JVC KD-AVX44 Instruction Manual

DVD/CD RECEIVER

DVD-/CD-RECEIVER RÉCEPTEUR DVD/CD DVD/CD-RECEIVER

KD-AVX44

For canceling the display demonstration, see page 7. Zum Abbrechen der Displaydemonstration siehe Seite 7. Pour annuler la démonstration des affichages, référez-vous à la page 7. Zie bladzijde 7 voor het annuleren van de displaydemonstratie.

ENGLISH

DEUTSCHFRANÇAIS

NEDERLANDS

For installation and connections, refer to the separate manual. Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch. Pour l’installation et les raccordements, se référer au manuel séparé. Bijzonderheden over de installatie en aansluiting van het apparaat vindt u in de desbetreffende handleiding.

INSTRUCTIONS

BEDIENUNGSANLEITUNG

MANUEL D’INSTRUCTIONS

GEBRUIKSAANWIJZING

LVT1797-003A

[E]

Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC

0984

English: Español:

Hereby, JVC, declares that this KD-AVX44 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/ EC.

Deutsch: Ελληνική:

Hiermit erklärt JVC, dass sich das Gerät KD-AVX44 in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/ EG befindet. (BMWi)

Hiermit erklärt JVC die Italiano: Übereinstimmung des Gerätes

KD-AVX44 mit den grundlegenden Anforderungen und den anderen relevanten Festlegungen der Richtlinie 1999/5/EG befindet. (Wien)

Français: Malti:

Par la présente JVC déclare que l’appareil KD-AVX44 est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.

Nederlands: Português:

Hierbij verklaart JVC dat het toestel KD-AVX44 in overeenstemming is

met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.

Dansk: Suomi:

Undertegnede JVC erklærer herved, at følgende udstyr KD-AVX44 overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.

Por medio de la presente JVC declara que el KD-AVX44 cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.

ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ JVC ΔΗΛΩΝΕΙ ΟΤΙ KD-AVX44 ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.

Con la presente JVC dichiara che questo KD-AVX44 è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.

Hawnhekk, JVC, jiddikjara li dan KD-AVX44 jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/ EC.

JVC declara que este KD-AVX44 está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE.

JVC vakuuttaa täten että KD-AVX44 tyyppinen laite on direktiivin 1999/5/ EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.

Svenska: Lietuviu:

Härmed intygar JVC att denna KD-AVX44 står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.

Íslenska: Magyar:

Hér með lýsir JVC yfir því að KD-AVX44 er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC.

Norsk: Polski:

JVC erklærer herved at utstyret KD-AVX44 er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF.

Cesky: Slovensko:

JVC tímto prohlašuje, že tento KD-AVX44 je ve shodě se základními požadavky a dalšími príslušnými ustanoveními směrnice 1999/5/ES.

Eesti: Slovensky:

Käesolevaga kinnitab JVC seadme KD-AVX44 vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.

Latviski:

Ar šo JVC deklarē, ka KD-AVX44 atbilst Direktīvas 1999/5/EK būtiskājam prasībām un citiem ar to saistītajiem noteikumiem.

Šiuo JVC deklaruoja, kad šis KD-AVX44 atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.

Alulírott, JVC nyilatkozom, hogy a KD-AVX44 megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.

Niniejszym JVC oświadcza, że KD-AVX44 jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.

JVC izjavlja, da je ta KD-AVX44 v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ ES.

JVC týmto vyhlasuje, že KD-AVX44 spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best

possible performance from the unit.

IMPORTANT FOR LASER PRODUCTS

ENGLISH

1. CLASS 1 LASER PRODUCT

2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel.

3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical instruments.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

WARNINGS:

This symbol is only valid in the European Union.

Information for Users on Disposal of Old Equipment

This symbol indicates that the product with this symbol should not be disposed as general household waste at its end-of-life. If you wish to dispose of this product, please do so in accordance with applicable national legislation or other rules in your country and municipality. By disposing of this product correctly, you will help to conserve natural resources and will help prevent potential negative effects on the environment and human health.

To prevent accidents and damage

• DO NOT install any unit or wire any cable in a location where;

– it may obstruct the steering wheel and

gearshift lever operations.

– it may obstruct the operation of safety devices

such as air bags.

– it may obstruct visibility.

• DO NOT operate the unit while driving.

If you need to operate the unit while driving, be

sure to look around carefully.

• The driver must not watch the monitor while driving.

• The driver must not put on the headphones while driving.

Cautions on the monitor:

• The monitor built in this unit has been produced with high precision, but it may have some ineffective dots. This is inevitable and is not malfunction.

• Do not expose the monitor to direct sunlight.

• When the temperature is very cold or very hot... – Chemical changes occur inside, causing

malfunction.

– Pictures may not appear clearly or may move

slowly. Pictures may not be synchronized with the sound or picture quality may decline in such environments.

For security reasons, a numbered ID card is provided with this unit, and the same ID number is imprinted on the unit’s chassis. Keep the card in a safe place, as it will help the authorities to identify your unit if stolen.

How to reset your unit

Contents

INTRODUCTION

Playable disc type ............................ 4

Before operations ............................ 5

ENGLISH

• Your preset adjustments (except for the registered

Bluetooth devices) will also be erased.

How to forcibly eject a disc

NO EJECT?

[Hold]

• If this does not work, reset the unit.

For safety...

• Do not raise the volume level too much, as this will block outside sounds, making driving dangerous.

• Stop the car before performing any complicated operations.

Temperature inside the car...

If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit.

EMERGENCY EJECT?

NO EJECT?

EMERGENCY EJECT?

OPERATIONS

Basic operations—AV menu ............. 6

Basic operations—Control panel ...... 8

Basic operations—

Remote controller (RM-RK252) ...... 10

Listening to the radio ...................... 12

Disc operations ................................ 18

Dual Zone operations ....................... 30

USB operations ................................ 33

Bluetooth® operations—

Cellular phone/audio player .......... 35

EXTERNAL DEVICES

Listening to the iPod ........................ 42

Listening to the CD changer .............. 45

Listening to the DAB tuner ............... 47

Listening to other external

components ................................. 50

SETTINGS

Sound equalization .......................... 52

Assigning titles to the sources .......... 53

Menu items ..................................... 54

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

REFERENCES

Maintenance ................................... 63

More about this unit ........................ 64

Troubleshooting .............................. 70

Specifications .................................. 74

Playable disc type

Disc type Recording format, file type, etc. Playable

DVD DVD Video (Region Code: 2)*

ENGLISH

DVD Audio

DVD-ROM

DVD Recordable/Rewritable (DVD-R/-RW*

, +R/+RW*3)

• DVD Video: UDF bridge

• DVD-VR

• DivX/MPEG1/MPEG2/JPEG/MP3/WMA/WAV/ AAC: Compliant to ISO 9660 level 1, level 2, Romeo, Joliet

DVD Video

DVD-VR

DivX/MPEG1/MPEG2

JPEG MP3/WMA/WAV/AAC*

MPEG4

DVD+VR

DVD-RAM

DualDisc DVD side

Non-DVD side

CD/VCD Audio CD/CD Text (CD-DA)/DTS-CD

VCD (Video CD)

SVCD (Super Video CD)

CD-ROM

CD-I (CD-I Ready)

CD Recordable/Rewritable (CD-R/-RW)

• Compliant to ISO 9660 level 1, level 2, Romeo, Joliet

CD-DA MP3/WMA/WAV/AAC*

JPEG

DivX/MPEG1/MPEG2

MPEG4

If you insert a DVD Video disc of an incorrect Region Code, “Region code error” appears on the monitor.

DVD-R recorded in multi-border format is also playable (except for dual layer discs).

DVD-RW dual layer discs are not playable.

It is possible to play back finalized +R/+RW (Video format only) discs.

+RW double layer discs are not playable.

This unit can play back AAC files encoded using iTunes.

Caution for DualDisc playback

The Non-DVD side of a “DualDisc” does not comply with the “Compact Disc Digital Audio” standard. Therefore, the use of Non-DVD side of a DualDisc on this product may not be recommended.

Before operations

ENGLISH

Touch pad controls

The lights of the touch pad controls and monitor are turned off when no operation is done for about 10 seconds. The lights are turned on in the following cases: – When you move your hand close

to the touch pad controls.*

– When your finger touches the

touch pad controls.*

– When you use the remote

controller. – When a call/SMS comes in. – When the source is automatically changed by

receiving the Traffic Announcement or a programme

searched by PTY search. – When the signal from the rear view camera comes in.

* Depending on the setting. To change the setting, ☞

page 59.

The lights are always turned on in the following cases: – While <AV Menu> is displayed. – While <Source Menu> is displayed. – While the control panel is open. – When <Illumination> is set to <Normal>. (☞

page 59)

Monitor

How to operate the unit by the touch pad controls

You can operate the unit by touching the appropriate part of the touch pad controls.

• To adjust the volume, move your finger on the touch pad knob as illustrated below to display the animation on the monitor, then press 5 or ∞ repeatedly. – You can also adjust the volume by just continuing

to move your finger on the touch pad knobs as illustrated below.

Vol+

Vol-

• When you slide your finger on the touch pad knob as illustrated below, it functions in the same way as touching 5 / ∞ / 4 / ¢.

VOL

• Operations are explained mainly using the touch pad controls and buttons of the unit; however, the buttons on the remote controller can work in the same way if they have the same names or marks.

• In the explanation, the screen names are highlighted. For example, <AV Menu>.

INTRODUCTION

Basic operations— AV menu

You can use the menus to set up various settings from <AV Menu>. For details of each menu and setting, see “Menu items.” (☞ pages 54 to 62)

ENGLISH

AV Menu

Enter

Setup

~ Turn on the power.

The lights of the touch pad controls and monitor are turned on.

Ÿ Enter <AV Menu>.

Time countdown indicator

AV Menu

Enter

Setup

Current selected icon name

• Non-available items will be shaded.

Setup icons

⁄ Select an item.

Sound

Fader/Balance Volume Adjust Subwoofer Level

High Pass Filter

Crossover

Through

Current setting of the selected item

@ Enter the next screen.

High Pass Filter

Through

Exit

• To return to the previous screen:

! Select an icon to enter the setup screen.

• Repeat steps ⁄ and @ to set the sub-item if

needed.

¤ Finish the procedure.

In this manual, English indications are used for purpose of explanation. You can select the indication language on the monitor. (☞ page 55)

Canceling the display demonstration and setting the clock

Return to <Setup> by touching 4

Setup

Display

Demonstration

repeatedly.

AV Menu

Enter

Setup

Display

Clock Disc Setup 1 Disc Setup 2 Tuner

Demonstration

Wall Paper Color Scroll Tag Display

Off

Exit

Setup

Clock

Time Set

Exit

Time Set

Exit

Display

Clock

Disc Setup 1 Disc Setup 2 Tuner

Time Set

Time Format OSD Clock Clock Adjust

0:00

Hours

18:00

Minutes

18:35

ENGLISH

OPERATIONS

Basic operations — Control panel

ENGLISH

1 Selects sources. “Tuner” = “DAB” = “Disc” = “USB”

or ”USB iPod” = “Changer,” ”iPod,” or ”External Input” = “Bluetooth” = “AV Input”

• You can also select sources by touching

5 / ∞ / 4 / ¢ after holding SRC for entering <Source Menu>.

2 • Ejects the disc.

• Tilts the control panel (☞ page 9).

3 • Enters or exits <AV Menu>.

• Activates Voice Dialling [Hold].

• While talking: Adjusts the built-in microphone

volume.

4 • “Tuner” and “DAB”: Searches for stations/

ensembles.

• “Disc,” “USB,” “USB iPod,” “Changer,” “iPod,” and

“Bluetooth”: Reverse skip/forward skip

• On menus:

– Enters the previous/next screen. – Selects items. 5 • Activates TA Standby Reception.

• Displays PTY preset list [Hold].

6 Adjusts the volume level. (☞ page 5)

7*2 • “Tuner”: Selects preset stations.

• “DAB”: Selects services.

• “Disc,” “USB,” and “Changer”: Selects titles/ folders.

• “USB iPod”: Selects the next/previous items.

• “iPod”: Enters the player’s menu and pauses playback.

• “Bluetooth”: Selects group/folder.

• On menus: Selects items.

8 • “Disc,” “USB,” “USB iPod,” and “Changer”: Starts

and pauses playback.

• “Bluetooth”: Starts playback.

• On menus: Enters the next screen or exits the

displayed screen.

9 Changes the display information. (☞ page 9) p • “Tuner” and “DAB”: Selects the bands.

• “Disc” and “USB”: Stops playback.

• “Bluetooth”: Pauses playback.

q • Turns on the power.

• Turns off the power [Hold].

• Attenuates the sound (when the power is on).

w Remote sensor e Resets the unit.

• Use only when the internal system malfunctions.

r Detaches the control panel (☞ page 9).

*1 You cannot select these sources if they are not ready. *2 By holding 5 / ∞, you can display the list accessible

for the selected source.

To attach the control panelTo tilt the control panel

Hold 0 until “Tilt” appears on the monitor then press the button repeatedly.

Changing the display information

Available display information varies among the playback sources.

Each time you touch DISP, the display changes to show the various information.

Ex.: When the playback source is a DVD video disc.

Playback picture screen (only for video sources)

ENGLISH

DVD

DIGITAL

MULTI

VIDEO

01 02 0:01:20

VIDEO

01 02 0:01:20

DIGITAL

MULTI

CHAP.RPT

15:45

CHAP.RPT

Back to the beginning

Source information screen

15:45

Playback picture and the source information screen

Navigation screen

• This screen is displayed when <Navigation> is selected for <AV Input>.

(☞ page 58)

OPERATIONS

Basic operations — Remote controller (RM-RK252)

Installing the battery

ENGLISH

Insert the batteries into the remote controller by matching the polarity (+ and –) correctly.

R03/LR03/AAA

Caution:

Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

If the range or effectiveness of the remote controller decreases, replace both batteries.

Before using the remote controller:

• Aim the remote controller directly at the remote sensor on the unit.

• DO NOT expose the remote sensor to bright light (direct sunlight or artificial lighting).

The unit is equipped with the steering wheel remote control function.

• See the Installation/Connection Manual (separate volume) for connection.

IMPORTANT:

When Dual Zone is activated (☞ page 30), the remote controller functions only for operating the DVD/CD player.

Main elements and features

1 • Turns on the power.

• Turns off the power [Hold].

• Attenuates the sound (when the power is on).

2 “Disc,” “USB,” and “USB iPod”: Reverse search 3 • Adjusts the volume level.

• Adjusts the volume level through the 2nd AUDIO

OUT plug (while holding SHIFT). (☞ page 30)

4 • Answers incoming calls.

• Enters <Redial> [Hold].

• You can enter

button then touching 6 on the unit.

5 • DVD/DivX 6: Displays the disc menu.

• VCD: Resumes PBC playback (☞ page 25).

• DVD-VR: Displays the Original Program screen.

<Dial Menu> by pressing the

6 • Enters numbers (while holding SHIFT). (☞ pages

14, 23 to 26, 40, and 48)

• Selects the preset phone number.

• “Tuner” and “DAB”: Selects the preset stations.

7 Displays the on-screen bar. 8 Functions with other buttons (see 3, 6, and ;) 9 Displays the display information. p “Tuner”:

• 5 / ∞: Selects preset stations.

• 4 / ¢: Searches for stations. – Auto Search – Manual Search [Hold] “DAB”:

• 5 / ∞: Selects services.

• 4 / ¢: Searches for ensembles. – Auto Search – Manual Search [Hold] “Disc” and “Changer”:

• 5 / ∞: – DVD: Selects the title. – DVD-VR: Selects the program/play list. – Other discs (except VCD/CD): Selects the

folders.

• 4 / ¢: – Reverse skip/forward skip – Reverse search/forward search [Hold] “USB”:

• 5 / ∞: Selects the folders.

• 4 / ¢: – Reverse skip/forward skip – Reverse search/forward search [Hold] “USB iPod”:

• 5 / ∞: Selects previous/next item.

• 4 / ¢: – Reverse skip/forward skip – Reverse search/forward search [Hold] “iPod”:

• ∞: Pauses or resumes playback.

• 5: Enters the main menu (then 5 / ∞ ¢ work as the menu selecting buttons).

/ 4 /

• 4 / ¢: – Reverse skip/forward skip – Reverse search/forward search [Hold] In menu selecting mode: – Selects an item. (Then, press ∞ to confirm the

selection.) – Skips 10 items at a time [Hold]. “Bluetooth”:

• 5 / ∞: Selects group/folder.

• 4 / ¢: – Reverse skip/forward skip – Reverse search/forward search [Hold]

q “Disc,” “USB,” and “USB iPod”: Forward search w Selects the source. e • “Disc,” “USB,” and “USB iPod”: Starts and pauses

playback.

• “Bluetooth”: Starts playback.

• Answers incoming calls.

r Changes the aspect ratio of the playback pictures. t • “Tuner” and “DAB”: Selects the bands.

• “Disc” and “USB”: Stops playback.

• “Bluetooth”: Pauses playback.

• Ends the call.

y VCD: Returns to the PBC menu. u • DVD Video/DivX 6: Displays the disc menu.

• VCD: Resumes PBC playback. (☞ page 25)

• DVD-VR: Displays the Play List screen. i • Makes selection/settings.

• @ / #: Skips back or forward by 5 minutes for

DivX/MPEG1/MPEG2.

• % / ﬁ: Changes discs for “Changer.”

o Activates or deactivates Dual Zone. ; • Changes the surround mode.*1 (☞ page 27)

• “Disc” and “USB”: Switches the number entry

mode (while holding SHIFT).

• Erases the misentry after entering a wrong

number (while holding SHIFT).

When Dual Zone is activated, these buttons cannot be

used.

*2 Functions as a number button only (see 6 ). *3 5 : Returns to the previous menu.

∞ : Confirms the selection.

ENGLISH

OPERATIONS

Listening to the radio

ENGLISH

A Band B Sound mode ( C Preset no. D Frequency E PS (station name) for FM RDS. If no signal is coming in,

“No Name” appears.

F PTY code for FM RDS G Tuner-related function indicators

☞ page 52)

TUNER

Bayern Radio

Pop Music

FLAT

FM1 P1 87.5 MHz

AFTP

~ Select “Tuner.” Ÿ Select the band.

! Search for a station—Auto Search.

• Manual Search: Hold either or until “Manual Search” appears on the monitor, then touch it repeatedly.

• The ST indicator lights up when receiving an FM stereo broadcast with sufficient signal strength.

15:45

When an FM stereo broadcast is hard to receive

AV Menu

FM station automatic presetting —SSM (Strong-station Sequential Memory)

This function works only for FM bands. You can preset six stations for each band.

ENGLISH

Enter

Mode

Mono

SSM PTy Standby

Off

Exit

Reception improves, but the stereo effect will be lost.

• The MO indicator lights up.

To restore the stereo effect, select <Off> in step 4.

Start

AV Menu

Mono

SSM

PTy Standby

Enter

Mode

Local FM stations with the strongest signals are searched and stored automatically in the FM band.

OPERATIONS

Manual presetting

Ex.: Storing the FM station of 92.5 MHz into preset

number 4 of the FM1 band.

ENGLISH

Tune in to a station you want to preset.

TUNER

FLAT

FM1 92.5 MHz

No Name

4 Select a preset number.

5 Store the station.

The Preset List can also be accessed through

<AV Menu> = <List>.

FM1

87.5

89.9

97.9

105.9

Enter

108.0

87.5

[Hold]

Store

The Preset List appears

• For FM: Each time you hold 5 / ∞ , you can

change the bands.

FM1

87.5

89.9

97.9

105.9

Enter

108.0

87.5

Store

15:45

FLAT

[Hold]

TUNER

FM1 P4 92.5 MHz

No Name

The station selected in step 2 is now stored in preset number 4.

15:45

Selecting preset stations

On the remote:

On the unit:

To select directly

To select from the Preset List

3 Select the preset number.

FM1

87.5

89.9

97.9

105.9

Enter

108.0

87.5

Store

[Hold]

• For FM: Each time you hold 5 / ∞ , you can

change the bands.

FM1

87.5

89.9

97.9

105.9

Enter

108.0

87.5

Store

The Preset List can also be accessed through

<AV Menu> = <List>.

The following features are available only for FM RDS stations.

Searching for FM RDS programme—PTY Search

You can search for your favorite programmes being broadcast by selecting the PTY code for your favorite programmes.

[Hold]

The available PTY codes appear (including six preset PTY codes).

2 Select a PTY code.

If there is a station broadcasting a programme of the same PTY code as you have selected, that station is tuned in.

PTy Search

Memory

Pop Music

Rock Music

Easy Listening

Serious Classics

Start

Current Affairs

Varied Speech

PTy Search

Memory

Cultures

Science

Varied Speech Pop Music

Start

Rock Music Eash Listening

FLAT

PTy Search

15:45

TUNER

FM1 XX.X MHz

Science

The frequency changes as search goes on.

Storing your favorite programme types

You can store your favorite PTY codes into the PTY Preset List.

1 Follow steps 1 and 2 in the left column to select

a PTY code you want to store.

PTy Search

Memory

Cultures

Science

Varied Speech Pop Music

Start

Rock Music Eash Listening

2 Enter <PTy Memory>.

PTy Memory

Pop Music

Rock Music

Easy Listening

Serious Classics

Store

Current Affairs

Varied Speech

The current PTY Preset List appears.

3 Select a listed code to be replaced with the one

newly selected.

PTy Memory

Pop Music

Rock Music

Easy Listening

Serious Classics

Store

Current Affairs

Varied Speech

4 Store the code.

Now the selected PTY code is replaced with the new one.

PTy Memory

Store

Pop Music

Rock Music

Easy Listening

Serious Classics

Science

Varied Speech

ENGLISH

Available PTY codes:

News, Current Affairs, Information, Sport, Education, Drama, Cultures, Science, Varied Speech, Pop Music, Rock Music, Easy Listening, Light Classics M, Serious Classics, Other Music, Weather & Metr, Finance, Children’s Progs, Social Affairs, Religion, Phone In, Travel & Touring, Leisure & Hobby, Jazz Music, Country Music, National Music, Oldies Music, Folk Music, Documentary

OPERATIONS

Activating/deactivating TA/PTY Standby Reception

TA Standby Reception Indicator

Touch T/P to activate.

ENGLISH

The unit will temporarily switch to Traffic Announcement (TA), if available, from any source other than AM. The volume changes to the preset TA volume level if the current level is lower than the preset level (☞ page

58).

Not yet activated. Tune in to another station providing the RDS signals.

Touch T/P to deactivate. Goes off

Lights up

Flashes

Activating PTY Standby Reception

Mode

PTy Standby

Select

AV Menu

Enter

Mode

Mono SSM

PTy Standby

Off

News

Exit

PTY Standby Reception Indicator

Enter <AV Menu> = <Mode> =

<PTy Standby> (☞ right column and

PTY

page 61).

The unit will temporarily switch to

Lights up your favorite PTY programme from any source other than AM.

Not yet activated. Tune in to another

Flashes station providing the RDS signals.

To deactivate, select <Off> in step

Goes off 4, then touch 6 once (☞ right column).

• When a DAB tuner is connected, TA Standby/PTY Standby Reception also works for the DAB tuner.

Select a PTY code for PTY Standby Reception.

PTy Standby

Drama Cultures

Science

Varied Speech

Exit

Pop Music

Tracing the same programme— Network-Tracking Reception

When driving in an area where FM reception is not sufficient enough, this unit automatically tunes in to another FM RDS station of the same network, possibly broadcasting the same programme with stronger signals.

Programme A broadcasting on different frequency areas (01 – 05)

When shipped from the factory, Network-Tracking Reception is activated. You can change the Network-Tracking Reception setting. ☞ <AF Regional> on page 58.

• When the DAB tuner is connected, refer also to “Tracing the same programme—Alternative Frequency Reception (DAB AF).” (☞ page 49)

Automatic station selection— Programme Search

Usually when you select preset stations, the preset station is tuned in. If the signals from the FM RDS preset station are not sufficient for good reception, this unit, using the AF data, tunes in to another frequency broadcasting the same programme as the original preset station is broadcasting. (☞ page 58)

• The unit takes some time to tune in to another station using Programme Search.

ENGLISH

OPERATIONS

Disc operations

The disc type is automatically detected, and playback starts automatically (for some discs: automatic start depends on its internal program).

ENGLISH

If a disc does not have any disc menu, all tracks in it will be played repeatedly until you change the source or eject the disc.

” appears on the monitor, the unit cannot accept the operation you have tried to do.

If “

• In some cases, without showing “ ,” operations will not be accepted.

~ Open the front panel.

Label side

Ÿ Insert the disc.

Playback starts automatically.

Caution:

Do not place your finger behind the control panel.

Caution on volume setting:

Discs and connected USB devices produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level.

0: Ejects the disc. 3/8: Starts and pauses playback.

BAND: Stops playback.

DISC

15:45

Now Reading...

DVD

DIGITAL

MULTI

VIDEO

01 02 0:01:20

CHAP.RPT

15:45

ENGLISH

4 ¢: Touch: Selects chapter.

Hold: Reverse/forward search

5 ∞: Selects title.

DISP:

4 ¢: Touch: Selects chapter.

Touch if necessary (☞ page 9).

Hold: Reverse/forward search

5 ∞: Selects program no./Play List no.

DISP:

Touch if necessary (☞ page 9).

A Disc type B Audio format C Sound/surround mode (

☞ pages 26 and 52)

D Title no./Chapter no./Playing time E Playback mode

DVD

DIGITAL

FLAT

VR-PRG

01 02 0:01:20

15:45

A Audio format B VR-PRG: Original program

VR-PL: Play List C Sound/surround mode (

☞ pages 26 and 52)

D Program no. (or Play List no.)/Chapter no./Playing time

DVD

FRONT 2CH

DivX

01 02 0:01:20

Current Folder Name Current File Name.avi

15:45

4 ¢: Touch: Selects track.

Hold: Reverse/forward search for

DivX/MPEG

5 ∞: Touch: Selects folder.

Hold: Displays Folder List.

DISP:

Touch if necessary (☞ page 9).

A Sound/surround mode (☞ pages 26 and 52) B For DivX/MPEG: Folder no./Track no./Playing time

For JPEG: Folder no./File no. C Current folder name/current file name

*1 Search speed: x2 ] x10 *2 Search speed: ¡1 ] ¡2

OPERATIONS

ENGLISH

VCD

02 0: 45: 38

PBC

FLAT

15:45

15: 45

02 0:01:20

4 ¢: Touch: Selects track.

Hold: Reverse/forward search

DISP:

Touch if necessary (☞ page 9)

4 ¢: Touch: Selects track.

Hold: Reverse/forward search

4 ¢: Touch: Selects track.

Hold: Reverse/forward search

5 ∞: Touch: Selects folder.

Hold: Displays Folder List.

A PBC indicator lights up when PBC is in use.

B Sound/surround mode ( C Track no./Playing time

Current Track Title Artist Name Disc Title

A Sound/surround mode (☞ pages 26 and 52)

B Track no./Playing time C Track title (only for CD Text)/Artist Name/Disc title

01 02 0:01:20

Current Folder Name Current File Name.mp3

A Audio format (MP3/WMA/WAV/AAC)

B Sound/surround mode ( C Folder no./Track no./Playing time D Current folder name/current file name

FLAT

MP3 FLAT

☞ pages 26 and 52)

15:45

02 0:01:20

15:45

RPT

☞ pages 26 and 52)

*1 Search speed: x2 ] x10 *2 “No Name” appears for conventional CDs. *3 Tag data will be shown instead of folder/file names

when they are recorded and <Tag Display> is set to <On>. (☞ page 54)

Selecting playback modes

You can use Repeat or Random playback mode.

Mode

Repeat

Random

Repeat

Set

Off

Track

Folder

Ex.: To select Track Repeat

AV Menu

Enter

Mode

When one of the playback modes is selected, the corresponding indicator lights up on the source information screen.

To cancel, select <Off> in step 4.

Disc type Repeat Random

Chapter: Repeats current chapter.

Title: Repeats current title.

Chapter: Repeats current chapter.

Program: Repeats current program (not available

for Playlist playback).

Track: Repeats current track (for VCD: PBC not

in use).

Disc (All): Randomly plays all tracks (for

VCD: PBC not in use).

Track: Repeats current track. Folder: Randomly plays all tracks of

current folder, then tracks of next folders.

Folder: Repeats all tracks of the current folder. Disc (All): Randomly plays all tracks.

Track: Repeats current track. Folder: Randomly plays all tracks of

current folder, then tracks of next folders.

Folder: Repeats all tracks of the current folder. Disc (All): Randomly plays all tracks.

Folder: Repeats all tracks of the current folder.

ENGLISH

—

OPERATIONS

Selecting tracks on the list

If a disc includes folders, you can display the Folder/ Track (File) Lists, then start playback.

1 Enter <Folder List>.

ENGLISH

2 Select a folder.

3 Select a file.

The Folder List can also be accessed through

<AV Menu> = <List>.

Folder List

My Best

Cinema Pops My Best2 Favorite Song

[Hold]

Cinema2

• Hold the button to display the next/previous folders.

Folder List

My Best Cinema Pops

My Best2

Favorite Song Cinema2

File List

Song011.mp3 Song012.mp3 Song013.mp3

Song014.mp3

Enter

Song015.mp3 Song016.mp3

Operations using the remote controller—RM-RK252

Prohibiting disc ejection

You can lock a disc in the loading slot.

~ Hold the buttons at the same time.

NO EJECT?

[Hold]

EMERGENCY EJECT?

Ÿ Activate the prohibition.

“No Eject” appears.

To cancel the prohibition, repeat the same procedure to select <EJECT OK?>.

Also functions as CLR (clear): Erases a misentry if pressed while holding SHIFT.

+ 53 hidden pages