For canceling the display demonstration, see page 5.
ENGLISH
DEUTSCH
NEDERLANDS
For installation and connections, refer to the separate manual.
INSTRUCTIONS
LVT1656-001A
[E]
Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best
possible performance from the unit.
IMPORTANT FOR LASER PRODUCTS
ENGLISH
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to
qualified service personnel.
3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical
instruments.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
WARNINGS:
This symbol is only valid in
the European Union.
Information for Users on Disposal of Old
Equipment
This symbol indicates that the product with
this symbol should not be disposed as general
household waste at its end-of-life. If you wish to
dispose of this product, please do so in accordance
with applicable national legislation or other rules in
your country and municipality. By disposing of this
product correctly, you will help to conserve natural
resources and will help prevent potential negative
effects on the environment and human health.
To prevent accidents and damage
• DO NOT install any unit and wire any cable in
locations where;
– it may obstruct the steering wheel and
gearshift lever operations.
– it may obstruct the operation of safety devices
such as air bags.
– it may obstruct visibility.
• DO NOT operate the unit while driving.
If you need to operate the unit while driving, be
sure to look around carefully.
• The driver must not watch the monitor while
driving.
Cautions on the monitor:
• The monitor built in this unit has been produced
with high precision, but it may have some
ineffective dots. This is inevitable and is not
malfunction.
• Do not expose the monitor to direct sunlight.
For security reasons, a numbered ID card is provided with this unit, and the same ID number is imprinted on the
unit’s chassis. Keep the card in a safe place, as it will help the authorities to identify your unit if stolen.
• When the temperature is very cold or very hot...
– Chemical changes occur inside, causing
malfunction.
– Pictures may not appear clearly or may move
slowly. Pictures may not be synchronized with
the sound or picture quality may decline in
such environments.
2
How to reset your unit
• Your preset adjustments (except for the registered
Bluetooth devices) will also be erased.
How to forcibly eject a disc
NO EJECT?
EMERGENCY EJECT?
NO EJECT?
EMERGENCY EJECT?
• If this does not work, reset the unit.
This product incorporates copyright protection
technology that is protected by U.S. patents and
other intellectual property rights. Use of this
copyright protection technology must be authorized
by Macrovision, and is intended for home and
other limited viewing uses only unless otherwise
authorized by Macrovision. Reverse engineering or
disassembly is prohibited.
• Do not raise the volume level too much, as this will
block outside sounds, making driving dangerous.
• Stop the car before performing any complicated
operations.
Temperature inside the car...
If you have parked the car for a long time in hot or cold
weather, wait until the temperature in the car becomes
normal before operating the unit.
3
Playable disc type
Disc typeRecording format, file type, etc.Playable
DVDDVD Video (Region Code: 2)*
ENGLISH
DVD Audio
DVD-ROM
DVD Recordable/Rewritable
2
(DVD-R*
/-RW, +R/+RW*3)
• Compliant to UDF bridge format
• DVD-RAM cannot be played.
DVD Video
DivX/MPEG1/MPEG2
JPEG
MP3/WMA/WAV
MPEG4
DVD-VR, +VR
Dual DiscDVD side
Non-DVD side
CD/VCDAudio CD/CD Text (CD-DA)
VCD (Video CD)
4
DTS-CD*
CD-ROM
CD-I (CD-I Ready)
CD Recordable/Rewritable
(CD-R/-RW)
• Compliant to ISO 9660 level 1,
level 2, Romeo, Joliet
CD-DA
MP3/WMA/WAV
JPEG
DivX/MPEG1/MPEG2
MPEG4
*1 If you insert a DVD Video disc of an incorrect Region Code, “Region code error” appears on the monitor.
*2 DVD-R recorded in multi-border format is also playable (except for dual layer discs).
*3 It is possible to play back finalized +R/+RW (Video format only) discs. However, the use of +R double layer disc is
not recommended.
*4 To reproduce DTS sound, use the digital connection. (☞ Installation/Connection Manual)
• “DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation registered in the US, Japan and other
countries.
1
Caution for DualDisc playback
The Non-DVD side of a “DualDisc” does not comply
with the “Compact Disc Digital Audio” standard.
Therefore, the use of Non-DVD side of a DualDisc on
this product may not be recommended.
Notes on reproduced sound (☞ page 53)
Through the analog terminals (Speaker out/LINE
OUT) of this unit...
• Multi-channel signals are downmixed.
• DTS sound cannot be reproduced.
4
Before operating the unit
Cancel the display demonstration and set the clock. (☞ also pages 40 and 41)
Indication language: In this manual, English indications are used for purpose of explanation. You
can select the indication language on the monitor. (☞ page 41)
Setup menu icon
AV Menu
ENT
Setup
Currently selected menu
Enter
~ Turn on the power.
Ÿ Display <AV Menu>.
! Enter the <Setup> menu.
⁄ Select <Display> ] <Demonstration>, then activate the <Demonstration> screen.
SetupDisplayDemonstration
Display
Clock
Disc Setup 1
Disc Setup 2
Tuner
Demonstration
Currently selected submenuCurrent setting
On
Demonstration
Wall Paper
Scroll
Tag Display
Dimmer
Off
On
ENT
Exit
ENGLISH
@ Cancel the display demonstrations.
Select <Off>.
Demonstration
Off
On
ENT
Exit
Continued on the next page
5
INTRODUCTION
ENGLISH
(twice)
Clock
0:00
Time Set
12Hours/24Hours
OSD Clock
Clock Adjust
¤ Return to the <Setup> menu.
# Select <Clock> ]<Time Set>, then
activate the <Time Set> screen.
‹ Set the clock time.
Time Set
Hours
18 : 00
ENT
Exit
Time Set
Minutes
18 : 35
ENT
Exit
$ Return to the <Clock> menu.
› Select <12Hours/24Hours>.
% Activate the <12Hours/24Hours>
screen.
fi Select either the 12-hour or 24-hour
system.
12Hours/24Hours
12 Hours
24 Hours
ENT
Exit
^ Return to the <Clock> menu.
fl Select <Clock Adjust>.
& Activate the <Clock Adjust> screen.
‡ Select the <Clock Adjust> setting.
• Off: Cancels.
• Auto: Activate auto clock adjustment using
the clock time (CT) data from an FM RDS
station.
* Finish the procedure.
TUNER
FM1
Bayern Radio
87.5 MHz
To display the clock time while playing back a
video source, select <Clock> =<OSD Clock> =<On>.
6
FLAT
AF
DX
18: 35
Basic operations — Control panel
• Turn on the power.
• Turn off the power [Hold].
• Attenuate the sound (if the
power is on).
Change the aspect ratio.
Change the display information.
Adjust the
volume.
• Eject the disc.
• Change the control
panel tilt (Tilt1 – Tilt4)
[Hold, then press].
4 / ¢
• TUNER/DAB: Search for
stations/ensembles.
• DISC: Select chapters/tracks.
• On menus: Go to next/previous
step.
• iPod/D.PLAYER: Select tracks.
• Bluetooth Audio: Reverse skip/
forward skip
3
5 / ∞*
• TUNER: Select preset stations.
• DAB: Select services.
• DISC: Select titles/folders.
• On menus: Select items.
• iPod/D.PLAYER: Enter player’s
menu/pause or stop playback.
• Bluetooth Phone/Bluetooth
Audio: Select a device.
Select the source.
TUNER = DAB = DISC (DVD/VCD/CD) =CD-CH, iPod,
D.PLAYER, or EXT-IN = Bluetooth Phone =
Bluetooth Audio = AV-IN =(back to the beginning)
• You cannot select these sources if they are not ready.
Display or erase
<AV Menu>*
Remote sensor
• DISC: Start playback.
• On menus: Enter.
• TUNER/DAB: Select the bands.
• DISC: Stop playback.
• On menus: Back.
1
<AV Menu> screens
*
You can use the menus to set up various settings.
The <AV Menu> screen consists of the following sub-menus—
Setup/Equalizer/Sound/Mode/List/Bluetooth.
• For details, see pages 39 to 48.
*2 To attach the control panel
*3 By holding 5 / ∞, you can display the list accessible for the
selected source.
7
Activate TA Standby Reception.
1
.
Show PTY preset list [Hold].
Display window
Reset the unit.
• Use only when the internal
system malfunctions.
Detach the control panel*2.
OPERATIONS
ENGLISH
Basic operations — Remote controller (RM-RK241)
Installing the lithium coin battery (CR2025)
ENGLISH
If the range of effectiveness of the remote controller
decreases, replace the battery.
Before using the remote controller:
• Aim the remote controller directly at the remote
sensor on the unit.
• DO NOT expose the remote sensor to bright light
(direct sunlight or artificial lighting).
The unit is equipped with the steering wheel
remote control function.
• See the Installation/Connection Manual (separate
volume) for connection.
Warning:
To prevent accidents and damage
• Do not install any battery other than CR2025 or
its equivalent.
• Store the battery in a place where children
cannot reach.
• Do not recharge, short, disassemble, or heat the
battery or dispose of it in a fire.
• Do not leave the battery with other metallic
materials.
• Do not poke the battery with tweezers or similar
tools.
• Wrap the battery with tape and insulate when
throwing away or saving it.
Main elements and features
EXTRA MONITOR
MODEMENU
ASPECT
DVD / RECEIVER
ATT
SOURCE
BAND
DUAL
VOL
2nd VOL
SHIFT
EXTRA MONITOR
1Monitor control buttons
• Used for a JVC monitor—KV-MR9010, or KVMH6510.
DVD/RECEIVER
2• Turns on the power.
• Attenuates the sound if the power is on.
• Turns off the power if pressed and held (while
the power is on).
3 Selects the source.
4 Selects the TUNER/DAB bands.
5 Changes the aspect ratio of the playback
pictures.
6 Not used for this unit.
7 Adjusts the volume level.
• Not used as 2nd VOL button for this unit.
8*1 • DVD/DivX 6: Shows the disc menu.
• VCD: Resumes PBC playback (☞ page 21).
9*1 Not used as SETUP button for this unit.
p SHIFT button
ZOOM
ASPECT
123
+
DISC
456
ENTER
7809
–
DISC
SETUP
DIRECT
OSD
MENUTOP M
RETURN
SURROUND
8
q7 (stop)*2, 3 (play)*3, 8 (pause)
• 3 (play) also functions as ZOOM button when
pressed with SHIFT button (☞ page 22).
• Not applicable for CD changer operations.
wFor advanced disc operations:
• 5 / ∞
DVD: Selects the titles.
Other discs except VCD/CD: Selects the folders.
*2 Ends the call for Bluetooth phone operations. (☞
page 28)
*3 Answers the incoming call for Bluetooth phone
operations. (☞ page 28)
*4 5 : Returns to the previous menu.
∞ : Confirms the selection.
*5 Not used as SURROUND button for this unit.
ENGLISH
9
OPERATIONS
Listening to the radio
POWER]ON
Preset No.Band
PS (station name) for FM RDS. If no signal is
coming in, “No Name” appears.
ENGLISH
FLAT
Pop M
DXMOAFTP
15: 45
PTY code for FM RDS
~
Select “TUNER.”
TUNER
FM1 Preset1
Bayern Radio
87.5 MHz
Tuner/Standby
Reception indicators
Ÿ Select the bands.
! Search for a station—Auto Search.
• Manual Search: Hold either 4 or ¢ until “Manual Search” appears on the display, then press it
repeatedly.
• The ST indicator lights up when receiving an FM stereo broadcast with sufficient signal strength.
When an FM stereo broadcast is
hard to receive
1
AV Menu
4
Mono
Off
On
☞ page 37
ENT
Exit
Setup
2
AV Menu
Mode
Mode menu icon
3
Mode
Off
Mono
DX/Local
SSM
PTy Standby
Reception improves, but stereo effect will be lost.
ENT
Enter
• The MO indicator lights up.
To restore stereo effect, select <Off> in step 4.
ENT
Enter
10
Tuning in to stations with
sufficient signal strength
This function works only for FM bands.
Once you have activated this function (selected
<Local>), it always works when searching for FM
stations.
1
AV Menu
Setup
ENT
Enter
2
AV Menu
Mode
Mode menu icon
3
4
Mode
DX
DX/Local
Mono
DX/Local
SSM
PTy Standby
DX
Local
Only stations with sufficient signal strength will be
detected.
• The DX indicator goes off, then the LO indicator
lights up.
ENT
Enter
ENT
Exit
FM station automatic presetting
—SSM (Strong-station
Sequential Memory)
This function works only for FM bands.
You can preset six stations for each band.
1
AV Menu
Setup
ENT
Enter
2
AV Menu
Mode
ENT
Enter
Mode menu icon
3
Mode
Mono
DX/Local
SSM
PTy Standby
ENT
Start
Local FM stations with the strongest signals are
searched and stored automatically in the FM band.
Manual presetting
Ex.: Storing FM station of 92.5 MHz into preset
number 4 of the FM1 band.
1
2 Tune in to a station you want to preset.
No Name
92.5 MHz
3
FM1Store
1
87.5
2
89.9
3
97.9
4
105.9
5
108.0
6
107.9
Preset list appears.*
4 Select a preset number.
FM1Store
1
87.5
2
89.9
3
97.9
4
105.9
5
108.0
6
107.9
5
The station selected in step 2 is now stored in
preset number 4.
* Each time you hold the button, you can change
the FM bands.
• Preset List can also be accessed through <AV
Menu> = <List>. (☞ page 12)
TUNER
FM1 Preset4
No Name
92.5 MHz
ENT
ENT
ENT
ENT
ENGLISH
11
OPERATIONS
Selecting preset stations
On the remote:
1
The following features are available only for FM RDS
stations.
ENGLISH
2
SHIFT
123
+
DISC
456
ENTER
or
On the unit:
or
1
FM1Store
• Each time you hold the button,
you can change the FM bands.
2
FM1Store
1
87.5
2
89.9
3
97.9
4
92.5
5
108.0
6
107.9
• Preset List can also be accessed through <AV
Menu> = <List>.
AV Menu
Setup
AV Menu
List
ENT
ENT
List menu icon
Searching for FM RDS
MENUTOP M
1
87.5
2
89.9
3
97.9
4
92.5
5
108.0
6
107.9
ENT
ENT
Enter
Enter
programme—PTY Search
You can search for your favorite programmes being
broadcast by selecting the PTY code for your favorite
programmes.
1
Available PTY codes appear (including six preset
PTY codes).
2 Select a PTY code.
ENT
ENT
3
If there is a station broadcasting a programme
of the same PTY code as you have selected, that
station is tuned in.
Available PTY codes:
News, Current Affairs, Information, Sport,
Education, Drama, Cultures, Science, Varied Speech,
Pop Music, Rock Music, Easy Listening, Light Classics
M, Serious Classics, Other Music, Weather & Metr,
Finance, Children’s Progs, Social Affairs, Religion,
Phone In, Travel & Touring, Leisure & Hobby, Jazz
Music, Country Music, National Music, Oldies Music,
Folk Music, Documentary
PTy Search
1
Pop Music
2
Rock Music
3
Easy Listening
4
Serious Classics
5
Current Affairs
6
Varied Speech
PTy Search
Cultures
Science
Varied Speech
Pop Music
Rock Music
Easy Listening
TUNER
FM1
PTy Search
XX.X MHz
Frequency changes as search goes on.
FLAT
Science
DXAF
ENT
ENT
15: 45
12
Storing your favorite programme types
You can store your favorite PTY codes into the PTY
Preset List.
1
PTy Search
1
Pop Music
2
Rock Music
3
Easy Listening
4
Serious Classics
5
Current Affairs
6
Varied Speech
ENT
Available PTY codes appear (including six preset
PTY codes).
2 Select a PTY code to store into the List.
PTy Search
Cultures
Science
Varied Speech
Pop Music
Rock Music
Easy Listening
ENT
Activating/deactivating TA/PTY
Standby Reception
TA Standby ReceptionIndicator
Press
The unit will temporarily switch to
Traffic Announcement (TA), if available,
from any source other than AM.
The volume changes to the preset TA
volume level if the current level is lower
than the preset level (☞ page 43).
Not yet activated. Tune in to another
station providing the RDS signals.
Press
to activate.TP
Lights up
Flashes
to deactivate.Goes off
ENGLISH
Current PTY Preset List is shown on the display.
PTy Memory
1
Pop Music
2
Rock Music
3
Easy Listening
4
Serious Classics
5
Current Affairs
6
Varied Speech
ENT
3 Select a listed code to be replaced with the
one newly selected.
PTy Memory
1
Pop Music
2
Rock Music
3
Easy Listening
4
Serious Classics
5
Current Affairs
6
Varied Speech
Now <Current Affairs> is replaced with
<Science>.
ENT
PTY Standby ReceptionIndicator
Activate <AV Menu>, then select
<Mode>, <PTy Standby> (☞
PTY
pages 14, 46).
The unit will temporarily switch to
Lights up
your favorite PTY programme from any
source other than AM.
Not yet activated. Tune in to another
Flashes
station providing the RDS signals.
To deactivate, select <Off> in step 4,
Goes off
then press ENT once (☞ page 14).
• When a DAB tuner is connected, TA Standby/PTY
Standby Reception also works for the DAB tuner and
searches for the services.
13
OPERATIONS
Activating PTY Standby Reception
1
ENGLISH
2
AV Menu
Setup
AV Menu
Tracing the same programme—
Network-Tracking Reception
When driving in an area where FM reception is not
ENT
Enter
sufficient enough, this unit automatically tunes in to
another FM RDS station of the same network, possibly
broadcasting the same programme with stronger
signals.
Mode
ENT
Enter
Mode menu icon
3
4
5
Select a PTY code for PTY Standby Reception.
Mode
Off
PTy Standby
PTy Standby
Drama
Cultures
Science
Varied Speech
Pop Music
Mono
DX/Local
SSM
PTy Standby
Off
News
ENT
Exit
Programme A broadcasting on different frequency
areas (01 – 05)
A
When shipped from the factory, Network-Tracking
Reception is activated.
To change the Network-Tracking Reception
setting, see <AF Regional> on page 43.
• When the DAB tuner is connected, refer also to
“Tracing the same programme—Alternative
Frequency Reception (DAB AF).” (☞ page 34)
Automatic station selection—
Programme Search
Usually when you select preset stations, the preset
station is tuned in.
If the signals from the FM RDS preset station are not
sufficient for good reception, this unit, using the AF
data, tunes in to another frequency broadcasting the
same programme as the original preset station is
broadcasting. (☞ page 43)
• The unit takes some time to tune in to another
station using programme search.
14
Disc operations
The disc type is automatically detected, and playback starts automatically (for some discs: automatic start depends
on its internal program).
If a disc does not have any disc menu, all tracks in it will be played repeatedly until you change the source or eject the
disc.
” appears on the monitor, the unit cannot accept the operation you have tried to do.
If “
• In some cases, without showing “ ,” operations will not be accepted.
Insert the disc.
Playback starts automatically.
Label side
Caution:
Do not place your finger behind the
control panel.
Caution on volume setting:
Discs produce very little noise compared
with other sources. Lower the volume
before playing a disc to avoid damaging
the speakers by the sudden increase of the
output level.
ENGLISH
DISP: Press if no playback picture appears, but disc
information (
0: Eject the disc.3: Start playback if necessary.
☞ pages 16 and 17) screen is displayed.
DISC
Now Reading ...
7: Stop playback.
15
15: 45
OPERATIONS
While playing the following discs, press .
• Each time you press the button, playback picture and disc information screens appear alternately.
• For discs except DVD and VCD: The control screen appears on the connected external monitor. (☞ page 51)
*1 Search speed: x2 ] x10.
*2 Search speed: ¡1 ]¡2.
*3 “No Name” appears for conventional CDs.
*4 Tag data will be shown instead of folder/file names when they are recorded and <Tag Display> is set to <On>. (☞ page
40)
ENGLISH
• DivX, DivX Ultra Certified, and associated logos are trademarks of DivX, inc. and are used under license.
• Official DivX® Ultra Certified product
• Plays all versions of DivX® video (including DivX® 6) with enhanced playback of DivX® media files and the DivX®
Media Format
• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
17
OPERATIONS
Selecting playback modes
You can use only one of the following playback
modes—Intro/Repeat/Random.
Ex. To select Track Repeat
1
ENGLISH
AV Menu
3
Mode
Off
All Off
Intro
Repeat
Random
ENT
ENT
2
Setup
AV Menu
Mode
Mode menu icon
Enter
Enter
4
Repeat
Off
Track
Folder
ENT
Set
When one of the playback modes is selected,
the corresponding indicator lights up on the disc
information screen.
To cancel, select <All Off> in step 3 or <Off> in
step 4.
Disc typeIntroRepeatRandom
Chapter: Repeats current
—
chapter
Title: Repeats current title
Track: Plays the first 15
seconds of each track (for
Track: Repeats current track
(for VCD: PBC not in use)
Disc: Randomly plays all tracks
(for VCD: PBC not in use)
VCD: PBC not in use)
Track: Plays the first 15
seconds of each track
Folder: Plays the first 15
seconds of the first track of
Track: Repeats current track
Folder: Repeats all tracks of
the current folder
Folder: Randomly plays all
tracks of current folder,
then tracks of next folders
Disc: Randomly plays all tracks
each folder
Track: Repeats current track
—
Folder: Repeats current folder
—
—
—
Folder: Repeats current folder
18
—
Loading...
+ 42 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.