JVC KD-AV7010 Instruction Manual

Download

Page 1

DVD RECEIVER WITH MONITOR

RECEPTOR DVD CON MONITOR RECEPTEUR DVD ET MONITEUR

ENGLISH

KD-AV7010

MAIN SUB

ATT

ZOOM

Detachable

•This unit is equipped with the display demonstration. To cancel it, see page 14.

• Esta unidad está equipada con demostración en la pantalla. Para cancelarla, consulte la página 14.

• Cet appareil est équipé d’une fonction de démonstration des affichages. Pour l’annuler, référezvous à la page 14.

For installation and connections, refer to the separate manual. Para la instalación y las conexiones, refiérase al manual separado. Pour l’installation et les raccordements, se référer au manuel séparé.

DUAL

AVOUT VOL

ASPECT

TOPMENU

GUI

RETURN

SET UP

TUNER

DISCOKAV

231

564

11/012

/+1

VOLUME

ESPAÑOL

FRANÇAIS

INSTRUCTIONS

MANUAL DE INSTRUCCIONES

MANUEL D’INSTRUCTIONS

For customer Use:

Enter below the Model No. and Serial No. which are located on the top or bottom of the cabinet. Retain this information for future reference.

Model No.

Serial No.

LVT1369-001A

[J]

Page 2

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and

to obtain the best possible performance from the unit.

INFORMATION (For U.S.A.)

This equipment has been tested and found to comply with the limits for a Class B digital

ENGLISH

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

– Consult the dealer or an experienced radio/TV technician for help.

After installing the unit, reset it using the following procedure:

How to reset your unit

Detach the control panel (see page 85), then press the reset button on the main unit using a ball-point pen or a similar tool. This will reset the built-in microcomputer.

Your preset adjustments—such as preset channels or sound adjustments—will also be erased.

• The monitor will go into its place if opened.

For safety....

• Do not raise the volume level too much, as this will block outside sounds, making driving dangerous.

• Stop the car before performing any complicated operations.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel.

3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam.

CAUTIONS:

• Do not insert any disc of unusual shape— like a heart or flower; otherwise, it will cause a malfunction.

• Do not expose discs to direct sunlight or any heat source or place them in a place subject to high temperature and humidity. Do not leave them in a car.

Temperature inside the car....

If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit.

Page 3

WARNINGS

• DO NOT install any unit in locations where; – it may obstruct the steering wheel and

gearshift lever operations, as this may result in a traffic accident.

– it may obstruct the operation of safety

devices such as air bags, as this may result in a fatal accident.

– it may obstruct visibility.

• DO NOT operate any unit while manipulating the steering wheel, as this may result in a traffic accident.

• The driver must not watch the monitor while driving. If the driver watches the monitor while driving, it may lead to carelessness and cause an accident.

• If you need to operate the main unit while driving, be sure to look ahead carefully or you may be involved in a traffic accident.

• If the parking brake is not engaged, “DRIVER MUST NOT WATCH THE MONITOR WHILE DRIVING.” appears on the monitor, and no playback picture will be shown. – This warning appears only when the

parking brake wire is connected to the parking brake system built in the car (refer to the Installation/Connection Manual).

CAUTIONS on the monitor

• This product has a fluorescent lamp that contains a small amount of mercury. It also contains lead in some components. Disposal of these materials may be regulated in your community due to environmental considerations. For disposal or recycling information please contact your local authorities, or the Electronic Industries Alliance: http://www.eiae.org./

•The monitor built in this receiver has been produced with high precision, but it may have some ineffective dots. This is inevitable and is not malfunction.

• Do not expose the monitor to direct sunlight.

•When the temperature is very cold or very hot... – Chemical changes occur inside, causing it

to malfunction.

– Pictures may not appear clearly or may

move slowly. Pictures may not be synchronized with the sound or the picture quality may decline in such environments.

ENGLISH

CAUTION on Volume Setting:

Discs produce very little noise compared with other sources. If the volume level is adjusted for the tuner, for example, the speakers may be damaged by the sudden increase in the output level. Therefore, lower the volume before playing a disc and adjust it as required during playback.

Important!

How to read this manual:

• Operations are explained only with the illustrations as follows:

To make the explanations as simple and easy-to-understand as possible, we have adapted the following methods:

Press briefly.

• Some related tips and notes are

explained later in the sections “More

Press repeatedly.

about This Receiver” (see page 74), but not in the same section explaining the operations. If you want to know more

Press either one.

about the functions, or if you have a doubt about the function, go to the section and you will find the answers.

Hold

Press and hold until your desired response begins.

Page 4

Contents

How to reset your unit ..................................... 2

Important! (How to read this manual) ............. 3

ENGLISH

Introduction—Playable Discs ....................... 5

Quick Guide—How to Use the Controls...... 6

Remote controller ............................................ 6

Main unit (front) .............................................. 8

Preparation

(Remote Controller—RM-RK220) .............. 9

Operation Methods ...................................... 10

Basic Operations .......................................... 12

Setting the clock ............................................ 13

Changing the source ...................................... 14

Changing the graphic screen ......................... 14

Changing the touch panel color ..................... 14

Displaying the level meter ............................. 15

Radio Operations ......................................... 16

Listening to the Radio ................................. 17

Storing stations in memory ............................ 18

Displaying the preset list ............................... 19

DVD/VCD Operations ................................. 20

CD/MP3 Operations .................................... 21

Basic Disc Operations ................................. 22

Changing the aspect ratio .............................. 24

Prohibiting disc ejection ................................ 24

Selecting MP3 folders ................................... 24

Operating the disc menu ................................ 25

Replaying the previous scenes ....................... 26

Zooming in .................................................... 26

Selecting subtitles .......................................... 27

Selecting audio languages ............................. 27

Selecting multi-angle views .......................... 28

Locating a folder/track using the list ............. 29

Displaying the disc text information ............. 30

Displaying the time information .................... 30

Selecting playback modes ............................. 30

Searching for scenes or songs ........................ 31

Dual Mode Operations ................................ 33

Selecting the sources ..................................... 33

Adjusting AV OUTPUT volume.................... 34

Surround Mode Operations........................ 35

Introducing surround/DSP mode ................... 36

Turning on and off the surround/DSP mode .... 37

Sound Modes (iEQ) Operations ................. 39

Selecting preset sound modes ........................ 40

Storing your own sound modes ..................... 40

Other Sound Adjustments .......................... 41

Monitor Adjustments .................................. 42

Initial Setup—DVD MENU ........................ 43

Initial Setup—MONITOR .......................... 45

Initial Setup—ON SCREEN ....................... 47

Initial Setup—AUDIO MENU/PSM .......... 49

Other Main Functions ................................. 53

Assigning titles to the sources ....................... 53

Changing the monitor position/angle ............ 55

Removing the monitor ................................... 55

CD Changer Operations ............................. 56

Basic CD Changer Operations ................... 57

Advanced CD Changer Operations ........... 58

Selecting disc/folders/tracks .......................... 58

Locating a disc/folder/track using the list ..... 58

Displaying the disc text information ............. 59

Selecting playback modes ............................. 60

Searching for songs ....................................... 61

External Component Operations ............... 62

TV Tuner Operations .................................. 63

Watching TV programs ................................. 64

Storing stations in memory ............................ 64

Displaying the preset list ............................... 66

SIRIUS Listening to the SIRIUS

Displaying the text information ..................... 69

Storing user channels in memory .................. 70

Listening to a user preset channel ................. 70

Selecting a category/channel using the

Skipping channels .......................................... 71

Changing the initial satellite condition .......... 72

Maintenance ................................................. 73

More about This Receiver........................... 74

Troubleshooting ........................................... 79

Additional Information ............................... 82

Specifications................................................ 84

Radio Operations ........................ 67

lists .......................................................... 71

Radio ................. 69

Page 5

Introduction—Playable Discs

Discs you can play

You can play back the following discs on this unit:

• DVD Video: whose video format is NTSC

and whose region code is “1.” –DVD-Rs and DVD-RWs recorded in

the DVD-Video format can also be played (see page 75).

• Video CD (VCD)/Audio CD

• MP3: CD-Rs or CD-RWs including MP3

files with the file extension code <mp3>. They must be recorded in the format compliant with ISO 9660 Level 1, ISO 9660 Level 2, Romeo, and Joliet.

On some discs, the actual operations may be different from what is explained in this manual.

The following discs cannot be played back

DVD Audio, DVD-ROM, DVD-RAM, DVD-RW recorded in the DVD-VR format, CD-ROM, CD-I (CD-I Ready), Photo CD, etc.

• Playing back these discs will generate noise and damage the speakers.

* Note on Region Code

DVD players and DVD Video discs have their own Region Code numbers. This unit can only play back DVD discs whose Region Code numbers include “1.”

Examples:

If you insert a DVD Video disc of an incorrect Region Code

“REGION CODE ERROR!” appears on the monitor.

Digital audio formats

The System can play back the following digital audio formats.

Linear PCM: Uncompressed digital audio, the same format used for CDs and most studio masters.

Dolby Digital *: Compressed digital audio, developed by Dolby Laboratories, which enables multi-channel encode to create the realistic surround sound.

DTS ** (Digital Theater Systems):

Compressed digital audio, developed by Digital Theater Systems, Inc., which enables multichannel like Dolby Digital. As the compression ratio is lower than for Dolby Digital, it provides wider dynamic range and better separation.

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

* Manufactured under license from Dolby

Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories.

** “DTS” and “DTS Digital Surround” are

registered trademarks of Digital Theater Systems, Inc.

ENGLISH

•“DVD Logo” is a trademark of DVD Format/ Logo Licensing Corporation registered in the US, Japan and other countries.

Page 6

Quick Guide—How to Use the Controls

○○○○○○○○○

Remote controller

ENGLISH

AT T

ASPECT

GUI

SET UP

TUNER

MAIN SUB

ZOOM

DUAL

AVOUT VOL

TOPMENU

RETURN

DISCOKAV

231

564

11/012

VOLUME

/+1

General operations

Buttons To do:

AT T

TUNER

DISC

VOLUME

MAIN SUB

ZOOM

DUAL

AVOUT VOL

ASPECT

GUI

SET UP

Tu rn on the main unit.

Tu rn off the main unit.

Attenuate sounds.

Select the band.

Select “TUNER” and “SIRIUS.”

Select “DISC” and “CD-CH.”

Select external components: TV = AV1 = AV2 =

Adjust the volume.

Set the main or suboperation for Dual Mode. *

Tu rn on/off Dual Mode.

Adjust the monitor angle (with MAIN/SUB set to MAIN).

Adjust the AV output level (with MAIN/SUB set to SUB).

Change the aspect ratio.

Display the monitor adjustment screen.

Display and erase GUI screen.

Display Setup Menus.

Change menu items.

Confirm.

*1When using Dual Mode, the remote

controller operates either main or sub source depending on the MAIN/SUB setting.

Only for MP3

* *3While playing a DVD, chapter is

selected; on the other hands, title is selected before or after playback.

Tuner operations

Buttons To do:

TUNER

231

564

: functions if pressed and held.

Select the band.

Start Auto Search.

Start Manual Search.

Change preset numbers.

Select preset numbers directly.

Page 7

Disc operations

Buttons To do:

Play.

Pause.

Stop.

Select chapters/tracks.

Search.

CD changer operations

Buttons To do:

Select folders. *

Select tracks.

Search.

Change discs.

ENGLISH

then

ZOOM

DUAL

RETURN

231

564

897

11/012

TOPMENU

/+1

Selects folders. *

Select tracks. *

Search.

Select audio language.

Select subtitle language.

Select view angle.

Zoom the picture.

Display disc menu.

Change menu items.

Confirm.

Return to the previous screen while operating the disc menu.

Select title/chapter/track number. *

231

564

897

11/012

Select disc numbers.

/+1

TV tuner operations

Buttons To do:

Start Auto Search.

Start Manual Search.

Change preset channel numbers.

231

564

897

11/012

Select preset channel numbers.

/+1

SIRIUS ® radio operations

Buttons To do:

TUNER

231

564

Select the band.

Change preset channel numbers.

Select channels.

Change the channel numbers rapidly.

Select categories.

Select preset channel numbers directly.

Page 8

○○○○○○○○○○○○○○○○○○

Main unit (front)

General operations

Buttons To do:

ENGLISH

Tuner operations

Buttons To do:

Tu rn on the main unit.

Tu rn off the main unit.

Attenuate sounds.

Change the sources. (The power will turn on automatically, if it was off.)

Adjust the volume.

Change the display information.

Detach the control panel.

Select the band.

Start Auto Search.

Start Manual Search.

Change FM reception mode.

CD changer operations

Buttons To do:

Select tracks.

Search.

then

(once): Display “DISC” = select discs.

(twice): Display “FOLDER” = select folders.*

TV tuner operations

Buttons To do:

Start Auto Search.

Start Manual Search.

SIRIUS ® radio operations

Buttons To do:

Select the band.

Select channels.

then

Display “CAT” = select categories.

Disc operations

Buttons To do:

Eject the disc.

Select chapters/tracks.

Search.

then

Display “FOLDER” = select folders. *

: functions if pressed and held.

*1Only for MP3

Monitor operations

Buttons To do:

Tu rn on the monitor.

Tu rn off the monitor.

Open/close the monitor. (See page 55.)

Change the monitor angle for a while. (See page 55.)

Slide in/out the monitor.

Remove the monitor.

Adjust the monitor angle. (See page 55.)

Change the aspect ratio.

Display the monitor adjustment screen.

Page 9

Preparation (Remote Controller—RM-RK220)

(back side)

With the + side facing upwards

Lithium coin battery (CR2025)

WARNINGS on the battery:

• Do not install any battery other than CR2025 or its equivalent; otherwise, it may explode.

• Store the battery in a place where children cannot reach. If a child accidentally swallows the battery, consult a doctor immediately.

• Do not recharge, short, disassemble, or heat the battery or dispose of it in a fire. These behaviors may cause the battery to be overheated, crack or fire.

• Do not leave the battery with other metallic materials. Doing this may cause the battery to give off heat, crack, or start a fire.

•When throwing away or saving the battery, wrap it in tape and insulate; otherwise, the battery may be overheated, crack or fire.

• Do not poke the battery with tweezers or similar tools. Doing this may cause the battery to be overheated, crack or fire.

ENGLISH

CAUTION:

DO NOT leave the remote controller in a place (such as dashboards) exposed to direct sunlight for a long time. Otherwise, it may be damaged.

The unit is equipped with the steering wheel remote control function.

• See the Installation/Connection Manual (separate volume) for connection.

DO NOT expose the remote sensor on the control panel to strong light (direct sunlight or artificial lighting).

Page 10

Operation Methods

You can operate this unit using three types of operation methods.

•This instruction manual explains the operations mainly using the Touch Panel Icons shown on

ENGLISH

the monitor.

• Using the Touch Panel Icons directly (See “BLIND CONTROL” on page 46.)

Press the Touch Panel Icons with your finger directly (if you wear a glove, take it off).

Examples: The following is just an example. On the actual monitor screen, the playback picture is shown (while video source is played back).

Do not operate the Touch Panel using a ball-point pen or similar tool with the sharp tip (it may damage the Touch Panel).

Ex. DVD playback

Changes the source.

Source and play mode information

Changes the function modes (icons shown to the right change accordingly).

Ex. Fader/balance adjustment

Operation icon

(BALANCE LEFT)

To erase and display the Touch Panel icons and indications, press the center portion of the

monitor screen.

•You can erase them only while viewing the playback pictures.

Clock time indication

Picture view window

Icons shown on this column change each time you press .

Operation icon (FADER FRONT)

Operation icon (BALANCE RIGHT)

Returns to the previous screen.

Operation icon (FADER REAR)

Page 11

• Using the Graphic User Interface (GUI) from the remote controller

You can use the Graphic User Interface in the same way as you touch the panel icons.

Examples:

ENGLISH

GUI

SET UP

Display GUI on the monitor (the cursor—yellow frame— appears around the currently selected icon).

• While one of the video sources is selected, the GUI function turns on and off at a press of the button.

To exit from GUI operation mode, press GUI again so that the yellow frame disappears.

• Using the buttons and controls directly

Some operations are only performed by pressing the buttons directly. You can also use the buttons and controls on the main unit and remote controller if they have the same or similar name or marks as shown on the touch panel.

Examples:

Move the cursor to an icon you want.

Confirm.

To eject a loaded disc.

To eject the monitor or store it in the compartment.

Page 12

Basic Operations

CAUTION on the monitor :

Do not open or close the monitor by hand.

ENGLISH

Do not apply any force to the monitor while it is moving. Such a behavior may damage the monitor loading mechanism.

For turning on the power, use the buttons on the main unit and the remote controller.

Turn on the power

“WAITING” scrolls on the display of the main unit (and the monitor comes out *).

•When the monitor comes out, power comes on to the monitor even if you have turned it off.

•For the space required for the monitor ejection, see page 85.

Adjust the volume

To change the monitor angle:

Hold

• See page 55 for details.

To drop the volume in a moment (ATT):

To restore the sound, press it again.

To store the monitor in place:

• When the unit is turned off, the power is temporarily turned on.

Select the source

TUNER

SIRIUS

CD-CH

• DISC: If a disc is not in the loading slot,

you cannot select “DISC” as the source to play.

• CD-CH/TV/SIRIUS: Without connecting

the CD changer, TV tuner unit, or satellite radio (SIRIUS “CD-CH” (CD changer), “TV,” or “SIRIUS.”

), you cannot select

DISC

AV1

AV2

To turn off the power:

Hold

* This depends on the “AUTO OPEN/

CLOSE” setting (see page 46). If the monitor does not come out...

Page 13

○○○○○○○○○

Setting the clock

You can also set the clock system to 24 hours or 12 hours.

While playing any source...

• If the touch panel icons are not shown on the monitor, touch the center portion of the monitor screen.

Appears only when SIRIUS radio is connected (see also page 72).

Set the clock time.

Exit

To display the clock time:

When the unit is turned off, the clock time is

displayed on the display of the main unit for a while.

On the main unit

When the unit is turned on...

Each time you press the button, the information shown on the display of the main unit changes.

Information shown on the display differs according to the selected source.

TUNER: Frequency = Clock =

Band&Preset no. =

DISC: Play time = Clock =

Title/Chapter/Folder/Track no. =

AV1/AV2:

Source name = Clock =

TV: Channel = Clock =

TV&Preset no. =

CD-CH: Elapsed time = Clock = Disc no.

= Folder/Track no. =

SAT (SIRIUS):

Channel no. = Clock = Band&Preset no. =

It does not appear for some sources.

It will be shaded when not available.

ENGLISH

• Press to start the clock time counting exactly from 00 second.

Page 14

○○○○○○○○○

Changing the source

While playing any source...

ENGLISH

The current source is highlighted.

○○○○○○○○○

Changing the graphic screen

You can select one of eight graphics in the picture view window.

• See page 82 for each graphic screen.

When shipped from the factory, display demonstration has been activated, and starts automatically when no operations are done for about 30 seconds (except while playing a DVD/ VCD). To cancel it, select one of the graphic screen.

While playing any source...

Ex. While listening to FM

broadcast

Newly selected source operation screen appears.

Other icons Reference pages

See page 33.

See pages 43 – 52.

Returns to the previous screen.

•To view the playback picture from any video source, select the screen where the actual playback pictures are shown.

○○○○○○○○○

Changing the touch panel

○○○○○○○○○

color

You can change the touch panel color (excluding the picture view window) by selecting from four preset color—blue, silver, red, and black.

While playing any source...

Ex. While listening to FM

broadcast

Page 15

○○○○○○○○○

Displaying the level meter

You can display the level meter on the graphic screen, by selecting from four preset patterns.

•While viewing the playback picture or display demonstration, you cannot show the level meter.

While playing any source...

Ex. While listening to FM

broadcast

How to read the display of the main unit:

While listening to radio (FM/AM):

ENGLISH

2341

1 Lights up when Dolby Pro Logic II is

activated (see page 36).

2 Main information—Frequency/Band/

Preset no.

3 MO indicator lights when FM reception

mode is “MONO.”

4 ST indicator lights while receiving an

FM stereo broadcast.

The following level meters are displayed in sequence.

Level meter 1

Level meter 2

No level meter will appear when no sound comes in.

Level meter 3

Level meter 4

While playing a disc:

21 3

1 Lights up when Dolby Digital signal is

detected (see page 36).

2 Lights up when Dolby Pro Logic II is

activated (see page 36).

3 Lights up when DTS signal is detected

(see page 36).

4 Main information—Play time/Title no./

Chapter no./Folder no./Track no.

5 Lights up when the disc is detected. 6 Lights up when an MP3 CD is detected.

•You can dim the display and the buttons on the front panel (see page 52).

Page 16

Radio Operations

ENGLISH

Volume level appears when adjusted.

Dual Mode indicator (see page 33)

SOURCE icon (see pages 14 and 33)

Current band/Preset no.

Station frequency

FM reception mode Search mode Sound mode (see page 39) Surround/DSP mode (see page 36)

Not available for AM.

Available only after pressing “M” (below this icon).

See page 53.

See page 14.

See page 15.

See page 39.

See pages 43 – 52.

Back to the beginning

Page 17

Listening to the Radio

•To tune in to a station using Preset Search, first store your favorite stations into memory (6 stations for each band: see page

18).

Select the Tuner

then

Select a band (FM/AM)

Select Search Mode

AUTO:To start Auto Search.

MANUAL: To start Manual Search.

PRESET: To select preset station

numbers (only possible after storing stations in memory).

Tune in to a station

• For Auto Search, press either icon once.

“Auto Search” begins. When a station is received, searching stops.

• For Manual Search, press either icon

repeatedly (or hold) until a station you want is selected.

• For Preset Search, press either icon

repeatedly until a preset number you want is selected.

ENGLISH

This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.

When an FM stereo broadcast is hard to receive:

FM reception mode changes to “MONO.” Each time you press the icon, monaural reception mode turns on and off.

•When FM reception mode is “MONO,” reception improves, but stereo effect will be lost.

Page 18

○○○○○○○○○

Storing stations in memory

Manual presetting

You can preset 6 stations for each band.

FM station automatic presetting—SSM (Strong-station Sequential Memory)

ENGLISH

• This functions only for FM bands.

Select the FM band (FM1 – FM3) you want to store FM stations into.

Start SSM.

then

Select the band (FM1 – FM3, and AM) you want to store a station into.

Tune in to a station.

then

Select “MANUAL” (or “AUTO”).

Store the station into a preset number.

Local FM stations with the strongest signals are searched and stored automatically in the selected FM band.

then

Preset station information will be displayed.

Page 19

To tune in to a preset station

• See also “Listening to the Radio” on page 17.

○○○○○○○○○

Displaying the preset list

You can store and select the preset stations using the preset list on the monitor screen.

To store a station using the preset list

Select the band (FM1 – FM3, and AM) you want to store a station into.

Tune into a station.

then

Select “MANUAL” (or “AUTO”).

ENGLISH

To select a preset station using the preset list

• Preset numbers, station frequencies and assigned names (see page 53) are shown on the list.

Store the station into a preset number.

then

Page 20

DVD/VCD Operations

ENGLISH

Input signal channels are indicated a few second after detected. (See page 75.)

DVD

Dual Mode indicator (see page 33)

SOURCE icon (see pages 14 and 33) PBC indicator (for VCD; see page 25)

Current track no. (for VCD) Current title/chapter no. (for DVD)

Play time information (see page 30)

Audio signal format

Playback mode (see page 30) Sound mode (see page 39) Surround/DSP mode (see page 36)

Playback picture will be shown in the picture view window.

Playback buttons (see page 22)

VCD

Only for VCD with PBC

While playing

Before playing

*1Available only while playing. *2Not available while playing

with PBC activated.

*3Not available while playing

with PBC activated, but available while not playing.

Back to the beginning

See page 14.

See page 15.

See page 39.

See pages 43 – 52.

Page 21

CD/MP3 Operations

CD/CD Text

Dual Mode indicator (see page 33)

SOURCE icon (see pages 14 and 33)

Current track no. (for CD)

Current folder/track no. (for MP3) Play time information (see page 30) Audio signal format (only for DTS CD) Playback mode (see page 30) Sound mode (see page 39) Surround/DSP mode (see page 36)

Disc text/ID3 tag information area

Only for MP3 (see page 22)

Playback buttons (see page 22)

ENGLISH

MP3

Only for CD: See page 53.

See page 14.

See page 15.

See page 39.

See pages 43 – 52.

Back to the beginning

*Available only while playing

Page 22

Basic Disc Operations

Before performing any operations, observe the following...

ENGLISH

•For DVD playback, change the Setup Menu setting (see page 43).

” appears on the monitor, the disc

• If “ cannot accept the operation you have tried. – In some cases, “

operations will not be accepted.

Insert a disc

The unit turns on, then draws the disc, and starts playback automatically.

• The monitor does not come out from its compartment if “AUTO OPEN/CLOSE” is set to “OFF” (see page 46). If the monitor does not comes out...

” is not display, but

Operate the disc

: Selects the folder (only for

MP3).

: Stops (see “Stopping play” on

page 75).

• VCD/CD/MP3 playback will continue endlessly until you stop it.

: Starts playback.

:Pauses. To resume playback,

press 3.

: Goes back to the beginning of

the current chapter/track, then skips to the previous chapters/ tracks if pressed repeatedly.

: Skips to the following chapters/

tracks if pressed repeatedly.

To stop play and eject the disc:

• It takes several seconds for the unit to detect a disc type.

• If a disc menu appears, see page 25.

Adjust the volume

Volume level appears.

Do not use the following discs:

Warped disc

Sticker

Disc

Sticker residue

Stick-on label

Page 23

The following marks used in this manual indicate the playable discs.

DVD

VCD

with/without PBC

MP3

VCD

with PBC

All playable

discs

On-screen guide icons

To fast-forward or reverse the chapter or track, press ¡ or 1 on the remote controller while playing a disc.

Each time you press the button, the search speed changes as follows:

ENGLISH

x2 \ x5 \ x10 \ x20 \ x60*

To resume normal speed, press 3.

If you hold ¢ or 4 while playing a disc, the search speed changes: x2 \ x10.

• If you release the button, normal speed playback resumes.

During play, the following guide icons may appear for a while on the monitor.

•The following guide icons are displayed when “GUIDE” is set to “ON” (see page 48).

:Appears at the beginning of a

scene containing multi-subtitle languages (only for DVD).

:Appears at the beginning of a

scene containing multi-audio languages (only for DVD).

:Appears at the beginning of a

scene containing multi-angle views (only for DVD).

: Appears when you press 3.

: Appears when you press 8.

: Appears when you start

forward search (search speed also appears).

:Appears when you start reverse

search (search speed also appears).

: Appears when you start

forward slow motion (slow motion speed also appears).

:Appears when you start reverse

slow motion (slow motion speed also appears). (Only for DVD.)

To play back the still picture

Press 8. A still picture appears.

Frame by Frame Playback—You can advance the still picture frame by frame by pressing 8 repeatedly.

To resume normal playback, press 3.

Slow Motion Playback—You can advance or

reverse* the still picture in slow motion by pressing ¡ or 1 on the remote controller. Each time you press the button, the search speed changes as follows:

1/32 \ 1/16 \ 1/8 \ 1/4 \ 1/2

To resume normal speed, press 3.

If you hold ¢ or 4 during pause, the slow motion speed changes: 1/32 \ 1/8.

• If you release the button, normal speed playback resumes.

* Only for DVD

Page 24

○○○○○○○○○

FOLDER TRACK

then

Changing the aspect ratio

○○○○○○○○○

Prohibiting disc ejection

You can change the aspect ratio of the playback pictures.

ENGLISH

• This function is only possible using the buttons on the main unit or on the remote controller.

• Aspect ratio cannot be changed while the GUI operation mode is activated.

On the remote

On the main unit

controller

ASPECT

• When viewing 16:9

video signals:

FULL

NORMAL

• When viewing 4:3 video signals:

FULL

NORMAL

You can lock a disc in the loading slot.

While playing any source...

HoldHold

(at the same time)

“NO EJT” appears on the display of the main unit, and the disc cannot be ejected.

To cancel the prohibition, press the same buttons again. “EJT OK” appears.

○○○○○○○○○

Selecting MP3 folders

You can also select the MP3 folder using the buttons on the main unit and on the remote controller.

On the remote controller

then

WIDE

ZOOM

CINEMA

• When you change the aspect ratio, either “RECEIVER” or “CRADLE” (see page 33) appears with the selected aspect ratio. It indicates where the monitor is now loaded. Aspect ratio cannot be set separately for “RECEIVER” or “CRADLE.”

WIDE

ZOOM

CINEMA

On the main unit

While “FOLDER” is displayed on the display of the main unit:

Page 25

○○○○○○○○○

Operating the disc menu

Menu-driven playback is possible while playing back a DVD with menu-driven features or a VCD with the PlayBack Control (PBC) function.

While playing a DVD:

DVD discs generally have their own menus or title lists. A title list (TOP MENU) usually contains titles of movies and songs recorded. On the other hand, a menu (MENU) usually contains various information about the disc and playback selections.

When using the remote controller

1 Press TOPMENU or MENU. 2

Push the cursor controller (OK) up/down/ left/right (5/∞/2/3) to select an item.

Press OK to confirm.

While playing a VCD:

The PBC function allows you to operate the VCD using menus. When you start playback, a menu will automatically appear on the monitor.

•A menu may be a list of items, divided screens, or some moving pictures.

•When a VCD with PBC is detected, the PBC indicator appears on the monitor.

• When “3” or “SELECT” is displayed on the monitor, press 3 (or OK on the remote controller if pressing 3 does not work) to start playback.

ENGLISH

If the disc menu appears automatically, press this.

Select an item, then confirm.

Return to the display in Step 2 above.

Erase the operation screen.

Confirm

Return to the previous page of the discs menu.

Select

Go back to the disc menu.

Enter a number.

Erase the operation screen.

Move the superimpose position to the left.

Return to the display in Step 2 above.

Return to the previous page of the PBC menu.

•To select number 5, press 5.

•To select number 10, press 10.

•To select number 20, press +10, then 10.

Page 26

When using the number buttons on the remote

ZOOM

DUAL

controller

•To select number 5, press 5.

•To select number 10, press 10.

•To select number 23, press +10, +10, then 3.

ENGLISH

To cancel the PBC playback

You can cancel the menu-driven operations (PBC function) using the remote controller.

1 Press 7 to stop playback. 2

Press number buttons to select a track. Playback without PBC starts from the selected track.

•You can also use Track Search icon (see page 31) and Time Search icon (see page

32) on the Touch Panel to start playback without PBC.

To resume the PBC function again, press TOPMENU or MENU on the remote controller.

•You can also use PBC icon on the Touch Panel.

then

○○○○○○○○○

Zooming in

You can zoom into a particular portion of the picture.

• This function is only possible using the remote controller.

\ x2 \ x4 \ x8 \ x1 \ x2 \ x4 \ x8 \ • • • •

ZOOM x4

Move the zoomed-in portion on the monitor.

ZOOM x4

○○○○○○○○○

Replaying the previous scenes

You can replay about 10-second portion of the previous scene while playing a DVD—One Touch Replay.

To cancel Zoom, press OK or press ZOOM repeatedly until “ZOOM x1” appears.

Page 27

○○○○○○○○○

Selecting subtitles

○○○○○○○○○

Selecting audio languages

While playing a chapter containing subtitles in different languages, you can select the subtitle language to display on the monitor.

•You can also select the subtitle language using SETUP menu (see page 44).

Select a subtitle language you want.

Ex.

1/3 ENGLISH

3/3 SPANISH

2/3 FRENCH

For DVD: While playing a chapter containing audio languages, you can select the language to listen to.

•You can also select the audio language using SETUP menu (see page 44).

For VCD: While playing a track, you can select the audio channel to play. This is convenient when playing a Karaoke VCD.

Select an audio language you want.

When playing DVD:

ENGLISH

Ex.

1/3 ENGLISH

2/3 FRENCH

3/3 SPANISH

To be continued...

Page 28

When playing VCD:

○○○○○○○○○

Selecting multi-angle views

ENGLISH

STEREO LEFT RIGHT

• STEREO: To listen to normal stereo (left/ right) playback.

• LEFT: To listen to the left audio channel.

• RIGHT: To listen to the right audio channel.

While playing a disc containing multi-angle views, you can view the same scene at different angles.

Select a view angle you want.

Ex.

1/3 2/3

3/3

Page 29

○○○○○○○○○

Locating a folder/track using

○○○○○○○○○

the list

To locate a track by displaying the track list

To locate a folder by displaying the folder list

• This functions only for MP3.

Select a folder you want.

Current track name or ID3 Tag

To next/previous page of the list

Select a track you want.

Current folder name or ID3 Tag (for MP3) Disc name (for CD) or CD Text

Ex. When playing MP3

ENGLISH

To next/previous page of the list

Page 30

○○○○○○○○○

Displaying the disc text

○○○○○○○○○

information

ENGLISH

With Auto Scroll or Scroll selected, you can display the text and scroll it on the monitor if it is long and cannot be displayed at a time.

○○○○○○○○○

Selecting playback modes

You can use only one of the following playback modes at a time—Repeat Play, Random Play, and Intro Scan.

•For VCD: While PBC is not in use.

Repeat Play

You can repeat playback.

•Repeat Play can be deactivated only for DVD.

(For CD)

Scroll

• Scroll: Text on the information area

scrolls once.

• Auto Scroll: Text on the information area

scrolls every 5 seconds.

•Off:The information area goes off

(no text information will be shown).

○○○○○○○○○

Displaying the time information

(For MP3)

Auto Scroll

Off

○○○○○○○○○

• TIME: Elapsed playing time of the current

chapter/track

• REM: Remaining time of the current

chapter/track

•TOTAL: Elapsed title time (for DVD)

Elapsed disc time (for other discs)

•T.REM: Remaining title time (for DVD)

Remaining disc time (for other discs)

TIME

REM

TOTALT.REM

When playing DVD:

REPEAT PLAY CHAPTER REPEAT PLAY TITLE

REPEAT PLAY OFF

When playing VCD/CD:

REPEAT PLAY TRACK REPEAT PLAY OFF

When playing MP3:

REPEAT PLAY TRACK REPEAT PLAY FOLDER

REPEAT PLAY OFF

REPEAT PLAY

• CHAPTER:Repeats the current chapter.

• TITLE: Repeats the current title.

• TRACK: Repeats the current track.

• FOLDER: Repeats the current folder.

• OFF: For DVD: Cancels Repeat Play. For VCD/CD/MP3:

Repeats the disc.

Page 31

Random Play

You can play back tracks at random.

When playing VCD/CD:

INTRO SCAN TRACK INTRO SCAN OFF

ENGLISH

When playing VCD/CD:

RANDOM PLAY DISC RANDOM PLAY OFF

When playing MP3:

RANDOM PLAY FOLDER RANDOM PLAY DISC

RANDOM PLAY OFF

RANDOM PLAY

• DISC: Plays randomly all tracks on the disc.

• FOLDER: Plays randomly all tracks of the current folder, then moves to the next folder and so on.

• OFF: Cancels Random Play.

Intro Scan

You can play back the first 15 seconds of each track sequentially.

When playing MP3:

INTRO SCAN TRACK INTRO SCAN FOLDER

INTRO SCAN OFF

INTRO SCAN

• TRACK: Plays the beginning of all tracks.

• FOLDER: Plays the first tracks of all folders.

• OFF: Cancels Intro Scan.

○○○○○○○○○

Searching for scenes or songs

You can use various search functions to find your favorite scenes or songs.

Title/Chapter/Folder/Track Search

•For DVD: Title Search before playing, and

Chapter Search while playing.

•For VCD: During stop when PBC is in use.

(For DVD)

(For VCD/CD)

(For MP3)

To be continued...

Page 32

Enter a number, then confirm.

Ex. When playing DVD:

ENGLISH

Enter a number, then confirm.

Ex. When playing DVD:

Clear the entry.

When using the number buttons on the remote controller

•To select number 5, press 5.

•To select number 10, press 10.

•To select number 23, press +10, +10, then 3.

You cannot select folder using the remote controller.

Time Search

You can start playing a particular point by specifying the elapsed playing time of the current title (for DVD) and of the disc (for VCD/CD).

•For DVD: During play or pause. (For some DVDs: any time)

•For VCD: While not playing with PBC activated.

Confirm

Clear the entry.

Ex. when playing VCD/CD:

Examples (for DVD)

To play back from 2(H):34(M):00(S) Press number buttons 2, 3, 4, then ENTER.

TIME 2 : 34 :

To play back from 58(M):00(S) Press number buttons 0, 5, 8, then ENTER.

TIME 0 : 58 :

Example (for VCD/CD)

To play back from 23(M):40(S) Press number buttons 2, 3, 4, then ENTER.

TIME 23 : 4

•You do not have to press “0” to enter the trailing zeros.

Confirm

Page 33

Dual Mode Operations

You can play back two different sources as the main source (MAIN) and subsidiary source (SUB). However, “CD-CH” (CD changer) and “SAT” (satellite) cannot be select as the main/subsidiary source at the same time even with activating Dual Mode. (See also pages 56 and 69.) You can listen to the main source through the speakers, while the subsidiary source through the monitor inserted into the cradle or the one connected to the AV OUTPUT jacks.

•For connections of the cradle and an optional monitor, refer to the Installation/ Connection Manual (separate volume).

○○○○○○○○

Selecting the sources

To activate Dual Mode and select the subsidiary source

Select the subsidiary source (SUB) you want.

• The current sources for MAIN and SUB are highlighted.

Will be shaded (not available) if you have selected one of these sources as the main source.

To show the main/subsidiary source operation screen on the monitor

To show the main source operation screen (DUAL–MAIN)

ENGLISH

To show the subsidiary source operation screen (DUAL–SUB)

Dual Mode indicator (DUAL–MAIN or DUAL–SUB) appears.

Ex. When the subsidiary source operation

screen (DUAL–SUB) is displayed.

Page 34

To cancel the Dual Mode, press . Each time you press the icon, Dual Mode is turned on and off alternately.

•When Dual Mode is turned off, the main source screen appears.

ENGLISH

○○○○○○○○○

Adjusting AV OUTPUT volume

Select an appropriate volume level for the component connected to the AV OUTPUT jacks on the hideaway unit.

• This functions without respect to the Dual Mode setting.

When using the remote controller:

•For Dual Mode operations... – When controlling the monitor connected

to the AV OUTPUT jacks, aim the remote controller at the remote sensor on the main unit.

– When controlling the monitor inserted

into the cradle, aim the remote controller at the remote sensor on the cradle.

To activate Dual Mode

Hold

ZOOM

DUAL

Adjust the AV output volume.

It does not appear for some sources.

It will be shaded when not available.

On the remote controller

MAIN SUB

then

AVOUT VOL

Each time you press and hold the button, Dual Mode turns on and off.

• When Dual Mode is turned on, the source

selection screen appears on the monitor (see page 33).

To operate the subsidiary source 1

MAIN SUB

2Press the source buttons, then the

source operation buttons.

To operate the main source 1

MAIN SUB

2Press the source buttons, then the

source operation buttons.

While Dual Mode is in use...

• The playback source does not change to “DISC” though you insert a disc. “DUAL” flashes on the display of the main unit.

•You can only adjust the volume level for the subsidiary source (the other sound adjustments cannot be used for the subsidiary source).

Page 35

Surround Mode Operations

ENGLISH

Activate and select the surround mode or DSP mode.

Make adjustment if you want to.

• If neither surround mode nor DSP mode is activated, you cannot make adjustment.

When surround mode is activated:

It does not appear for some sources.

It will be shaded when not available.

See page 41.

See page 34.

See page 39.

When DSP mode is activated:

Page 36

○○○○○○○○○

Introducing surround/DSP mode

Surround modes

Dolby Digital

Dolby Digital is a digital signal compression

ENGLISH

method, developed by Dolby Laboratories, and enables multi-channel encoding and decoding (1ch up to 5.1ch).

Dolby Digital 5.1 CH

Dolby Digital 5.1 CH encoding method records and digitally compresses the left front channel, right front channel, center channel, left surround channel, right surround channel, and LFE channel signals (total 6 channels, but the LFE channel is counted as 0.1 channel. Therefore, called 5.1 channel). Dolby Digital enables stereo surround sounds, and sets the cutoff frequency of the surround treble at 20 kHz, compared to 7 kHz for Dolby Pro Logic. As such, the sound movement and “being there” feeling are enhanced much more than Dolby Pro Logic.

DTS

DTS is another digital signal compression method, developed by Digital Theater Systems, Inc., and enables multi-channel encoding and decoding (1ch up to 6.1ch).

DTS Digital Surround

DTS Digital Surround is another discrete

5.1-channel digital audio format available on CD, LD, and DVD software. Compared to Dolby Digital, the DTS Digital Surround format has a lower audio compression rate which enables it to add breadth and depth to the sounds reproduced. As such, DTS Digital Surround features natural, solid, and clear sound.

Dolby Pro Logic II

It is a multi-channel playback format to convert 2-channel software into 5-channel (plus subwoofer). The matrix-based conversion method used for Dolby Pro Logic II makes no limitation for the cutoff frequency of the surround treble and enables stereo surround sound.

•This unit provides two types of Dolby Pro

Logic II modes—Pro Logic II “MOVIE” and Pro Logic II “MUSIC.”

MOVIE: Suitable for playing any Dolby

Surround encoded software.

MUSIC: Suitable for playing any 2-channel

stereo software.

No sound may come out of the subwoofer (though the subwoofer is activated) with Dolby Pro Logic II in use. (This depends on your speaker setting—see page 51.)

Digital Signal Processor (DSP) mode— reproducing the sound field

The sound heard in a concert hall, club, etc. consists of direct sound and indirect sound— early reflections and reflections from behind. Direct sounds reach the listener directly without any reflection. On the other hand, indirect sounds are delayed by the distances of the ceiling and walls. These direct sounds and indirect sounds are the most important elements of the acoustic surround effects. DSP modes can create these important elements, and give you a real “being there” feeling.

Page 37

○○○○○○○○○

Turning on and off the surround/

○○○○○○○○○

DSP mode

You can use surround or Digital Signal Processor (DSP) mode while playing any source. However, when playing a multi-channel encoded disc, you cannot apply DSP mode to the playback sounds.

•When “AUTO SURROUND” is set to “ON” (initial setting when shipped from factory), an appropriate surround mode is automatically selected without any setting operation (see page 50).

•To obtain the best possible surround sounds, set the seat position and speaker size correctly (see pages 50 and 51). If only rear

speakers are activated (set to “LARGE” or “SMALL”), surround/DSP mode is defeated (set to “DEFEAT”) and cannot be changed.

ENGLISH

• While playing a multi-channel encoded disc:

Surround On (DSP Off) DEFEAT (Surround Off)

• While playing a 2-channel (stereo) disc:

Surround On (DSP Off) DSP On (Surround Off)

DEFEAT

(Surround/DSP Off)

• Surround On (DSP Off)

While playing a multi-channel Dolby Digital encoded disc, “Dolby Digital” is automatically selected. While playing a multi-channel DTS encoded disc, “DTS” is automatically selected. While playing any other disc, “Dolby Pro Logic II” is automatically selected.

•You can select either “Dolby Pro Logic

II Movie” or “Dolby Pro Logic II Music.”

• DSP On (Surround Off)

Currently selected DSP mode is activated.

Ex. When playing DVD

• DEFEAT (Surround/DSP Off)

Both surround and DSP mode is canceled.

•You cannot go to the next step.

To be continued...

Page 38

Adjust the selected surround or DSP mode.

ENGLISH

When surround mode is activated:

When DSP mode is activated:

Ex. When selecting “HALL.”

1 Select one of the DSP modes.

HALL: Reproduces the spatial

feeling of a large shoeboxshaped hall designed primarily for classical concerts.

: Selected automatically when multi-

channel DTS signal is detected (while playing a DVD or a DTS CD). No further adjustment is allowed.

: Selected automatically when multi-

channel Dolby Digital signal is detected (while playing a DVD). No further adjustment is allowed.

: Select either “MOVIE” or “MUSIC.” When you select “MUSIC,” you can adjust the following items.

•

“wraparound” sound effect with side-wall image. To cancel it, select “OFF.”

•

so it may be heard only from the center speaker, only from the left/right front speakers as a “phantom” center image, or various combinations of these speakers. As the number increases, the “phantom” effect becomes stronger. (Normally select “4.”) To cancel it, select “OFF.”

: Select “ON” to add

: Adjust the center image

LIVE: Reproduces the spatial

feeling of a live music club with a low ceiling.

CLUB: Reproduces the spatial

feeling of a rocking dance club.

DOME: Reproduces the spatial

feeling of a stadium with a high ceiling.

THEATER: Reproduces the spatial

feeling of a theater.

2 Adjust the effect level (from 1 to 5).

As the number increases, the effect becomes stronger.

Page 39

Sound Modes (iEQ) Operations

The following operations are only possible for the main source when using Dual Mode.

Select one of the preset sound (iEQ) modes (then make adjustment if you want to

make your own sound mode).

Select sound modes.

It does not appear for some sources.

It will be shaded when not available.

See page 35.

See page 41.

See page 34.

Adjust the level of each frequency band.

ENGLISH

Display the other set of the sound modes.

Select memory no. to store.

Store your adjustment (display the screen below).

Page 40

○○○○○○○○○

Selecting preset sound modes

You can select a sound mode suitable to the music genre.

Av ailable sound modes:

ENGLISH

• HARD ROCK / R&B / POP / JAZZ / DANCE / COUNTRY / REGGAE / CLASSIC

• USER1 / USER2 / USER3

• FLAT (To cancel the sound mode)

Select one of the preset sound (iEQ)

modes.

○○○○○○○○○

Storing your own sound modes

You can adjust the sound modes and store your own adjustments in memory.

Repeat steps 1 to 4 on the left column to select a sound mode you want to adjust.

Make adjustments as you like.

After adjustment is finished...

Select one of the user sound modes (USER1, USER2, or USER3) you want to store into.

Display the other set of the sound modes (see below).

For details about the preset settings of each sound

mode, see page 82.

Page 41

Other Sound Adjustments

Fader/Balance adjustments is only possible for the main source when using Dual Mode.

Make adjustment as you like.

To adjust the input level

This setting is required for each source except FM. Once you have made an adjustment, the volume level will automatically changes by adjusted level whenever you change the source.

Adjust to match the input level to the FM sound level.

ENGLISH

It does not appear for some sources.

It will be shaded when not available.

See page 35.

See page 34.

See page 39.

To adjust fader and balance

Adjust fader—speaker output balance between the front and rear speakers.

Adjust the balance—speaker output balance between the left and right speakers.

Page 42

Monitor Adjustments

When no playback picture from the source is displayed, you can only adjust the brightness.

ENGLISH

Display SCREEN CONTROL screen.

Hold

On the main unit

Select an item to adjust.

Adjust the item.

Hold

ASPECT

On the remote controller

Adjustable items

: Indicates the current ambient light level.

As this level changes, the monitor adjusts the brightness automatically to match it to the current ambient light level.

: Adjust the brightness separately for day

time ( DARK).

•The monitor can memorize the difference

) and night time ( )—(LIGHT/

between the ambient light level and adjusted level, and adjusts the brightness automatically, keeping the level difference memorized.

Ex. When adjusting “BRIGHT.”

*1When you adjust the monitor, either

“RECEIVER” or “CRADLE” (see page 33) appears. It indicates where the monitor is now loaded. You cannot store your adjustment separately for “RECEIVER” or “CRADLE.”

: Adjust the contrast (DOWN/UP).

: Adjust the tint if the human skin color is

unnatural (RED/GREEN).

: Adjust the color of the picture—thinner

(THIN) or thicker (THICK).

Page 43

Initial Setup—DVD MENU

You can preset the initial disc playback conditions.

• No change can be made on the DVD Menu during play or when “DISC” is selected as the subsidiary (SUB) source.

ENGLISH

Select the item you want.

Change the setting.

•For details, see the following pages.

It does not appear for some sources.

It will be shaded when not available.

See page 13.

Appears only when SIRIUS radio is connected (see also page 72).

Ex. When setting “MONITOR TYPE.”

Page 44

MENU LANGUAGE

Select the menu language.

ENGLISH

AUDIO LANGUAGE

Select the audio language.

SUBTITLE

Select the subtitle language. To erase the subtitle, select “OFF.”

If the language you want is not listed for the language menu list

See page 83 to find the language codes.

MONITOR TYPE

Select the monitor type of your TV (connected to the AV OUTPUT jacks) to play DVD Video recorded with aspect ratio of 16:9.

•For the removable monitor of this unit, set this to “16:9 AUTO.”

• 16:9 NORMAL:

Select when the aspect ratio of your TV is fixed to 16:9 (wide TV).

• 16:9 AUTO:

Select when the aspect ratio of your TV is 16:9 (wide TV), and it is equipped with aspect ratio adjustment function.

• 4:3 LB (Letter Box):

Select when the aspect ratio of your TV is 4:3 (conventional TV). While viewing a wide screen picture, the black bars appear on the top and the bottom of the screen.

• 4:3 PS (Pan Scan):

Select when the aspect ratio of your TV is 4:3. While viewing a wide screen picture, the black bars do not appear; however, the left and right edges of the pictures will not be shown on the screen.

Moves the cursor position.

Confirm

Backspace (Erase)

When the language you have selected is not recorded on a disc, the original language is automatically used as the initial language.

16:9

4:3 LB

4:3 PS

Page 45

Initial Setup—MONITOR

You can preset the initial monitor conditions.

ENGLISH

Select the item you want.

Change the setting.

•For details, see the following pages.

It does not appear for some sources.

It will be shaded when not available.

See page 13.

Appears only when SIRIUS radio is connected (see also page 72).

Ex. When setting “BEEP TONE” to “OFF”

Page 46

AUTO OPEN/CLOSE

BEEP TONE

• AUTO: The monitor comes out* or goes in

ENGLISH

• OFF: Cancels this function.

* If you close the monitor before turning off the

BLIND CONTROL

• ON:The monitor works as Touch Panel

automatically when you turn on or off the power.

power, the monitor will not come out next time you turn on the power.

when playing back pictures on the monitor.

–The boundaries cannot be shown on

the monitor screen. This example is just to teach you where to touch on the Touch Panel when you operate on it.

• ON:Touch tone beeps when you touch the

Touch Panel icon.

• OFF: Cancels this function.

WIRING CHECK

You can confirm the wiring connection is correctly done for particular functions.

Indicators

•When the listed wires have been connected and electrical signals are detected through the wires, the corresponding indicators light up.

1 Upper/lower portions:

Adjust the volume.

2 Left/right portions:

• Skips the chapters/tracks for DVD/VCD.

• Searches the chapters/tracks for DVD/VCD.

• Searches for TV channels for TV (see page 63).

3 Center portion:

Turns on and off the on-screen icons. (This also works even if “BLIND CONTROL” is set to “OFF.”)

• OFF: Cancels this function.

Page 47

Initial Setup—ON SCREEN

You can preset the initial on-screen conditions.

ENGLISH

Select the item you want.

Change the setting.

•For details, see the following pages.

It does not appear for some sources.

It will be shaded when not available.

See page 13.

Appears only when SIRIUS radio is connected (see also page 72).

Language selection screen appears.

Ex. When setting “CLOCK” to “OFF”

Page 48

ON SCREEN LANGUAGE

You can select the language for this Setup Menu and some of the messages displayed on the monitor.

ENGLISH

GUIDE

MESSAGE

• ON: Speaker/signal indicators (see page

75) and messages are displayed.

Messages are displayed on the viewing window of the monitor screen... – When selecting repeat mode,

random mode, intro scan, etc.

–When starting Time Search, Title

Search, Chapter Search, and Track Search.

Ex. One of the messages appears

when selecting repeat mode.

• ON: On-screen guide icons (see page 23)

are displayed on the monitor while operating the built-in disc player. –When the TV tuner unit

(KV-C1000) is connected, its onscreen display will be shown.

• OFF: Cancels this function.

CLOCK

• ON: Display the clock time on the

monitor.

• OFF: Cancels this function.

ANIMATION EFFECT

• ON: Source selection screen appears and

disappears as if you open or close the curtain.

• OFF: Cancels this function.

Page 49

Initial Setup—AUDIO MENU/PSM

You can preset the initial audio-related conditions and Preferred Setting Modes (PSM).

•You cannot select “AUDIO MENU” when the subsidiary source operation screen is displayed on the monitor (with Dual Mode turned on; see page 33).

ENGLISH

Select the item you want.

Change the setting or enter the setting screen.

•For details, see the following pages.

It does not appear for some sources.

It will be shaded when not available.

See page 13.

Appears only when SIRIUS radio is connected (see also page 72).

Appears when TV tuner unit KV-C1000 is connected.

Ex. When entering “SEAT POSITION”

Page 50

AUTO SURROUND

You can activate an appropriate surround mode automatically when a loaded disc is detected.

ENGLISH

• ON: An appropriate surround/DSP mode is

automatically selected.

While Dolby Digital multi-channel signals are detected, “Dolby Digital” is automatically selected.

While DTS multi-channel signals are detected, “DTS” is automatically selected.

While Dolby Surround (PL II) signals are detected, “Dolby Pro Logic II Movie” is automatically selected.

While Linear PCM signals are detected (for DVD/CD), “Dolby Pro Logic II Music” is automatically selected.

While other signals are detected, Surround mode is defeated.

• OFF: Cancels this function.

• FRONT LEFT:For the front left seat.

•

FRONT RIGHT

:For the front right seat.

• ALL CENTER:For all front and rear seats. REAR CENTER:

•

For the rear seats.

: Displays the SPK

DISTANCE screen. You can adjust the speaker distance from your listening position in meters or feet.

•

: Displays the SPK

LEVEL screen. You can adjust the speaker level referring to the test tone.

Auto Surround does not work for any sources other than “DISC.” When another source is selected, the currently selected Surround or DSP mode is resumed (see page 37).

SEAT POSITION

Select the listening seat position where you want to locate the sound image.

• Speaker distance and speaker level can be memorized for each position.

Display sub-setting screens.

Emits the test tone from each speaker in sequence. To stop, press again.

D (Dynamic). RANGE COMPRESSION

You can enjoy a powerful sound even at a low volume level by compressing dynamic range (difference between the lowest and the highest frequency sounds).

•This takes effect for all the playback sources.

Page 51

• OFF: Select when you want to enjoy

playback with its full dynamic range (no effect applied).

• MID: Select when you want to reduce the

dynamic range a little.

• MAX: Select when you want to apply the

compress effect fully (useful at a low volume level).

SPEAKER SIZE

Set speaker information correctly.

• FRONT/CENTER/REAR:

Set the speaker size properly. – LARGE: If the cone speaker size is

more than 13 cm (5-

/4 in.)

– SMALL: If the cone speaker size is

less than 13 cm (5-1/4 in.)

– NONE: If not used.

• SUBWOOFER:

Select “YES” (connected) or “NO” (disconnected).

• SUBWOOFER PHASE:

Select either “NORMAL” or “REV. (reverse)” to obtain better subwoofer sounds.

CROSS OVER

You can select the crossover frequency for the small speakers used. The signals below the preset frequency level will be sent to the subwoofer (or to the “LARGE” speakers when “SUBWOOFER” is set to “NO”).

AMP GAIN

You can change the maximum volume level of this unit. When the maximum power of the speakers is less than 50 W, select “LOW” to prevent them from being damaged.

• HIGH:You can adjust the volume level

from “0” to “50.”

• LOW:You can adjust the volume level

from “0” to “30.”

ENGLISH

•These settings are very related to one another; therefore, one setting is changed, some other settings will be changed automatically and appropriately (see page 80).

• Sound comes out of the subwoofer for Dolby Pro Logic II only when either the front speakers or the center speaker is set to “SMALL.”

Page 52

AV2 INPUT SELECT

You can determine the use of AV INPUT 2 jacks on the hideaway unit—select either “VIDEO” or “CAMERA.”

ENGLISH

•When the playback source is “AV2,” this setting cannot be changed.

FM IF FILTER

In some areas, adjacent stations may interfere with each other. If this interference occurs, noise may be heard.

• AUTO: When this type of interference occurs,

this unit automatically increases the tuner selectivity so that interference noise will be reduced. (But the stereo effect will also be lost.)

• WIDE: Subject to the interference from

adjacent stations, but sound quality will not be degraded and the stereo effect will not be lost.

• VIDEO:The source “AV2” works for

viewing the playback picture through the component connected to the AV INPUT 2 jacks.

• CAMERA: Select this when connecting the

rear view camera. –You can set the remaining two

items (BACK GEAR/ CAMERA VIEW).

BACK GEAR

• AUTO:The rear view through the rear view

camera is automatically displayed on the monitor when you change the gear to the back position.

• OFF: Cancels this function. To watch the

rear view, select “AV2” for the source.

CAMERA VIEW

• NORMAL:You can watch the rear view as

the camera takes.

• MIRROR:You can watch the rear view as

reflected on the mirror.

While watching the camera view, you can change it to the source playback screen by touching the center portion of the monitor screen. (In this case, you cannot change the aspect ratio and make monitor adjustments—see pages 24 and 42.)

TV CHANNEL AREA

This appears when TV tuner unit KV-C1000 is connected.

• No setting is required.

DIMMER MODE

• AUTO: Dims the display when you turn on

the headlights.

• ON: Activates dimmer.

• OFF: Cancels this function.

Page 53

Other Main Functions

○○○○○○○○○○○○○○○○○○

Assigning titles to the sources

Roman alphabets Numbers and Symbols

[Upper j Lower]

Accented characters

[Upper (x2) j Lower (x2)]

Roman alphabet list

Upper cases Lower cases

Alternates between upper and lower cases.

Moves the cursor position.

ENGLISH

Enter other character lists.

Erase all entered character.

Exit.

Numbers and Symbols list

Entered name is displayed.

Accented characters: Upper cases

Display the other page of the character list of the same type.

Accented characters: Lower cases

Space (between entered characters)

Backspace (Erase the last entry)

Confirm the entered name.

Page 54

You can assign titles to 30 FM/AM, 30 TV stations, and 40 CDs (both in this unit and in the CD changer).

Source Maximum character number

Stations:10

ENGLISH

CDs:32

•You cannot assign a title to CD Text and MP3 discs.

Prepare the source.

• For FM/AM stations: Change “FM” or

“AM,” then select a station.

• For a CD in this unit: Insert a CD.

• For CDs in the CD changer: Select

“CD-CH,” then select a disc number.

• For TV stations: Change “TV,” then

select a TV station.

If the “DELETE DISC NAME” or “DELETE STATION NAME” screen appears

The internal memory is full. Delete unwanted names before assignment.

Ex. When trying a name to a 41st disc

Select an unwanted name.

Enter a name.

Confirm.

Ex. When selecting the

first registered name

Delete.

Repeat the above steps if you want to delete more names.

Finish.

To next/previous page of the list

Page 55

Hold

○○○○○○○○○

Changing the monitor position/

○○○○○○○○○

angle

You can change the monitor position and the monitor angle.

• Once you change them, they are stored. The monitor opens at the stored position and angle, next time you eject the monitor.

To change the monitor position

To operate the car switches behind the monitor, press and hold OPEN.

The monitor change its angle to the illustrated position for about 30 seconds.

To return to its previous angle within 30 seconds, press OPEN again.

○○○○○○○○○

Removing the monitor

ENGLISH

On the main unit

To change the monitor angle

MAIN SUB

AVOUT VOL

On the remote controllerOn the main unit

then

When detaching and attaching the monitor, observe the following:

• Be careful not to drop the monitor.

• Be careful not to damage the connectors.

To detach the monitor

The monitor goes back into its compartment if it has been used, then comes out halfway.

Insert the blind cover to protect the internal mechanism from dust.

Each time you press the button, the monitor changes its angle step by step.

• By holding the button (+/–), you can easily change the angle to its extreme (+/–).

To attach the monitor

Insert the monitor into the compartment with the screen facing down.

Page 56

CD Changer Operations

•You cannot select CD changer and SIRIUS radio at the same time when Dual Mode is activated (see page 33).

ENGLISH

Dual Mode indicator (see page 33)

SOURCE icon (see pages 14 and 33)

Current disc/folder/track no.

Elapsed playing time

Playback mode Sound mode (see page 39) Surround/DSP mode (see page 36)

Volume level appears when adjusted.

Disc text/ID3 tag information area

Only for MP3

CD/CD Text

MP3

Only for CD: See page 53.

See page 14.

See page 15.

See page 39.

See pages 43 – 52.

Back to the beginning

Page 57

Basic CD Changer Operations

Select “CD-CH”

Operate the disc

: Selects the disc.

ENGLISH

then

Ex. While playing CD/CD Text*

Ex. While playing MP3

: Selects the folder (only for

MP3).

: Goes back to the beginning of

the current track, then skips to the previous tracks if pressed repeatedly.

: Skips to the following tracks if

pressed repeatedly.

* Disc text information recorded in the CD

Text can be displayed when a JVC CD Text compatible CD changer is connected.

It is recommended to use the JVC MP3-compatible CD changer with your unit.

•You can also connect the CH-X series CD changers (except CH-X99 and CH-X100). However, they are not compatible with MP3 discs, so you cannot play back MP3 discs.

•You cannot use the KD-MK series CD changers with this unit.

Before operating your CD changer:

• Refer also to the Instructions supplied with your CD changer.

• If no discs are in the magazine of the CD changer or the discs are inserted upside down, “NO DISC” will appear on the monitor. If this happens, remove the magazine and set the discs correctly.

• If no magazine is loaded in the CD changer, “NO MAGAZINE” will appear on the monitor. If this happens, insert the magazine in the CD changer.

Page 58

Advanced CD Changer Operations

○○○○○○○○○

Selecting disc/folders/tracks

You can select the disc, (folder: only for MP3),

ENGLISH

and tracks using the buttons on the main unit.

Select a disc you want.

DISC

FOLDER

TRACK

When using the remote controller

You can directly select the disc number by pressing the corresponding number buttons (1 –

12).

○○○○○○○○○

Locating a disc/folder/track using

○○○○○○○○○

the list

To locate a disc by displaying the disc list

Example: while playing MP3

To next/previous page of the list

Disc names will be shown once it is recognized.

To locate a folder by displaying the folder list

• This functions only for MP3.

• Though you play back the same disc on the CD changer, its folder list may look differently from the one you display while playing it on the main unit. This happens because CD changer can also list up the folder in which no MP3 tracks are recorded.

Page 59

Off

Auto Scroll

Scroll

Select a folder you want.

Current track name or ID3 Tag

○○○○○○○○○

Displaying the disc text

○○○○○○○○○

information

With Auto Scroll or Scroll selected, you can display the text and scroll it on the monitor if it is long and cannot be displayed at a time.

ENGLISH

To next/previous page of the list

Shaded when no MP3 files are included. You cannot select this folder.

To locate a track by displaying the track list

Example: while playing MP3

Select a track you want.

Current folder name or ID3 Tag (for MP3) Disc name (for CD) or CD Text

(For CD)

• Scroll: Text on the information area scrolls once.

• Auto Scroll: Text on the information area scrolls every 5 seconds.

•Off:The information area goes off (no text information will be shown).

(For MP3)

To next/previous page of the list

Page 60

○○○○○○○○○

Selecting playback modes

You can use only one of the following playback modes at a time—Repeat Play, Random Play, and Intro Scan.

ENGLISH

Repeat Play

You can repeat playback.

•Repeat Play cannot be deactivated.

Random Play

You can play back tracks at random.

Only for MP3

When playing CD:

REPEAT PLAY TRACK REPEAT PLAY DISC

REPEAT PLAY OFF

When playing MP3:

REPEAT PLAY TRACK REPEAT PLAY FOLDER

REPEAT PLAY DISCREPEAT PLAY OFF

REPEAT PLAY

• TRACK: Repeats the current track.

• FOLDER: Repeats the current folder.

• DISC: Repeats the current disc.

• OFF: Repeats all loaded discs in the magazine.

When playing CD:

RANDOM PLAY DISC RANDOM PLAY ALL

RANDOM PLAY OFF

When playing MP3:

RANDOM PLAY FOLDER RANDOM PLAY DISC

RANDOM PLAY ALLRANDOM PLAY OFF

RANDOM PLAY

• FOLDER: Plays randomly all tracks of the current folder, then moves to the next folder and so on.

• DISC: Plays randomly all tracks on the current disc.

• ALL: Plays randomly all tracks of all discs in the magazine.

• OFF: Cancels Random Play.

Page 61

Intro Scan

You can play back the first 15 seconds of each track sequentially.

Only for MP3

○○○○○○○○○

Searching for songs

You can use search functions to find your favorite tracks (for CD/MP3) and folders (for MP3).

Folder/Track Search

You can select a specific track (for CD/MP3) or folder (for MP3).

ENGLISH

When playing CD:

INTRO SCAN TRACK INTRO SCAN DISC

INTRO SCAN OFF

When playing MP3:

INTRO SCAN TRACK INTRO SCAN FOLDER

INTRO SCAN DISCINTRO SCAN OFF

INTRO SCAN

• TRACK: Plays the beginning of all tracks of the current disc.

• FOLDER: Plays the first tracks of all folders of the current disc (only for MP3).

• DISC: Plays the first tracks of all discs in the magazine.

• OFF: Cancels Intro Scan.

(For CD/MP3)

Enter a number, then confirm.

Ex. when playing MP3:

Clear the entry.

(For MP3)

Confirm

Page 62

External Component Operations

You can connect two video components as the playback components and an optional TV

ENGLISH

tuner unit (KV-C1000).

• When you connect the video camera as a rear view camera to the AV INPUT 2 jacks to guide you to back the car, set the usage of the AV INPUT 2 jacks correctly (see page 52).

•For connections, see the Installation/ Connection Manual (separate volume).

Select the external source

TUNER

SIRIUS

CD-CH

• AV 1 :To watch the playback pictures

through the component connected to the AV INPUT 1 jacks.

• AV 2 :To watch the playback pictures

through the component connected to the AV INPUT 2 jacks.

Playback picture will be shown in the picture view window.

DISC

AV2

• TV:To watch TV programs through

the TV tuner unit (KV-C1000).

Playback picture will be shown in the picture view window.

To use the TV tuner unit (KV-C1000), see the following pages.

AV1

Adjust the volume

To change the aspect ratio...

On the remote controller

ASPECT

On the main unit

Not available while viewing the playback picture.

Ex. When “AV1” is selected

•For details, see page 24. When you selected “CAMERA” for “AV2 INPUT” (see page 52), you cannot change the aspect ratio of AV2.

Page 63

TV Tuner Operations

Volume level appears when adjusted.

Dual Mode indicator (see page 33)

SOURCE icon (see pages 14 and 33)

Current preset no.

Channel no.

Search mode Sound mode (see page 39) Surround/DSP mode (see page 36)

Playback picture will be shown in the picture view window.

Available only after pressing “M” (below this icon).

ENGLISH

Back to the beginning

See page 53.

See page 14.

See page 15.

(Not available while viewing the

playback picture.)

See page 39.

See pages 43 – 52.

Page 64

○○○○○○○○○

Watching TV programs

•To tune in to a station using Preset Search, first store your favorite TV stations into memory (12 stations).

ENGLISH

Select TV

then

Select Search Mode

Tune in to a TV station

• For Auto Search, press either icon once.

“Auto Search” begins. When a station is received, searching stops.

• For Manual Search, press either icon

repeatedly (or hold) until a station you want is selected.

• For Preset Search, press either icon

repeatedly until a preset number you want is selected.

○○○○○○○○○

Storing stations in memory

You can preset 12 TV stations.

•To tune into a preset station, see “Watching TV programs.”

TV station automatic presetting—Auto Memory

AUTO:To start Auto Search.

MANUAL: To start Manual Search.

PRESET: To select preset station numbers

(only possible after storing stations in memory).

Start Auto Memory.

then

Local TV stations with the strongest signals are searched and stored automatically.

Page 65

Manual presetting

Tune into a TV station.

To tune in to a preset station

• See also “Watching TV programs” on page

64.

then

Select “MANUAL” (or “AUTO”).

Store the station into a preset number.

then

To select the rest of the preset stations

Select a preset number.

ENGLISH

To select the rest of the preset stations

Preset station information will be displayed.

Page 66

○○○○○○○○○

Displaying the preset list

You can store and select the preset station using the preset list on the monitor screen.

To store a station using the preset list

Tune into a TV station.

ENGLISH

To select a preset station using the preset list

• Preset numbers, channel numbers and assigned names (see page 53) of the preset TV stations are shown on the list.

To next/previous page of the list

Select “MANUAL” (or “AUTO”).

then

Store the station into a preset number.

then

To next/previous page of the list

Page 67

SIRIUS

Radio Operations

SIRIUS is a satellite radio that can deliver digital-quality sound. SIRIUS has 65 music channels (all commercial-free) and 50 channels of sports/ news/entertainment programs.

You can enjoy and control the SIRIUS radio digital entertainment channels from this unit by connecting the JVC SIRIUS radio (DLP: Down Link Processor—optionally purchased) to the CD changer jack on the rear.

GCI (Global Control Information) update:

• If channels are updated after subscription, updating starts automatically. “CHANNELS UPDATING XX%* COMPLETED” appears on the monitor (“UPDATING” appears on the display). No sound can be heard.

• Update takes a few minutes to complete.

• Do not press any button/icon or perform any operation until updating has been completed—“CHANNELS UPDATED” appears on the monitor (“CHANNELS UPDATED” scrolls on the display).

Before operating your SIRIUS radio:

•For connection, see Installation/Connection Manual (separate volume).

• Refer also to the Instructions supplied with your SIRIUS radio.

It is required to activate your SIRIUS subscription after connection:

• If the power is turned off before subscription is completed, repeat the procedure from beginning.

1 Turn on the power.

2 Select “SAT (SIRIUS).”

then

JVC DLP starts updating all the SIRIUS channels. (See GCI update on the left column.)

• Once completed, JVC DLP tunes in to the preset channel, CH184 (channel for subscription guidance).

3 Check your Sirius ID, see page 72.

ENGLISH

* Changes when every 20% of update is

completed (ex. 20%, 40%, 60%).

4 Contact SIRIUS on the internet at

<http://activate.siriusradio.com/> to activate your subscription, or you can call SIRIUS toll-free at 1-888-539SIRIUS (7474).

“SUBSCRIPTION UPDATE PRESS ANY KEY TO CONTINUE” appears on the monitor (“SUB UPDT PRESS ANY KEY” scrolls on the display) once subscription has been completed.

Page 68

ENGLISH

Volume level appears when adjusted.

Dual Mode indicator (see page 33)

SOURCE icon (see pages 14 and 33)

Signal strength bar (see page 78) Current band/Preset no.

Selected category Selected channel

Current channel no.

Search mode Sound mode (see page 39)

Surround/DSP mode (see page 36)

To change the search mode—CHANNEL Ô PRESET, (see page 69).

See page 72.

See page 69.

See page 71.

See page 14.

See page 15.

See page 39.

See pages 43 – 52.

Back to the beginning

Page 69

Listening to the SIRIUS

•You cannot select SIRIUS radio and CD changer at the same time when Dual Mode is activated (see page 33).

Select “SAT (SIRIUS)”

then

Select a band (SR1/SR2/SR3)

Radio

You can tune in to all the channels of every category by selecting “ALL.”

Select Search Mode

CHANNEL: To select channels.

PRESET: To select preset channels.

Select a channel for listening

ENGLISH

Select a category

Selecting a particular category (SPORTS, ENTERTAINMENT, etc.) allows you to enjoy only the channels from the selected category.

○○○○○○○○○

Displaying the text

○○○○○○○○○

information

With Auto Scroll or Scroll selected, you can display the text and scroll it on the monitor if it is long and cannot be displayed at a time.

• For Channel Search, press either icon

repeatedly (or hold) until a channel you want is selected.

• For Preset Search, press either icon

repeatedly until a preset number you want is selected.

• Scroll: Text on the information area scrolls once.

• Auto Scroll: Text on the information area scrolls every 5 seconds.

•Off:The information area goes off (no text information will be shown).

Page 70

○○○○○○○○○

Storing user channels in memory

You can preset 6 channels for each band.

While listening to the channel you want to store...

ENGLISH

Store the channel into a preset number.

then

○○○○○○○○○

Listening to a user preset

○○○○○○○○○

channel

then

Preset channel information will be displayed.

Preset number appears.

Ex. When preset number 4 is selected

To store a user preset channel using the list

While listening to the channel you want to store...

While listening to a channel...

To select a user preset channel using the list

While listening to a channel...

Page 71

then

• User preset numbers, channel names, song names, and artist names are shown on the list.

○○○○○○○○○

Selecting a category/channel using

○○○○○○○○○

the lists

You can select the categories/channels using the lists on the monitor screen.

While listening to a channel...

To select a category...

To select a channel...

To next/previous

page of the list

•You cannot listen to a channel with icon (it is skipped). To restore the skipped channel, see below.

○○○○○○○○○

Skipping channels

Once you skip some channels, they cannot be tuned in using / and the channel list.

While displaying the channel list (see the left column)...

Ex. To skip the 4th channel on the list.

ENGLISH

then

The first channel of the selected category is tuned in (only when you change the category).

• If you select the current category (highlighted on the screen), its channel list appears.

To next/previous

page of the list

While listening to the 4th channel on the list...

To be continued...

Page 72

ENGLISH

To next/previous page of the list

then

icon appears for the skipped channel

(4th channel).

To add (restore) the skipped channels, repeat the same procedure. (Select a skipped channel

in step

• icon goes off.

To add (restore) all skipped channels in a category, select “ALL” category before

performing the above procedure.

• If all the channels in a category are skipped, the category will also be skipped.

Change the setting or enter the setting screen.

SIRIUS ID

The SIRIUS 12-digit identification number is shown. You can neither change nor set the identification number.

• SIRIUS ID will also appear on the SETUP menu if SIRIUS radio is connected.

CLOCK AUTO ADJUST

• AUTO: The built-in clock is automatically

• OFF: Cancels this function.

TIME ZONE

If you have set “CLOCK AUTO ADJUST” to “AUTO,” select your residential area from one of the following time zone for clock adjustment.

adjusted using the clock time data provided via the SIRIUS radio channel.

○○○○○○○○○

Changing the satellite setup

You can preset the fundamental SIRIUS radio settings.

While listening to a channel...

• ALASKA: GMT–9:00

• PA CIFIC: GMT–8:00

• MOUNTAIN: GMT–7:00

• CENTRAL: GMT–6:00

• EASTERN: GMT–5:00

• ATLANTIC: GMT–4:00

• NEWFOUND LAND: GMT–3:30

DAYLIGHT SAVINGS TIME (DST)

If you have set “CLOCK AUTO ADJUST” to “AUTO” and your residential area is subject to DST, activate the DST setting.

• ON: Activates daylight savings time.

• OFF: Cancels this function.

Page 73

Maintenance

How to clean the monitor

When removing stains or dust on the surface, turn off the monitor, then wipe with dry soft cloth.

• Be careful not to scratch the surface when wiping it.

• Do not use the following materials to clean the monitor:

– Wet cloth –Volatile substance such as benzine and

thinner

– Acid detergent, alkaline detergent, and

detergent composed of organic substance

•When using chemically processed duster, read its precautions carefully.

How to clean the connectors

Frequent detachment of the monitor will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.

• Attach the blind cover to the main unit whenever the monitor is removed to protect the internal mechanism from dust.

Moisture condensation

Moisture may condense on the lens inside the disc player in the following cases:

• After starting the heater in the car.

• If it becomes very humid inside the car.

Should this occur, the disc player may malfunction. In this case, eject the disc and leave the unit turned on for a few hours until the moisture evaporates.

How to handle discs

When removing a disc from its case, press down the center

holder of the case and lift the disc out, holding it by the edges.

•Always hold the disc by the edges. Do not touch its recording surface.

When storing a disc into its case, gently insert the disc around the center holder (with the printed surface facing up).

• Make sure to store discs into the cases after use.

To keep discs clean

A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge.

• Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc.) to clean discs.

To play new discs

New discs may have some rough spots around the inner and outer edges. If such a disc is used, this unit may reject the disc. To remove these rough spots, rub the edges with a pencil or ball-point pen, etc.

Center holder

ENGLISH

Page 74

More about This Receiver

○○○○○○○○○

Operation Methods

•Touch Panel screen goes off if no operations

ENGLISH

are made on it for about 30 seconds while viewing the playback picture.

○○○○○○○○○

Basic Operations

Turning on the power

• By pressing SOURCE on the main unit, you can also turn on the power.

Turning off the power

• If you turn off the power while listening to a disc, disc play will start automatically, next time you turn on the power.

Changing the graphic screen

• If you select one of the graphic screens while playing a video source, no playback picture can be viewed.

• When you change the playback source to one of the video sources, the currently selected graphic screen is temporarily canceled in order to show the playback picture on the picture view window.

○○○○○○○○○

Radio Operations

Storing stations in memory

• When SSM is carried out for a band...

– All stations previously stored for the band

are erased and stations are stored newly.

– Received stations are preset in No.1 (lowest

frequency) to No.6 (highest frequency). When SSM is over, the station stored in No.1 will be automatically tuned in.

•When storing a station manually, a previously preset station is erased when a new station is stored in the same preset number.

•Preset stations are erased when the power supply to the memory circuit is interrupted (for example, during battery replacement). If this occurs, preset the stations again.

○○○○○○○○○

Basic Disc Operations

Caution for DualDisc playback

•The Non-DVD side of a “DualDisc” does not comply with the “Compact Disc Digital Audio” standard. Therefore, the use of NonDVD side of a DualDisc on this product may not be recommended.

General

• In this manual, words “track” and “file” are interchangeably used when referring to MP3 files and their file names.

• When a disc has been already loaded, selecting “DISC” for the playback source starts disc play.

Inserting a disc

•When a disc is inserted upside down, the disc automatically ejects.

Playing a disc

• After loading an MP3 disc, this unit will take a long readout time. This readout time varies among the disc depending on its recording conditions.

• When playing an MP3 disc, sound interruption or skipping may occur. This is caused by the disc played back—its recording condition (missing data, etc.)

•When playing a DVD/VCD, no sound comes out during x5, x10, x20, and x60* Search (* only for DVD).

•Reverse Search stops automatically when it reaches the beginning of the disc. Playback resumes at normal speed.

•For some DVD/VCDs, changing the subtitle language and audio language (or audio channel) without using the disc menu is prohibited.

• One Touch Replay works only within the same title. (For some DVDs, this function does not work.)

• While zoomed in, the picture may look coarse.

Page 75

•This unit cannot play back the files which have the data such as WMA, WAVE, ATRAC3, MPEG 2.5, etc.

•The speaker/signal indicators appear in the following cases (only for DVD/CD):

–When a different type of the digital signal is

detected, or

– When you start playback or resume

playback from pause.

Speaker indicators

SUBWFR SUBWFR

–The speaker indicators—frames of “L,”

“C,” “R,” “LS,” and “RS” light up, when the corresponding speakers are set to “LARGE” or “SMALL” (see page 51). Sounds come out of the speakers whose speaker indicators is lit on the display.

– The

“SUBWOOFER” is set to “YES” (see page

51).

– The signal indicators changes its color from

white to yellow to indicate the incoming signals—L (front left) / R (front right) / C (center) / LFE (low frequency effect) / LS (left surround) / RS (right surround) / S (monaural surround).

Changing the source

• If you change the source, playback also stops (without ejecting the disc). Next time you select “DISC” for the playback source, disc play will start automatically.

Stopping play

• Except for MP3 discs: This unit can remember the end point (until the disc is ejected), and when you start playback again, playback begins from where it has been stopped (Resume play).

•For MP3 discs: This unit can remember the last playing track (until the disc is ejected), and when you start playback again, playback begins from the beginning of the same track.

indicator lights up when

Signal indicators

Ejecting a disc

• If the ejected disc is not removed within 15 seconds, the disc is automatically inserted again into the loading slot to prevent it from dust. (Disc will not play this time.)

Displaying the disc text information

•For MP3: If no ID3 tag is recorded, folder and track names are displayed instead.

Notes on Recordable (R) and Rewritable (RW) discs

• Use only “finalized” discs.

•For DVD-R/DVD-RW: This unit can play back only discs recorded in the DVD-Video format. (Discs recorded in the DVD-VR format cannot be played.)

•For CD-R/CD-RW: This unit can play back only audio CD (CD-DA) files if a disc includes both audio CD (CD-DA) files and MP3 files.

• This unit can play back multi-session discs; however, unclosed sessions will be skipped while playing.

• Some discs may not play back on this unit because of their disc characteristics, and for the following causes: – Discs are dirty or scratched. – Discs are kept in a place where temperature

becomes extremely high.

– Moisture condensation on the lens inside

the unit. – The pickup lens inside the unit is dirty. – Discs on which the files are written with

“Packet Write” method. – There are improper recording conditions

(missing data, etc.) or media conditions

(stain, scratch, warp, etc.)

•Rewritable discs may require a longer readout time since the reflectance of rewritable discs is lower than that of regular DVD/CDs.

• Do not use following discs: – Discs with stickers, labels, or protective

seal stuck to the surface.

– Discs on which labels can be directly

printed by an ink jet printer. Using these discs under high temperatures or high humidity may cause malfunctions or damage to discs.

ENGLISH

Page 76

Notes on MP3 files

•This unit can play back MP3 files only with the extension code <.mp3> (regardless of the letter case—upper/lower).

•This unit cannot play back the files encoded in the following formats—MP3i, MP3 PRO,

ENGLISH

Layer 1, Layer 2 format.

•This unit can show the names of albums, artists (performer), and tracks of ID3 Tag (Version 1.0 and 1.1).

•This unit can show up to 64 characters on the monitor screen.

• This unit can handle only one-byte characters. Any other characters cannot be correctly displayed.

•This unit can play back MP3 files meeting the conditions below

– Bit rate: 8 kbps – 320 kbps – Sampling frequency:

48 kHz, 44.1 kHz, 32 kHz (for MPEG-1) 24 kHz, 22.05 kHz, 16 kHz (for MPEG-2)

– Disc format:

ISO 9660 Level 1/ Level 2, Romeo, Joliet, Windows long file name

•The maximum number of characters for file/ folder names varies among the disc format used (includes 4 extension characters— <.mp3>).

– ISO 9660 Level 1: 12 – ISO 9660 Level 2: 31 – Romeo/Windows long file name: 128 – Joliet: 64

• This unit can recognize 99 folders and 150 files in each folder, which recorded in 10 hierarchies.

•This unit can play back the files recorded in VBR (variable bit rate). The files recorded in VBR have a discrepancy in elapsed time display, and do not show the actual elapsed time. Especially, after performing the search function, this difference becomes noticeable.

• Playlist is not available on this unit.

•The search function works but search speed is not constant during search.

• When an optional monitor is connected to the AV OUTPUT terminal, you can view the following MP3 CONTROL screen on the optional monitor.

MP3 CONTROL REPEAT TRACK Folder : 01 / 10 spring

sumer fall winter sea

Title :

Begonia Artist : Annie Lim Album : Flowers

1 Currently activated play mode 2 Elapsed playing time of the current track 3 Cursor (highlighted position): Indicates your

selection.

4 ID3 Tag information 5 Folder column—folder names

(Ex. The first folder is selected out of 10 folders)

• Only 5 folders can be listed at a time.

6 Track column—track names

(Ex. The first track is selected out of 30 tracks in the current folder. 128 tracks are included in the disc.)

• Only 12 tracks can be listed at a time.

• Only the first 32 characters can be displayed on the monitor.

Time : 00:03:08 Track : 01 / 30 (Total 128) begonia.mp3

german chamomile.mp3 kiwi fruit.mp3 orchard grass.mp3 petunia.mp3 north pole.mp3 begonia2.mp3 german chamomile2.mp3 kiwi fruit2.mp3 orchard grass2.mp3 petunia2.mp3 north pole2.mp3

– While playing a CD, the current track and

playback mode information is displayed on the optional monitor.

Page 77

○○○○○○○○○

Dual Mode Operations

○○○○○○○○○

Monitor Adjustments

Adjusting AV OUTPUT volume

•This adjustment does not affect the volume level of the monitor inserted into the optional cradle (KV-CR100).

○○○○○○○○○

Surround Mode Operations

• Dolby Digital disc is not always encoded as multi-channel source. If it is not multichannel encoded, “Dolby Digital” cannot be selected for surround mode.

○○○○○○○○○

Sound Mode (iEQ) Operations

• If you do not want to store your current adjustment, but only to apply the adjustment to the current playback source, press RETURN on the monitor screen to go back to the operation screen of the current source. Adjustment you made remains effective until you select a sound mode.

○○○○○○○○○

Other Sound Adjustments

• If fader or balance has been set close to its extreme, appropriate surround/DSP effect may not be obtained.

• If you are using a two-speaker system, set the fader level to “0.”

•You cannot adjust the input level—Volume Adjustment—of the FM stations. If the source is FM, Volume Adjustment will not be used.

•You may not able to adjust the brightness in the following case: –You cannot make it brighter when the

ambient light is very bright.

–You cannot make it darker when the

ambient light is very dark.

○○○○○○○○○

Initial Setup—DVD MENU

MENU/AUDIO/SUBTITLE LANGUAGE

•When the language you have selected is not recorded on a disc, the original language is automatically used as the initial language. In addition, for some discs, the initial languages settings will not work as you set due to their internal disc programming.

• Language setting change cannot be effective while playing (or pausing). After you change the language setting, eject the disc and insert it (or another disc) again so that your setting takes effect.

MONITOR TYPE

• When you select “16:9 NORMAL” for a picture whose aspect ratio is 4:3, the picture slightly changes due to the process for converting the picture width.

•Even if “4:3 PS” is selected, the screen size may become “4:3 LB” with some DVDs. This depends on how they are recorded.

ENGLISH

Page 78

○○○○○○○○○

Initial Setup—AUDIO MENU/PSM

○○○○○○○○○

SIRIUS Radio Operations

• If you change the “AMP GAIN” setting from

“HIGH” to “LOW” while the volume level is set higher than “30,” the unit automatically changes the volume level to “30.”

ENGLISH

○○○○○○○○○

Other Main Functions

Assigning titles to the sources

• When the CD changer is connected, you can assign titles to CDs in the CD changer. These titles can also be shown on the display if you insert the CDs in this unit.

○○○○○○○○○

TV Tuner Operations

Storing stations in memory

•When Auto Memory is carried out...

– All TV stations previously stored are erased

and TV stations are stored newly.

– Received TV stations are preset in No.1

(lowest frequency) to No.12 (highest frequency). When Auto Memory is over, the TV station stored in No.1 will be automatically tuned in.

•When storing a TV station manually, a previously preset TV station is erased when a new TV station is stored in the same preset number.

•Preset TV stations are erased when the power supply to the memory circuit is interrupted (for example, during battery replacement). If this occurs, preset the stations again.

General

•You can connect the JVC SIRIUS radio PnP (Plug and Play), KT-SR1000 or KT-SR2000, using the JVC SIRIUS radio adapter, KS-U100K (not supplied). By turning on the power to the unit, you can turn on/off the JVC PnP. However, you cannot control it from this unit.

• Signal strength bar increases as the receiving signal improves. If no signal is received, it disappears.

•When changing the category or channel, invalid and unsubscribed channels are skipped automatically.

Skipping channels

•You cannot skip CH184.

• If all channels in a category are skipped, the category itself is also skipped.

Page 79

Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service center.

General

• Sound is sometimes interrupted.

] You are driving on rough roads.

Stop playback while driving on rough roads.

] Disc is scratched.

• Sound cannot be heard from the speakers.

] Connections are incorrect.

• No sound comes out of the subwoofer (though it is activated—set to “YES”).

] If Pro Logic II is activated with the front/

center/rear speaker size all set to “LARGE,” no sound comes out.

• Surround/DSP mode is defeated and cannot be activated.

] It is fixed to “DEFEAT” if only rear

speakers are activated (set to “LARGE” or “SMALL”).

FM/AM broadcast

• SSM automatic presetting does not work.

] Signals are too weak. Store stations

manually.

• Static noise is generated while listening to the radio.

] The antenna is not connected firmly.

Disc playback—DVD/VCD

•You cannot watch the playback pictures on the additionally purchased monitor (KV-MAV7001) in the optional cradle (KV-CR100).

] If the original monitor is not removed

from the main unit, you cannot watch the playback picture while driving.

•You cannot change the aspect ratio.

] While the GUI operation is in use, you

cannot change the aspect ratio.

•The left and right edges of the picture are missing on the screen.

] “4:3 PS” is selected when viewing on a

conventional TV (aspect ratio 4:3). Select “4:3 LB.”

•Audio language or subtitle language cannot be changed.

] For some DVDs and VCDs, changing the

language without using the disc menu is prohibited.

Disc playback—CD/CD-R/CD-RW

• Sounds are skipped or playback stops suddenly.

] Disc is warped or sticker on the disc

comes off. Do not play such a disc.

• Disc cannot be played back.

] Disc is inserted upside down.

•Tracks on the CD-R/CD-RW cannot be skipped.

] CD-R/CD-RW is not finalized.

• Disc cannot be ejected.

• Disc is not recognized.

] Disc is locked. Unlock the disc (see page

24).

] The main unit may function incorrectly.

Press SOURCE and 0 at the same time for more than 2 seconds to eject the disc.

Hold Hold

ENGLISH

Page 80

Disc playback—MP3

• Disc cannot be played back.

] MP3 tracks do not have the extension

code—<.mp3>.

] MP3 tracks are not recorded in the format

ENGLISH

compliant with ISO 9660 Level 1, ISO 9660 Level 2, Romeo, or Joliet.

• Noise is generated.

] The current track is not an MP3 file

(although it has the extension code— <.mp3>).

• Elapsed playing time is not correct.

] This sometimes occurs during play. This

is caused by how the tracks are recorded on the disc.

• Correct characters are not displayed.

] This unit can only display a limited

number of special characters (see the tables on page 53).

Initial setup—AUDIO MENU/PSM

• “SPEAKER SIZE” settings change.

] Speaker size settings are very much

related to one another. For example, if you set the FRONT speakers to “NONE,” you cannot select “NONE” for the REAR speakers.

• Rear view does not appear when you change the gear lever to the back position.

] “BACK GEAR” is to “OFF.” In this case,

you have to select “AV2” for the source to watch the rear view.

] “BACK GEAR” is to “AUTO,” but the

back gear wire is not connected to the back lamp. To check whether the wiring is correctly done or not, see page 46.

TV tuner operations

• TV tuner unit does not work at all.

] Press the reset button of the TV tuner unit.

• “TV IS NOT CONNECTED” appears on the monitor.

] TV tuner unit is disconnected. Connect it

again.

•Auto Memory does not work.

] Signals are too weak. Store TV stations

manually.

•The TV’s main power does not shut off automatically when you change the source from TV to another.

] TV is connected to the TV tuner unit.

Connect it to the hideaway unit. Remember that audio/video signals are always transmitted to the TV while it is on.

• “RESET 8” appears on the display of the main unit.

] This unit is not connected to a TV tuner

unit correctly. Connect this unit and the TV tuner unit correctly and press the reset button of the TV tuner unit.

Page 81

CD changer operations

• “CD CHANGER IS NOT CONNECTED” appears on the monitor.

] CD changer is disconnected. Connect it

again.

• “NO MAGAZINE” appears on the monitor.

] Magazine is not loaded in the CD

changer.

• “NO FILES” appears on the monitor.

] Playable files are not recorded in the disc.

• “NO DISC” appears on the monitor.

] No discs are in the magazine or the discs

are inserted upside down.

• “RESET 1” — “RESET 7” appears on the display of the main unit.

] The built-in microcomputer in the CD

changer is malfunctioning. Press the reset button of the CD changer.

• “RESET 8” appears on the display of the main unit.

] This unit is not connected to a CD

changer correctly. Connect this unit and the CD changer correctly and press the reset button of the CD changer.

SIRIUS radio operations

• “CALL 1-888-539-SIRIUS TO SUBSCRIBE” appears on the monitor (or scrolls on the display).

] Subscription has not been done. Starts

subscribing (see page 67).

• “NO SIGNAL” appears on the monitor (or scrolls on the display).

] Signals are too weak, move to an area

with stronger signals.

• “NO ANTENNA” appears on the monitor (or scrolls on the display).

] The antenna is not connected firmly.

Connect the antenna firmly.

• “INVALID CHANNEL” appears on the monitor (“INVALID CH” scrolls on the display).

] No broadcast on the selected channel.

Select another channel.

• “SKIPPED CHANNEL” appears on the monitor (“SKIPPED CH” scrolls on the display).

] The channel is skipped. Add the channel

again.

• “NO NAME” appears on the monitor.

] No text information for the selected

channel.

• “SATELLITE IS NOT CONNECTED” appears on the monitor (“RESET 8” appears on the display).

] The SIRIUS radio is disconnected.

Connect this unit and the SIRIUS radio correctly.

• No sound can be heard.

] “CHANNELS UPDATING XX%*

COMPLETED” appears on the monitor. The unit is updating the channel information and it takes a few minutes to complete.

* Changes when every 20% of update is

completed.

• SIRIUS radio does not work at all.

] The built-in microcomputer may function

incorrectly due to noise, etc. Reconnect the SIRIUS radio after a few seconds.

ENGLISH

Page 82

Additional Information

Preset iEQ mode

The table below shows the preset frequency level settings for each iEQ mode.

ENGLISH

Sound Preset equalizing values

Mode 100 Hz 300 Hz 1 kHz 3 kHz 10 kHz

FLAT 00 00000000

HARD ROCK +03 +02 00 +01 +01

R&B +03 +02 00 +01 +03

POP 00 +01 00 +01 +02

JAZZ +03 +02 +01 +02 +02

DANCE +04 +01 –02 00 +01

COUNTRY +02 +01 00 +01 +02

REGGAE +03 00 +01 +02 +03

CLASSIC +02 +02 00 +01 00

USER1 00 00 00 00 00

USER2 00 00 00 00 00

USER3 00 00 00 00 00

Graphic screens

You can select one of the following graphic screens. For details, see page 14.

You can activate the display demonstration. To cancel it, select any other graphic screen.

Playback picture will be shown in the picture view window.

While playing a video source (except DVD/VCD), select no graphic screen (in other words, select the actual playback screen); otherwise, you cannot view the playback pictures.

Page 83

LANGUAGE CODES

Code Language

AA Afar AB Abkhazian AF Afrikaans AM Ameharic AR Arabic AS Assamese AY A ymara AZ Azerbaijani BA Bashkir BE Byelorussian BG Bulgarian BH Bihari BI Bislama BN Bengali, Bangla BO Tibetan BR Breton CA Catalan CO Corsican CS Czech CY Welsh DA Danish DZ Bhutani EL Greek EO Esperanto ET Estonian EU Basque FA Persian FI Finnish FJ Fiji FO Faroese FY Frisian GA Irish GD Scots Gaelic GL Galician GN Guarani GU Gujarati HA Hausa HI Hindi HR Croatian HU Hungarian HY Armenian IA Interlingua IE Interlingue IK Inupiak IN Indonesian IS Icelandic IW Hebrew JI Yiddish JW Javanese

Code Language

KA Georgian KK Kazakh KL Greenlandic KM Cambodian KN Kannada KO Korean (KOR) KS Kashmiri KU Kurdish KY Kirghiz LA Latin LN Lingala LO Laothian LT Lithuanian LV Latvian, Lettish MG Malagasy MI Maori MK Macedonian ML Malayalam MN Mongolian MO Moldavian MR Marathi MS Malay (MAY) MT Maltese MY Burmese NA Nauru NE Nepali NL Dutch NO Norwegian OC Occitan OM (Afan) Oromo OR Oriya PA Panjabi PL Polish PS Pashto, Pushto PT Portuguese QU Quechua RM Rhaeto-Romance RN Kirundi RO Rumanian RU Russian RW Kinyarwanda SA Sanskrit SD Sindhi SG Sangho SH Serbo-Croatian SI Singhalese SK Slovak SL Slovenian SM Samoan

Code Language

SN Shona SO Somali SQ Albanian SR Serbian SS Siswati ST Sesotho SU Sundanese SV Swedish SW Swahili TA Tamil TE Telugu TG Tajik TH Thai TI Tigrinya TK Turkmen TL Tagalog TN Setswana TO Tonga TR Turkish TS Tsonga TT Tatar TW Twi UK Ukrainian UR Urdu UZ Uzbek VI Vietnamese VO Volapuk WO Wolof XH Xhosa YO Yoruba ZU Zulu

ENGLISH

Page 84

Specifications

○○○○○○○○○

Main unit

AUDIO AMPLIFIER SECTION

ENGLISH

Power Output:

Front and Rear: 20 W RMS × 4 Channels

at 4 Ω and ≤ 1% THD+N

Center: 18 W RMS × 1 Channel at

4 Ω and ≤ 1% THD+N

Signal to Noise Ratio:

80 dBA (reference: 1 W into 4 Ω)

Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Equalizer Control Range:

Frequencies:100 Hz, 300 Hz, 1 kHz, 3 kHz,

10 kHz

Level: ±10 dB

Frequency Response: 40 Hz to 20 000 Hz

TUNER SECTION

Frequency Range:

FM: 87.5 MHz to 107.9 MHz AM: 530 kHz to 1 710 kHz

[FM Tuner]

Usable Sensitivity: 11.3 dBf (1.0 µV/75 Ω) 50 dB Quieting Sensitivity: 16.3 dBf (1.8 µV/75 Ω) Alternate Channel Selectivity (400 kHz): 65 dB Frequency Response: 40 Hz to 15 000 Hz Stereo Separation: 35 dB Capture Ratio: 1.5 dB

[AM Tuner]

Sensitivity: 20 µV Selectivity: 35 dB

DVD/CD PLAYER SECTION

Signal Detection System: Non-contact optical

pickup (semiconductor laser) Number of channels: 2 channels (stereo) Frequency Response:

DVD, fs=48 kHz: 16 Hz to 22 000 Hz DVD, fs=96 kHz: 16 Hz to 44 000 Hz

VCD, CD, MP3: 16 Hz to 20 000 Hz Dynamic Range: 96 dB Signal-to-Noise Ratio:98 dB Wow and Flutter: Less than measurable limit MP3 Recording Format:

MPEG 1/2 Audio Layer 3

Max. Bit rate: 320 kbps

REMOVABLE MONITOR

Screen Size: 7 inch wide liquid crystal display Number of Pixel: 336 960 pixels

(480 vertical × 234 horizontal × 3)

Drive Method:

TFT (Thin Film Transistor) active

matrix format Color System: NTSC Aspect Ratio: 16:9 (wide) Allowable Storage Temperature:

–10°C to +60°C (14°F to 140°F) Allowable Operating Temperature:

0°C to +40°C (32°F to 104°F) Dimensions (W × H × D):

170 mm × 141 mm × 15 mm

/4 in. × 5-5/8 in. × 5/8 in.)

(6Mass: 475 g (1.1 lbs)

GENERAL

Power Requirement:

Operating Voltage: DC 14.4 V

(11 V to 16 V allowance) Grounding System: Negative ground Allowable Operating Temperature:

0°C to +40°C (32°F to 104°F)

Other Terminal:

Steering wheel remote input (OE REMOTE)

Page 85

Dimensions (W × H × D):

Installation Size:

•With sleeve-mounting plate Type B (standard)

182 mm × 52 mm × 165 mm

/16 in. × 2-1/16 in. × 6-1/2 in.)

(7-

•With sleeve-mounting plate Type A

182 mm × 52 mm × 160 mm

/16 in. × 2-1/16 in. × 6-5/16 in.)

(7-

Panel Size: 188 mm × 58 mm × 14 mm

/16 in. × 2-5/16 in. × 5/8 in.)

(7-

Mass: 2.25 kg (5.1 lbs) (including monitor)

Required space for the monitor ejection

177(7)

143.3(5-11/16)

15(5/8)

/2)

12.2(

105˚

60˚

51.8(2-1/16)

mm (in.)

CAUTION: When ejecting the monitor, keep an open space for the monitor to come out. If not, the monitor may obstruct the steering wheel and gearshift lever operations, as this may result in a traffic accident.

○○○○○○○○○

Hideaway unit

Input Terminals:

AV INPUT 1/2:

Audio: 0.5 Vrms (Left/Right) Video (composite): 1 Vp-p/75 Ω

Output Terminals (Level/Impedance):

AV OUTPUT:

Audio: 2.0 V/20 kΩ load (full scale) Video (composite): 1 Vp-p/75 Ω

PRE OUT:

Audio: 2.0 V/20 kΩ load (full scale)

Other Terminals:

System integration (TO MAIN UNIT) FM/AM antenna (FM/AM ANTENNA) AV b us (AV BUS) CD changer (TO CHANGER) Rear view camera/Center speaker (BACKCAMERA REMOTE/CENTER SPEAKER) Power cord (POWER)

Dimensions (W × H × D):

230 mm × 35 mm × 181 mm

/16 in. × 1-7/16 in. × 7-3/16 in.)

(9-

Mass: 1.3 kg (2.9 lbs)

Design and specifications are subject to change without notice.

If a kit is necessary for your car, consult your telephone directory for the nearest car audio speciality shop.

About mistracking:

Mistracking may result from driving on extremely rough roads. This does not damage the unit and the disc, but will be annoying. It is recommended to stop disc play while driving on such rough roads.

ENGLISH

Removing the control panel

To detach the control panel

To attach the control panel

Page 86

Como primer paso, por favor lea detenidamente este manual para comprender a fondo todas las

Muchas gracias por la compra de un producto JVC.

instrucciones y obtener un máximo disfrute de esta unidad.

IMPORTANTE (EE.UU.)

Este equipo se ha sometido a todo tipo de pruebas y cumple con las normas establecidas para dispositivos de Clase B, de conformidad con la Parte 15 de las reglas de la FCC (Comisión Federal de Comunicaciones). Estas reglas están diseñadas para asegurar una protección razonable contra este tipo de interferencias en las instalaciones residenciales. Este equipo genera y utiliza energía de radiofrecuencia. Si no se instala y utiliza debidamente, es decir, conforme a las instrucciones, podrían producirse interferencias en radiocomunicaciones. Sin embargo, no se garantiza que estas interferencias no se produzcan en una instalación

ESPAÑOL

determinada. Si este equipo ocasiona interferencias en la recepción de radio o televisión, lo cual puede comprobarse mediante la conexión o desconexión del equipo, el problema podrá corregirse mediante una o una combinación de las siguientes medidas: – Reoriente la antena receptora o cámbiela de lugar. –Aumente la separación entre el equipo y el aparato receptor. – Enchufe el equipo a una toma de corriente situada en un circuito distinto del aparato receptor. – Consulte a su distribuidor o a un técnico experto en radio/televisión.

Después de instalar la unidad, reinicialícela antes de realizar el siguiente procedimiento:

Cómo reposicionar su unidad

Retire el panel de control (consulte la página

85) y, a continuación, pulse el botón de reinicialización de la unidad principal utilizando un bolígrafo o una herramienta similar. Esto hará que se reinicialice el microcomputador incorporado.

También se borrarán los ajustes preestablecidos por usted—como por ejemplo, los canales preajustados o los ajustes de sonido.

• Al abrir, el monitor se coloca en su lugar.

Para fines de seguridad....

• No aumente demasiado el nivel de volumen pues es muy peligroso conducir si no se escuchan los sonidos exteriores.

• Detenga el automóvil antes de efectuar cualquier operación complicada.

IMPORTANTE PARA PRODUCTOS LÁSER

1. PRODUCTO LÁSER CLASE 1

2. PRECAUCIÓN: No abra la tapa superior. En el interior de la unidad no hay piezas que pueda reparar el usuario; encargue el servicio a personal técnico cualificado.

3. PRECAUCIÓN: Radiación láser visible e invisible en caso de apertura o con interbloqueo averiado o defectuoso. Evite la exposición directa a los haces.

PRECAUCIONES:

• No inserte ningún disco cuya forma no sea la habitual—un corazón o una flor, por ejemplo, pues se producirá una avería.

• No exponga los discos a los rayos directos del sol ni a otra fuente de calor, ni los deje en sitios sujetos a temperatura y humedad elevadas. No los deje dentro de un automóvil.

Temperatura dentro del automóvil....

Si ha dejado el automóvil estacionado durante largo tiempo en un sitio cálido o frío, no opere la unidad hasta que se normalice la temperatura del habitáculo.

Page 87

ADVERTENCIAS

• NO instale la unidad en los siguientes sitios: – donde pueda obstruir la maniobra del

volante de dirección y del cambio de engranajes, con el consiguiente riesgo de accidentes de tráfico.

– donde pueda obstruir el funcionamiento

de dispositivos de seguridad tales como bolsas de aire, pues podría resultar en un accidente fatal.

– donde pueda obstruir la visibilidad.

• NO opere la unidad mientras está maniobrando el volante de dirección, pues podría producirse un accidente de tráfico.

• El conductor no debe mirar el monitor mientras conduce.

Si el conductor mira el monitor mientras conduce, podría distraerse y producir un accidente de tráfico.

• Si necesita operar la unidad principal mientras conduce, asegúrese de mirar atentamente hacia adelante para no provocar un accidente de tráfico.

• Si no está aplicado el freno de estacionamiento, en el monitor aparecerá “EL CONDUCTOR NO DEBE MIRAR EL MONITOR MIENTRAS CONDUCE.”, y no se mostrará la imagen de reproducción.

– Esta advertencia aparece sólo cuando el

cable del freno de estacionamiento se encuentra conectado al sistema del freno de estacionamiento incorporado al automóvil (refiérase al Manual de instalación/conexión).

PRECAUCIONES sobre el monitor

• Este producto dispone de una

lámpara fluorescente que contiene una pequeña cantidad de mercurio. Algunos componentes también contienen plomo. Para fines de protección ambiental, la disposición de estos materiales podría estar reglamentada por las autoridades locales. Para solicitar información sobre la disposición y el reciclaje, sírvase ponerse en contacto con sus autoridades locales, o con Electronics Industries Alliance: http://www.eiae.org./

• El monitor incorporado a este receptor ha sido producido con tecnología de alta precisión, pero puede tener algunos puntos inefectivos. Esto es inevitable y no es ningún signo de anomalía.

• No exponga el monitor a la luz directa del sol.

•A temperaturas muy bajas o muy altas... – Se producen cambios químicos en el

interior, provocando un fallo de funcionamiento.

– Es posible que las imágenes no aparezcan

claramente o que se muevan lentamente. Es posible que las imágenes no estén sincronizadas con el sonido o que la calidad de la imagen disminuya en algunos entornos.

PRECAUCIÓN sobre el ajuste de volumen:

Los discos producen muy poco ruido al compararse con otras fuentes. Si el nivel de volumen está ajustado al sintonizador por ejemplo, se podrían dañar los altavoces debido a un repentino aumento del nivel de salida. Por consiguiente, baje el volumen antes de reproducir un disco y ajústelo al nivel deseado durante la reproducción.

ESPAÑOL

¡Importante!

Cómo leer este manual:

Para que las explicaciones sean más simples y fáciles de entender, hemos adoptado los siguientes métodos:

• Algunas notas y consejos relacionados

se explican posteriormente en las secciones de “Más acerca de este receptor” (consulte la página 74), pero no en la misma sección en que se describen las operaciones. Si desea saber

más sobre las funciones, o si tiene alguna duda, vaya a la sección pertinente y busque la respuesta.

• Las operaciones se explican sólo mediante ilustraciones, de la siguiente manera:

Pulse brevemente.

Pulse repetidamente.

Pulse uno u otro botón.

Hold

Pulse y mantenga pulsado hasta obtener la acción deseada.

Page 88

Contenido

Cómo reposicionar su unidad .......................... 2

¡Importante! (Cómo leer este manual) ............ 3

Introducción—Discos reproducibles............ 5

Guía rápida—Cómo usar los controles ....... 6

Control remoto ................................................ 6

Unidad principal (parte delantera) ................... 8

Preparativos

(Control remoto—RM-RK220) .................. 9

ESPAÑOL

Métodos de operación ................................. 10

Operaciones básicas .................................... 12

Ajuste del reloj .............................................. 13

Cambio de la fuente ....................................... 14

Cambio de la pantalla gráfica ........................ 14

Cambio del color del panel táctil ................... 14

Visualización del medidor de nivel ............... 15

Operaciones de la radio .............................. 16

Para escuchar la radio................................. 17

Cómo almacenar emisoras en la memoria ..... 18

Visualización de la lista de preajustes ........... 19

Operaciones del DVD/VCD ........................ 20

Operaciones del CD/MP3............................ 21

Operaciones básicas de los discos............... 22

Cambio de la relación de aspecto .................. 24

Prohibición de la expulsión del disco ............ 24

Selección de carpetas MP3 ............................ 24

Operación del menú del disco ....................... 25

Reproducción de escenas anteriores .............. 26

Zoom de acercamiento .................................. 26

Selección de subtítulos .................................. 27

Selección de idiomas de audio ...................... 27

Selección de vistas multiángulo .................... 28

Localización de una carpeta/pista

utilizando la lista ..................................... 29

Visualización de la información de texto

para el disco............................................. 30

Visualización de la información sobre el

tiempo ...................................................... 30

Selección de los modos de reproducción....... 30

Búsqueda de escenas o canciones.................. 31

Operaciones del modo dual ........................ 33

Selección de las fuentes ................................. 33

Ajuste del volumen AV OUTPUT ................. 34

Operaciones del modo Surround ............... 35

Introducción del modo Surround/DSP .......... 36

Activación y desactivación del modo

Surround/DSP ......................................... 37

Operaciones de los modos de sonido (iEQ) ...

Selección de los modos de sonido

preajustados ............................................. 40

Cómo almacenar sus propios modos de

sonido ...................................................... 40

Otros ajustes de sonido ............................... 41

Ajustes del monitor...................................... 42

Configuraciones iniciales—MENÚ DE DVD...

Configuraciones iniciales—MONITOR .... 45

Configuraciones iniciales—PANTALLA ... 47 Configuraciones iniciales—MENÚ DE

AUDIO/PSM .............................................. 49

Otras funciones principales ........................ 53

Asignación de títulos a las fuentes ................ 53

Cambio de la posición/ángulo del monitor .... 55

Extracción del monitor .................................. 55

Operaciones del cambiador de CD ............ 56

Operaciones básicas del cambiador de CD ... Operaciones avanzadas del cambiador

de CD .......................................................... 58

Selección de discos/carpetas/pistas ............... 58

Localización de un disco/carpeta/pista

utilizando la lista ..................................... 58

Visualización de la información de texto del

disco ........................................................ 59

Selección de los modos de reproducción....... 60

Búsqueda de canciones .................................. 61

Operaciones de los componentes externos ...

Operaciones del sintonizador de TV .......... 63

Para ver programas de TV ............................. 64

Cómo almacenar emisoras en la memoria ..... 64

Visualización de la lista de preajustes ........... 66

Operaciones de la radio SIRIUS®.............. 67

Para escuchar la radio SIRIUS

Visualización de la información del texto ..... 69

Cómo almacenar canales de usuario en la

memoria................................................... 70

Para escuchar un canal preajustado por el

usuario ..................................................... 70

Selección de una categoría/canal utilizando

las listas ................................................... 71

Omisión de canales ........................................ 71

Cambio de la configuración satélite .............. 72

Mantenimiento ............................................. 73

Más acerca de este receptor ........................ 74

Localización de averías ............................... 79

Información adicional ................................. 82

Especificaciones ........................................... 84

................ 69

Page 89

Introducción—Discos reproducibles

Discos que se pueden reproducir

En esta unidad se pueden reproducir los siguientes discos:

• DVD Vídeo: con formato de vídeo NTSC y

código de región “1”. –También se pueden reproducir

DVD-Rs y DVD-RWs grabados en formato DVD-Vídeo (consulte la página 75).

• Vídeo CD (VCD)/Audio CD

• MP3: CD-Rs y CD-RWs incluyendo archivos

MP3 con el código de extensión <mp3>. Deben ser grabados en el formato que cumpla con ISO 9660 Level 1, ISO 9660 Level 2, Romeo, y Joliet.

Con algunos discos, las operaciones realizadas pueden ser distintas de las explicadas en este manual.

Los siguientes discos no se pueden reproducir

DVD Audio, DVD-ROM, DVD-RAM, DVDRW grabados en formato DVD-VR, CD-ROM, CD-I (CD-I Ready), Photo CD, etc.

• La reproducción de estos discos generará ruidos y dañará los altavoces.

* Nota sobre el código de región

Los reproductores DVD y los discos DVD Vídeo disponen de sus propios números de códigos de región. Esta unidad puede reproducir solamente discos DVD cuyos números de código de región incluyan un “1”.

Formatos de audio digital

El Sistema puede reproducir los siguientes formatos de audio digital.

PCM Lineal: Audio digital sin comprimir, el mismo formato que el usado para los CDs y la mayoría de los masters de estudio.

Dolby Digital *: Audio digital comprimido, desarrollado por Dolby Laboratories, que permite la codificación multicanal para crear un sonido envolvente real.

DTS ** (Digital Theater Systems): Audio digital comprimido, desarrollado por Digital Theater Systems, Inc., que ofrece sonido multicanal, como Dolby Digital. Como la relación de compresión es menor que para Dolby Digital, proporciona un rango dinámico más amplio y una mejor separación.

Este producto incorpora tecnología de protección de los derechos de autor que está protegida por patentes de EE.UU. y otros derechos de propiedad intelectual. La utilización de esta tecnología de protección de los derechos de autor debe ser autorizada por Macrovision y está destinada únicamente para uso doméstico y otras formas limitadas de visionado, a menos que Macrovision lo autorice expresamente. Está prohibida la ingeniería inversa o desmontaje del aparato.

ESPAÑOL

Ejemplos:

Si inserta un disco DVD Vídeo con un código de región incorrecto

Aparecerá “¡ERROR CÓDIGO REGIONAL!” en el monitor.

•“DVD Logo” es una marca comercial de DVD Format/Logo Licensing Corporation registrado en los EE.UU., Japón y otros países.

* Fabricado bajo licencia de Dolby

Laboratories. “Dolby”, “Pro Logic” y el símbolo de la doble D son marcas comerciales de Dolby Laboratories.

** “DTS” y “DTS Digital Surround” son

marcas registradas de Digital Theater Systems, Inc.

Page 90

Guía rápida—Cómo usar los controles

○○○○○○○○○

Control remoto

AT T

ESPAÑOL

ASPECT

GUI

SET UP

TUNER

MAIN SUB

ZOOM

DUAL

AVOUT VOL

TOPMENU

RETURN

DISCOKAV

231

564

/+1

11/012

VOLUME

*1Cuando se utiliza el modo dual, el

control remoto podrá accionar ya sea la fuente principal o la secundaria, dependiendo de la configuración MAIN/ SUB.

Sólo para MP3

* *3Mientras se reproduce un DVD, se

selecciona un capítulo; en los demás casos, se selecciona el título antes o después de la reproducción.

Operaciones generales

Botones Para:

AT T

Encender la unidad principal.

Apagar la unidad principal.

Atenuar los sonidos.

TUNER

DISC

Seleccionar la banda.

Seleccionar “TUNER” y “SIRIUS”.

Seleccionar “DISC” y “CD-CH”.

Seleccionar los

componentes externos: TV = AV1 = AV2 =

VOLUME

MAIN SUB

ZOOM

DUAL

Ajustar el volumen.

Ajustar la operación principal o secundaria para el modo dual. *

Activar/desactivar el modo dual.

Ajustar el ángulo del monitor (con MAIN/SUB ajustado a MAIN).

AVOUT VOL

Ajustar el nivel de salida de AV (con MAIN/SUB ajustado a SUB).

ASPECT

GUI

SET UP

Cambiar la relación de aspecto.

Visualizar la pantalla de ajuste del monitor.

Visualizar y borrar la pantalla GUI.

Visualizar los menús de configuración.

Cambiar las opciones del

menú.

Confirmar.

Operaciones del sintonizador

Botones Para:

TUNER

231

564

: funciona si lo pulsa y mantiene pulsado.

Seleccionar la banda.

Iniciar la búsqueda automática.

Iniciar la búsqueda manual.

Cambiar los números de preajuste.

Seleccionar directamente los números de preajuste.

Page 91

Operaciones de los discos

Botones Para:

Reproducir.

Poner en pausa.

Detener.

Seleccionar capítulos/pistas.

Efectuar búsqueda.

Operaciones del cambiador de CD

Botones Para:

Seleccionar carpetas. *

Seleccionar pistas.

Efectuar búsqueda.

Cambiar discos.

luego

ZOOM

DUAL

TOPMENU

RETURN

231

564

897

11/012

Seleccionar carpetas. *

Seleccionar pistas. *

Efectuar búsqueda.

Seleccionar idioma de audio.

Seleccionar idioma de subtítulos.

Seleccionar ángulo de visión.

Hacer zoom sobre la imagen.

Visualizar el menú de disco.

Cambiar las opciones de menú.

Confirmar.

Volver a la página anterior mientras se opera el menú de disco.

Seleccionar el número de título/capítulo/pista. *

/+1

231

564

897

11/012

Operaciones del sintonizador de TV

Seleccionar los números de discos.

/+1

ESPAÑOL

Botones Para:

Iniciar la búsqueda automática.

Iniciar la búsqueda manual.

Cambiar los números de los canales preajustados.

231

564

897

11/012

Operaciones de la radio SIRIUS

Seleccionar los números de los canales preajustados.

/+1

Botones Para:

TUNER

Seleccionar la banda.

Cambiar los números de los canales preajustados.

Seleccionar canales.

Cambiar rápidamente los números de canales.

Seleccionar categorías.

231

564

Seleccionar directamente los números de canales preajustados.

Page 92

○○○○○○○○○○○○○○○○○○

Unidad principal (parte delantera)

Operaciones generales

Botones Para:

Encender la unidad principal.

Apagar la unidad principal.

Atenuar los sonidos.

Cambiar las fuentes. (La unidad se encenderá

ESPAÑOL

automáticamente, si está apagada).

Ajustar el volumen.

Cambiar la información en pantalla.

Desmontar el panel de control.

Operaciones del sintonizador

Botones Para:

Seleccionar la banda.

Iniciar la búsqueda automática.

Iniciar la búsqueda manual.

Cambiar el modo de recepción en FM.

Operaciones de los discos

Botones Para:

Expulsar el disco.

Seleccionar capítulos/pistas.

Efectuar búsqueda.

luego

Visualizar “FOLDER” = seleccionar carpetas. *

: funciona si lo pulsa y mantiene pulsado.

*1Sólo para MP3

Operaciones del cambiador de CD

Botones Para:

Seleccionar pistas.

Efectuar búsqueda.

luego

(una vez): Visualizar “DISC” = seleccionar discos. (dos veces): Visualizar “FOLDER” =

seleccionar carpetas.*

Operaciones del sintonizador de TV

Botones Para:

Iniciar la búsqueda automática.

Iniciar la búsqueda manual.

Operaciones de la radio SIRIUS

Botones Para:

Seleccionar la banda.

Seleccionar canales.

luego

Visualizar “CAT” = seleccionar categorías.

Operaciones del monitors

Botones Para:

Encender el monitor.

Apagar el monitor.

Cierre/abra el monitor. (Consulte la página 55).

Cambie el ángulo del monitor durante unos momentos. (Consulte la página 55).

Introducir/extraer el monitor.

Retirar el monitor.

Ajustar el ángulo del monitor. (Consulte la página 55).

Cambiar la relación de aspecto.

Visualizar la pantalla de ajuste del monitor.

Page 93

Preparativos (Control remoto

—RM-RK220)

(lado trasero)

Con el lado + dirigido hacia arriba

Pila de botón de litio (CR2025)

ADVERTENCIAS sobre la pila:

• No instale ninguna otra pila que no sea la CR2025 o su equivalente, pues de lo contrario, podrá explotar.

• Guarde la pila fuera del alcance de los niños. Si un niño llegara a ingerir la pila accidentalmente, acuda inmediatamente al médico.

• No debe recargar, cortocircuitar, desarmar, calentar, ni arrojar la pila al fuego. Tales acciones podrían hacer que la pila se recaliente, se agriete o que provoque un incendio.

• No deje la pila con otros objetos de metal. De hacerlo, podría recalentarse, agrietarse o provocar un incendio.

• Cuando tenga que desechar o guardar la pila, aíslela enrollando una cinta; de lo contrario, podría recalentarse, agrietarse o provocar un incendio.

• No toque la pila con pinzas u otras herramientas similares. De hacerlo, podría recalentarse, agrietarse o provocar un incendio.

ESPAÑOL

PRECAUCIÓN:

NO deje el control remoto en un lugar expuesto a la luz directa del sol (como los cubretableros) durante un tiempo prolongado. De lo contrario, se podría dañar.

El receptor está equipado con la función de control remoto en el volante de dirección.

•Para la conexión, consulte el Manual de instalación/conexión (volumen separado).

NO exponga el sensor remoto del panel de control a una luz potente (luz solar directa o iluminación artificial).

Page 94

Métodos de operación

Podrá accionar esta unidad mediante tres tipos de métodos de operación.

• Este manual de instrucciones explica principalmente las operaciones realizadas utilizando los iconos del panel táctil que aparecen en el monitor.

• Utilizando directamente los iconos del panel táctil

(Véase “CONTROL A CIEGAS” en la página 46). Presione los iconos del panel táctil directamente con los dedos (si usa guantes, quíteselos).

Ejemplos: Lo siguiente es sólo un ejemplo. En la pantalla del monitor en sí, se muestra la

ESPAÑOL

imagen de reproducción (mientras se reproduce la fuente de vídeo).

Para borrar y visualizar los iconos y las

No opere el panel táctil utilizando un bolígrafo o una herramienta similar puntiaguda (se podría dañar el panel táctil).

Ej.: Reproducción de DVD

Cambia la fuente.

indicaciones del panel táctil, pulse la parte central de la pantalla del monitor.

• Solamente se pueden borrar mientras se visualizan las imágenes de reproducción.

Indicación de la hora del reloj

Información sobre la fuente y el modo de reproducción

Cambia los modos de función (los iconos mostrados a la derecha cambian como corresponde).

Los iconos mostrados en esta columna cambian cada vez que pulsa .

Ej.: Ajuste de fader/balance

Icono de operación

(BALANCE LEFT)

Vuelve a la pantalla anterior. Icono de operación (FADER REAR)

Ventanilla de visualización de imagen

Icono de operación (FADER FRONT)

Icono de operación (BALANCE RIGHT)

Page 95

• Utilizando el Interfaz Gráfico de Usuario (GUI) desde el control remoto

Podrá utilizar el Interfaz Gráfico de Usuario tal como lo hace para tocar los iconos del panel.

Ejemplos:

GUI

SET UP

Visualice el GUI en el monitor (aparece el cursor— marco amarillo—alrededor del icono actualmente seleccionado).

• Mientras esté seleccionada una de las fuentes de vídeo, la función GUI se activa y desactiva con sólo pulsar el botón.

Para salir del modo de operación GUI, pulse de nuevo GUI para que desaparezca el marco amarillo.

Mueva el cursor hasta el icono deseado.

ESPAÑOL

Confirme.

• Utilizando directamente los botones y controles

Algunas operaciones sólo se pueden realizar mediante pulsación directa de los botones. También podrá usar los botones y controles de la unidad principal y del control remoto si tienen nombres o marcas iguales o similares a los mostrados en el panel táctil.

Ejemplos:

Para expulsar un disco cargado.

Para extraer el monitor o guardarlo en el compartimiento.

Page 96

Operaciones básicas

PRECAUCIONES sobre el monitor:

No abra ni cierre el monitor con la mano. No aplique ninguna fuerza al monitor mientras el vehículo está en movimiento. Tales acciones podrán dañar el mecanismo de carga del monitor.

ESPAÑOL

Para conectar la alimentación, utilice los botones de la unidad principal y del control remoto.

Encienda la unidad

“WAITING” se desplaza en la pantalla de la unidad principal (y sale el monitor *).

• Al salir, el monitor se enciende, aunque usted lo haya apagado.

• Con respecto al espacio requerido para expulsar el monitor, consulte la página 85.

Seleccione la fuente

TUNER

SIRIUS

CD-CH

DISC

AV2

AV1

Ajuste el volumen

Para cambiar el ángulo del monitor:

Hold

•Para los detalles, consulte la página 55.

Para reducir el volumen instantáneamente (ATT):

Para restablecer el sonido, pulse otra vez.

Para guardar el monitor en su lugar:

• Cuando se apaga la unidad, la alimentación se conecta temporalmente.

Para desconectar la alimentación:

Hold

• DISC: Si no hay ningún disco en la ranura de carga, no podrá seleccionar “DISC” como fuente de reproducción.

• CD-CH/TV/SIRIUS: Sin conectar el cambiador de CD, la unidad de sintonizador de TV, o la radio satélite (SIRIUS “CD-CH” (cambiador de CD), “TV”, ni “SIRIUS”.

), no se podrá seleccionar

* Esto depende de la configuración

“APERTURA/CIERRE AUTOMÁTICO” (consulte la página 46). Si el monitor no sale...

Page 97

○○○○○○○○○

Ajuste del reloj

También podrá ajustar el sistema de reloj a 24 horas o a 12 horas.

Mientras reproduce cualquier fuente...

Salir

Para visualizar la hora del reloj:

Al apagar la unidad, se

visualiza la hora en la pantalla de la unidad principal durante unos momentos.

ESPAÑOL

• Si los iconos del panel táctil no aparecen en el monitor, toque la parte central de la pantalla del monitor.

Aparece solamente cuando la radio SIRIUS está conectada (consulte también la página 72).

Ajuste la hora del reloj.

• Pulse para que el reloj se ponga en marcha exactamente desde 00 segundo.

En la unidad principal

Al encender la unidad...

La información mostrada en la pantalla de la

unidad principal cambia cada vez que pulsa el botón.

La información mostrada en la pantalla difiere según la fuente seleccionada.

TUNER: Frecuencia = Reloj = Banda y

N˚ de preajuste =

DISC: Tiempo de reproducción = Reloj

= N˚ de Título/Capítulo/Carpeta/ Pista =

AV1/AV2:

Nombre de la fuente = Reloj =

TV: Canal = Reloj =

TV y N˚ de preajuste =

CD-CH: Tiempo transcurrido = Reloj =

N˚ de disco = N˚ de Carpeta/Pista

SAT (SIRIUS):

N˚ de canal = Reloj = Banda y N˚ de preajuste =

No aparece para algunas fuentes.

Aparece sombreado cuando no está disponible.

AVISO: Los idiomas en pantalla de los pasos 3 y 4 de arriba se pueden cambiar utilizando la configuración “IDIOMA EN PANTALLA” (en la página 48). La unidad se expide de fábrica ajustada a “INGLÉS”.

Page 98

○○○○○○○○○

Cambio de la fuente

Mientras se reproduce cualquier fuente...

ESPAÑOL

La fuente actual aparece resaltada.

Aparece la pantalla de operación de la fuente recién seleccionada.

Otros iconos Páginas de consulta

Consulte la página 33.

○○○○○○○○○

Cambio de la pantalla gráfica

Podrá seleccionar uno de los ocho gráficos en la ventana de visualización de imágenes.

•Para cada pantalla gráfica, consulte la página

82.

La unidad se expide de fábrica con la demostración en pantalla activada, la cual se inicia automáticamente tras un período de inactividad de aproximadamente 30 segundos (excepto mientras se reproduce un DVD/VCD). Para cancelarla, seleccione una de las pantallas gráficas.

Mientras se reproduce cualquier fuente...

Ej. Mientras se escucha

una radiodifusión en FM.

•Para ver la imagen de reproducción de cualquier fuente de vídeo, seleccione la pantalla en que se visualizan las imágenes de reproducción actuales.

Consulte la página 33.

Consulte las páginas 43 – 52.

Vuelve a la pantalla anterior.

○○○○○○○○○

Cambio del color del panel

○○○○○○○○○

táctil

Podrá cambiar el color del panel táctil (excepto la ventana de visualización de imágenes) seleccionándolo entre cuatro colores preajustados—azul, plateado, rojo y negro.

Mientras se reproduce cualquier fuente...

Ej. Mientras se escucha una

radiodifusión en FM.

Page 99

○○○○○○○○○

Visualización del medidor de nivel

○○○○○○○○○

Podrá visualizar el medidor de nivel en la pantalla gráfica, seleccionándolo entre cuatro patrones preajustados.

• Mientras se está viendo la imagen de reproducción o la demostración en pantalla, no se podrá mostrar el medidor de nivel.

Mientras se reproduce cualquier fuente...

Ej. Mientras se escucha

una radiodifusión en FM.

Cómo leer la pantalla de la unidad principal:

Mientras se escucha la radio (FM/AM):

2341

1 Se enciende cuando se activa Dolby Pro

Logic II (consulte la página 36).

2 Información principal—Frecuencia/

Banda/N˚ de preajuste.

3 El indicador MO se enciende cuando el

modo de recepción en FM es “MONO”.

4 El indicador ST se enciende mientras se

recibe una radiodifusión en FM estéreo.

ESPAÑOL

Los siguientes medidores de nivel se visualizan secuencialmente.

Medidor de nivel 1

Medidor de nivel 2

Si no hay sonido entrante, el medidor de nivel no aparecerá.

Medidor de nivel 3

Medidor de nivel 4

Mientras se reproduce un disco:

21 3

1 Se enciende cuando se detecta la señal

Dolby Digital (consulte la página 36).

2 Se enciende cuando se activa Dolby Pro

Logic II (consulte la página 36).

3 Se enciende cuando se detecta la señal

DTS (consulte la página 36).

4 Información principal—Tiempo de

reproducción/N˚ de título/N˚ de capítulo/ N˚ de carpeta/N˚ de pista.

5 Se enciende cuando se detecta el disco. 6 Se enciende cuando se detecta un CD MP3.

• Es posible atenuar la intensidad de luz de la pantalla y de los botones del panel frontal (consulte la página 52).

Page 100

Operaciones de la radio

Indicador del modo dual (consulte la página 33)

Icono SOURCE (consulte las páginas 14 y 33)

N˚ de banda/de preajuste actual

ESPAÑOL

El nivel de volumen aparece al ajustarlo.

Frecuencia de la emisora

Modo de recepción en FM

Modo de búsqueda Modo de sonido (consulte la página 39) Modo Surround/DSP (consulte la página 36)

No disponible para AM.

Disponible sólo después de pulsar “M” (debajo de este icono).

Consulte la página 53.

Consulte la página 14.

Consulte la página 15.

Consulte la página 39.

Consulte las páginas 43 – 52.

Vuelta al comienzo

JVC KD-AV7010 Instruction Manual

Specifications and Main Features

Frequently Asked Questions

User Manual