battery with the + and – poles
aligned properly.
– If the effectiveness of the remote controller
decreases, replace the battery.
Functions of the Remote
control Buttons
70
Remote control
Key
Function
Name
SRCSwitches to the source to be played.
VOL + –Adjusts the volume.
AT TLowers the volume when pressed
DISPSwitches the screen between the
FM/R
AM/S
E 2
F 3
ANGLENot used.
DIRECTSwitches to the direct search mode.
ASPECTChanges the aspect ratio.
Numeric
Keypad
CLRDeletes a character while in direct
ENTNot used.
In hands-free mode, hangs up the
phone.
once.
Restores the previous volume when
pressed twice.
current source and the App screen
from the connected iPhone/Android.
Selects the folder to be played.
For the tuner source, selects FM/AM
band to be received.
Selects the track or file to be played.
For the tuner source, switches to
broadcast stations received by the
unit.
When a call comes in, answers the call.
For details on the direct search mode,
see Direct search mode (P.71).
• To confirm the current aspect ratio
setting, operate on the touch panel.
(P. 52)
• Allows you to enter the number to
search in the direct search mode.
For details on the direct search
mode, see Direct search mode (P. 71).
• For the tuner source, allows you to
enter the preset number.
– If the preset number is single
digit, press the number.
search mode.
Ñ Direct search mode
Using the remote control, you can jump
directly to the desired station by entering the
frequency value.
Press the [SRC] button several times until
1
the desired content appears.
Press the [DIRECT] button.
2
Enter the frequency value of the station
3
you want to listen using the numeric
keypad.
Press the [E] or [F] button.
4
The station corresponding to the
number you entered is received.
71English
Connection/Installation
Connection/Installation
Before Installation
Before installation of this unit, please note the
following precautions.
# WARNINGS
• If you connect the ignition wire (red) and
the battery wire (yellow) to the car chassis
(ground), you may cause a short circuit, that
in turn may start a fire. Always connect those
wires to the power source running through
the fuse box.
• Do not cut out the fuse from the ignition wire
(red) and the battery wire (yellow). The power
supply must be connected to the wires via
the fuse.
# CAUTION
• Install this unit in the console of your vehicle.
Do not touch the metal part of this unit during
and shortly after the use of the unit. Metal part
such as the heat sink and enclosure become
hot.
NOTE
• Mounting and wiring this product requires
skills and experience. For best safety, leave the
mounting and wiring work to professionals.
• Make sure to ground the unit to a negative 12V
DC power supply.
• Do not install the unit in a spot exposed to
direct sunlight or excessive heat or humidity.
Also avoid places with too much dust or the
possibility of water splashing.
• Do not use your own screws. Use only the
screws provided. If you use the wrong screws,
you could damage the unit.
• If the power is not turned ON (“ There is an
error in the speaker wiring. Please check the
connections.” is displayed), the speaker wire
may have a short-circuit or touched the chassis
of the vehicle and the protection function may
have been activated. Therefore, the speaker
wire should be checked.
• If your car’s ignition does not have an ACC
position, connect the ignition wires to a power
source that can be turned on and off with the
ignition key. If you connect the ignition wire to
a power source with a constant voltage supply,
such as with battery wires, the battery may be
drained.
• If the console has a lid, make sure to install the
unit so that the front panel will not hit the lid
when closing and opening.
• If the fuse blows, first make sure the wires
aren’t touching to cause a short circuit, then
replace the old fuse with one with the same
rating.
• Insulate unconnected wires with vinyl tape or
other similar material. To prevent a short circuit,
do not remove the caps on the ends of the
unconnected wires or the terminals.
• Connect the speaker wires correctly to the
terminals to which they correspond. The unit
may be damaged or fail to work if you share
the ¤ wires or ground them to any metal part
in the car.
• When only two speakers are being connected
to the system, connect the connectors either
to both the front output terminals or to both
the rear output terminals (do not mix front
and rear). For example, if you connect the ¢
connector of the left speaker to a front output
terminal, do not connect the ¤ connector to
a rear output terminal.
• After the unit is installed, check whether the
brake lamps, blinkers, wipers, etc. on the car
are working properly.
• Mount the unit so that the mounting angle is
30° or less.
• This unit has the cooling fan to decrease the
internal temperature. Do not mount the unit
in a place where the cooling fan of the unit is
blocked. Blocking these openings will inhibit
the cooling of the internal temperature and
result in malfunction.
Cooling fan
72
Connection/Installation
• Do not press hard on the panel surface when
installing the unit to the vehicle. Otherwise
scars, damage, or failure may result.
• Reception may drop if there are metal objects
near the Bluetooth antenna.
Bluetooth antenna unit
Ñ Supplied accessories for
installation
1
x1
2
(Black 1 m)
3
(Gray 1 m)
4
(3 m)
x1
x1
9
x1
0
x1
Ñ Installation procedure
1) To prevent a short circuit, remove the key
from the ignition and disconnect the ¤
terminal of the battery.
2) Make the proper input and output wire
connections for each unit.
3) Connect the speaker wires of the wiring
harness.
4) Connect the wiring harness wires in the
following order; ground, battery, ignition.
5) Connect the wiring harness connector to the
unit.
6) Install the unit in your car.
7) Reconnect the ¤ terminal of the battery.
8) Perform the Initial Setup.
See Initial setup (P.7).
x1
5
(M5 x 8 mm)
6
(M5 x 8 mm)
7
8
(3.5 m)
x6
x6
x1
x1
73English
Connection/Installation
Installing the unit
5 or 6
NOTE
• Make sure that the unit is installed securely in
place. If the unit is unstable, it may malfunction
(eg, the sound may skip).
Car Bracket
5 or 6
Ñ Trim plate
1) Attach accessory 7 to the unit.
7
Ñ GPS antenna
GPS antenna is installed inside of the car. It
should be installed as horizontally as possible to
allow easy reception of the GPS satellite signals.
To mount the GPS antenna inside your vehicle:
1) Clean your dashboard or other surface.
2) Remove the separator of the metal plate
(accessory 9).
3) Press the metal plate (accessory 9) down
firmly on your dashboard or other mounting
surface. You can bend the metal plate
(accessory 9) to conform to a curved surface,
if necessary.
4) Remove the separator of the GPS antenna
(accessory 8), and stick the antenna to the
metal plate (accessory 9).
NOTE
• Use the supplied GPS antenna. Using the GPS
antenna other than the supplied one may cause a
drop in positioning accuracy.
• Depending on the type of car, reception of the
GPS satellite signals might not be possible with
an inside installation.
• Please install this GPS antenna in an area away
from any antennas that are used with CB radios or
satellite televisions.
• The GPS antenna should be installed at a position
that is spaced at least 12 inch (30 cm) from
cellular phone or other transmitting antennas.
Signals from the GPS satellite may be interfered
with by these types of communication.
• Painting the GPS antenna with (metallic) paint
may cause a drop in performance.
Ñ Microphone unit
1) Check the installation position of the
microphone (accessory 4).
2) Clean the installation surface.
3) Remove the separator of the microphone
(accessory 4), and stick the microphone to
the place shown below.
4) Wire the microphone cable up to the unit
with it secured at several positions using tape
or other desired method.
5) Adjust the direction of the microphone
(accessory 4) to the driver.
4
Fix a cable with a commercial item of tape.
74
8
9
Ñ Connecting wires to terminals
Fuse (15A)
Connect to the vehicle’s
parking brake detection
switch harness.
PRK SW
Ignition key switch
Car fuse box
Battery
Light Green
(Parking sensor wire) (2 m)
For best safety, be sure to connect
the parking sensor.
Red
(Ignition wire)
Yellow
(Battery wire)
Black
(Ground wire) ¤
(To car chassis)
Accessory 1
Connection/Installation
White
White/Black
Gray
Gray/Black
Green
Green/Black
Purple
Purple/Black
If no connections are made, do not let the
cable come out from the tab.
Blue/White
(Power control wire)
Speaker impedance: 4-8 Ω
To front left speaker
To front right speaker
To rear left speaker
To rear right speaker
P. CONT
When using the optional power amplifier,
connect to its power control terminal.
(Max. 200mA, 12V)
Light Blue/Yellow
(Steering remote control wire)
STEERING WHEEL
REMOTE CONT
To steering remote
To use the steering wheel remote control
feature, you need an exclusive remote
adapter (not supplied) matched to your car.
REMOTE INPUT
Pink
(Speed Pulse Input) (2 m)
S SENS
Connect to the vehicle’s speed pulse harness.
Do not cut the “S SENS” tag or failure may result.
Purple/White
(Reverse sensor wire) (2 m)
REVERSE
Connect to vehicle’s reverse lamp harness when using
the optional rear view camera.
Orange/White
(Dimmer control wire)
To car light control switch
Blue
(Antenna control wire)
Depending on what antenna you are using,
connect either to the control terminal of the motor
antenna, or to the power terminal for the booster
amplifier of the film-type antenna. (Max. 300mA,
12V)
ILLUMI
ANT CONT
75English
Connection/Installation
Ñ 3-way speaker system setup
Subwoofer Preout
Mid Range Preout
Tweeter Preout
When connecting to an external amplifier,
connect its ground wire to the car’s chassis to
avoid damaging the unit.
Preout
RCA Cable
(Sold separately)
Power amplifier
(optional
accessory)
Input
White
+
White/Black
Gray
+
Gray/Black
Green
+
Green/Black
Purple
+
Purple/Black
NOTE
• For speaker system setup, see 3-way speaker
system setup (P.60).
• For speaker setup and crossover setup, see
Speaker / X’over setup (P.61).
• For how to connect speaker wires to terminals
other than speaker terminals and Preout
terminals, see Connecting the system and
external components (P.76) and Connecting
wires to terminals (P.75).
Speaker
To mid range left
speaker
To mid range right
speaker
To tweeter left speaker
To tweeter right
speaker
Speaker impedance: 4-8 Ω
Ñ Connecting the system and
external components
12
11
10
89
1
2
3
AV Audio output (ø3.5 mini jack)
1
FM/AM antenna input
2
When connecting to an external amplifier,
3
connect its ground wire to the car’s chassis to
avoid damaging the unit.
Rear Audio Preout
(Left; White, Right; Red)
Front Audio Preout
(Left; White, Right; Red)
Subwoofer Preout
(Left; White, Right; Red)
TV tuner remote output
4
External navigation interface
5
(Not-covered areas: Oceania)
This jack accepts either AV-IN (1; Left audio, 2;
6
Right audio, 3; Ground, 4; VIDEO) or Side (Left or
Right) view camera input. *
For more information, see To set up the camera assignment settings (P.37).
1 2 3 4
Accessory 8: GPS Antenna
7
Use the supplied GPS antenna. Using the GPS
antenna other than the supplied one may
cause a drop in positioning accuracy.
Accessory 4: Bluetooth Microphone
8
6547
1
76
Connection/Installation
Accessory 0: Steering remote harness
9
Connect to vehicle’s steering remote harness.
Contact your JVC dealer for details.
Rear view camera input (Yellow)
10
Front view camera input (Yellow) *
11
For more information, see To set up the
2
camera assignment settings (P.37).
VIDEO Output (Yellow)
12
*1 Front view camera can also be connected to [
6
].
*2 Side (Left or Right) view camera can also be
connected to [
11
].
Ñ Connecting a USB device
Accessory 2 (Black) (1 m)
USB device
[2]
USB (Gray) terminal
USB (Black) terminal
Accessory 3 (Gray) (1 m)
[3]
[1]
[1]
Ñ Connecting an iPod/iPhone
● Lightning connector
iPod/iPhone
KS-U62 (0.8m)
[3]
KS-U62 (0.8m)
[3]
Accessory 3 (Gray) (1 m)
Accessory 2 (Black) (1 m)
USB (Gray) terminal
USB (Black) terminal
iPhone (with Apple CarPlay)
[3]
[4]
[1]
[1]
[2]
[4]
[2]
[1]
USB maximum power supply current :
DC 5 V = 1.5 A
[2]
Sold separately
[3]
See Securing the USB extension cable
(P. 78).
[1]
USB maximum power supply current :
DC 5 V = 1.5 A
[2]
Sold separately
[3]
Optional accessory
[4]
See Securing the USB extension cable
(P. 78).
77English
Connection/Installation
Ñ Connecting an Android
smartphone
Android smartphone
Micro USB to USB cable
Accessory 2 (Black) (1 m)
[1]
USB maximum power supply current :
DC 5 V = 1.5 A
[2]
Sold separately
[3]
See Securing the USB extension cable
(P. 78).
[2]
Accessory 3 (Gray) (1 m)
USB (Gray) terminal
USB (Black) terminal
[3]
[1]
[1]
Ñ Securing the USB extension
cable
Secure the USB extension cable with insulating
tape or the like so that its connectors are not
disconnected.
Ñ Connecting the camera
AV cable
[1]
[1]
[1]
[1]
AV-IN input
[2]
Left Side View Camera and Right
Side View Camera
Front view camera
[3]
[2]
Front view camera input (Yellow)
Rear view camera
Rear view camera
input (Yellow)
[1]
Sold separately
[2]
Up to 2 cameras of Front view camera, Left
Side View Camera and Right Side View Camera
can be connected. For more information, see
[Camera Assignment Settings] (P.36).
78
Troubleshooting
Troubleshooting
Problems and Solutions
If any trouble occurs, first check the following
table for possible problems.
NOTE
• Some functions of this unit may be disabled by
some settings made on this unit.
• What might seem to be a malfunction in your
unit may just be the result of slight misoperation
or miswiring.
Ñ About settings
• Cannot set up the subwoofer.
• Cannot set up subwoofer phase.
• No output from the subwoofer.
• Cannot set up the low pass filter.
• Cannot set up the high pass filter.
Subwoofer is not set to on.
Set the subwoofer to on. See Speaker / X’over
setup (P.61).
The dual zone function is enabled.
Set the dual zone function to off. See Zone Control
(P. 65).
• Cannot select the output destination of the
subsource in the dual zone.
• Cannot adjust the volume of the rear speakers.
The dual zone function is disabled.
Set the dual zone function to on. See Zone Control
(P. 65).
• Cannot set up the equalizer.
• Cannot set up the crossover network.
The dual zone function is enabled.
Set the dual zone function to off. See Zone Control
(P. 65).
Ñ About audio operations
Radio reception is poor.
The car antenna is not extended.
Pull out the antenna all the way.
The antenna control wire is not connected.
Connect the wire correctly. See Connecting the
system and external components (P.76).
Cannot select a folder.
The random play function is enabled.
Turn off the random function.
The sound skips when an audio file is being
played.
The recording condition is bad.
Record the file again.
Ñ Others
The Touch Sensor Tone doesn’t sound.
The preout jack is being used.
The Touch Sensor Tone cannot be output from the
preout jack.
Error Messages
When you fail to operate the unit correctly, the
cause of the failure appears as the message on
the screen.
There is an error in the speaker wiring. Please
check the connections.
Protective circuit has been activated because a speaker
cord has shorted or it has come in contact with the car
chassis.
Wire or insulate the speaker cord as appropriate and
turn the power off and on again.
Hot Error
When the internal temperature of this unit rises to 60°C
or more, the protection circuit is activated and you may
not be able to operate the unit.
Use the unit again after reducing the temperature
of the unit.
Error 07–67
The unit is not operating correctly due to some reason
or other.
Turn the power off and on again. If the “Error 07−67”
message does not disappear, contact your nearest
JVC dealer.
No Device (USB device)
The USB device is selected as a source although no USB
device is connected.
Change the source to any source other than USB/
iPod. Connect a USB device, and change the source
to USB again.
Disconnected (iPod, Bluetooth audio player)
The iPod/Bluetooth audio player is selected as a source
although no iPod/Bluetooth audio player is connected.
Change the source to any source other than iPod/
Bluetooth. Connect an iPod/Bluetooth audio player,
and change the source to iPod/Bluetooth again.
No Media file
The connected USB device contains no playable audio
file. Media was played that doesn’t have data recorded
that the unit can play.
See Playable Media and Files (P.81) and try
another USB device.
79English
Troubleshooting
USB device over current status detected.
The connected USB device is rated a current capacity
higher than the allowable limit.
Check the USB device. Some trouble may have
occurred to the connected USB device.
Change the source to any source other than USB.
Remove the USB device.
Ñ Apple CarPlay
The speed sensor must be connected to use
Apple CarPlay wirelessly. Please verify the proper
connections or plug in by USB to use Apple
CarPlay.
The speed pulse is not detected when the Apple
CarPlay is started by connecting wirelessly or when
the iPhone compatible with wireless Apple CarPlay is
registered in [Apple CarPlay Device List].
Check the connection of the speed pulse or plug in
over USB to use Apple CarPlay.
The GPS antenna must be connected to use
Apple CarPlay wirelessly. Please verify the proper
connections or plug in by USB to use Apple
CarPlay.
The GPS antenna is not connected when the Apple
CarPlay is started by connecting wirelessly or when
the iPhone compatible with wireless Apple CarPlay is
registered in [Apple CarPlay Device List].
Check the connection of the GPS antenna or plug in
over USB to use Apple CarPlay.
The speed sensor and the GPS antenna must be
connected to use Apple CarPlay wirelessly. Please
verify the proper connections or plug in by USB to
use Apple CarPlay.
The speed pulse is not detected and the GPS antenna
is not connected when the Apple CarPlay is started by
connecting wirelessly or when the iPhone compatible
with wireless Apple CarPlay is registered in [Apple CarPlay Device List].
Check the connection of the speed pulse and the
GPS antenna or plug in over USB to use Apple
CarPlay.
80
Appendix
Appendix
Playable Media and Files
You can play various kinds of media and files on this unit.
Ñ About files
The following audio and video files are supported.
■ Playable Audio files
FormatBit rateSampling frequencyBit count
AAC-LC (.m4a) MPEG-2/MPEG-4 AAC LC
MP3 (.mp3)MPEG-1/MPEG-2 Audio
WMA (.wma)Windows Media Audio
Linear PCM
(WAVE) (.wav)
FLAC (.flac) flac–16 – 192 kHz16 bit/24 bit
Vorbis (.ogg)vorbisVBR16 – 48 kHz16 bit
• WMA and AAC files with DRM cannot be played.
• Although the audio files complies with the standards listed above, they may not be played depending on the types or
conditions of media or device.
• This unit supports playback of High-Resolution Audio files.
It is recommended that a car audio system should be configured with all High-Resolution Audio compatible products
from player to speaker to enjoy its high quality sound.
Through
Slope: -12/-18/-24 dB/Oct.
Gain: -8/-7/-6/-5/-4/-3/-2/-1/0 dB
Low pass filter
Frequency: 30/40/50/60/70/80/90/100/120/150 Hz,
Through
Slope: -12/-18/-24 dB/Oct.
Gain: -8/-7/-6/-5/-4/-3/-2/-1/0 dB
83English
Appendix
■ General
Operating Voltage
: 12 V DC car battery
Current Consumption
: 15 A
Installation Dimensions (W × H × D)
: 178 × 100 × 155 mm
Weight
: 1.7 kg
NOTE
• Although the effective pixels for the liquid crystal
panel is given as 99.99% or more, 0.01% of pixels
may not light or may light incorrectly.
Specifications are subject to change without
prior notice.
About this Unit
■ Copyrights
• The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth SIG, Inc. and any
use of such marks by JVC KENWOOD Corporation is
under license. Other trademarks and trade names are
those of their respective owners.
• This item incorporates copy protection technology
that is protected by U.S. patents and other
intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are prohibited.
• Microsoft and Windows Media are either registered
trademarks or trademarks of Microsoft Corporation in
the United States and/or other countries.
• This software is based in part on the work of the
independent JPEG Group.
• The “AAC” logo is a trademark of Dolby Laboratories.
• Use of the Made for Apple badge means that an
accessory has been designed to connect specifically
to the Apple product(s) identified in the badge, and
has been certified by the developer to meet Apple
performance standards. Apple is not responsible for
the operation of this device or its compliance with
safety and regulatory standards. Please note that the
use of this accessory with an Apple product may
affect wireless performance.
• Apple, iPhone, iPod, iPod touch, and Lightning are
trademarks of Apple Inc., registered in the U.S. and
other countries.
• Apple, Siri, Apple CarPlay and Apple CarPlay logo are
trademarks of Apple Inc., registered in the U.S. and
other countries.
• SPOTIFY and the Spotify logo are among the
registered trademarks of Spotify AB.
• Android, Android Auto, Google Play and other marks
are trademarks of Google LLC.
• Wi-Fi® is a registered trademark of Wi-Fi Alliance®.
• The Wi-Fi CERTIFIED™ Logo is a certification mark of
Wi-Fi Alliance®.
• This product includes FontAvenue® fonts licenced
by NEC Corporation.FontAvenue is a registered
trademark of NEC Corporation.
• THIS PRODUCT IS LICENSED UNDER THE AVC PATENT
PORTFOLIO LICENSE FOR THE PERSONAL USE OF A
CONSUMER OR OTHER USES IN WHICH IT DOES NOT
RECEIVE REMUNERATION TO (¡)ENCODE VIDEO IN
COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”)
AND/OR (¡¡)DECODE AVC VIDEO THAT WAS ENCODED
BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY
AND/OR WAS OBTAINED FROM A VIDEO PROVIDER
LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS
GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE.
ADDITIONAL INFORMATION MAY BE OBTAINED FROM
MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM
• THIS PRODUCT IS LICENSED UNDER THE MPEG-4
VISUAL PATENT PORTFOLIO LICENSE FOR THE
PERSONAL AND NON-COMMERCIAL USE OF A
CONSUMER FOR (¡) ENCODING VIDEO IN COMPLIANCE
WITH THE MPEG-4 VISUAL STANDARD (“MPEG-4
VIDEO”) AND/OR (¡¡) DECODING MPEG-4 VIDEO
THAT WAS ENCODED BY A CONSUMER ENGAGED
IN A PERSONAL AND NON-COMMERCIAL ACTIVITY
AND/OR WAS OBTAINED FROM A VIDEO PROVIDER
LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO.
NO LICENSE IS GRANTED OR SHALL BE IMPLIED
FOR ANY OTHER USE. ADDITIONAL INFORMATION
INCLUDING THAT RELATING TO PROMOTIONAL,
INTERNAL AND COMMERCIAL USES AND LICENSING
MAY BE OBTAINED FROM MPEG LA, LLC. SEE HTTP://
WWW.MPEGLA.COM.
• THIS PRODUCT IS LICENSED UNDER THE VC-1 PATENT
PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO ( i ) ENCODE
VIDEO IN COMPLIANCE WITH THE VC-1 STANDARD
(“VC-1 VIDEO”) AND/OR ( ii ) DECODE VC-1 VIDEO
THAT WAS ENCODED BY A CONSUMER ENGAGED
IN A PERSONAL AND NON-COMMERCIAL ACTIVITY
AND/OR WAS OBTAINED FROM A VIDEO PROVIDER
LICENSED TO PROVIDE VC-1 VIDEO. NO LICENSE IS
GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE.
ADDITIONAL INFORMATION MAY BE OBTAINED FROM
MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM
• libFLAC
Copyright (C) 2000-2009 Josh Coalson
Copyright (C) 2011-2013 Xiph.Org Foundation
Redistribution and use in source and binary forms,
with or without modification, are permitted provided
that the following conditions are met:
– Redistributions of source code must retain the
above copyright notice, this list of conditions and
the following disclaimer.
– Redistributions in binary form must reproduce the
above copyright notice, this list of conditions and
the following disclaimer in the documentation and/
or other materials provided with the distribution.
– Neither the name of the Xiph.org Foundation
nor the names of its contributors may be used to
endorse or promote products derived from this
software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
• libvorbis
Copyright (c) 2002-2008 Xiph.org Foundation
Redistribution and use in source and binary forms,
with or without modification, are permitted provided
that the following conditions are met:
– Redistributions of source code must retain the
above copyright notice, this list of conditions and
the following disclaimer.
– Redistributions in binary form must reproduce the
above copyright notice, this list of conditions and
the following disclaimer in the documentation and/
or other materials provided with the distribution.
– Neither the name of the Xiph.org Foundation
nor the names of its contributors may be used to
endorse or promote products derived from this
software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
HOLDERS AND CONTRIBUTORS ``AS IS’’ AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
• libogg
Copyright (c) 2002, Xiph.org Foundation Redistribution
and use in source and binary forms, with or without
modification, are permitted provided that the
following conditions are met:
– Redistributions of source code must retain the
above copyright notice, this list of conditions and
the following disclaimer.
– Redistributions in binary form must reproduce the
above copyright notice, this list of conditions and
the following disclaimer in the documentation and/
or other materials provided with the distribution.
85English
Appendix
– Neither the name of the Xiph.org Foundation
nor the names of its contributors may be used to
endorse or promote products derived from this
software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
HOLDERS AND CONTRIBUTORS ``AS IS’’ AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
■ ילמשח דויצ לש הפשאל הכלשה רבדב עדימ
תונידמל יטנוולר( תוללוס ןכו ןשי ינורטקלאו
.)תדרפומ הפשא ףוסיא תכרעמב תושמתשמש
X םע הפשא חפ( ןומיסה םע תוללוסו םירצומ ךילשהל ןתינ אל
■ Eski Elektrik ve Elektronik Ekipmanların
İmha Edilmesi Hakkında Bilgi (ayrı atık
toplama sistemlerini kullanan ülkeleri
için uygulanabilir)
Sembollü (üzerinde çarpı işareti olan çöp kutusu)
ürünler ev atıkları olarak atılamaz.
Eski elektrik ve elektronik ekipmanlar, bu ürünleri
ve ürün atıklarını geri dönüştürebilecek bir tesiste
değerlendirilmelidir. Yaşadığınız bölgeye en yakın
geri dönüşüm tesisinin yerini öğrenmek için yerel
makamlara müracaat edin. Uygun geri dönüşüm ve atık
imha yöntemi sağlığımız ve çevremiz üzerindeki zararlı
etkileri önlerken kaynakların korunmasına da yardımcı
olacaktır.
86
■ For KW-M950BWM
Declaration of Conformity with regard to the
RE Directive 2014/53/EU
Declaration of Conformity with regard to the
RoHS Directive 2011/65/EU
Manufacturer:
JVC KENWOOD Corporation
3-12, Moriyacho, Kanagawa-ku, Yokohama-shi,
Kanagawa 221-0022, JAPAN
EU Representative:
JVCKENWOOD Europe B.V.
Amsterdamseweg 37, 1422 AC UITHOORN, THE
NETHERLANDS
English
Hereby, JVC KENWOOD declares that the radio equipment
KW-M950BWM is in compliance with Directive 2014/53/EU. The full
text of the EU declaration of conformity is available at the following
internet address:
Türkçe
Burada, JVC KENWOOD KW-M950BWM radyo ekipmanının 2014/53/
AB Direktifine uygun olduğunu bildirir. AB uyumluluk deklarasyonunun
tam metni aşağıdaki internet adresinde mevcuttur.
URL: http://www.jvc.net/cs/car/eudoc/
■ For Turkey
Bu ürün 28300 sayılı Resmi Gazete’de yayımlanan Atik Elektrikli ve
Elektronik Eşyalarin Kontrolü Yönetmeliğe uygun olarak üretilmiştir.
Appendix
87English
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.